Make the locking functions return the lock pointers, so they can be
passed to the unlocking functions (which in turn can check that the
lock is still actually providing the intended protection, i.e. the
parameters determining which lock is the right one didn't change).
Further use proper spin lock primitives rather than open coded
local_irq_...() constructs, so that interrupts can be re-enabled as
appropriate while spinning.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Keir Fraser <keir@xen.org>
master commit: eedd603916
master date: 2013-10-14 08:57:56 +0200
Coverity ID 1087189
Correct a lock order reversal between a domains page allocation and grant
table locks.
This is CVE-2013-4494 / XSA-73.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Consolidate error handling.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Keir Fraser <keir@xen.org>
Tested-by: Matthew Daley <mattjd@gmail.com>
master commit: a321abc6d8
master date: 2013-11-04 10:06:36 +0100
This fixes the issue for both C and ocaml xenstored, however only the ocaml
xenstored is vulnerable in its default configuration.
Adding a new error appears to be safe, since bit libxenstore and the Linux
driver at least treat an unknown error code as EINVAL.
This is XSA-72 / CVE-2013-4416.
Original ocaml patch by Jerome Maloberti <jerome.maloberti@citrix.com>
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Thomas Sanders <thomas.sanders@citrix.com>
(cherry picked from commit 8b2c441a1b)
When the permission checks for memory mapping were moved from
get_pg_owner to xsm_mmu_update in aaba7a677, the exception for DOMID_IO
was not taken into account. This will cause IO memory mappings by PV
domains (mini-os in particular) to fail when XSM/FLASK is not being
used. This patch reintroduces the exception for DOMID_IO; the actual
restrictions on IO memory mappings have always been checked separately
using iomem_access_permitted, so this change should not break existing
access control.
Reported-by: Eduardo Peixoto Macedo <epm@cin.ufpe.br>
Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
master commit: 07344c0f33
master date: 2013-09-26 10:15:47 +0200
... as there doesn't really exists any valid mapping for them.
Particularly in the case of do_page_walk() this also avoids returning
non-NULL for such invalid input.
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Keir Fraser <keir@xen.org>
master commit: 6fd9b0361e
master date: 2013-10-11 09:31:16 +0200
Just like for guest_get_eff_l1e() this prevents accessing as page
tables (and with the wrong memory attribute) internal data inside Xen
happening to be mapped with 1Gb pages.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper@citrix.com>
Acked-by: Keir Fraser <keir@xen.org>
master commit: d06a0d715e
master date: 2013-10-11 09:29:43 +0200
- MMUEXT_SET_LDT should behave as similarly to the LLDT instruction as
possible: fail only if the base address is non-canonical
- instead LDT descriptor accesses should fault if the descriptor
address ends up being non-canonical (by ensuring this we at once
avoid reading an entry from the mach-to-phys table and consider it a
page table entry)
- fault propagation on using LDT selectors must distinguish #PF and #GP
(the latter must be raised for a non-canonical descriptor address,
which also applies to several other uses of propagate_page_fault(),
and hence the problem is being fixed there)
- map_ldt_shadow_page() should properly wrap addresses for 32-bit VMs
At once remove the odd invokation of map_ldt_shadow_page() from the
MMUEXT_SET_LDT handler: There's nothing really telling us that the
first LDT page is going to be preferred over others.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Keir Fraser <keir@xen.org>
master commit: 40d66baa46
master date: 2013-10-11 09:28:26 +0200
since it errors out, asking for at least one argument, and does
not display any useful output, which is wrong (we want the list
and the info about all the existing cpupools).
IOW, the output is as follows:
~# xl cpupool-list -c
'xl cpupool-list' requires at least 1 argument.
...
While it should be as follows:
~# xl cpupool-list -c
Name CPU list
Pool-0 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: Juergen Gross <juergen.gross@ts.fujitsu.com>
(cherry picked from commit 3998afdbf9)
...otherwise it will return freed memory. All the current users of this
function check already for a NULL return, so use that.
Coverity-ID: 1056194
This is CVE-2013-4371 / XSA-70
Signed-off-by: Matthew Daley <mattjd@gmail.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
(cherry picked from commit 4c37ed5622)
Not sure how it got there...
Coverity-ID: 1056196
This is CVE-2013-4370 / XSA-69
Signed-off-by: Matthew Daley <mattjd@gmail.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
(cherry picked from commit 3cd10fd212)
strtok can return NULL here. We don't need to use strtok anyway, so just
use a simple strchr method.
Coverity-ID: 1055642
This is CVE-2013-4369 / XSA-68
Signed-off-by: Matthew Daley <mattjd@gmail.com>
Fix type. Add test case
Signed-off-by: Ian Campbell <Ian.campbell@citrix.com>
(cherry picked from commit c53702cee1)
When emulating such an operation from a 64-bit context (CS has long
mode set), and the data segment is overridden to FS/GS, the result of
reading the overridden segment's descriptor (read_descriptor) is not
checked. If it fails, data_base is left uninitialized.
This can lead to 8 bytes of Xen's stack being leaked to the guest
(implicitly, i.e. via the address given in a #PF).
Coverity-ID: 1055116
This is CVE-2013-4368 / XSA-67.
Signed-off-by: Matthew Daley <mattjd@gmail.com>
Fix formatting.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
master commit: 0771faba16
master date: 2013-10-10 15:19:53 +0200
The CONSOLEIO_read operation was incorrectly allowed to PV guests if the
hypervisor was compiled in debug mode (with VERBOSE defined).
Reported-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
master commit: 65ba631bcb
master date: 2013-10-04 12:51:44 +0200
Currently, it use hardcode value for IA32_VMX_CR4_FIXED1. This is wrong.
We should check guest's cpuid to know which bits are writeable in CR4 by guest
and allow the guest to set the corresponding bit only when guest has the feature.
Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com>
Cleanup.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Jun Nakajima <jun.nakajima@intel.com>
master commit: c6f92aed0e
master date: 2013-10-04 12:30:09 +0200
VMX MSRs only available when the CPU support the VMX feature. In addition,
VMX_TRUE* MSRs only available when bit 55 of VMX_BASIC MSR is set.
Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com>
Cleanup.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Jun Nakajima <jun.nakajima@intel.com>
master commit: 190b667ac2
master date: 2013-10-04 12:28:14 +0200
This causes accidental uses of per_cpu() on a pcpu with an INVALID_PERCPU_AREA
to result in a #GF for attempting to access the middle of the non-canonical
virtual address region.
This is preferable to the current behaviour, where incorrect use of per_cpu()
will result in an effective NULL structure dereference which has security
implication in the context of PV guests.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Keir Fraser <keir@xen.org>
master commit: 7cfb005362
master date: 2013-10-04 12:24:34 +0200
Checking for "idle_vcpu[cpu] != NULL" is insufficient protection against
offline pcpus. From a hypercall, vcpu_runstate_get() will determine "v !=
current", and try to take the vcpu_schedule_lock(). This will try to look up
per_cpu(schedule_data, v->processor) and promptly suffer a NULL structure
deference as v->processors' __per_cpu_offset is INVALID_PERCPU_AREA.
One example might look like this:
...
Xen call trace:
[<ffff82c4c0126ddb>] vcpu_runstate_get+0x50/0x113
[<ffff82c4c0126ec6>] get_cpu_idle_time+0x28/0x2e
[<ffff82c4c012b5cb>] do_sysctl+0x3db/0xeb8
[<ffff82c4c023280d>] compat_hypercall+0xbd/0x116
Pagetable walk from 0000000000000040:
L4[0x000] = 0000000186df8027 0000000000028207
L3[0x000] = 0000000188e36027 00000000000261c9
L2[0x000] = 0000000000000000 ffffffffffffffff
****************************************
Panic on CPU 11:
...
get_cpu_idle_time() has been updated to correctly deal with offline pcpus
itself by returning 0, in the same way as it would if it was missing the
idle_vcpu[] pointer.
In doing so, XENPF_getidletime needed updating to correctly retain its
described behaviour of clearing bits in the cpumap for offline pcpus.
As this crash can only be triggered with toolstack hypercalls, it is not a
security issue and just a simple bug.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Keir Fraser <keir@xen.org>
master commit: 0aa27ce335
master date: 2013-10-04 12:23:23 +0200
Now that the direct map area can extend all the way up to almost the
end of address space, this is wasteful.
Also fold two almost redundant messages in SRAT parsing into one.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Tested-by: Malcolm Crossley <malcolm.crossley@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Keir Fraser <keir@xen.org>
master commit: ca145fe70b
master date: 2013-09-30 15:28:12 +0200
Shadowed PV L4 tables must have the same Xen mappings as their
unshadowed equivalent. This is done by copying the Xen entries
verbatim from the idle pagetable, and then using guest_l4_slot()
in the SHADOW_FOREACH_L4E() iterator to avoid touching those entries.
adc5afbf1c (x86: support up to 16Tb)
changed the definition of ROOT_PAGETABLE_XEN_SLOTS to extend right to
the top of the address space, which causes the shadow code to
copy Xen mappings into guest-kernel-address slots too.
In the common case, all those slots are zero in the idle pagetable,
and no harm is done. But if any slot above #271 is non-zero, Xen will
crash when that slot is later cleared (it attempts to drop
shadow-pagetable refcounts on its own L4 pagetables).
Fix by using the new ROOT_PAGETABLE_PV_XEN_SLOTS when appropriate.
Monitor pagetables need the full Xen mappings, so they keep using the
old name (with its new semantics).
This is CVE-2013-4356 / XSA-64.
Signed-off-by: Tim Deegan <tim@xen.org>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
master commit: f46befdd82
master date: 2013-09-30 14:18:25 +0200
Ignoring them generally implies using uninitialized data and, in all
but two of the cases dealt with here, potentially leaking hypervisor
stack contents to guests.
This is CVE-2013-4355 / XSA-63.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Tim Deegan <tim@xen.org>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
master commit: 6bb838e737
master date: 2013-09-30 14:17:46 +0200
We shouldn't do any acceleration for
- "rep movs" when either side is passed through MMIO or when both sides
are handled by qemu
- "rep ins" and "rep outs" when the memory operand is any kind of MMIO
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Keir Fraser <keir@xen.org>
master commit: 14fcce2fa8
master date: 2013-09-23 09:55:14 +0200
... rather than just for the first byte.
While at it, also
- make the real mode case at least dpo a wrap around check
- drop the mis-named "gpf" label (we're not generating faults here)
and use in-place returns instead
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Keir Fraser <keir@xen.org>
master commit: 7f12732670
master date: 2013-09-23 09:53:55 +0200
in _csched_cpu_pick(), as not doing so may result in the domain's
node-affinity mask (as retrieved by csched_balance_cpumask() )
and online mask (as retrieved by cpupool_scheduler_cpumask() )
having an empty intersection.
Therefore, when attempting a node-affinity load balancing step
and running this:
...
/* Pick an online CPU from the proper affinity mask */
csched_balance_cpumask(vc, balance_step, &cpus);
cpumask_and(&cpus, &cpus, online);
...
we end up with an empty cpumask (in cpus). At this point, in
the following code:
....
/* If present, prefer vc's current processor */
cpu = cpumask_test_cpu(vc->processor, &cpus)
? vc->processor
: cpumask_cycle(vc->processor, &cpus);
....
an ASSERT (from inside cpumask_cycle() ) triggers like this:
(XEN) Xen call trace:
(XEN) [<ffff82d08011b124>] _csched_cpu_pick+0x1d2/0x652
(XEN) [<ffff82d08011b5b2>] csched_cpu_pick+0xe/0x10
(XEN) [<ffff82d0801232de>] vcpu_migrate+0x167/0x31e
(XEN) [<ffff82d0801238cc>] cpu_disable_scheduler+0x1c8/0x287
(XEN) [<ffff82d080101b3f>] cpupool_unassign_cpu_helper+0x20/0xb4
(XEN) [<ffff82d08010544f>] continue_hypercall_tasklet_handler+0x4a/0xb1
(XEN) [<ffff82d080127793>] do_tasklet_work+0x78/0xab
(XEN) [<ffff82d080127a70>] do_tasklet+0x5f/0x8b
(XEN) [<ffff82d080158985>] idle_loop+0x57/0x5e
(XEN)
(XEN)
(XEN) ****************************************
(XEN) Panic on CPU 1:
(XEN) Assertion 'cpu < nr_cpu_ids' failed at /home/dario/Sources/xen/xen/xen.git/xen/include/xe:16481
It is for example sufficient to have a domain with node-affinity
to NUMA node 1 running, and issueing a `xl cpupool-numa-split'
would make the above happen. That is because, by default, all
the existing domains remain assigned to the first cpupool, and
it now (after the cpupool-numa-split) only includes NUMA node 0.
This change prevents that by generalizing the function used
for figuring out whether a node-affinity load balancing step
is legit or not. This way we can, in _csched_cpu_pick(),
figure out early enough that the mask would end up empty,
skip the step all together and avoid the splat.
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Reviewed-by: George Dunlap <george.dunlap@eu.citrix.com>
master commit: 5e5a44b6c9
master date: 2013-09-20 11:37:28 +0200
Depending on the state of the conring and serial_tx_buffer,
console_force_unlock() can be a long running operation, usually because of
serial_start_sync()
XenServer testing has found a reliable case where console_force_unlock() on
one PCPU takes long enough for another PCPU to timeout due to the watchdog
(such as waiting for a tlb flush callin).
The watchdog timeout causes the second PCPU to repeat the
console_force_unlock(), at which point the first PCPU typically fails an
assertion in spin_unlock_irqrestore(&port->tx_lock) (because the tx_lock has
been unlocked behind itself).
console_force_unlock() is only on emergency paths, so one way or another the
host is going down. Disable the watchdog before forcing the console lock to
help prevent having pcpus completing with each other to bring the host down.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Keir Fraser <keir@xen.org>
master commit: 7b9fa702ca
master date: 2013-08-13 14:31:01 +0200
console_lock_busted gets set when an NMI/MCE/Double Fault handler decides to
bring Xen down in an emergency. conring_puts() cannot block and does
not have problematic interactions with the console_lock.
Therefore, choosing to not put the string into the console ring simply means
that the kexec environment cant find any panic() message caused by an IST
interrupt, which is unhelpful for debugging purposes.
In the case that two pcpus fight with console_force_unlock(), having slightly
garbled strings in the console ring is far more useful than having nothing at
all.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Matt Wilson <msw@amazon.com>
Acked-by: Keir Fraser <keir@xen.org>
master commit: 66450c1d1a
master date: 2013-08-06 17:45:00 +0200
Till now, when setting previously unset bits in XCR0 we wouldn't touch
the active register state, thus leaving in the newly enabled registers
whatever a prior user of it left there, i.e. potentially leaking
information between guests.
This is CVE-2013-1442 / XSA-62.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
master commit: 63a75ba0de
master date: 2013-09-25 10:41:25 +0200
Since xen-3.3 an official unplug protocol for emulated hardware is
available in the toolstack. The pvops kernel does the unplug per
default, so it is safe to do it also in the drivers for forward ported
xenlinux.
Currently its required to load xen-platform-pci with the module
parameter dev_unplug=all, which is cumbersome.
Also recognize the dev_unplug=never parameter, which provides the
default before this patch.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
master commit: df17e9c889
master date: 2013-09-20 11:41:08 +0200
Just like real hardware we ought to split such accesses transparently
to the caller. With little extra effort we can at once even handle page
crossing accesses correctly.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Keir Fraser <keir@xen.org>
master commit: 3b89f08a49
master date: 2013-09-20 11:01:08 +0200
If the allocation fails, make sure to call vmx_vmcs_exit().
This is a candidate for backport.
Signed-off-by: George Dunlap <george.dunlap@eu.citrix.com>
Signed-off-by: Mukesh Rathor <mukesh.rathor@oracle.com>
master commit: dad7e45bf4
master date: 2013-09-18 14:45:42 +0200
It looks like one of the failure cases in hvm_vcpu_initialise jumps to
the wrong label; this could lead to slow leaks if something isn't
cleaned up properly.
I will probably change these labels in a future patch, but I figured
it was better to have this fix separately.
This is also a candidate for backport.
Signed-off-by: George Dunlap <george.dunlap@eu.citrix.com>
Signed-off-by: Mukesh Rathor <mukesh.rathor@oracle.com>
master commit: 925fbcb7fd
master date: 2013-09-18 14:45:24 +0200
Discovered by Coverity, CID 1055181
core2_vpmu_dump() was incorrectly setting VPMU_CONTEXT_LOADED when it
was intending to check for it.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
This would have been avoided if the dump function declared all its
pointers "const" - doing this now (also in SVM).
Also fixing some indentation issues at once.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
master commit: 42c5b12140
master date: 2013-09-16 12:22:20 +0200
.. as that function is not idempotent (it always alters the table
checksum). The (generally) duplicate call was a result from it being
made before machine_restart() re-invoking itself on the boot CPU.
Considering that no problem arose so far from the table corruption I
doubt that we need to restore the correct table signature on the
reboot path in general. The only case I can see this as potentially
necessary is the tboot one, hence do the call just in that case.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Keir Fraser <keir@xen.org>
master commit: a54dc5f4fe
master date: 2013-09-13 14:27:34 +0200
The switch-over logic from one page directory to the next was wrong;
it needs to be deferred until we actually reach the last page within
a given region, instead of being done when the last entry of a page
directory gets started with.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
master commit: 06d0868321
master date: 2013-09-12 17:41:04 +0200
For one setup_max_pdx(), when invoked a second time (after SRAT got
parsed), needs to start from the original max_page value again (using
the already adjusted one from the first invocation would not allow the
cut-off boundary to be moved up).
Second, _if_ we need to cut off some part of memory, we must not allow
this to also propagate into the NUMA accounting. Otherwise
cutoff_node() results in nodes_cover_memory() to find some parts of
memory apparently not having a PXM association, causing all SRAT info
to be ignored.
The only possibly problematic consumer of node_spanned_pages (the
meaning of which gets altered here in that it now also includes memory
Xen can't actively make use of) is XEN_SYSCTL_numainfo: At a first
glance the potentially larger reported memory size shouldn't confuse
tool stacks.
And finally we must not put our boot time modules at addresses which
(at that time) can't be guaranteed to be accessible later. This applies
to both the EFI boot loader and the module relocation code.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Keir Fraser <keir@xen.org>
Acked-by: Dario Faggioli <dario.faggioli@citrix.com>
master commit: 8efce9d699
master date: 2013-09-12 09:52:53 +0200
The return value of vasprintf must be checked. This check is enforced
with the compiler options used in Debian by request and in Ubuntu by
default.
Check the return value and abort on error.
Signed-off-by: Bastian Blank <waldi@debian.org>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
(cherry picked from commit 1efe90faa3)
The bit 31 of revision_id will set to 1 if vmcs shadowing enabled. And
according intel SDM, the bit 31 of IA32_VMX_BASIC MSR is always 0. So we
cannot set low 32 bit of IA32_VMX_BASIC to revision_id directly. Must clear
the bit 31 to 0.
Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
master commit: f3a4eb9253
master date: 2013-09-10 16:41:35 +0200
With CPUID features suitably masked this is supposed to work, but was
completely broken (i.e. the case wasn't even considered when the
original xsave save/restore code was written).
First of all, xsave_enabled() wrongly returned the value of
cpu_has_xsave, i.e. not even taking into consideration attributes of
the vCPU in question. Instead this function ought to check whether the
guest ever enabled xsave support (by writing a [non-zero] value to
XCR0). As a result of this, a vCPU's xcr0 and xcr0_accum must no longer
be initialized to XSTATE_FP_SSE (since that's a valid value a guest
could write to XCR0), and the xsave/xrstor as well as the context
switch code need to suitably account for this (by always enforcing at
least this part of the state to be saved/loaded).
This involves undoing large parts of c/s 22945:13a7d1f7f62c ("x86: add
strictly sanity check for XSAVE/XRSTOR") - we need to cleanly
distinguish between hardware capabilities and vCPU used features.
Next both HVM and PV save code needed tweaking to not always save the
full state supported by the underlying hardware, but just the parts
that the guest actually used. Similarly the restore code should bail
not just on state being restored that the hardware cannot handle, but
also on inconsistent save state (inconsistent XCR0 settings or size of
saved state not in line with XCR0).
And finally the PV extended context get/set code needs to use slightly
different logic than the HVM one, as here we can't just key off of
xsave_enabled() (i.e. avoid doing anything if a guest doesn't use
xsave) because the tools use this function to determine host
capabilities as well as read/write vCPU state. The set operation in
particular needs to be capable of cleanly dealing with input that
consists of only the xcr0 and xcr0_accum values (if they're both zero
then no further data is required).
While for things to work correctly both sides (saving _and_ restoring
host) need to run with the fixed code, afaict no breakage should occur
if either side isn't up to date (other than the breakage that this
patch attempts to fix).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Yang Zhang <yang.z.zhang@intel.com>
Acked-by: Keir Fraser <keir@xen.org>
master commit: 4cc1344447
master date: 2013-09-09 14:36:54 +0200
- properly validate available feature set on APs
- also validate xsaveopt availability on APs
- properly indicate whether the initialization is on the BSP (we
shouldn't be using "cpu == 0" checks for this)
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Keir Fraser <keir@xen.org>
master commit: c6066e78f4
master date: 2013-08-30 10:56:07 +0200
Jan Beulich
Andrew Cooper
Ian Jackson
Daniel De Graaf
Dario Faggioli
Matthew Daley
Yang Zhang
Tim Deegan
Olaf Hering
George Dunlap
Bastian Blank