Move dev_dict_to_sxp() into XendSXPDev.py. Move
pci_convert_dict_to_sxp() and pci_convert_sxp_to_dict() to pci.py,
where other similar functions live. This makes these functions
accessible outside of the XendConfig class.
Signed-off-by: Simon Horman <horms@verge.net.au>
Share some parsing code between different parts of xm.
This has the side-effect that the device specification for
hot-plug may now include the VSLOT and OPTS as per device
specifictions in the domain configuration file.
SEQ:BUS:DEV.FUNC[,OPT...]
e.g. 0000:00:01.00@6
Signed-off-by: Simon Horman <horms@verge.net.au>
While pretty simplistic, it appears to serve the purpose at the moment
(i.e. it spotted two places where a GNU extension was used withou
proper preprocessor conditionals). The "simplistic" here includes that
the checking gets only done for native builds, and ia64 gets excluded
due to its arch-specific header intentionally (for whatever reason)
checking that anonymous struct/unions can be used.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
This implicitly required coverting the tmem_op structure from
anonymous to standard struct/union sub-fields, and extending the
get-fields.sh helper script to deal with typedef-ed guest handles used
as types of translated compound type fields.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Avoid longjmp as it has different semantics than on Intel CPUs in long
mode. Also add a few comments and remove a pointless reload of DS.
Signed-off-by: Christoph Egger <Christoph.Egger@amd.com>
Signed-off-by: Keir Fraser <keir.fraser@eu.citrix.com>
While the original logic already implied that the kernel part of the
guest's address space is identical on all vCPU-s (i.e. for all guest
processes), it didn't fully leverage the potential here: As long as
the top page table currently active is owned by the subject domain
(currently only Dom0), the stack dump can be done without extra
effort.
For x86-64, additionally add page table traversal so that the stack
can be dumped in all cases (unless it's invalid or user space).
I left the 32-bit variant of do_page_walk() unimplemented for the
moment as I couldn't convince myself using map_domain_page() there is
a good idea, and didn't want to introduce new fixmap entries either.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Use iommu_qinval in place of qinval_enabled flag. Use
ecap_queued_inval() for determining whether queued invalidation is
available on this vt-d engine or not.
Signed-off-by: Allen Kay <allen.m.kay@intel.com>
After restore/migration, the xenctx command for auxiliary vcpus
fails with a message "xc_vcpu_getcontext: No data available".
Signed-off-by: Kouya Shimura <kouya@jp.fujitsu.com>
- don't mis-use guest handle for passing an MFN value
- eliminate unnecessary (and misplaced) use of XEN_GUEST_HANDLE_64
- use copy_from_guest() instead of __copy_from_guest() for loading the
argument structure
Signed-off-by: Jan Beulich <jbeulich@novell.com>
sxp.merge() can't deal with values being a list so instead
of storing pci options as:
[ 'opts', [ 'key1' 'value1'], [ 'key2', 'value2'], ...]
store them as:
[ 'opts', [ 'key1' 'value1'], ['opts', [ 'key2', 'value2']], ...
Signed-off-by: Simon Horman <horms@verge.net.au>
As observed by Dexuan Cui, when PCI devices are passed through at
domain-creation-time setupOneDevice() will be called twice.
Once via setupDevice() and once via econfigureDevice() which
is called in pci_device_configure().
This patch removes the first of these.
Cc: Dexuan Cui <dexuan.cui@intel.com>
Cc: Masaki Kanno <kanno.masaki@jp.fujitsu.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
It should get lock to write VT-d registers. Currently there are some
register writes without lock. This patch complements register_lock for
those writes.
Signed-off-by: Weidong Han <weidong.han@intel.com>
SRTP (Set Root Table Pointer) operation must be set before enable or
re-enable DMA remapping. And after set it, software must globally
invalidate the context-cache and then globally invalidate the
IOTLB. This is required to ensure hardware uses only the remapping
structures referenced by the new root-table pointer, and not stale
cached entries. Similarly, SIRTP (Set Interrupt Remap Table Pointer)
operation must be set before enable or re-enable Interrupt
remapping, and after set it, software must globally invalidate the
interrupt entry cache. This patch adds global context and iotlb
flush after set root entry, and globally flushs interrupt entry
cache before enabling Interrupt remapping. And remove the
iommu_flush_all in iommu_resume becuase it becomes redundant after
adds flush for SRTP in init_vtd_hw.
Signed-off-by: Weidong Han <weidong.han@intel.com>
This patch adds a new command line argument to xenconsole to specify
to which console to connect to in case a domain has more than one.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reset a counter when all tmem pages are released. This
only affects status reporting (as displayed by xm tmem-list
or the just patched xenballoon-monitor) but the incorrectly
reported result is misleading.
Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
and monitor tool
This patch adds tmem support to the largely unknown/unused
xenballoond scripts that implement both self-ballooning and
a foundation for directed-ballooning. Tmem and automated
ballooning are highly complementary in that, when ballooning
is over-aggressive, paging and swapping can increase noticably.
Precache preserves evicted pages that may be needed again soon
(thus eliminating disk reads) and preswap provides memory-based
swapping that occurs if ballooning is insufficiently responsive
to a sudden increase in activity and memory demand (thus
eliminating disk writes and reads).
There are two changes in this patch:
1) The xenballoond service is a convenient place to implement
userland "preswap shrinking".**
2) The xenballoon-monitor script is a convenient place to
report (and view with "watch -d") the frequent memory
rebalancing that results from tmem usage on a busy system.
Note that for best results (and for the monitor script to
work), the xenstore-* tools should be installed on each guest.
(** In a disk-based swap device, stale pages are often left
on-disk even after they are no longer needed or valid; they
are simply overwritten if/when the disk blocks are needed
again, which may be a very long time. Preswap behaves
much like a disk, but uses precious pages of memory that
count against a guest's memory allocation; thus stale
pages are very undesirable. Preswap shrinking periodically
attempts to remove stale pages from preswap by using a
sysfs interface created by the linux-side tmem patch.)
Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Recently the format of the tap syntax in the config file changed to
using a 4 part specifier (tap:tapdisk:<format>:<filename>) instead
of the old 3-part one (tap:<qcow>:<filename>).
This breaks compatibility with existing config files: a guest start
will throw a Python exception and will be aborted.
AFAICS currently tap:tapdisk is redundant, so the attached patch
simply catches the above mentioned exception and tries to parse the
old format in this case.
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
When an UC = 1 PCC = 0 MCE happens, there're more types of software
recoverable error defined on on latest Intel Platform. For identifying
those new errors, some new bit (S/AR bit) is defined in MCi_STATUS
register. Also we need MCACOD help's to judge the detailed
error. Combined with the OVER bit, different recovery policies are
required for containing those new errors.
SRAO error is an software recoverable MCA error, no recovery action
required. while SRAR is an software recoverable MCA error, recovery
action is required.
Signed-off-by: Liping Ke <liping.ke@intel.com>
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>
make install in vhd and daemon, subdirs-all and subdirs-install
are invoked parallel causing nasty error.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Keir Fraser <keir.fraser@eu.citrix.com>
As promised, this brings the long out-of-sync documentation up to
date, and adds some getting started information about tapdisk driver
development - I get the occasional email on this latter subject.
Signed-off-by: Dutch Meyer <dmeyer@cs.ubc.ca>
Per VT-d spec, software should submit only one "incremental" command
at a time to Global Command reigster. Current implementation uses a
variable (gcmd) to record the state of Global Status register. It's
error prone.
Signed-off-by: Weidong Han <weidong.han@intel.com>
When set some registers of VT-d, it must wait for hardware
completion. There are lots of duplicated code to do that. This patch
defines a macro for it, thus it is much cleaner.
Signed-off-by: Weidong Han <weidong.han@intel.com>
This patch removes global variable "vtd_enabled", which is
redundant. "iommu_enabled" is enough. And also removes useless global
variables qi_ctrl and ir_ctrl, which are not used at all.
Signed-off-by: Weidong Han <weidong.han@intel.com>
Keir Fraser