Allow the path to be set from a configure command line option.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
[ wei: run autogen.sh ]
Add a short entry to the xl.cfg man page about pvcalls.
Also add LIBXL_HAVE_PVCALLS to mark the presence of pvcalls support in
libxl.
Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Add pvcalls support to libxl and xl. Create the appropriate pvcalls
entries in xenstore.
Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Make it possible to get and set a (Credit1) scheduler's
vCPU migration delay via the SCHEDOP sysctl, from both
libxl and xl (no change needed in libxc).
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
The man for xl.cfg have the "devtype=hostdev" option, but xl only
understand "type=hostdev", fix the manual to reflect actual
implementation.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
XSA-256 forces the local APIC to always be enabled for PVH guests, so
ignore any apic option for PVH guests. Update the documentation
accordingly.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
All this information is now covered in SUPPORT.md.
Most of the emulated hardware is obvious a couple of the items are
worth pointing out specifically.
"xen_disk" is listed under "Blkback"
"...the PCI host bridge and the PIIX3 chipset...": This statement is
redundant -- the PCI host bridge is a part of the piix3 chipset, which
is listed as supported.
xenfb: The "graphics" side of "xenfb" is listed under "PV Framebuffer
(backend)", and the "input" side of "xenfb" (including both keyboard
and mouse) is listed under "PV Keyboard (backend)".
Backing storage image format is listed in the "Blkback" section.
Fix 'stdvga' spelling while we're here.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Xen does not properly support big.LITTLE platform. All vCPUs of a guest
will always have the MIDR of the boot CPU (see arch_domain_create).
At best the guest may see unreliable performance (vCPU switching between
big and LITTLE), at worst the guest will become unreliable or insecure.
This is becoming more apparent with branch predictor hardening in Linux
because they target a specific kind of CPUs and may not work on other
CPUs.
For the time being, park any CPUs with a MDIR different from the boot
CPU. This will be revisited in the future once Xen gains understanding
of big.LITTLE.
[1] https://lists.xenproject.org/archives/html/xen-devel/2016-12/msg00826.html
Signed-off-by: Julien Grall <julien.grall@arm.com>
Reviewed-by: Oleksandr Tyshchenkko <oleksandr_tyshchenko@epam.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Jan Beulich <jbeulich@suse.com>
This patch was originally released as part of XSA-226. It retains the same
command line syntax (as various downstreams are mitigating XSA-226 using this
mechanism) but the defaults have been updated due to the revised XSA-226
patched, after which transitive grants are believed to functioning
properly.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
The current XPTI implementation isolates the directmap (and therefore a lot of
guest data), but a large quantity of CPU0's state (including its stack)
remains visible.
Furthermore, an attacker able to read .text is in a vastly superior position
to normal when it comes to fingerprinting Xen for known vulnerabilities, or
scanning for ROP/Spectre gadgets.
Collect together the entrypoints in .text.entry (currently 3x4k frames, but
can almost certainly be slimmed down), and create a common mapping which is
inserted into each per-cpu shadow. The stubs are also inserted into this
mapping by pointing at the in-use L2. This allows stubs allocated later (SMP
boot, or CPU hotplug) to work without further changes to the common mappings.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
So it can be used by both gcc and clang. Just add the Kconfig option
and modify the makefiles so the llvm coverage specific code can be
added in a follow up patch.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
[jb: also change the shim config]
The previous version simply states that a symlink has to be created
without telling where the symlink should point to.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Wei Liu <wei.liu2@citrix.com>
HVC is shown underlined, the underscores are missing.
Fix it by using underscores.
Remove stale I.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Support both a "disable everything" and a "disable all RSB overwriting"
sub-option.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Issuing an IBPB command flushes the Branch Target Buffer, so that any poison
left by one vcpu won't remain when beginning to execute the next.
The cost of IBPB is substantial, and skipped on transition to idle, as Xen's
idle code is robust already. All transitions into vcpu context are fully
serialising in practice (and under consideration for being retroactively
declared architecturally serialising), so a cunning attacker cannot use SP1 to
try and skip the flush.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
See the logic and comments in init_speculation_mitigations() for further
details.
There are two controls for RSB overwriting, because in principle there are
cases where it might be safe to forego rsb_native (Off the top of my head,
SMEP active, no 32bit PV guests at all, no use of vmevent/paging subsystems
for HVM guests, but I make no guarantees that this list of restrictions is
exhaustive).
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Remove sched=null from shim cmdline and doc
We use the default scheduler (credit1 as of writing). The NULL
scheduler still has bugs to fix.
Update shim.config.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
There was no default documented but inspecting
libxl__domain_build_info_setdefault() shows the default to be
LIBXL_TIMER_MODE_NO_DELAY_FOR_MISSED_TICKS.
Signed-off-by: Doug Goldstein <cardoe@cardoe.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
shim_mem will now account for both the memory used by the hypervisor
loaded in memory and the free memory slack given to the shim for
runtime usage.
From experimental testing it seems like the total amount of MiB used
by the shim (giving it ~1MB of free memory for runtime) is:
memory/113 + 20
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Instead of gaining yet another top level boolean, introduce a more generic
cpuid= option. Also introduce a helper function to parse a generic boolean
value.
This is part of XSA-254.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Depending on hardware and microcode availability, we will want to replace
IND_THUNK_REPOLINE with other implementations.
For AMD hardware, choose IND_THUNK_LFENCE in preference to retpoline if lfence
is known to be (or was successfully made) dispatch serialising.
This is part of XSA-254.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
First of all we don't need it on AMD systems. Additionally allow its use
to be controlled by command line option. For best backportability, this
intentionally doesn't use alternative instruction patching to achieve
the intended effect - while we likely want it, this will be later
follow-up.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
This patch creates MBA feature document in doc/features/. It describes
key points to implement MBA which is described in details in Intel SDM
"Introduction to Memory Bandwidth Allocation".
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Allowing pagetables to point to other pagetables of the same level
(often called 'linear pagetables') has been included in Xen since its
inception; but recently it has been the source of a number of subtle
reference-counting bugs.
It is not used by Linux or MiniOS; but it is used by NetBSD and Novell
Netware. There are significant numbers of people who are never going
to use the feature, along with significant numbers who need the
feature.
Add a Kconfig option for the feature (default to 'y'). Also add a
command-line option to control whether PV linear pagetables are
allowed (default to 'true').
NB that we leave linear_pt_count in the page struct. It's in a union,
so its presence doesn't increase the size of the data struct.
Changing the layout of the other elements based on configuration
options is asking for trouble however; so we'll just leave it there
and ASSERT that it's zero.
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Release-acked-by: Julien Grall <julien.grall@arm.com>
Right now, this is broken because libxl__build_device_model_args_new
is used also for the qemu run for pv guests for qdisk devices, pvfb,
etc.
We can either make this option properly HVM-specific, or make it
generic.
In principle it is a reasonable request, to make the PV qemu
deprivileged (even though it is not likely to be implemented any time
soon). So make this option generic.
We retain the name "device model" even though it is arguably
inaccurate, because the xl docs already say, for example
For a PV guest a device-model is sometimes used to provide backends
for certain PV devices
The documentation patch here is pure code motion. For ease of review
we will fix up the docs, so the wording to be right for the new
context, in the next patch.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Reported-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
---
v2: Change xl too, to avoid breaking the build.
Fix manpage pod syntax.
Ross reports that stdvga guests do not work, and cirrus guests are
slow, because qemu tries to do xc_domain_add_to_physmap. We will need
another dmop to fix this properly.
For now, document the problem.
(In the cirrus case, the vram remains mapped at the old guest-physical
addresses, while the guest runs. We are not sure whether this is a
correctness or security problem and we should advise against it.)
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Reported-by: Ross Lagerwall <ross.lagerwall@citrix.com>
CC: Ross Lagerwall <ross.lagerwall@citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
CC: Paul Durrant <Paul.Durrant@citrix.com>
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
If the config specifies a user we use that. Otherwise:
When we are not restricting qemu, there is very little point running
it as a different user than root. Indeed, previously, creating the
"magic" users would cause qemu to become slightly dysfunctional (for
example, you can't insert a cd that the qemu user can't read).
So, in that case, default to running it as root.
Conversely, if restriction is requested, we must insist on running
qemu as a non-root user.
Sadly the admin is still required to create 2^16-epsilon users!
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
This functionality is still quite imperfect, but it will be useful in
certain restricted use cases.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
This is in line with the previous behavior, setting the number of
maptrack frames to 0 will prevent driver domains from working
correctly.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Make it possible for the user to specify, with the boot
time parameter rcu-idle-timer-period-ms, how frequently
a CPU that went idle with pending RCU callbacks should be
woken up to check if the grace period ended.
Typical values (i.e., some of the values used by Linux as
the tick frequency) are 10, 4 or 1 ms. Default valus (used
when this parameter is not specified) is 10ms. Maximum is
100ms.
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Roger Pau Monne