Add the new MISRA C rules agreed by the MISRA C working group to
docs/misra/rules.rst.
Add a comment for Rule 19.1 to explain that Eclair's findings are
"caution" reports, not violations.
Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
At the moment, we define lots of test jobs in test.yaml, that make use
of the same configuration sections like variables, tags, artifacts.
Introduce templates (hidden jobs whose names start with a dot) to
reduce the overhead and simplify the file (more than 100 lines saved).
This way, the actual jobs can only specify sections that are unique
to them.
Most of the test jobs specify the same set of prerequisite jobs under
needs property with just one additional being unique to the job itself.
Introduce YAML anchors for that purpose, because when using extends, the
needs property is not being merged (the parent property overwrites the
child one).
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
After qemu arm64 test scripts had been renamed to reflect their
usage, do the same for the qemu arm32 test script. Currently it only
boots dom0, so we can assume that this script will be used to perform
dom0 based testing. In the future we will be able to create corresponding
script qemu-smoke-dom0less-arm32.sh to perform dom0less based testing.
This is the last step to get rid of ambiguity with regards to naming
of Arm test scripts.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
qemu-alpine-arm64.sh script is used to perform dom0 based testing.
Rename this script to qemu-smoke-dom0-arm64.sh to reflect its usage.
Also rename the corresponding test jobs.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Testing arm64 is done using the qemu-alpine-arm64.sh and
qemu-smoke-arm64.sh scripts. These scripts are executed with exactly
the same artifacts (container, rootfs, kernel, qemu) and the only
difference is that the former is used to perform dom0 based testing
and the latter - dom0less based testing.
Because the current naming is quite ambiguous, rename qemu-smoke-arm64.sh
script to qemu-smoke-dom0less-arm64.sh to reflect its usage.
qemu-alpine-arm64.sh will be renamed in the follow-up patch.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Perform the following cleanup:
- rename the device tree from virt-gicv3 to virt-gicv2 as the GIC version
used in this test is v2,
- use fdtput to perform modifications on the dtb,
- use DEBIAN_FRONTEND=noninteractive to prevent interactive prompt being
stuck waiting for answer other than "yes",
- fix the number of cpus in the device tree because currently we generate
it with a single cpu and try to run QEMU with two,
- fix the memory size we pass when generating QEMU device tree as it does
not match the memory size with what we run QEMU.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Take an example from arm64 qemu test scripts and use ImageBuilder
to generate u-boot script automatically. Calculating the addresses
manually is quite error prone and also we will be able to benefit
from using ImageBuilder when adding domUs to this test in the future.
Install and use u-boot from the debian package.
Modify the script so that binaries are loaded from u-boot via tftp.
Remove dtuart=/pl011@9000000 because stdout-path in QEMU dtb is always
set to pl011 node path.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Luca Fancellu <luca.fancellu@arm.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Script automation/scripts/containerize makes it easy to build Xen within
predefined containers from gitlab container registry. This script is
currently missing the helpers to select Arm containers, so populate the
necessary entries.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
At the moment, all the tests are executed on non-debug Xen builds.
To improve the coverage (e.g. we might catch some asserts), add new
test jobs using debug Xen builds.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Luca Fancellu <luca.fancellu@arm.com>
In the follow-up patch we will add new jobs using debug Xen builds.
Because the debug builds take more space and we might end up in
a situation when there is not enough free space (especially during
a static memory test that reserves some region in the middle), increase
RAM size for QEMU from 1GB to 2GB.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Luca Fancellu <luca.fancellu@arm.com>
For arm64 we perform builds using debian and alpine containers.
We are missing the randconfig build jobs for the latter, so add them.
This way for each container we have 4 fundamental build jobs:
- defconfig non-debug/debug
- randconfig non-debug/debug
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Luca Fancellu <luca.fancellu@arm.com>
The binding for xc_interface_close() free the underlying handle while leaving
the Ocaml object still in scope and usable. This would make it easy to suffer
a use-after-free, if it weren't for the fact that the typical usage is as a
singleton that lives for the lifetime of the program.
Ocaml 5 no longer permits storing a naked C pointer in an Ocaml value.
Therefore, use a Custom block. This allows us to use the finaliser callback
to call xc_interface_close(), if the Ocaml object goes out of scope.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
strdup() may return NULL. Check for this before passing to syslog().
Drop const from c_msg. It is bogus, as demonstrated by the need to cast to
void * in order to free the memory.
Signed-off-by: Edwin Török <edvin.torok@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Unhandled exceptions go to stderr by default, but this doesn't typically work
for oxenstored because:
* daemonize reopens stderr as /dev/null
* systemd redirects stderr to /dev/null too
Debugging an unhandled exception requires reproducing the issue locally when
using --no-fork, and is not conducive to figuring out what went wrong on a
remote system.
Install a custom handler which also tries to render the backtrace to the
configured syslog facility, and DAEMON|ERR otherwise.
Signed-off-by: Edwin Török <edvin.torok@citrix.com>
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
During live update, oxenstored tries a best effort approach to recover as many
domains and information as possible even if it encounters errors restoring
some domains.
However, logging about misunderstood input is more severe than simply info.
Log it at warning instead.
Signed-off-by: Edwin Török <edvin.torok@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Closing the evtchn handle will unbind and free all local ports. The new
xenstored would need to rebind all evtchns, which is work that we don't want
or need to be doing during the critical handover period.
However, it turns out that the Windows PV drivers also rebind their local port
too across suspend/resume, leaving (o)xenstored with a stale idea of the
remote port to use. In this case, reusing the established connection is the
only robust option.
Therefore:
* Have oxenstored open /dev/xen/evtchn without CLOEXEC at start of day.
* Extend the handover information with the evtchn fd, domexc virq local port,
and the local port number for each domain connection.
* Have (the new) oxenstored recover the open handle using Xeneventchn.fdopen,
and use the provided local ports rather than trying to rebind them.
When this new information isn't present (i.e. live updating from an oxenstored
prior to this change), the best-effort status quo will have to do.
Signed-off-by: Edwin Török <edvin.torok@citrix.com>
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Inter-domain event channels are always a pair of local and remote ports.
Right now the handling is asymmetric, caused by the fact that the evtchn is
bound after the associated Domain object is constructed.
First, move binding of the event channel into the Domain.make() constructor.
This means the local port no longer needs to be an option. It also removes
the final callers of Domain.bind_interdomain.
Next, introduce a new port_pair type to encapsulate the fact that these two
should be updated together, and replace the previous port and remote_port
fields. This refactoring also changes the Domain.get_port interface (removing
an option) so take the opportunity to name it get_local_port instead.
Also, this fixes a use-after-free risk with Domain.close. Once the evtchn has
been unbound, the same local port number can be reused for a different
purpose, so explicitly invalidate the ports to prevent their accidental misuse
in the future.
This also cleans up some of the debugging, to always print a port pair.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Edwin Török <edvin.torok@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Generally speaking, the event channel local/remote port is fixed for the
lifetime of the associated domain object. The exception to this is a
secondary XS_INTRODUCE (defined to re-bind to a new event channel) which pokes
around at the domain object's internal state.
We need to refactor the evtchn handling to support live update, so start by
moving the relevant manipulation into Domain.
No practical change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Edwin Török <edvin.torok@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
This will make the logic clearer when we plumb local_port through these
functions.
While doing this, rearrange the construct in Domains.create0 to separate the
remote port handling from the interface handling. (The interface logic is
dubious in several ways, but not altered by this cleanup.)
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Edwin Török <edvin.torok@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Xenstored always needs to bind the DOM_EXC VIRQ.
Instead of doing it shortly after the call to Event.init(), do it in the
constructor directly. This removes the need for the field to be a mutable
option.
It will also simplify a future change to support live update. Rename the
field from virq_port (which could be any VIRQ) to it's proper name.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Edwin Török <edvin.torok@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
This file has some style problems so severe that they interfere with the
readability of the subsequent bugfix patches.
Fix these issues ahead of time, to make the subsequent changes more readable.
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Edwin Török <edvin.torok@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
For live update, oxenstored wants to clear CLOEXEC on the evtchn handle, so it
survives the execve() into the new oxenstored.
Have the new interface match how cloexec works in other Ocaml standard
libraries.
Signed-off-by: Edwin Török <edvin.torok@citrix.com>
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
There is no binding for xenevtchn_close(). In principle, this is a resource
leak, but the typical usage is as a singleton that lives for the lifetime of
the program.
Ocaml 5 no longer permits storing a naked C pointer in an Ocaml value.
Therefore, use a Custom block. This allows us to use the finaliser callback
to call xenevtchn_close(), if the Ocaml object goes out of scope.
Signed-off-by: Edwin Török <edvin.torok@citrix.com>
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
A debug statement got inserted into a single-expression if statement.
Insert brackets to give the intended meaning, rather than the actual meaning
where the "let con = Connections..." is outside and executed unconditionally.
This results in some unnecessary ring checks for domains which otherwise have
IO credit.
Fixes: 42f0581a91 ("tools/oxenstored: Implement live update for socket connections")
Reported-by: Edwin Török <edvin.torok@citrix.com>
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
domain_getinfolist() is quadratic with the number of domains, because of the
behaviour of the underlying hypercall. Nevertheless, getting domain info in
blocks of 1024 is far more efficient than blocks of 2.
In a scalability testing scenario with ~1000 VMs, a combination of this and
the previous change takes xenopsd's wallclock time in domain_getinfolist()
down from 88% to 0.02%
Signed-off-by: Edwin Török <edvin.torok@citrix.com>
Tested-by: Pau Ruiz Safont <pau.safont@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
domain_getinfolist() is quadratic with the number of domains, because of the
behaviour of the underlying hypercall. xenopsd was further observed to be
wasting excessive quantites of time manipulating the list of already-obtained
domains.
Implement a tail recursive `rev_concat` equivalent to `concat |> rev`, and use
it instead of calling `@` multiple times.
An incidental benefit is that the list of domains will now be in domid order,
instead of having pairs of 2 domains changing direction every time.
In a scalability testing scenario with ~1000 VMs, a combination of this and
the subsequent change takes xenopsd's wallclock time in domain_getinfolist()
down from 88% to 0.02%
Signed-off-by: Edwin Török <edvin.torok@citrix.com>
Tested-by: Pau Ruiz Safont <pau.safont@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Use actual include directory used to install the public header in
COPYING file.
Also, move the input file out of "tools/include/xen/" because that
directory is removed on `make clean`.
We can't used ./configure because $includedir contain another
variable, so the change is done in Makefile.
Fixes: 4ea75e9a90 ("Rework COPYING installed in /usr/include/xen/, due to several licences")
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Some time ago, Linux switched the format of docs to ReST and the format
of device-tree bindings to json-schema.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
Release-acked-by: Henry Wang <Henry.Wang@arm.com>
The error message accidentally printed the bytes value as if it were kB.
Furthermore, both b_info.shadow_memkb and shadow_mem are uint64_t, meaning
there is a risk of overflow if the user specified a stupidly large value in
the vm.cfg file. Check and reject such a condition.
Fixes: 7c3bbd940d ("xen/arm, libxl: Revert XEN_DOMCTL_shadow_op; use p2m mempool hypercalls")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Release-acked-by: Henry Wang <Henry.Wang@arm.com>
Commit 34990446ca started to overwrite the `rc` value from
libxl__arch_domain_create(), thus error aren't propagated anymore.
Check `rc` value before doing the next thing.
Fixes: 34990446ca ("libxl: don't ignore the return value from xc_cpuid_apply_policy")
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Jason Andryuk <jandryuk@gmail.com>
Release-acked-by: Henry Wang <Henry.Wang@arm.com>
On one of my boxes when the HDMI cable is not plugged in the
FrameBufferBase of the EFI_GRAPHICS_OUTPUT_PROTOCOL_MODE structure is
set to 0 by the firmware (while some of the other fields looking
plausible).
Such (bogus address) ends up mapped in vesa_init(), and since it
overlaps with a RAM region the whole system goes down pretty badly,
see:
(XEN) vesafb: framebuffer at 0x0000000000000000, mapped to 0xffff82c000201000, using 35209k, total 35209k
(XEN) vesafb: mode is 0x37557x32, linelength=960, font 8x16
(XEN) vesafb: Truecolor: size=8:8:8:8, shift=24:0:8:16
(XEN) (XEN) (XEN) (XEN) (XEN) (XEN) (XEN) (XEN) �ERROR: Class:0; Subclass:0; Operation: 0
ERROR: No ConOut
ERROR: No ConIn
Do like Linux and prevent using the EFI Frame Buffer if the base
address is 0. This is inline with the logic in Linuxes
fb_base_is_valid() function at drivers/video/fbdev/efifb.c v6.0.9.
See also Linux commit 133bb070e94ab41d750c6f2160c8843e46f11b78 for
further reference.
Also prevent using Frame Buffers that have a 0 height or width, as
those are also invalid.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Release-acked-by: Henry Wang <Henry.Wang@arm.com>
Allocating or freeing p2m pages doesn't alter the size of the mempool; only
the split between free and used pages.
Right now, the hypercalls operate on the free subset of the pool, meaning that
XEN_DOMCTL_get_paging_mempool_size varies with time as the guest shuffles its
physmap, and XEN_DOMCTL_set_paging_mempool_size ignores the used subset of the
pool and lets the guest grow unbounded.
This fixes test-pagign-mempool on ARM so that the behaviour matches x86.
This is part of XSA-409 / CVE-2022-33747.
Fixes: cbea5a1149 ("xen/arm: Allocate and free P2M pages from the P2M pool")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
Release-acked-by: Henry Wang <Henry.Wang@arm.com>
This reverts most of commit cf2a68d2ff, and bits
of cbea5a1149.
First of all, with ARM borrowing x86's implementation, the logic to set the
pool size should have been common, not duplicated. Introduce
libxl__domain_set_paging_mempool_size() as a shared implementation, and use it
from the ARM and x86 paths. It is left as an exercise to the reader to judge
how libxl/xl can reasonably function without the ability to query the pool
size...
Remove ARM's p2m_domctl() infrastructure now the functioanlity has been
replaced with a working and unit tested interface.
This is part of XSA-409 / CVE-2022-33747.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Release-acked-by: Henry Wang <Henry.Wang@arm.com>
Exercise some basic functionality of the new
xc_{get,set}_paging_mempool_size() hypercalls.
This passes on x86, but fails currently on ARM. ARM will be fixed up in
future patches.
This is part of XSA-409 / CVE-2022-33747.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Release-acked-by: Henry Wang <Henry.Wang@arm.com>
The existing XEN_DOMCTL_SHADOW_OP_{GET,SET}_ALLOCATION have problems:
* All set_allocation() flavours have an overflow-before-widen bug when
calculating "sc->mb << (20 - PAGE_SHIFT)".
* All flavours have a granularity of 1M. This was tolerable when the size of
the pool could only be set at the same granularity, but is broken now that
ARM has a 16-page stopgap allocation in use.
* All get_allocation() flavours round up, and in particular turn 0 into 1,
meaning the get op returns junk before a successful set op.
* The x86 flavours reject the hypercalls before the VM has vCPUs allocated,
despite the pool size being a domain property.
* Even the hypercall names are long-obsolete.
Implement a better interface, which can be first used to unit test the
behaviour, and subsequently correct a broken implementation. The old
interface will be retired in due course.
The unit of bytes (as opposed pages) is a deliberate API/ABI improvement to
more easily support multiple page granularities.
This is part of XSA-409 / CVE-2022-33747.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Release-acked-by: Henry Wang <Henry.Wang@arm.com>
I was really hoping to avoid this, but its now too late in the 4.17 freeze and
we still don't have working fixes.
The in-Xen calculations for assistance capabilities are buggy. For the
avoidance of doubt, the original intention was to be able to control every
aspect of a APIC acceleration so we could comprehensively test Xen's support,
as it has proved to be buggy time and time again.
Even after a protracted discussion on what the new API ought to mean, attempts
to apply it to the existing logic have been unsuccessful, proving that the
API/ABI is too complicated for most people to reason about.
This reverts most of:
2ce11ce2496b2b9b3405
leaving in place the non-APIC specific changes (minimal as they are).
This takes us back to the behaviour of Xen 4.16 where APIC acceleration is
configured on a per system basis.
This work will be revisted in due course.
Fixes: 2ce11ce249 ("x86/HVM: allow per-domain usage of hardware virtualized APIC")
Fixes: 6b2b9b3405 ("x86: report Interrupt Controller Virtualization capabilities")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Release-acked-by: Henry Wang <Henry.Wang@arm.com>
The notice in the COPYING file in "xen/include/public/COPYING" doesn't
really apply to the files that ultimately are been install at
"/usr/include/xen". The issue are headers in the "sys/" subdirectory
that comes from other projects such as Linux or FreeBSD.
The main issue is that there are two headers that have a different
licence than the MIT licence:
- xen-sys/Linux/gntalloc.h (installed as "sys/gntalloc.h") is public
domain.
- xen-sys/FreeBSD/gntdev.h (installed as "sys/gntdev.h") is BSD-2.
To clarify this, we'll install a COPYING file with a different notice.
Reported-by: Andrew Cooper <Andrew.Cooper3@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Release-acked-by: Henry Wang <Henry.Wang@arm.com>
This header have been created by moving code from other part of the
project and miss a licence header. The original source code was some
version of GPL or LGPL but we intend to have the public header to be
MIT so they can be included easily in other projects.
Part of device_tree_defs.h were moved from libxl_arm.c which is
LGPL-2.1-only. And part were moved from device_tree.h that is
GPL-2.0-only.
Part of the original code were added by Julien Grall @ Linaro in
commits c3ba52a84d and 405c167f0e and 886f34045b. The other part
were added by Ian Campbell @ Citrix, with commit 0c64527e7f.
Resolves: xen-project/xen#35
Fixes: 1c898a9fec ("xen/arm: move a few DT related defines to public/device_tree_defs.h")
Reported-by: Andrew Cooper <Andrew.Cooper3@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com> [Citrix relicensing]
Acked-by: Grant Likely <grant.likely@linaro.org> [Linaro relicensing]
Release-acked-by: Henry Wang <Henry.Wang@arm.com>
The headers install in "/usr/include/xen/foreign/" are missing a
licence header. This patch adds a SPDX identifier to clarify that
the MIT licence is used.
The script now check that the licence of the input file is also MIT,
by checking for the presence of the SPDX identifier.
Also add information about which files are used to generate the
headers.
Reported-by: Andrew Cooper <Andrew.Cooper3@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Release-acked-by: Henry Wang <Henry.Wang@arm.com>
The script "tools/include/xen-foreign/mkheader.py" is going to do a
sanity check on the licences of these headers. To ease this, we will
replace the verbatim copy of the MIT licence by its SPDX identifier
equivalent.
The text of the licence has been check to be the same as the one at
https://spdx.org/licenses/MIT.html, except we don't have "(including
the next paragraph)". The text is also the same as the one in
"xen/include/public/COPYING".
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Release-acked-by: Henry Wang <Henry.Wang@arm.com>
Stefano Stabellini