libxl__ao_inprogress needs to check (like
libxl__ao_complete_check_progress_reports) that there are no
oustanding progress callbacks.
Otherwise it might happen that we would destroy the ao while another
thread has an outstanding callback its egc report queue. The other
thread would then, in its egc_run_callbacks, touch the destroyed ao.
Instead, when this happens in libxl__ao_inprogress, simply run round
the event loop again. The thread which eventually makes the callback
will spot our poller in the ao, and notify the poller, waking us up.
This fixes an assertion failure race seen with libvirt:
libvirtd: libxl_event.c:1792: libxl__ao_complete_check_progress_reports: Assertion `ao->in_initiator' failed.
or (after "Add an assert to egc_run_callbacks")
libvirtd: libxl_event.c:1338: egc_run_callbacks: Assertion `aop->ao->magic == 0xA0FACE00ul' failed.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Ian Campbell <ian.campbell@citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
CC: Jim Fehlig <jfehlig@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
(cherry picked from commit f1335f0d7b)
(cherry picked from commit dfed6d96fd)
Break out the test in libxl__ao_complete_check_progress_reports, into
ao_work_outstanding, which reports false if either (i) the ao is still
ongoing or (ii) there is a progress report (perhaps on a different
thread's callback queue) which has yet to be reported to the
application.
No functional change.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Ian Campbell <ian.campbell@citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
CC: Jim Fehlig <jfehlig@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
(cherry picked from commit 93699882d9)
(cherry picked from commit ba683105b5)
There is no sense in trying to online (or offline) CPUs when the size of
cpumap is greater than the maximum number of VCPUs the guest can go to.
As such fail the operation if the count of CPUs to online is greater
than what the guest started with. For the offline case we do not
check (as the bits are unset in the cpumap) and let it go through.
We coalesce some of the underlying libxl_set_vcpuonline code
together which was duplicated in QMP and XenStore codepaths.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
(cherry picked from commit d83bf9d224)
Conflicts:
tools/libxl/libxl.c
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
(cherry picked from commit 0d8cbcad03)
Conflicts:
tools/libxl/libxl.c
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
(cherry picked from commit ca0f468192)
Conflicts:
tools/libxl/libxl.c
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
XenServer's VM density testing uncovered a regression when moving from
sysvinit to systemd where the file descriptor limit dropped from 4096 to
1024. (XenServer had previously inserted a ulimit statement into its
initscripts.)
One solution is to use LimitNOFILE=4096 in xenconsoled.service to match the
lost ulimit, but that is only a stopgap solution.
As Xenconsoled genuinely needs a large number of file descriptors if a large
number of domains are running, attempt to increase the limit.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
(cherry picked from commit 588df84c0d)
(cherry picked from commit 9d5b2b0102)
(cherry picked from commit a490f8df8c)
The Ocaml stub to retrieve the hypervisor console ring had a few problems.
* A single 32k buffer would truncate a large console ring.
* The buffer was static and not under the protection of the Ocaml GC lock so
could be clobbered by concurrent accesses.
* Embedded NUL characters would cause caml_copy_string() (which is strlen()
based) to truncate the buffer.
The function is rewritten from scratch, using the same algorithm as the python
stubs, but uses the protection of the Ocaml GC lock to maintain a static
running total of the ring size, to avoid redundant realloc()ing in future
calls.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
CC: Dave Scott <dave.scott@eu.citrix.com>
CC: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
Acked-by: David Scott <dave.scott@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
(cherry picked from commit 1a010ca99e)
(cherry picked from commit cfc4c43be1)
(cherry picked from commit c669c24424)
From: Ian Jackson <Ian.Jackson@eu.citrix.com>
When domain_death_xswatch_callback needed a further call to
xc_domain_getinfolist it would restart it with the last domain it
found rather than the first one it wants.
If it only wants one it will also only ask for one domain. The result
would then be that it gets the previous domain again (ie, the previous
one to the one it wants), which still doesn't reveal the answer to the
question, and it would therefore loop again.
It's completely unclear to me why I thought it was a good idea to
start the xc_domain_getinfolist with the last domain previously found
rather than the first one left un-confirmed. The code has been that
way since it was introduced.
Instead, start each xc_domain_getinfolist at the next domain whose
status we need to check.
We also need to move the test for !evg into the loop, we now need evg
to compute the arguments to getinfolist.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Reported-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Tested-by: Jim Fehlig <jfehlig@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
(cherry picked from commit 4783c99aab)
(cherry picked from commit 0b19348f3c)
(cherry picked from commit 13623d5d8e)
Some versions of markdown (specifically the one in Debian Wheezy, currently
used to generate
http://xenbits.xen.org/docs/unstable/misc/xen-command-line.html) seem to be
confused by nested lists in the middle of multi-paragraph parent list entries
as seen in the com1,com2 entry.
The effect is that the "Default" section of all following entries are replace
by some sort of hash or checksum (at least, a string of 32 random seeming hex
digits).
Workaround this issue by making the decriptions of the DPS options a nested
list, moving the existing nested list describing the options for S into a third
level list. This seems to avoid the issue, and is arguably better formatting in
its own right (at least its not a regression IMHO)
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
(cherry picked from commit ae325e94d2)
(cherry picked from commit 3e9054c523)
Various xl sub-commands take additional parameters containing = as
additional config fragments.
The handling of these config fragments has a number of bugs:
1. Use of a static 1024-byte buffer. (If truncation would occur,
with semi-trusted input, a security risk arises due to quotes
being lost.)
2. Mishandling of the return value from snprintf, so that if
truncation occurs, the to-write pointer is updated with the
wanted-to-write length, resulting in stack corruption. (This is
XSA-137.)
3. Clone-and-hack of the code for constructing the appended
config file.
These are fixed here, by introducing a new function
`string_realloc_append' and using it everywhere. The `extra_info'
buffers are replaced by pointers, which start off NULL and are
explicitly freed on all return paths.
The separate variable which will become dom_info.extra_config is
abolished (which involves moving the clearing of dom_info).
Additional bugs I observe, not fixed here:
4. The functions which now call string_realloc_append use ad-hoc
error returns, with multiple calls to `return'. This currently
necessitates multiple new calls to `free'.
5. Many of the paths in xl call exit(-rc) where rc is a libxl status
code. This is a ridiculous exit status `convention'.
6. The loops for handling extra config data are clone-and-hacks.
7. Once the extra config buffer is accumulated, it must be combined
with the appropriate main config file. The code to do this
combining is clone-and-hacked too.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Tested-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian,campbell@citrix.com>
(cherry picked from commit dd84604f35)
(cherry picked from commit 6040b3aeb3)
(cherry picked from commit 214fd40a20)
... avoiding NULL derefs when the version to use wasn't set yet (via
GNTTABOP_setup_table or GNTTABOP_set_version).
This is CVE-2015-4163 / XSA-134.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
master commit: 5d5c09d853
master date: 2015-06-11 14:44:12 +0200
These DOMCTL subops were accidentally declared safe for disaggregation
in the wake of XSA-77.
This is XSA-127 / CVE-2015-2751.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Said hypercall for large BARs can take quite a while. As such
we can require that the hypercall MUST break up the request
in smaller values.
Another approach is to add preemption to it - whether we do the
preemption using hypercall_create_continuation or returning
EAGAIN to userspace (and have it re-invocate the call) - either
way the issue we cannot easily solve is that in 'map_mmio_regions'
if we encounter an error we MUST call 'unmap_mmio_regions' for the
whole BAR region.
Since the preemption would re-use input fields such as nr_mfns,
first_gfn, first_mfn - we would lose the original values -
and only undo what was done in the current round (i.e. ignoring
anything that was done prior to earlier preemptions).
Unless we re-used the return value as 'EAGAIN|nr_mfns_done<<10' but
that puts a limit (since the return value is a long) on the amount
of nr_mfns that can provided.
This patch sidesteps this problem by:
- Setting an hard limit of nr_mfns having to be 64 or less.
- Toolstack adjusts correspondingly to the nr_mfn limit.
- If the there is an error when adding the toolstack will call the
remove operation to remove the whole region.
The need to break this hypercall down is for large BARs can take
more than the guest (initial domain usually) time-slice. This has
the negative result in that the guest is locked out for a long
duration and is unable to act on any pending events.
We also augment the code to return zero if nr_mfns instead
of trying to the hypercall.
This is XSA-125 / CVE-2015-2752.
Suggested-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
By default qemu will try to create some sort of backend for the
emulated VGA device, either SDL or VNC.
However when the user specifies sdl=0 and vnc=0 in their configuration
libxl was not explicitly disabling either backend, which could lead to
one unexpectedly running.
If either sdl=1 or vnc=1 is configured then both before and after this
change only the backends which are explicitly enabled are configured,
i.e. this issue only occurs when all backends are supposed to have
been disabled.
This affects qemu-xen and qemu-xen-traditional differently.
If qemu-xen was compiled with SDL support then this would result in an
SDL window being opened if $DISPLAY is valid, or a failure to start
the guest if not. Passing "-display none" to qemu before any further
-sdl options disables this default behaviour and ensures that SDL is
only started if the libxl configuration demands it.
If qemu-xen was compiled without SDL support then qemu would instead
start a VNC server listening on ::1 (IPv6 localhost) or 127.0.0.1
(IPv4 localhost) with IPv6 preferred if available. Explicitly pass
"-vnc none" when vnc is not enabled in the libxl configuration to
remove this possibility.
qemu-xen-traditional would never start a vnc backend unless asked.
However by default it will start an SDL backend, the way to disable
this is to pass a -vnc option. In other words passing "-vnc none" will
disable both vnc and sdl by default. sdl can then be reenabled if
configured by subsequent use of the -sdl option.
Tested with both qemu-xen and qemu-xen-traditional built with SDL
support and:
xl cr # defaults
xl cr sdl=0 vnc=0
xl cr sdl=1 vnc=0
xl cr sdl=0 vnc=1
xl cr sdl=0 vnc=0 vga=\"none\"
xl cr sdl=0 vnc=0 nographic=1
with both valid and invalid $DISPLAY.
This is XSA-119 / CVE-2015-2152.
Reported-by: Sander Eikelenboom <linux@eikelenboom.it>
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
(cherry picked from commit 91b0ae9db3)
(cherry picked from commit 6616c4d6fe)
(cherry picked from commit 84ca072f37)
In order for commit cbeeaa7d ("x86/nmi: fix shootdown of pcpus
running in VMX non-root mode")'s re-use of that fixmap entry to not
cause undesirable (in crash context) cross-CPU TLB flushes, invalidate
the fixmap entry right after use.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
master commit: 375a09cffa
master date: 2015-03-04 09:59:47 +0100
For ModRM encoded instructions with register operands we must not
overwrite ea.mem.seg (if a - bogus in that case - segment override was
present) as it aliases with ea.reg.
This is CVE-2015-2151 / XSA-123.
Reported-by: Felix Wilhelm <fwilhelm@ernw.de>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Tim Deegan <tim@xen.org>
Reviewed-by: Keir Fraser <keir@xen.org>
master commit: bcf92a5382
master date: 2015-03-10 13:45:51 +0100
... avoiding to pass hypervisor stack contents back to the caller
through space unused by the respective strings.
This is CVE-2015-2045 / XSA-122.
Signed-off-by: Aaron Adams <Aaron.Adams@nccgroup.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
master commit: fe2e079f64
master date: 2015-03-05 13:35:54 +0100
So far the value presented to the guest remained uninitialized.
This is CVE-2015-2044 / XSA-121.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
master commit: c9e57594e1
master date: 2015-03-05 13:34:54 +0100
c/s d1b93ea causes substantial functional regressions in pygrub's ability to
parse bootloader configuration files.
c/s d1b93ea itself changed an an interface which previously used exclusively
integers, to using strings in the case of a grub configuration with explicit
default set, along with changing the code calling the interface to require a
string. The default value for "default" remained as an integer.
As a result, any Extlinux or Lilo configuration (which drives this interface
exclusively with integers), or Grub configuration which doesn't explicitly
declare a default will die with an AttributeError when attempting to call
"self.cf.default.isdigit()" where "default" is an integer.
Sadly, this AttributeError gets swallowed by the blanket ignore in the loop
which searches partitions for valid bootloader configurations, causing the
issue to be reported as "Unable to find partition containing kernel"
We should explicitly check type of "default" in image_index() and process it
appropriately.
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
(cherry picked from commit 3b27981170)
(cherry picked from commit bc0ce24c8f)
Changes to handle non-numeric default attributes for grub2 caused run_grub()
to attempt to index into the images list using a string. Pull out the code
that handles submenus into a new function and use that to ensure sel is
numeric.
Reported-by: David Scott <dave.scott@citrix.com>
Signed-off-by: Simon Rowe <simon.rowe@eu.citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-and-tested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
(cherry picked from commit 4ee393f9d6)
(cherry picked from commit 7962c936a4)
Currently pygrub can only correctly parse grub2's default attribute when it is
specified as a number. If it is set to ${saved_entry} or ${next_entry} then
the first image (i.e. entry number 0) is selected. If any other value is
specified (typically this would be the string in menuentry) pygrub will crash.
This patch will allow pygrub to interpret default attribute if it is specified
as a string (note that in case of submenus only the leaf string will be
considered).
Also issue a warning if default is set to ${saved_entry} or ${next_entry}.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
(cherry picked from commit d1b93ea261)
(cherry picked from commit 3f9d2e1863)
c/s 7dd3b06ff "vmx: fix handling of NMI VMEXIT" fixed one issue but
inadvertently introduced a regression when it came to the NMI shootdown. The
shootdown code worked by patching vector 2 in each IDT, but the introduced
direct call to do_nmi() bypassed this.
Instead of patching each IDT, take a different approach by updating the
existing dispatch table. This allows for the removal of the remote IDT
patching and the removal of the nmi_crash() entry point.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
master commit: cbeeaa7da0
master date: 2015-02-11 17:18:27 +0100
and use it in preference to the direct call to do_nmi() in vmx.c
The value 'TRAP_last_reserved' was only used where 'TRAP_nr' would be more
appropriate, so is replaced.
No functional change
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
master commit: d3eb16b8a7
master date: 2015-02-11 17:16:18 +0100
NMI watchdog sets APIC_LVTPC register to generate an NMI when PMU counter
overflow occurs. This may be overwritten by VPMU code later, effectively
turning off the watchdog.
We should disable VPMU when NMI watchdog is running.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
master commit: e5e09b5c46
master date: 2015-02-03 11:30:09 +0100
"origPtr" is used as an offset into the bd->dbuf[] array. That array is
allocated in start_bunzip() and has "bd->dbufSize" number of elements so
the test here should be >= instead of >.
Later we check "origPtr" again before using it as an offset so I don't
know if this bug can be triggered in real life.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Trivial adjustments to make the respective Linux commit
b5c8afe5be51078a979d86ae5ae78c4ac948063d apply to Xen.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
master commit: 39798e95a9
master date: 2015-01-28 16:50:08 +0100
.. otherwise it has the side effect that: domain_relinquish_resources
will stop and will return to user-space with -EINTR which it is not
equipped to deal with that error code; or vcpu_reset - which will
ignore it and convert the error to -ENOMEM..
The preemption mechanism we have for domain destruction is to return
-EAGAIN (and then user-space calls the hypercall again) and as such we need
to catch the case of:
domain_relinquish_resources
->vcpu_destroy_pagetables
-> put_page_and_type_preemptible
-> __put_page_type
returns -EINTR
and convert it to the proper type. For:
XEN_DOMCTL_setvcpucontext
-> vcpu_reset
-> vcpu_destroy_pagetables
we need to return -ERESTART otherwise we end up returning -ENOMEM.
There are also other callers of vcpu_destroy_pagetables: arch_vcpu_reset
(vcpu_reset) are:
- hvm_s3_suspend (asserts on any return code),
- vlapic_init_sipi_one (asserts on any return code),
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
master commit: de4f284b3d
master date: 2015-01-26 12:51:09 +0100
Only the low 32 bits are relevant.
For consistency also change a cast on regs->eax to regs->_eax.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
master commit: ae1edef1ae
master date: 2015-01-22 12:48:40 +0100
As done by the recent Linux commit b65d6e17fe ("kvm: x86: mask out
XSAVES") for KVM, we should also mask out XSAVES from what PV guests
get to see as long as we don't emulate accesses to MSR_IA32_XSS.
Actually, go beyond that: Just like for leaf 7, switch from
blacklisting to whitelisting, i.e. only allow XSAVEOPT and XSAVEC for
the time being. And do these overrides consistently for both Dom0 and
DomU-s.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
master commit: 8d050ed109
master date: 2015-01-22 12:47:56 +0100
Xen event channels are not internal resources. They still have one end in a
domain, and are created at the request of privileged domains. This logic
which "successfully" creates a Xen event channel opens up undesirable failure
cases with ill-specified XSM policies.
If a domain is permitted to create ioreq servers or memevent listeners, but
not to create event channels, the ioreq/memevent creation will succeed but
attempting to bind the returned event channel will fail without any indication
of a permission error.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
master commit: 09aa4759fa
master date: 2015-01-20 10:42:26 +0100
XENMEM_{in,de}crease_reservation as well as XENMEM_populate_physmap
return the extent at which failure was detected, not error indicators.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Acked-by: Tim Deegan <tim@xen.org>
master commit: 76d4ff26d9
master date: 2015-01-19 11:59:05 +0100
While for us it's not as bad as it was for Linux, their commit
13e457e0ee ("KVM: x86: Emulator does not decode clflush well", by
Nadav Amit <namit@cs.technion.ac.il>) nevertheless points out two
shortcomings in our code: opcode 0F AE /7 is clflush only when it uses
a memory mode (otherwise it's SFENCE) and when there's no REP prefix
(an operand size prefix is fine, as that's CLFLUSHOPT).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
master commit: 9d03db6b81
master date: 2015-01-12 15:41:12 +0100
This can (and will) be legitimately the case when sharing page tables
with EPT (more of a problem before p2m_access_rwx became zero, but
still possible even now when other than that is the default for a
guest), leading to an unconditional crash (in print_vtd_entries())
when a DMA remapping fault occurs.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
master commit: 46e0baf591
master date: 2015-01-07 11:13:58 +0100
We need to make sure that last_vcpu is not pointing to VCPU whose
VPMU is being destroyed. Otherwise we may try to dereference it in
the future, when VCPU is gone.
We have to do this via IPI since otherwise there is a (somewheat
theoretical) chance that between test and subsequent clearing
of last_vcpu the remote processor (i.e. vpmu->last_pcpu) might do
both vpmu_load() and then vpmu_save() for another VCPU. The former
will clear last_vcpu and the latter will set it to something else.
Performing this operation via IPI will guarantee that nothing can
happen on the remote processor between testing and clearing of
last_vcpu.
We should also check for VPMU_CONTEXT_ALLOCATED in vpmu_destroy() to
avoid unnecessary percpu tests and arch-specific destroy ops. Thus
checks in AMD and Intel routines are no longer needed.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
master commit: ed80171556
master date: 2015-01-07 11:12:27 +0100
Commit 545607eb3c ("x86: fix various issues with handling guest IRQs")
wasn't really consistent in one respect: The granting of access to an
IRQ shouldn't assume the pIRQ->IRQ translation to be the same in both
domains. In fact it is wrong to assume that a translation is already/
still in place at the time access is being granted/revoked.
What is wanted is to translate the incoming pIRQ to an IRQ for
the invoking domain (as the pIRQ is the only notion the invoking
domain has of the IRQ), and grant the subject domain access to
the resulting IRQ.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reported-by: Sander Eikelenboom <linux@eikelenboom.it>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
master commit: 6fb3a07bc0
master date: 2015-01-05 10:20:24 -0500
Matthew Daley
Ian Jackson
Konrad Rzeszutek Wilk
Andrew Cooper
Ian Campbell
Jan Beulich
Vadim A. Misbakh-Soloviov
Aaron Adams
Boris Ostrovsky
Simon Rowe
Dan Carpenter