Being able to recognize that "par" is reliably initialized on the 1st
loop iteration requires not overly old compilers.
Fixes: 7809132b1a ("tools/xen-9pfsd: add 9pfs response generation support")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Currently, lsevtchn aborts its event channel enumeration when it hits
an event channel that is owned by Xen.
lsevtchn does not distinguish between different hypercall errors, which
results in lsevtchn missing potential relevant event channels with
higher port numbers.
Use the errno macro to distinguish between hypercall errors, and
continue event channel enumeration if the hypercall error is not
critical to enumeration.
Signed-off-by: Matthew Barnes <matthew.barnes@cloud.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
Do as was decided in Lisbon. Reportedly Xen hasn't been working very
well on those processors anyway.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-By: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
To change the cd-rom medium, libxl will:
- QMP eject the medium from QEMU
- block-detach the old PV disk
- block-attach the new PV disk
- QMP change the medium to the new PV disk by fdset-id
The QMP code is reused, and remove and attach are implemented here.
The stubdom must internally handle adding /dev/xvdc to the appropriate
fdset. libxl in dom0 doesn't see the result of adding to the fdset as
that is internal to the stubdom, but the fdset's opaque fields will be
set to stub-devid:$devid, so libxl can identify it. $devid is common
between the stubdom and libxl, so it can be identified on both side.
The stubdom will name the device xvdY regardless of the guest name hdY,
sdY, or xvdY, but the stubdom will be assigned the same devid
facilitating lookup. Because the stubdom add-fd call is asynchronous,
libxl needs to poll query-fdsets to identify when add-fd has completed.
For cd-eject, we still need to attach the empty vbd. This is necessary
since xenstore is used to determine that hdc exists. Otherwise after
eject, hdc would be gone and the cd-insert would fail to find the drive
to insert new media.
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Signed-off-by: Jason Andryuk <jason.andryuk@amd.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
xeninfo.pl was introduced in commit 1b0a8bb57e ("Added xeninfo.pl, a script
for collecting statistics from Xen hosts using the Xen-API") and has been
touched exactly twice since to remove hardcoded IP addresses and paths.
The configuration files in vnc/* date from when we had a vendered version of
Qemu living in the tree.
These have never (AFAICT) been wired into the `make install` rule.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
HVMLoader is a single freestanding 32bit program with no external
dependencies. Use the fastcall calling convetion (up to 3 parameters in
registers) globally, which is more efficient than passing all parameters on
the stack.
Some bloat-o-meter highlights are:
add/remove: 0/0 grow/shrink: 3/118 up/down: 8/-3004 (-2996)
Function old new delta
...
hvmloader_acpi_build_tables 1125 961 -164
acpi_build_tables 1277 1081 -196
pci_setup 4756 4516 -240
construct_secondary_tables 1689 1447 -242
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
"$dev" needs to be set correctly for backendtype=phy as well as
backendtype=tap. Move the setting into the conditional, so it can be
handled properly for each.
(dev could be captured during tap-ctl allocate for blktap module, but it
would not be set properly for the find_device case. The backendtype=tap
case would need to be handled regardless.)
Fixes: f16ac12bd4 ("hotplug: Restore block-tap phy compatibility")
Fixes: 76a484193d ("hotplug: Update block-tap")
Signed-off-by: Jason Andryuk <jason.andryuk@amd.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
It's very rude for a library to play with signals behind the back of the
application, no matter ones views on the default behaviour of SIGPIPE under
POSIX. Even if the application doesn't care about the xenstored socket, it my
care about others.
This logic has existed since xenstore/xenstored was originally added in commit
29c9e570b1 ("Add xenstore daemon and library") in 2005.
It's also unnecessary. Pass MSG_NOSIGNAL when talking to xenstored over a
pipe (to avoid sucumbing to SIGPIPE if xenstored has crashed), and forgo any
playing with the signal disposition.
This has a side benefit of saving 2 syscalls per xenstore request.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jason Andryuk <jason.andryuk@amd.com>
With the input data now conveniently arranged, use writev()/sendmsg() instead
of decomposing it into write() calls.
This causes all requests to be submitted with a single system call, rather
than at least two. While in principle short writes can occur, the chances of
it happening are slim given that most xenbus comms are only a handful of
bytes.
Nevertheless, provide {writev,sendmsg}_exact() wrappers which take care of
resubmitting on EINTR or short write.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jason Andryuk <jason.andryuk@amd.com>
Right now there are two completely different struct xs_handle definitions,
depend on #ifdef USE_PTHREAD. One is quite well hidden, and often escapes
updates.
Rework struct xs_handle using some interior ifdefary. It's slightly longer,
but much easier to follow. Importanly, this makes it much harder to forget
the !PTHREAD case when adding a "common" variable.
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jason Andryuk <jason.andryuk@amd.com>
We would like to writev() the whole outgoing message, but this is hard given
the current need to prepend the locally-constructed xsd_sockmsg.
Instead, have the caller provide xsd_sockmsg in iovec[0]. This in turn drops
the 't' and 'type' parameters from xs_talkv().
Note that xs_talkv() may alter the iovec structure. This may happen when
writev() is really used under the covers, and it's preferable to having the
lower levels need to duplicate the iovec to edit it upon encountering a short
write. xs_directory_part() is the only function impacted by this, and it's
easy to rearrange to be compatible.
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jason Andryuk <jason.andryuk@amd.com>
If the sum of iov element lengths overflows, the XENSTORE_PAYLOAD_MAX can
pass, after which we'll write 4G of data with a good-looking length field, and
the remainder of the payload will be interpreted as subsequent commands.
Check each iov element length for XENSTORE_PAYLOAD_MAX before accmulating it.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jason Andryuk <jason.andryuk@amd.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
The build integration script for oss-fuzz targets. Future fuzzing targets can
be added to this script and those targets will be automatically picked up by
oss-fuzz without having to open separate PRs on the oss-fuzz repo.
Signed-off-by: Tamas K Lengyel <tamas@tklengyel.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
This target enables integration into oss-fuzz. Changing invalid input return
to -1 as values other then 0/-1 are reserved by libfuzzer. Also adding the
missing __wrap_vsnprintf wrapper which is required for successful oss-fuzz
build.
Signed-off-by: Tamas K Lengyel <tamas@tklengyel.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
xen-hvmcrash would previously save records, overwrite the instruction
pointer with a bogus value, and then restore them to crash a domain
just enough to cause the guest OS to memdump.
This approach is found to be unreliable when tested on a guest running
Windows 10 x64, with some executions doing nothing at all.
Another approach would be to trigger NMIs. This approach is found to be
unreliable when tested on Linux (Ubuntu 22.04), as Linux will ignore
NMIs if it is not configured to handle such.
Injecting a double fault abort to all vCPUs is found to be more
reliable at crashing and invoking memdumps from Windows and Linux
domains.
This patch modifies the xen-hvmcrash tool to inject #DF to all vCPUs
belonging to the specified domain, instead of overwriting RIP.
Signed-off-by: Matthew Barnes <matthew.barnes@cloud.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
This appears to been missed from the previous attempt in 2007.
Fixes: fed1946117 ("xenstore: Remove broken and unmaintained test code")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
This target enables integration into oss-fuzz. Changing invalid input return
to -1 as values other then 0/-1 are reserved by libfuzzer. Also adding the
missing __wrap_vsnprintf wrapper which is required for successful oss-fuzz
build.
Signed-off-by: Tamas K Lengyel <tamas@tklengyel.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
The final user was blktap2, removed in Xen 4.13.
Strip out the ./configure check for it, and stop explicitly installing it in
the FreeBSD testing.
Fixes: 2a556b63a2 ("Drop blktap2")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Release-Acked-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
set_cloexec() had a bit too much copy&pate from setnonblock(), and
insufficient testing on ancient versions of Linux...
As written (emulating ancient linux by undef'ing O_CLOEXEC), strace shows:
open("/dev/xen/xenbus", O_RDWR) = 3
fcntl(3, F_GETFL) = 0x8002 (flags O_RDWR|O_LARGEFILE)
fcntl(3, 0x8003 /* F_??? */, 0x7ffe4a771d90) = -1 EINVAL (Invalid argument)
close(3) = 0
which is obviously nonsense.
Switch F_GETFL -> F_GETFD, and fix the second invocation to use F_SETFD. With
this, strace is rather happer:
open("/dev/xen/xenbus", O_RDWR) = 3
fcntl(3, F_GETFD) = 0
fcntl(3, F_SETFD, FD_CLOEXEC) = 0
Fixes: bf7c146470 ("tools/libxs: Fix CLOEXEC handling in get_dev()")
Reported-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Release-Acked-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
We previously upped the minimum python version to 2.7, but neglected to
reflect this in ./configure
Fixes: 2a353c048c ("tools: Don't use distutils in configure or Makefile")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Release-Acked-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
This was clearly written by a C programmer, rather than a python programmer.
Drop all the useless semi-colons.
The very final line of the script simply references f.close, rather than
calling the function. Switch to using a with: statement, as python does care
about unclosed files if you enable enough warnings.
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
Release-Acked-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Prior to the split, "the clients" used tools/xenstored/Makefile.common whose
clean rule includes *.o whereas after the split, the removal of *.o was lost
by virtule of not including Makefile.common any more.
This is the bug behind the following build error:
make[2]: Entering directory '/local/xen.git/tools/xs-clients'
gcc xenstore_client.o (snip)
/usr/bin/ld: xenstore_client.o: relocation R_X86_64_32S against `.rodata' can not be used when making a PIE object; recompile with -fPIE
/usr/bin/ld: failed to set dynamic section sizes: bad value
collect2: error: ld returned 1 exit status
make[2]: *** [Makefile:35: xenstore] Error 1
which was caused by `make clean` not properly cleaning the tree as I was
swapping between various build containers.
Switch to a plain single-colon clean rule.
Fixes: 5c293058b1 ("tools/xenstore: move xenstored sources into dedicated directory")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Release-Acked-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
xs_fileno() opens a pipe on first use to communicate between the watch thread
and the main thread. Nothing ever sets CLOEXEC on the file descriptors.
Check for the availability of the pipe2() function with configure. Despite
starting life as Linux-only, FreeBSD and NetBSD have gained it.
When pipe2() isn't available, try our best with pipe() and set_cloexec().
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Anthony PERARD <anthony.perard@vates.tech>
get_socket() opens a socket, then uses fcntl() to set CLOEXEC. This is racy
with exec().
Open the socket with SOCK_CLOEXEC. Use the same compatibility strategy as
O_CLOEXEC on ancient versions of Linux.
Reported-by: Frediano Ziglio <frediano.ziglio@cloud.com>
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Anthony PERARD <anthony.perard@vates.tech>
Move the O_CLOEXEC compatibility outside of an #ifdef USE_PTHREAD block.
Introduce set_cloexec() to wrap fcntl() setting FD_CLOEXEC. It will be reused
for other CLOEXEC fixes too.
Use set_cloexec() when O_CLOEXEC isn't available as a best-effort fallback.
Fixes: f4f2f3402b ("tools/libxs: Open /dev/xen/xenbus fds as O_CLOEXEC")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Anthony PERARD <anthony.perard@vates.tech>
xc_dom_alloc_segment() is passed a size in bytes, calculates a size in pages
from it, then fills in the new segment information with a bytes value
re-calculated from the number of pages.
This causes the module information given to the guest (MB, or PVH) to have
incorrect sizes; specifically, sizes rounded up to the next page.
This in turn is problematic for Xen. When Xen finds a gzipped module, it
peeks at the end metadata to judge the decompressed size, which is a -4
backreference from the reported end of the module.
Fill in seg->vend using the correct number of bytes.
Fixes: ea7c8a3d0e ("libxc: reorganize domain builder guest memory allocator")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Anthony PERARD <anthony.perard@vates.tech>
Release-Acked-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
xenalyze sets argp_program_bug_address to my old Citrix address. This
was done before xenalyze was in the xen.git tree; and it's the only
program in the tree which does so.
Now that xenalyze is part of the normal Xen distribution, it should be
obvious where to report bugs.
Signed-off-by: George Dunlap <george.dunlap@cloud.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Release-Acked-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
After the following commit:
3bc14e4fa4 ("tools/libs/light: Add vlan field to libxl_device_nic")
xl list -l aborts with a double free error if a domain has at least
one vif defined:
$ sudo xl list -l
free(): double free detected in tcache 2
Aborted
Orginally, the vlan field was called vid and was defined as an integer.
It was appropriate to call libxl__xs_read_checked() with gc passed as
the string data was copied to a different variable. However, the final
version uses a string data type and the call should have been changed
to use NOGC instead of gc to allow that data to live past the gc
controlled lifetime, in line with the other string fields.
This patch makes the change to pass NOGC instead of gc and moves the
new code to be next to the other string fields (fixing a couple of
errant tabs along the way), as recommended by Jason.
Fixes: 3bc14e4fa4 ("tools/libs/light: Add vlan field to libxl_device_nic")
Signed-off-by: Leigh Brown <leigh@solinno.co.uk>
Reviewed-by: Jason Andryuk <jason.andryuk@amd.com>
Acked-by: Anthony PERARD <anthony.perard@vates.tech>
Release-acked-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
backendtype=phy using the blktap kernel module needs to use write_dev,
but tapback can't support that. tapback should perform better, but make
the script compatible with the old kernel module again.
Fixes: 76a484193d ("hotplug: Update block-tap")
Signed-off-by: Jason Andryuk <jason.andryuk@amd.com>
Acked-by: Anthony PERARD <anthony.perard@vates.tech>
Release-Acked-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Michal reported that the gitlab CI is failing because of this series
[1].
This reverts commit 6f9d90ea94.
Signed-off-by: Julien Grall <jgrall@amazon.com>
There are use cases (for example using the PV driver) in Dom0less
setup that require Dom0less DomUs start immediately with Dom0, but
initialize XenStore later after Dom0's successful boot and call to
the init-dom0less application.
An error message can seen from the init-dom0less application on
1:1 direct-mapped domains:
```
Allocating magic pages
memory.c:238:d0v0 mfn 0x39000 doesn't belong to d1
Error on alloc magic pages
```
The "magic page" is a terminology used in the toolstack as reserved
pages for the VM to have access to virtual platform capabilities.
Currently the magic pages for Dom0less DomUs are populated by the
init-dom0less app through populate_physmap(), and populate_physmap()
automatically assumes gfn == mfn for 1:1 direct mapped domains. This
cannot be true for the magic pages that are allocated later from the
init-dom0less application executed in Dom0. For domain using statically
allocated memory but not 1:1 direct-mapped, similar error "failed to
retrieve a reserved page" can be seen as the reserved memory list is
empty at that time.
Since for init-dom0less, the magic page region is only for XenStore.
To solve above issue, this commit allocates the XenStore page for
Dom0less DomUs at the domain construction time. The PFN will be
noted and communicated to the init-dom0less application executed
from Dom0. To keep the XenStore late init protocol, set the connection
status to XENSTORE_RECONNECT.
Currently the GUEST_MAGIC_BASE in the init-dom0less application is
hardcoded, which will lead to failures for 1:1 direct-mapped Dom0less
DomUs.
Since the guest magic region allocation from init-dom0less is for
XenStore, and the XenStore page is now allocated from the hypervisor,
instead of hardcoding the guest magic pages region, use
xc_hvm_param_get() to get the XenStore page PFN. Rename alloc_xs_page()
to get_xs_page() to reflect the changes.
With this change, some existing code is not needed anymore, including:
(1) The definition of the XenStore page offset.
(2) Call to xc_domain_setmaxmem() and xc_clear_domain_page() as we
don't need to set the max mem and clear the page anymore.
(3) Foreign mapping of the XenStore page, setting of XenStore interface
status and HVM_PARAM_STORE_PFN from init-dom0less, as they are set
by the hypervisor.
Take the opportunity to do some coding style improvements when possible.
Reported-by: Alec Kwapis <alec.kwapis@medtronic.com>
Suggested-by: Daniel P. Smith <dpsmith@apertussolutions.com>
Signed-off-by: Henry Wang <xin.wang2@amd.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com>
Reviewed-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Jason Andryuk <jason.andryuk@amd.com>
Acked-by: Anthony PERARD <anthony.perard@vates.tech>
When reinstating some of systemd.m4 between v1 and v2, I reintroduced a little
too much. While {c,o}xenstored are indeed no longer linked against
libsystemd, ./configure still looks for it.
Drop this too.
Fixes: ae26101f6b ("tools: Drop libsystemd as a dependency")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Enabling it using an HVM param is fragile, and complicates the logic when
deciding whether options that interact with altp2m can also be enabled.
Leave the HVM param value for consumption by the guest, but prevent it from
being set. Enabling is now done using and additional altp2m specific field in
xen_domctl_createdomain.
Note that albeit only currently implemented in x86, altp2m could be implemented
in other architectures, hence why the field is added to xen_domctl_createdomain
instead of xen_arch_domainconfig.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Christian Lindig <christian.lindig@cloud.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com> # hypervisor
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Juergen Gross <jgross@suse.com> # tools/libs/
Release-acked-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
With the XEN_DOMCTL_dt_overlay DOMCTL added, users should be able to
attach (in the future also detach) devices from the provided DT overlay
to domains. Support this by introducing a new "xl dt-overlay" command
and related documentation, i.e. "xl dt-overlay attach. Slightly rework
the command option parsing logic.
Signed-off-by: Henry Wang <xin.wang2@amd.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com>
Reviewed-by: Jason Andryuk <jason.andryuk@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Currently, the number of SPIs allocated to the domain is only
configurable for Dom0less DomUs. Xen domains are supposed to be
platform agnostics and therefore the numbers of SPIs for libxl
guests should not be based on the hardware.
Introduce a new xl config entry for Arm to provide a method for
user to decide the number of SPIs. This would help to avoid
bumping the `config->arch.nr_spis` in libxl everytime there is a
new platform with increased SPI numbers.
Update the doc and the golang bindings accordingly.
Signed-off-by: Henry Wang <xin.wang2@amd.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com>
Reviewed-by: Jason Andryuk <jason.andryuk@amd.com>
Fix the name mismatch in the xl dt-overlay command, the
command name should be "dt-overlay" instead of "dt_overlay".
Add the missing "," in the cmdtable.
Fix the exit code of the dt-overlay command, use EXIT_FAILURE
instead of ERROR_FAIL.
Fixes: 61765a07e3 ("tools/xl: Add new xl command overlay for device tree overlay support")
Suggested-by: Anthony PERARD <anthony@xenproject.org>
Signed-off-by: Henry Wang <xin.wang2@amd.com>
Reviewed-by: Jason Andryuk <jason.andryuk@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
To unify certain common sanity checks, checks are done very early in
processing based only on the top-level type.
Unfortunately, when TRC_HVM_EMUL was introduced, it broke some of the
assumptions about how the top-level types worked. Namely, traces of
this type will show up outside of HVM contexts: in idle domains and in
PV domains.
Make an explicit exception for TRC_HVM_EMUL types in a number of places:
- Pass the record info pointer to toplevel_assert_check, so that it
can exclude TRC_HVM_EMUL records from idle and vcpu data_mode
checks
- Don't attempt to set the vcpu data_type in hvm_process for
TRC_HVM_EMUL records.
Signed-off-by: George Dunlap <george.dunlap@cloud.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
A long-standing usability sub-optimality with xenalyze is the
necessity to specify `--svm-mode` when analyzing AMD processors. This
fundamentally comes about because the same trace event ID is used for
both VMX and SVM, but the contents of the trace must be interpreted
differently.
Instead, allocate separate trace events for VMX and SVM vmexits in
Xen; this will allow all readers to properly interpret the meaning of
the vmexit reason.
In xenalyze, first remove the redundant call to init_hvm_data();
there's no way to get to hvm_vmexit_process() without it being already
initialized by the set_vcpu_type call in hvm_process().
Replace this with set_hvm_exit_reson_data(), and move setting of
hvm->exit_reason_* into that function.
Modify hvm_process and hvm_vmexit_process to handle all four potential
values appropriately.
If SVM entries are encountered, set opt.svm_mode so that other
SVM-specific functionality is triggered.
Remove the `--svm-mode` command-line option, since it's now redundant.
Signed-off-by: George Dunlap <george.dunlap@cloud.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
xentrace_format was always of limited utility, since trace records
across pcpus were processed out of order; it was superseded by xenalyze
over a decade ago.
But for several releases, the `formats` file it has depended on for
proper operation has not even been included in `make install` (which
generally means it doesn't get picked up by distros either); yet
nobody has seemed to complain.
Simple remove xentrace_format, and point people to xenalyze instead.
NB that there is no man page for xenalyze, so the "see also" on the
xentrace man page is simply removed for now.
Signed-off-by: George Dunlap <george.dunlap@cloud.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Olaf Hering <olaf@aepfle.de>
There are no more users, and we want to disuade people from introducing new
users just for sd_notify() and friends. Drop the dependency.
We still want the overall --with{,out}-systemd to gate the generation of the
service/unit/mount/etc files.
Rerun autogen.sh, and mark the dependency as removed in the build containers.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Christian Lindig <christian.lindig@cloud.com>
... in order to avoid linking against the whole of libsystemd.
Only minimal changes to the upstream copy, to function as a drop-in
replacement for sd_notify() and as a header-only library.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Christian Lindig <christian.lindig@cloud.com>
Jan Beulich