Add some documentation for each of the p2m_mem_paging functions to describe
what they ought to do.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Tim Deegan <tim@xen.org>
Committed-by: Tim Deegan <tim@xen.org>
Add checks to forward the p2m_ram_paging* state properly during page-in.
Resume can be called several times if several vcpus called populate for
the gfn. Finish resume only once.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Tim Deegan <tim@xen.org>
Committed-by: Tim Deegan <tim@xen.org>
While doing so, eliminate the use of struct irq_cfg and convert the
CPU mask accessors to the new style ones as far as possible.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
struct irq_cfg really has become an architecture extension to struct
irq_desc, and hence it should be treated as such (rather than as IRQ
chip specific data, which it was meant to be originally).
For a first step, only convert a subset of the uses; subsequent
patches (partly to be sent later) will aim at fully eliminating the
use of the old structure type.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
If the serial device is not "pty" then there is nothing to do but this is not
an error. Removes a spurious warning if e.g. serial="file:/tmp/serial.log" is used:
libxl: error: libxl_qmp.c:137:register_serials_chardev_callback: Failed to store serial port information in xenstore: No such file or directory
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson.citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Backends were inconsistent about reporting and it's a pain to edit them all
when adding a new class of osdep.
Signed-off-by: Ian Campbell <Ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson.citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
---
Requires Daniel De Graaf's "libxc: add xc_gntshr_* functions"
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson.citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
currently it return success no matter what.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson.citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Without this "xl block-attach" does not work. On create do_domain_create already
catches this.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson.citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson.citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson.citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
I can't run from the current directory since my build box isn't running Xen so
if ./xl doesn't exist use the installed version on the assumption that I've
copied the script to a test host.
I think running from the build dir needs the blktap2 libraries, so update
LD_LIBRARY_PATH as appropriate.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson.citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Two functions are provided. TYPE_gen_json exposes an interface which is
compatible with the YAGL generator infrastructure. TYPE_to_string uses this to
produce a pretty printed string.
The TYPE_gen_json functions are defined in a new header libxl_json.h which is
not exposed via libxl.h due to the use of YAGL datatypes to avoid poluting the
namespace us libxl users which don't use the library themselves. If a libxl
user is interested in integrating at the YAGL level then it should #include
this file itself.
Also update testidl to generate a random version of each IDL datastructure and
convert it to JSON. Unfortunately this requires a libxl_ctx and therefore the
test must be run on a Xen system now.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson.citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
... to be more in-line with the NR_DOMAIN_WATCHDOG_TIMERS check at the
top of domain_watchdog(), and also to follow the
timer_(delete|settime)
POSIX API's EINVAL return value.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Also, replace EEXIST with ENOSPC when failing to allocate a new
domain watchdog.
Signed-off-by: Keir Fraser <keir@xen.org>
Committed-by: Keir Fraser <keir@xen.org>
The function gets called only during initialization/resume (when no
other CPUs are running) or with the IRQ descriptor lock held, so
there's no way for the CPU mask to change under its feet.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Keir Fraser <keir@xen.org>
This eliminates passing and returning by value of this type (making it
unnecessary for the compiler to create temporary variables for doing so
on the stack), thus dramatically reducing the stack frame sizes of a
couple of functions (was in one case over 12k for a 4095-CPU build).
In one case a local variable gets converted to a static one, possible
because the function gets called at most once (during early boot).
Some accessors get eliminated altogether as being unused or as being
equally well open coded at the place of use.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Keir Fraser <keir@xen.org>
No consumer of RCU should need to see these, and there's also no need
to clutter the global name space with them.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Keir Fraser <keir@xen.org>
This fixes an actual bug (failure to exit from a function after an
allocation failure), an inconsistency (not removing the cpufreq_dom
list member upon failure), and a latent bug (not clearing the current
governor upon governor initialization failure when there was no old
one; latent because the only current code path leading to this
situation frees the policy upon failure and hence the governor not
getting cleared is benign).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Keir Fraser <keir@xen.org>
possible.
We still need one ifdef, as x86-32 does not have a compat_gdt_table.
On x86-32 there is 1/2-page wastage due to allocating a whole page for
the per-CPU IDT, however we expect very few users of the x86-32
hypervisor. Those that cannot move to the 64-bit hypervisor are likely
using old single-processor systems or new single-procesor netbooks. On
UP and small MP systems, the wastage is insignificant.
Signed-off-by: Keir Fraser <keir@xen.org>
Committed-by: Keir Fraser <keir@xen.org>
Accessing HSAVE_PA MSR does not require SVM to be enabled nor any
special guest paging mode.
But accessing HSAVE_PA MSR requires the address to be 4k aligned.
Signed-off-by: Christoph Egger <Christoph.Egger@amd.com>
Acked-by: Tim Deegan <tim@xen.org>
Committed-by: Tim Deegan <tim@xen.org>
Evict of a nominated gfn must fail if some other process mapped the
page without checking the p2mt of that gfn first.
Add a check to cancel eviction if the page usage count is not 1.
Handle the possible eviction failure in the page-in paths.
After nominate and before evict, something may check the p2mt and call
populate. Handle this case and let the gfn enter the page-in path. The
gfn may still be connected to a mfn, so there is no need to allocate a
new page in prep.
Adjust do_mmu_update to return -ENOENT only if the gfn has entered the
page-in path and if it is not yet connected to a mfn. Otherwise
linux_privcmd_map_foreign_bulk() may loop forever.
Add MEM_EVENT_FLAG_EVICT_FAIL to inform pager that a page-in request for
a possible not-evicted page was sent. xenpaging does currently not need
that flag because failure to evict a gfn will be caught.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Tim Deegan <tim@xen.org>
Committed-by: Tim Deegan <tim@xen.org>
There are still a couple of family 6 models missing here: 37, 44, 46,
and 47 (according to SDM doc changes May 2011); presumably they would
all go into the Nehalem/Sandy Bridge group. Intel?
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Haitao Shan <maillists.shan@gmail.com>
Certain (boot time) allocations are relatively large (particularly when
building with high NR_CPUS), but can also happen to be pretty far away
from a power-of-two size. Utilize the page allocator's (other than
Linux'es) capability of allowing to return space from higher-order
allocations in smaller pieces to return the unused parts immediately.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Keir Fraser <keir@xen.org>
The IDTs being exactly a page in size, using xmalloc() here is rather
inefficient, as this requires double the amount to be allocated (with
almost an entire page wasted). For hot plugged CPUs, this at once
eliminates one more non-order-zero runtime allocation.
For x86-32, however, the IDT is exactly half a page, so allocating a
full page seems wasteful here, so it continues to use xmalloc() as
before.
With most of the affected functions' bodies now being inside #ifdef-s,
it might be reasonable to split those parts out into subarch-specific
code...
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Keir Fraser <keir@xen.org>
None of the callers actually make use of the function's returning of
the old affinity through its second parameter, and eliminating this
capability allows some callers to no longer use a local variable here,
reducing their stack footprint significantly when building with large
NR_CPUS.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Keir Fraser <keir@xen.org>
The change to poll LSR.THRE in a loop from __ns16550_poll is a bug.
We can loop indefinitely if there are no chars to transmit.
Thanks to Jan for spotting it.
Signed-off-by: Keir Fraser <keir@xen.org>
I ran the following and committed the result. ^I is an actual hard tab
for i in $(grep -l --exclude=*_[ly].\[ch\] '^I' tools/libxl/*.[ch]) ; do
cat $i | expand | sponge $i
done
There are some actually wrong indentations too, I'll fix those up
manually.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Debugging config file errors is tedious so help a bit by not silently
dropping parsing exceptions when --debug is given. Also intialize the
logging API at debug level in this case.
Signed-off-by: Guido Gunther <agx@sigxcpu.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
If the guest happens to read from the gfn while xenpaging is in the process of
evicting the page, the guest may read zeros instead of actual data.
Also if eviction fails the page content will be corrupted and xenpaging wont
attempt to restore the page.
Remove page scrubbing from pager and do it after successful eviction.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Tim Deegan <tim@xen.org>
Committed-by: Tim Deegan <tim@xen.org>
Add a new field 'max_nr_cpus' to the physinfo type in the ocaml xc bindings
Signed-off-by: Zheng Li <zheng.li@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
The bit bugs are in ocaml vcpu affinity calls, and the off-by-one
error is in the ocaml console ring code
Signed-off-by: Zheng Li <zheng.li@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Acked-by: Jon Ludlam <jonathan.ludlam@eu.citrix.com>
The only user was oxenstored, which has had the relevant bits
merged in.
Signed-off-by: Zheng Li <zheng.li@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Acked-by: Jon Ludlam <jonathan.ludlam@eu.citrix.com>
The library was only minimally used, and was really rather redundant.
Signed-off-by: Zheng Li <zheng.li@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Acked-by: Jon Ludlam <jonathan.ludlam@eu.citrix.com>
ocamlfind does not support namespaces, so to avoid
name clashes the module names have become longer.
Additionally, the xenstore and xenbus subdirs, which
contain several modules each, have been packed into
toplevel Xenstore and Xenbus modules.
xb becomes xenbus, xc becomes xenctrl, xl becomes xenlight,
xs becomes xenstore, eventchn becomes xeneventchn and
mmap becomes xenmmap.
[ Patch modified from that submitted, to update the .hgignore, and to
cope with intervening changes to mmap_stubs.c -iwj ]
Signed-off-by: Jon Ludlam <jonathan.ludlam@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
AMD_ERRATUM_400 was used to determine whether the processor supports
Always Running APIC Counter (ARAT) feature in init_amd(). Now that
ARAT support is based solely on family number this macro is no longer
needed.
Keep it in comments section as an example in case we ever need to use
it for somethnig else.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@amd.com>
Committed-by: Jan Beulich <jbeulich@suse.com>
This deals with two limitations at once: On device removal, the
mapping did not get updated so far at all, and hotplugged devices as
well as such not discoverable by Xen's initial bus scan (including the
case where a non-zero PCI segment wasn't accessible during Xen boot,
but became accessible after Dom0 validated access information against
ACPI data) wouldn't cause updates to the mapping either.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: "Kay, Allen M" <allen.m.kay@intel.com>
If a non-zero PCI segment isn't accessible during Xen boot (because
firmware decided to not enter the necessary MMIO space into the E820
table), devices referred to on those segments through DRHD or RMRR
structures should not be rejected just because the devices can't be
found.
This is in line with what is being done in at least one other case
already: Systems with more than one PCI segment (usually high end
ones) are assumed to have valid firmware provided data, while systems
with just segment 0 continue to have their firmware tables validated.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: "Kay, Allen M" <allen.m.kay@intel.com>
Remove tools/check/check_logging. Python 2.3 is the minimal required
python version so the checked function is available anyway.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Olaf Hering
Jan Beulich
Ian Campbell
Andrew Cooper
Keir Fraser
Shan Haitao
Christoph Egger
Guido Gunther
Jon Ludlam
Daniel De Graaf
Boris Ostrovsky