In 19284:0942BAA2A088 provision was made for running vnc and sdl
simultaneously. However, arrangements for saving and restoring the
new structure-configuration, and arrangements for allowing the new
code to load old savefiles, were not made.
This patch adds these facilities. Amongst other things, HVM VNC
save/restore will now work properly again.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
When the guest(pv-on-hvm guest that cannot suspend) reboot in
LiveMigration, the disconnecting of src-side is not transmitted to
dist-side. As a result, the error processing on the dist side is not
executed.
Signed-off-by: Tomonari Horikoshi <t.horikoshi@jp.fujitsu.com>
The suspend event channel functions are arch independent code
which xc_save uses.
The changeset of 19382:a5f497f02e34 cause link error on ia64.
This patch moves the functions into arch common file from
x86 specific file xc_domain_save.c
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Currently a slot may be specified for a hot-plug device,
but not for a pass-through device that is inserted at boot time.
This patch adds support for the latter.
The syntax is:
BUS:DEV.FUNC[@VSLOT]
e.g: 0000:00:1d:0@7
This may be important as recent changes that allow any free PCI
slot to be used for pass-through (and hotplug) may case pass-through
devices to be assigned in different locations to before. Amongst
other things, specifying the slot will allow users to move them
back, if there is a need.
Signed-off-by: Simon Horman <horms@verge.net.au>
Current scheduler only care performance, thus always picks pCPU from
the most idle package. This knob provides another option to pick pCPU from
least idle package, for user who want performance power balance.
Signed-off-by: Yu Ke <ke.yu@intel.com>
Signed-off-by: Tian Kevin <kevin.tian@intel.com>
Calculate cpu actual average freq according to aperf and mperf MSR and
then deliver to libxc interface
Signed-off-by: Liu, Jinsong <jinsong.liu@intel.com>
This bug causes some pages not to be properly freed by xen, hence
after a cycle of 50 save\restore we don't have enough spare memory to
start 2 VMs any more. This patch fixes the issue properly unmapping
all the pages needed by the shared ring.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
The reason is that tsc stops and it causes the inaccuracy.
And later we can write some scripts based on this patch.
Signed-off-by: Guanqun Lu <guanqun.lu@intel.com>
Remove some unused variables and replaces read and write
to the pipe with read_exact and write_exact (these two functions are
implemented in libxc, that we have to link anyway).
This allows fs-backed to be compiled with -D_FORTIFY_SOURCE=2, hence
should fix the problems reported by Boris.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
When XenAPI is available, xm scsi-attach fails. Also xm new and
xm create fail if a vscsi parameter is defined into domain
configuration files.
Signed-off-by: Masaki Kanno <kanno.masaki@jp.fujitsu.com>
If domU frame buffer configuration has no vnclisten attribute set, use
the global vnc-listen address specified in xend configuration file
when updating vfb location. Currently the hardcoded value 'localhost'
is used.
Signed-off-by: Jim Fehlig <jfehlig@novell.com>
When XenAPI is available, xm new and xm create fail.
# xm new vm1
Using config file "/etc/xen/vm1".
Attribute 's3_integrity' not declared
# xm create vm1
Using config file "/etc/xen/vm1".
Attribute 's3_integrity' not declared
This patch adds an s3_integrity into create.dtd.
Signed-off-by: Masaki Kanno <kanno.masaki@jp.fujitsu.com>
Rather than use "0x0" to signify that the hotplug slot should
be automatically selected by qemu-dm, define AUTO_PHP_SLOT_STR.
At the same time, change the magic value form 0x0 to 0xff,
in line with changes made to qemu-dm to allow any unused PCI
device to be used for hotplug.
Signed-off-by: Simon Horman <horms@verge.net.au>
When a udev event is received, udevevent.py parses the udev data and
tells XendNode.py to update the physical resource information.
This patch also add a boolean parameter 'xend-udev-event-server', to
let users indicate whether we should enable this function or not.
Signed-off-by: Yosuke Iwamatsu <y-iwamatsu@ab.jp.nec.com>
Add __classes_lock to protect __classes, since it can be modified by
the udev listener thread.
Signed-off-by: Yosuke Iwamatsu <y-iwamatsu@ab.jp.nec.com>
Introduce SocketDgramListener and UnixDgramListener classes.
We already have STREAM (connection) type socket listener classes in
the source tree, but we need DGRAM (connectionless) type listeners to
receive udev events.
Signed-off-by: Yosuke Iwamatsu <y-iwamatsu@ab.jp.nec.com>
CPU topology info is necessary for power management analysis. For
example, to analysis the effect of Px state coordination, Cx
package/core coordination, the thread/core/socket topology
information is needed.
This patch add new command "get-cpu-topology" in xenpm to print the
CPU topology info:
Signed-off-by: Yu Ke <ke.yu@intel.com>
In the case of a host OS without lsscsi command, xm scsi-attach
command fails even if you specify existing SCSI device.
Signed-off-by: Masaki Kanno <kanno.masaki@jp.fujitsu.com>
This patch moves a call processing of a domain reset processing
from xm to xend. Also, it adds a reset argument to do_dump() of
SrvDomain.py.
Signed-off-by: Masaki Kanno <kanno.masaki@jp.fujitsu.com>
Until now the udev script for blktap devices needs to decide if to
signal success or failure to xend. As this script runs completely
independent of blktapctrl and tapdisk/ioemu which do the real work,
the udev script can't even theoretically know if tapdisk is happy.
This patch removes the udev script and replaces its checks by new
ones in libblktap.
Signed-off-by: Kevin Wolf <kwolf@suse.de>
Connections to ioemu have single_handler set, so they are closed as
soon as all images of a certain type are closed. This is wrong with
ioemu: All images that belong to the same domain are handled by the
same backend process (usually qemu-dm, but also tapdisk-ioemu for
domains without device model), regardless of the image type.
This patch checks for the same-domain condition for ioemu connections.
Signed-off-by: Kevin Wolf <kwolf@suse.de>
Currently all disk types that are supported are defined in a header
file private to blktapctrl and tapdisk. When restoring ioemu as a
backend for blktap these constants are needed by ioemu, so move them
to a more public header file.
Signed-off-by: Kevin Wolf <kwolf@suse.de>
This patch adds support for specifying the backend (tapdisk or ioemu)
to blktapctrl. Images can be specified e.g. as tap:tapdisk:aio,
tap:ioemu:qcow2 or tap:vmdk. When omitting the backend, a default is
chosen based on the image type (currently always tapdisk because ioemu
as a backend is broken until a follow-up patch series against qemu-xen
is applied)
Signed-off-by: Kevin Wolf <kwolf@suse.de>
attached patch fixes a regression in c/s 19330 which
prevents to start guests on a Linux Dom0.
Signed-off-by: Christoph Egger <Christoph.Egger@amd.com>
This is a corrected version of a patch commited as c/s 19250 and
reverted by c/s 19314. Thanks to "trap sigerr ERR" in
xen-hotplug-common.sh the xen-hotplug-cleanup would exit when reading
/local/domain/ID/vm fails thus skipping all the xenstore-rm lines in
the rest of the script.
Change deviceDestroy behavior to remove /vm/UUID/device/...
path only when force was used (as it already does so for both frontend
and backend) and do the removing from xen-hotplug-cleanup script when
we are sure the device is really not attached to the guest any more.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Keir Fraser