When a config-file for a pv-domU has a vfb section with a vnc=0
option then a "xl create" for that domU crashes with the message
xl: libxl.c:252: libxl_defbool_val: Assertion `!libxl_defbool_is_default(db)'
failed.
and the domU hangs early in the start.
This patch fixes the cause of the assertion and let the domU start
normally.
This problem exists since xen 4.2.
Signed-off-by: Ronny Hegewald <Ronny.Hegewald@online.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
xen-unstable changeset: 26145:8b93ac0c93f3
Backport-requested-by: Ian Campbell <Ian.Campbell@xxxxxxxxxx>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
When xl is called to create a domU and there is not enough memory available,
then the autoballooning is called to extract memory from dom0. During the
ballooning a loop in libxl_wait_for_free_memory() waits unless enough memory
is available to create the domU.
But because of a variable-underflow the loop can finish too soon and xl
finally aborts with the message:
xc: error: panic: xc_dom_boot.c:161: xc_dom_boot_mem_init: can't allocate low memory for domain: Out of memory
libxl: error: libxl_dom.c:430:libxl__build_pv: xc_dom_boot_mem_init failed: Device or resource busy
libxl: error: libxl_create.c:901:domcreate_rebuild_done: cannot (re-)build domain: -3
The variable-underflow happens when freemem_slack is larger then
info.free_pages*4, because the solution of this operation is converted
implicit to a unsigned int to match the type of memory_kb.
Add a extra check for this condition to solve the problem.
Signed-off-by: Ronny Hegewald <Ronny.Hegewald@online.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
xen-unstable changeset: 26190:678718a2e565
Backport-requested-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
libxl_cpupool_list() enumerates the cpupools by "probing": calling
cpupool_info, starting at 0 and stopping when it gets an error. However,
cpupool_info will print an error when the call to xc_cpupool_getinfo() fails,
resulting in every xl command that uses libxl_list_cpupool (such as
cpupool-list) printing that error message spuriously.
Since at the moment the times we want to print the message correspond
with the use of the existing "exact" parameter, use it to decide
whether to print the message or not.
Signed-off-by: George Dunlap <george.dunlap@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
xen-unstable changeset: 26185:d66987697fe3
Backport-requested-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
When deregistering a timeout, the address of application data was
being passed to the timeout_deregister hook instead of the data
itself.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
xen-unstable changeset: 26155:babb84d9a82e
Backport-requested-by: Ian Campbell <Ian.Campbell@citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
The program xen-tmem-list-parse parses the output of xm/xl tmem-list
into human-readable format. A missing NULL terminator sometimes
causes garbage to be spewed where the two-letter pool type
should be output.
Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
xen-unstable changeset: 26147:3186c04af582
Backport-requested-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
The sysfs parser for /sys/bus/scsi/devices understands only the layout
of kernel version 2.6.16. This looks as follows:
/sys/bus/scsi/devices/1:0:0:0/block:sda is a symlink to /sys/block/sda/
/sys/bus/scsi/devices/1:0:0:0/scsi_generic:sg1 is a symlink to /sys/class/scsi_generic/sg1
Both directories contain a 'dev' file with the major:minor information.
This patch updates the used regex strings to match also the colon to
make it more robust against possible future changes.
In kernel version 3.0 the layout changed:
/sys/bus/scsi/devices/ contains now additional symlinks to directories
such as host1 and target1:0:0. This patch ignores these as they do not
point to the desired scsi devices. They just clutter the devices array.
The directory layout in '1:0:0:0' changed as well, the 'type:name'
notation was replaced with 'type/name' directories:
/sys/bus/scsi/devices/1:0:0:0/block/sda/
/sys/bus/scsi/devices/1:0:0:0/scsi_generic/sg1/
Both directories contain a 'dev' file with the major:minor information.
This patch adds additional code to walk the subdir to find the 'dev'
file to make sure the given subdirectory is really the kernel name.
In addition this patch makes sure devname is not None.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
xen-unstable changeset: 26010:cff10030c6ea
Backport-requested-by: Olaf Hering <olaf@aepfle.de>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Currently the callers of vscsi_get_scsidevices() do not pass a mask
string. This will call "lsscsi -g '[]'", which causes a lsscsi syntax
error. As a result the sysfs parser _vscsi_get_scsidevices() is used.
But this parser is broken and the specified names in the config file are
not found.
Using a mask '*' if no mask was given will call lsscsi correctly and the
following config is parsed correctly:
vscsi=[
'/dev/sg3, 0:0:0:0',
'/dev/disk/by-id/wwn-0x600508b4000cf1c30000800000410000, 0:0:0:1'
]
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
xen-unstable changeset: 26009:2dbfa4d2e107
Backport-requested-by: Olaf Hering <olaf@aepfle.de>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Currently pvscsi can not pass SCSI devices that have just a scsi_generic node.
In the following example sg3 is a control LUN for the disk sdd.
But vscsi=['4:0:2:0,0:0:0:0'] does not work because the internal 'devname'
variable remains None. Later writing p-devname to xenstore fails because None
is not a valid string variable.
Since devname is used for just informational purpose use sg also as devname.
carron:~ $ lsscsi -g
[0:0:0:0] disk ATA FK0032CAAZP HPF2 /dev/sda /dev/sg0
[4:0:0:0] disk HP P2000G3 FC/iSCSI T100 /dev/sdb /dev/sg1
[4:0:1:0] disk HP P2000G3 FC/iSCSI T100 /dev/sdc /dev/sg2
[4:0:2:0] storage HP HSV400 0950 - /dev/sg3
[4:0:2:1] disk HP HSV400 0950 /dev/sdd /dev/sg4
[4:0:3:0] storage HP HSV400 0950 - /dev/sg5
[4:0:3:1] disk HP HSV400 0950 /dev/sde /dev/sg6
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
xen-unstable changeset: 26008:eecb528583d7
Backport-requested-by: Olaf Hering <olaf@aepfle.de>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
25886:051e2a30e3fb (25894:95a971c8058f in xen-unstable) is wrong
because it assumes that xc_sharing_freed_pages etc. return -errnoval
on error. However, like other libxc calls they return -1 setting
errno.
Correct this, checking for l<0 and then testing errno against ENOSYS,
and also log the correct errno value.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
These fields need to be valid at all times. Hypervisor ensures this
even across 32/64-bit guest transitions.
This fixes a bug where wallclock time is incorrect for booting 32-bit
HVM guests.
This should be backported to Xen 4.1 and 4.2.
Signed-off-by: Keir Fraser <keir@xen.org>
Tested-and-Reported-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
xen-unstable changeset: 25908:12fa949b9060
xen-unstable date: Fri Sep 14 18:47:57 UTC 2012
libutil.h is only needed on BSDs, but not in Linux. Debian package
libbsd-dev-0.3.0-1 installed a libutil.h overlay that contains a
Perform the libutil.h check with -Werror, so we don't include this
bogus header.
Signed-off-by: Roger Pau Monne <roger.pau@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
xen-unstable changeset: 26005:cdb48f1742f3
Backport-requested-by: Ian Campbell <Ian.Campbell@citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
CentOS 5.x forked e2fs ext4 support into a different package called
e4fs, and so headers and library names changed from ext2fs to ext4fs.
Check if ext4fs/ext2fs.h and -lext4fs work, and use that instead of
ext2fs to build libfsimage. This patch assumes that if the ext4fs
library is present it should always be used instead of ext2fs.
This patch includes a rework of the ext2fs check, a new ext4fs check
and a minor modification in libfsimage to use the correct library.
Signed-off-by: Roger Pau Monne <roger.pau@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
xen-unstable changeset: 25895:98e1ba6a672a
Backport-requested-by: Ian Campbell <Ian.Campbell@citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
In commit e8d40584, it intended to check xml file size and when empty will
return, the condition should be "if os.path.getsize(xml_path) == 0" rather
then "if not os.path.getsize(xml_path) == 0".
Signed-off-by: Chuang Cao <chuang.cao@oracle.com>
Signed-off-by: Joe Jin <joe.jin@oracle.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
xen-unstable changeset: 26088:dd64a1bdbe3a
Backport-requested-by: Ian Campbell <Ian.Campbell@citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
There are two egcs in an ao initiator: the one in the AO_CREATE
function, and the one in libxl__ao_inprogress. If synchronous ao
operation generates progress events and completes immediately, the
progress callbacks end up queued in the outer egc. These callbacks
are currently only called after libxl__ao_inprogress has returned, and
keep the ao alive until they happen. This is not good because the
principle is that a synchronous ao is not supposed to survive beyond
libxl__ao_inprogress's return.
The fix is to ensure that the callbacks queued in the outer egc are
called early enough that they don't preserve the ao. This is
straightforward in the AO_INPROGRESS macro because AO_CREATE's egc is
not used inside that macro other than to destroy it. All we have to
do is destroy it a bit sooner.
This involves unlocking and relocking the ctx since EGC_FREE expects
to be called with the lock released but libxl__ao_inprogress needs it
locked. This hole in our lock tenure is fine - libxl__ao_inprogress
has such holes already.
It is still possible to use the CTX_LOCK macros for this unlock/lock
because the gc we are using is destroyed only afterwards by
libxl__ao_inprogress.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
xen-unstable changeset: 26080:25b2f53d2583
Backport-requested-by: Ian Campbell <Ian.Campbell@citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Make xl/libxl accept the long option --wait for -w to be compatible with xm.
The long options are used in the default init and sysconfig scripts.
Signed-off-by: Sander Eikelenboom <linux@eikelenboom.it>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
xen-unstable changeset: 26045:ba7198bfc679
Backport-requested-by: Ian Campbell <Ian.Campbell@citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Options for the shutdown command that are supplied behind the domain id are
ignored. In case of the default xendomains init script this means that it will
not wait for the domains to be actually shutdown.
Signed-off-by: Sander Eikelenboom <linux@eikelenboom.it>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
xen-unstable changeset: 26044:4845b5ce90e8
Backport-requested-by: Ian Campbell <Ian.Campbell@citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
If pygrub was called with --args="some thing", then this string should
be append to the kernel command line. But the last changeset
25941:795c493fe561 contained a typo, it assigns 'args' instead of 'arg'.
Rename the local variable which holds the string from the domain config
file to avoid further confusion.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
xen-unstable changeset: 26018:ecc7627ca6d7
Backport-requested-by: Ian Campbell <Ian.Campbell@citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Remove 4 from default runlevel in xenballoond.init.
Similar to what changeset 24847:0900b1c905f1 does in xencommons, remove
runlevel 4 from the other runlevel scripts. LSB defines runlevel 4 as
reserved for local use, the local sysadmin is responsible for symlink
creation in rc4.d.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
xen-unstable changeset: 26007:fe756682cc7f
Backport-requested-by: Ian Campbell <Ian.Campbell@citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Previously device ids in libxl were treated as integers meaning they
were being initialized to 0, which is a valid device id. This patch
makes devid its own type in libxl and initializes it to -1, an invalid
value.
This fixes a bug where if you try to do a xl DEV-attach multiple
time it will continuously try to reattach device 0 instead of
generating a new device id.
Signed-off-by: Matthew Fioravante <matthew.fioravante@jhuapl.edu>
Reviewed-by: George Dunlap <george.dunlap@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
xen-unstable changeset: 25988:8a073eb1e849
Backport-requested-by: Ian Campbell <Ian.Campbell@citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
If a bootloader entry in menu.lst has no additional kernel command line
options listed and the domU.cfg has 'bootargs="--args=something"' the
additional arguments from the config file are not passed to the kernel.
The reason for that incorrect behaviour is that run_grub appends arg
only if the parsed config file has arguments listed.
Fix this by appending args from image section and the config file separatly.
To avoid adding to a NoneType initialize grubcfg['args'] to an empty string.
This does not change behaviour but simplifies the code which appends the
string.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
xen-unstable changeset: 25941:795c493fe561
Backport-requested-by: Ian Campbell <Ian.Campbell@citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Without this, the api check cpp run might happen before the various
autogenerated files which are #include by libxl.h are ready.
We need to remove the api-ok file from AUTOINCS to avoid a circular
dependency. Instead, we list it explicitly as a dependency of the
object files. The result is that the api check is the last thing to
be done before make considers the preparation done and can start work
on compiling .c files into .o's.
Reported-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Tested-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
xen-unstable changeset: 25901:c51229d1522e
Backport-requested-by: Ian Campbell <Ian.Campbell@citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Currently, xentop calls clear() before drawing the screen and calling
refresh(). This causes the entire screen to be repainted from scratch
on each call to refresh(). It is inefficient and causes visible flicker
when using xentop.
This patch fixes this by calling erase() instead of clear() which overwrites
the current screen with blanks instead. The screen is then drawn as usual
in the top() function and refresh() is called. This method allows curses
to only repaint the characters that have changed since the last call
to refresh(), thus avoiding the flicker and sending fewer characters to
the terminal.
In the event the screen becomes corrupted, this patch accepts a CTRL-L
keystroke from the user which will call clear() and force a repaint of
the entire screen.
Signed-off-by: Jason McCarver <slam@parasite.cc>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
xen-unstable changeset: 25899:116f5c34354b
Backport-requested-by: Ian Campbell <Ian.Campbell@citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Print an error and exit if backend!=0 is used in conjunction with
run_hotplug_scripts. Currently libxl can only execute hotplug scripts
from the toolstack domain (the same domain xl is running from).
Added a description and workaround of this issue on
xl-network-configuration.
Signed-off-by: Roger Pau Monne <roger.pau@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
xen-unstable changeset: 25897:ff6d94944039
Backport-requested-by: Ian Campbell <Ian.Campbell@citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
vif interfaces allows the user to specify the domain that should run
the backend (also known as driver domain) using the 'backend'
parameter. This is not compatible with run_hotplug_scripts=1, since
libxl can only run the hotplug scripts from the Domain 0.
Signed-off-by: Roger Pau Monne <roger.pau@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
xen-unstable changeset: 25896:259c4e9d8adf
Backport-requested-by: Ian Campbell <Ian.Campbell@citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
On a 32 bit hypervisor xl info currently reports:
sharing_freed_memory : 72057594037927935
sharing_used_memory : 72057594037927935
Eat the ENOSYS and turn it into 0. Log and propagate other errors.
I don't have a 32 bit system handy, so tested on x86_64 with a libxc
hacked to return -ENOSYS and -EINVAL.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Andres Lagar-Cavilla <andres@lagarcavilla.org>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
xen-unstable changeset: 25894:95a971c8058f
Backport-requested-by: Ian Campbell <Ian.Campbell@citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
device_backend_callback error path always says "unable to disconnect",
but this can also happen during the connection of a device. Fix the
error message using the information in aodev->action.
Signed-off-by: Roger Pau Monne <roger.pau@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
xen-unstable changeset: 25838:2f418851f36d
Backport-requested-by: Ian Campbell <Ian.Campbell@citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Allowing user supplied kernels of arbitrary sizes, especially during
decompression, can swallow up dom0 memory leading to either virtual
address space exhaustion in the builder process or allocation
failures/OOM killing of both toolstack and unrelated processes.
We disable these checks when building in a stub domain for pvgrub
since this uses the guest's own memory and is isolated.
Decompression of gzip compressed kernels and ramdisks has been safe
since 14954:58205257517d (Xen 3.1.0 onwards).
This is XSA-25 / CVE-2012-4544.
Also make explicit checks for buffer overflows in various
decompression routines. These were already ruled out due to other
properties of the code but check them as a belt-and-braces measure.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Redefine usage of pthread_cleanup_push and _pop, to explicitly call free for
heap objects in error paths.
By the way, set a suitable errno value for an error path that had none.
Signed-off-by: Andres Lagar-Cavilla <andres@lagarcavilla.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
xen-unstable changeset: 25914:cd2a831d0a41
Backport-requested-by: Andres Lagar-Cavilla <andreslc@gridcentric.ca>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Touch the libxl.api-ok stamp file, and unconditionally put in place
the new _libxl.api-for-check. This avoids needlessly rerunning the
preprocessor on libxl.h each time we call "make".
Ensure that _libxl.api-for-check gets the CFLAGS used for xl, so that
if it is asked for in a standalone make run it can find xentoollog.h.
Remove *.api-ok on clean.
Also fix .gitignore.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
If libxlu_cfg_y.y encountered a config file error, the code generated
by bison would sometimes _both_ run the %destructor _and_ call
xlu__cfg_set_store for the same XLU_ConfigSetting* semantic value.
The result would be a double free.
This appears to be because of the use of a mid-rule action. There is
some discussion of the problems with destructors and mid-rule action
error handling in "(bison)Mid-Rule Actions". This area is complex and
best avoided.
So fix the bug by abolishing the use of a mid-rule action, which was
in any case not necessary here.
Also while we are there rename the nonterminal rule "setting" to
"assignment", to avoid confusion with the token type "setting", which
had an identically name in a different namespace. This was especially
confusing because the nonterminal "setting" did not have "setting" as
the type of its semantic value! (In fact the nonterminal, now called
"assignment", does not have a value so it does not have a value type.)
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
This incorrectly removes the $(PYTHON) variable which is used at build
time as well as by the tools.
Remove and revisit for 4.3.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
Older kernels, such as those found in Debian Squeeze:
* Have bugs in handling of AIO into foreign pages
* Have blktap modules, which will cause qemu not to use AIO, but
which are not loaded on boot.
Attempt to load blktap in xencommons, to make sure modern qemu's which
use AIO will work properly on those kernels.
Signed-off-by: George Dunlap <george.dunlap@eu.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Prefer to load blktap2 if it exists. This is the name of the driver in
classic-Xen ports, while in mainline kernels the driver is called just
blktap.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Jan Beulich <JBeulich@suse.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
LIB_PATH is no longer used, so the AX_DEFAULT_LIB macro is no longer
needed. Additionally lower case make variables are now used as
autoconf substitutions, which allows for more correct overrides at
build time.
I've checked the file layout in dist/install from the build made
before this change versus after with ./configure values of:
1) ./configure (no flags provided)
2) ./configure --libdir=/usr/lib/x86_64-linux-gnu (Debian style)
3) ./configure --libdir='${exec_prefix}/lib' (late variable expansion)
Signed-off-by: Matt Wilson <msw@amazon.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
[ ijc - reran autogen.sh ]
Committed-by: Ian Campbell <ian.campbell@citrix.com>
xend used to set the xenbus backend entry "type" to either "phy" or
"file", but now libxl sets it to "phy" for both file and block device.
We have to manually check for the type of the "param" field in order
to detect if we are trying to attach a file or a block device.
Signed-off-by: Christoph Egger <Christoph.Egger@amd.com>
Signed-off-by: Roger Pau Monne <roger.pau@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
xenconsoled expected domains that are being shutdown to end up in the
the DYING state and would only clean-up such domains. HVM domains
either didn't enter the DYING state or weren't in long enough for
xenconsoled to notice.
For every shutdown HVM domain, xenconsoled would leak memory, grow its
list of domains and (if guest console logging was enabled) leak the
log file descriptor. If the file descriptors were leaked and enough
HVM domains were shutdown, no more console connections would work as
the evtchn device could not be opened. Guests would then block
waiting to send console output.
Fix this by tagging domains that exist in enum_domains(). Afterwards,
all untagged domains are assumed to be dead and are shutdown and
cleaned up.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
c/s 25779:4ca40e0559c3 introduced a compilation error for any build
system using -Werror=uninitialized, such as the default CentOS 5.7
version of gcc.
And with good reason, because if the global libxl
default_output_format is neither OUTPUT_FORMAT_SXP nor
OUTPUT_FORMAT_JSON, the variable hand will be used before being
initialised.
The attached patch fixes the warning, and futher fixes the logic to
work correctly when a new OUTPUT_FORMAT is added to xl.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
This updates libxlu_cfg_y.[ch] to code generated by bison from
Debian squeeze (1:2.4.1.dfsg-3 i386).
There should be no functional change since there is no change to the
source file, but we will inherit bugfixes and behavioural changes from
the new version of bison. So this is more a matter of hope than
knowledge.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
This undoes some systematic changes which were made to
libxlu_cfg_l.[ch] along with manually-edited files (eg, whitespace
changes, emacs local variables) and returns these two files to exactly
the output of flex (Debian squeeze 2.5.35-10 i386).
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Ronny Hegewald
George Dunlap
Jim Fehlig
Dan Magenheimer
Olaf Hering
Ian Jackson
Keir Fraser
Roger Pau Monne
Ian Campbell
Joe Jin
Sander Eikelenboom
Stefano Stabellini
Matthew Fioravante
Bastian Blank
Jason McCarver
Andres Lagar-Cavilla
Matt Wilson
David Vrabel
Andrew Cooper