CPUs coming online sync themselves with current MTRR state at an
appropriate point anyway.
It's not actually possible to have a newly booted CPU immediately have
in-sync MTRR state anyway. It has to be synced up as part of normal
CPU bootstrap procedure. Which is what we do.
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
libxl_domid_to_name() have already been called in
save_domain_core_begin()->find_domain(), so remove it.
Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
This patch makes xc_linux properly deal with:
1. discovering and creating device nodes if necessary
2. the new form of xen/<dev> device names soon to be used by the
kernel
This changes the logic slightly:
- If a device node already exists with the proper name, then it uses
it as-is, assuming it has already been correctly created.
- If the path doesn't exist, or it exists but isn't a device node,
and
it has successfully found the major/minor for the device, then
(re)create the device node.
Since this logic is identical for gntdev and evtchn, make a common
function to handle both.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
The current implementation of update_runstate_area is unable to handle
32 bit PV on HVM guests because the check is_pv_32on64_domain doesn't
cover that case. This patch fixes it.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
* Provide a new XTL_STDIOSTREAM_HIDE_PROGRESS flag in the stdio logger
* Provide a way to adjust the flags after logger setup
* Use these to disable progress output from the migration receiver, as
the sender is also sending progress information.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Previously, the code was inconsistent: some calls to PERROR passed \n
and some did not. With the new logging arrangements, passing \n is
definitely incorrect.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
* Make "read_exact" in libxc always set errno.
* Rename "read_exact" macro in xc_domain_restore.c (which shadows
real function) to RDEXACT and change all callers.
* Make RDEXACT anamorphically use xch for error reporting rather than
* stderr.
* Call PERROR rather than ERROR when appropriate, so that log messages
include errno.
* Save errno in noncached_write so that its errno value is always
* right.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
The -v option, which must come before the xl command, increases the
logging level each time it is supplied.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
We now require callers to provide a xentoollog_logger* for
libxl_ctx_init, and use that for all our own logging and also for
xc_interface_open.
Corresponding change to xl.c.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
oubuf and batch restore write messages should be sent with level
XTL_DEBUG so that they don't disturb progress output even with -v.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
This patch eliminate the global variables in libxenctrl (used for
logging and error reporting).
Instead the information which was in the global variables is now in a
new xc_interface* opaque structure, which xc_interface open returns
instead of the raw file descriptor; furthermore, logging is done via
xentoollog.
There are three new parameters to xc_interface_open to control the
logging, but existing callers can just pass "0" for all three to get
the old behaviour.
All libxc callers have been adjusted accordingly.
Also update QEMU_TAG for corresponding qemu change.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
We provide a new header file "xentoollog.h" which defines an interface
that libraries and applications can use for logging. This avoids
having to wrap each library's log callbacks up, massage arguments to
log callbacks, and so on.
The library's .o files are within libxc to avoid having to create a
separate lib*.a, but callers do not need to #include xenctrl.h and it
should be regarded as a separate API.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
libelf now permits callers to specify logging callback functions,
rather than a FILE*. libelf's non-Xen callers are all libxc users, so
the stdio dependency and the default logging callback function (which
calls vfprintf) is now in libxc.
Xen's use of libxc is unaffected in this patch.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
There is already a "write_exact" function declared in xc_private.h.
So rename this macro to to wrexact.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Newlib unaccountably defines _daylight, _timezone and _tzname, rather
than daylight, timezone and tzname. The latter are specified in
SuSv3.
So do a global search and replace as part of our newlib patching :-(.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
While setting the HAP entry previously, we only check the hardware
capability for 1GB super page. This patch adds hardware capability
check for 2MB superpage
Also, Intel SDM doesn't exclude 1GB feature for 32/pae
host. Therefore remove the BUG_ON() check in common code.
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
When parsing BDFs for pci-attach/detach, check the return of scanf
rather than operating on random devices.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
The parsing of PCI resources has two problems:
1. it assumes devices are 32-bits, whereas the fields in the
"resources" file can have full 64-bit values
2. it only parses the first resource because the format string is
missing a \n
Fix both of these up, which allows my Intel 82574L to work with MSI-X.
However, this should probably be using a PCI access library rather
than rummaging around in /sys/bus/pci...
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
The current version of superpage mapping takes a PGT_writable
reference to every page in a superpage each time it is mapped. This
is extremely slow, so slow that applications become unusable.
My solution for this is to introduce a superpage table in the
hypervisor, similar to the frametable structure for pages. Currently
this table only has a type_info element. There are three types a
superpage can have, SGT_mark, SGT_dynamic, or SGT_none.
In normal operation, the first time a superpage is mapped, a
PGT_writable reference is taken to each page in the superpage, and the
superpage is set to type SGT_dynamic and the superpage typecount is
incremented. On subsequent mappings and unmappings, only the
superpage typecount changes. On the last unmap, the PGT_writable
reference on each page is removed.
The SGT_mark type is set and cleared through two new MMUEXT
hypercalls, mark_super and unmark_super. When the hypercall is made,
the superpage's type is set to SGT_mark and a PGT_writable reference
is taken to its pages. On unmark, the type is cleared and the
reference removed.
If a page is already set to SGT_dynamic when mark_super is called, the
type is changed to SGT_mark and no additional PGT_writable reference
is taken. If there are still outstanding mappings of this superpage
when unmark_super is called, the type is set to SGT_dynamic and the
PGT_writable reference is not removed.
Fast superpage mapping is only supported on 64 bit hypervisors. For
32 bit hyperviors, superpage mapping is supported but will be
extremely slow.
Signed-off-by: Dave McCracken <dave.mccracken@oracle.com>
Discard guest console data in bigger chunks so that there are fewer
discontinuities in the console data. Also avoid discarding data if
space is available at the front of the buffer by reclaiming that
space.
Patch from: Christian Limpach <Christian.Limpach@citrix.com>
Signed-off-by: Tim Deegan <Tim.Deegan@citrix.com>
Use the proper bootloader class when entering the boot commands
manually (i.e. using the 'c' option). Before this patch the bootloader
was always treated to be Grub but when user is using Grub2/ExtLinux or
Lilo it's rather confusing. After applying this patch the proper
bootloader image class is being used, e.g. Grub2Image for Grub2
etc. when you define the boot commands manually using the 'c' command
in pyGrub.
Also, fix for using isconfig has been applied since if there is not fs
set in the run_grub() method the read_config() would fail since it's
trying to access undefined self.cf which is now being set to parser()
from cfg_list.
Signed-off-by: Michal Novotny <minovotn@redhat.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
localtime can be stored in vm config as a string, resulting in
incorrect calculation of rtc_timeoffset. Cast localtime to int
to ensure rtc_timeoffset is calculated properly.
Signed-off-by: Jim Fehlig <jfehlig@novell.com>
c/s 20393 breaks existing domain configuration that contains
spaces in the vbd path name. Fixed by this trivial patch which
provides missing quotes.
Signed-off-by: Jim Fehlig <jfehlig@novell.com>
- When use mem-set, I got suspicious error output:
# xl mem-set 1 256g
setting domid 1 memory to : 268435456
[0] libxl.c:2535:libxl_set_memory_target: memory_dynamic_max must be
less than or equal to memory_static_max
: Success
- String generated by strdup() should be freed
- When using 'xl help', mem-max and mem-set's output is not as intend,
and it also breaks bash completion, fix it.
Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
At present, find_domain() will exit(2) if you specify a domain by
number, but that domain doesn't have a corresponding name. However,
nothing seem to critically depend on common_domname being set, and the
test prevents dom0 or other nameless domains from being named. So
just remove the check.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Acked-by: Yang Hongyang <yanghy@cn.fujitsu.com>
If dom0 alters the p2m of a domain that's being destroyed, we can end
up doing a remove-all-shadows after the shadow hash table has been
freed. Since no hash table implies no shadows, just return
immediately.
Signed-off-by: Tim Deegan <Tim.Deegan@citrix.com>
When a VM's wallclock offset is negative enough, gmtime() can be called
with an underflowed uint64, which it then tries to divide into years
by subtraction. Handle the input as a 40-bit signed integer instead.
Signed-off-by: Tim Deegan <Tim.Deegan@citrix.com>
Keir Fraser