A file descriptor leak was detected after creating multiple domUs with
pass-through PCI devices. This patch fixes the issue.
Signed-off-by: Xi Xiong <xixiong@amazon.com>
Reviewed-by: Matt Wilson <msw@amazon.com>
[msw: adjusted commit message]
Signed-off-by: Matt Wilson <msw@amazon.com>
master commit: 749019afca
master date: 2013-09-03 16:36:52 +0100
Newer PCI standards (e.g., PCI-X 2.0 and PCIe) introduce extended
configuration space which is larger than 256 bytes. This patch uses
stat() to determine the amount of space used to correctly save all of
the PCI configuration space. Resets handled by the xen-pciback driver
don't have this problem, as that code correctly handles saving
extended configuration space.
Signed-off-by: Steven Noonan <snoonan@amazon.com>
Reviewed-by: Matt Wilson <msw@amazon.com>
[msw: adjusted commit message]
Signed-off-by: Matt Wilson <msw@amazon.com>
master commit: 1893cf7799
master date: 2013-09-03 16:36:47 +0100
The old code for OEM SMBios strings was:
char path[20] = "bios-strings/oem-XX";
path[(sizeof path) - 3] = '0' + ((i < 10) ? i : i / 10);
path[(sizeof path) - 2] = (i < 10) ? '\0' : '0' + (i % 10);
Where oem-1 thru 9 specifically had no leading 0.
However, the definition of HVM_XS_OEM_STRINGS specifically requires leading
0s.
This regression was introduced by the combination of c/s 4d23036e70 and
e64c3f71ce
I realise that this patch causes a change to the public headers. However I
feel it is justified as:
* All toolstacks used to have to embed the magic string (and almost certainly
still do)
* If by some miriacle a new toolstack has started using the new define will
continue to work.
* The only intree consumer of the define is hvmloader itself.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Keir Fraser <keir@xen.org>
master commit: 0f4cb23c3e
master date: 2013-08-30 10:40:48 +0200
Fixes regression indirectly introduced by c/s 4d23036e70
That changeset added some smbios tables which were option based on the
toolstack providing appropriate xenstore keys. The do_struct() macro would
unconditionally increment nr_structs, even if a table was not actually
written.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Keir Fraser <keir@xen.org>
master commit: 4aa19549e1
master date: 2013-08-30 10:40:29 +0200
- we used the C4/C5 (first prefix) byte instead of the apparent ModR/M
one as the second prefix byte
- early decoding normalized vex.reg, thus corrupting it for the main
consumer (copy_REX_VEX()), resulting in #UD on the two-operand
instructions we emulate
Also add respective test cases to the testing utility plus
- fix get_fpu() (the fall-through order was inverted)
- add cpu_has_avx2, even if it's currently unused (as in the new test
cases I decided to refrain from using AVX2 instructions in order to
be able to actually run all the tests on the hardware I have)
- slightly tweak cpu_has_avx to more consistently express the outputs
we don't care about (sinking them all into the same variable)
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Keir Fraser <keir@xen.org>
master commit: 062919448e
master date: 2013-08-28 17:03:50 +0200
In particular, MMIO assignments should not be done using this area.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by Xiantao Zhang <xiantao.zhang@intel.com>
master commit: 850188e127
master date: 2013-08-27 11:11:38 +0200
We shouldn't accept IVHD tables specifying IO-APIC IDs beyond the limit
we support (MAX_IO_APICS, currently 128).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Suravee Suthikulpanit <suravee.suthikulapanit@amd.com>
master commit: 3785d30efe
master date: 2013-08-29 09:31:37 +0200
init_timer cannot be safely called multiple times on same timer since it does memset(0)
on the structure, erasing the auxiliary member used by linked list code. This breaks
inactive timer list in common/timer.c.
Moved resume_timer initialisation to ns16550_init_postirq, so it's only done once.
Signed-off-by: Tomasz Wroblewski <tomasz.wroblewski@citrix.com>
Acked-by: Keir Fraser <keir@xen.org>
master commit: 9e2c593824
master date: 2013-08-28 10:18:39 +0200
... according to their most recent public documentation.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Keir Fraser <keir@xen.org>
master commit: 3e787021fb
master date: 2013-08-27 11:15:15 +0200
add check logic when read from IO ring, and if error happens,
then mark the reading connection as "bad", Unless vm reboot,
oxenstored will not handle message from this connection any more.
xs_ring_stubs.c: add a more strict check on ring reading
connection.ml, domain.ml: add getter and setter for bad flag
process.ml: if exception raised when reading from domain's ring,
mark this domain as "bad"
xenstored.ml: if a domain is marked as "bad", do not handle it.
Signed-off-by: John Liu <john.liuqiming@huawei.com>
Acked-by: David Scott <dave.scott@eu.citrix.com>
(cherry picked from commit 704302ce94)
If enabling APIC-v, all interrupts to L1 are delivered through APIC-v.
But when L2 is running, external interrupt will casue L1 vmexit with
reason external interrupt. Then L1 will pick up the interrupt through
vmcs12. when L1 ack the interrupt, since the APIC-v is enabled when
L1 is running, so APIC-v hardware still will do vEOI updating. The problem
is that the interrupt is delivered not through APIC-v hardware, this means
SVI/RVI/vPPR are not setting, but hardware required them when doing vEOI
updating. The solution is that, when L1 tried to pick up the interrupt
from vmcs12, then hypervisor will help to update the SVI/RVI/vPPR to make
sure the following vEOI updating and vPPR updating corrently.
Also, since interrupt is delivered through vmcs12, so APIC-v hardware will
not cleare vIRR and hypervisor need to clear it before L1 running.
Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com>
Acked-by: "Dong, Eddie" <eddie.dong@intel.com>
master commit: 84e6af5870
master date: 2013-08-22 10:59:01 +0200
There is no vAPIC-v support, so mask APIC-v control bit when
constructing vmcs02.
Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com>
Acked-by: "Dong, Eddie" <eddie.dong@intel.com>
master commit: 375a103500
master date: 2013-08-22 10:52:05 +0200
External interrupt is allowed to notify CPU only when it has higher
priority than current in servicing interrupt. With APIC-v, the priority
comparing is done by hardware and hardware will inject the interrupt to
VCPU when it recognizes an interrupt. Currently, there is no virtual
APIC-v feature available for L1 to use, so when L2 is running, we still need
to compare interrupt priority with ISR in hypervisor instead via hardware.
Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com>
Acked-by: "Dong, Eddie" <eddie.dong@intel.com>
master commit: b35d0a2698
master date: 2013-08-22 10:50:13 +0200
If interrupt is blocked by L1's TPR, L2 should not see it and keep
running. Adding the check before L2 to retrive interrupt.
Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com>
Acked-by: "Dong, Eddie" <eddie.dong@intel.com>
master commit: 7fb5c6b9ef
master date: 2013-08-22 10:49:24 +0200
... as being insecure.
Also drop the second (redundant) read DMAR_GSTS_REG from enable_intremap().
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by Xiantao Zhang <xiantao.zhang@intel.com>
master commit: c9c6abab58
master date: 2013-08-21 16:44:58 +0200
It using map_domain_page() was entirely wrong. Use __acpi_map_table()
instead for the time being, with locking added as the mappings it
produces get replaced with subsequent invocations. Using locking in
this way is acceptable here since the only two runtime callers are
acpi_os_{read,write}_memory(), which don't leave mappings pending upon
returning to their callers.
Also fix __acpi_map_table()'s first parameter's type - while benign for
unstable, backports to pre-4.3 trees will need this.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
ACPI: use ioremap() in acpi_os_map_memory()
This drops the post-boot use of __acpi_map_table() here again (together
with the somewhat awkward locking), in favor of using ioremap().
Signed-off-by: Jan Beulich <jbeulich@suse.com>
master commit: 2ee9cbf9d8
master date: 2013-08-21 08:38:40 +0200
master commit: c5ba8ed4c6
master date: 2013-08-21 08:40:22 +0200
The first (PAT6) column was wrong across the board, and the column for
PAT7 was missing altogether.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Keir Fraser <keir@xen.org>
master commit: 3829655bd3
master date: 2013-08-23 09:23:24 +0200
commit 6859874b61 ("x86/HVM: fix x2APIC
APIC_ID read emulation") introduced an error for the hvm emulation of
x2apic. Any try to write to APIC_ICR MSR will result in a GP fault.
Signed-off-by: Juergen Gross <juergen.gross@ts.fujitsu.com>
master commit: 69962e19ed
master date: 2013-08-22 11:24:00 +0200
On *BSD, stdbool.h lives in /usr/include, but we don't want to have
that on the search path in case we pick up any headers from the build
host's C libraries.
Copy the equivalent hack already in place for stdarg.h: on all
supported compilers the contents of stdbool.h are trivial, so just
supply the things we need in a xen/stdbool.h header.
Signed-off-by: Tim Deegan <tim@xen.org>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Keir Fraser <keir@xen.org>
Tested-by: Patrick Welche <prlw1@cam.ac.uk>
master commit: 7b9685ca4e
master date: 2013-08-15 22:00:45 +0100
Extracted from Yinghai Lu's Linux commit d5c78673 ("x86: Fix /proc/mtrr
with base/size more than 44bits").
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Keir Fraser <keir@xen.org>
master commit: f67af6d580
master date: 2013-08-14 11:20:26 +0200
Add a boot parameter to enable/disable the APIC-v dynamically. APIC-v is
enabled by default. User can use apicv=0 to disable it.
Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com>
master commit: 0c006b41a2
master date: 2013-08-13 17:47:16 +0200
According to AMD Programmer's Manual vol2, vmrun, vmsave and vmload
should inject #GP instead of #UD when unable to access memory
location for vmcb. Also, the code should make sure that L1 guest
EFER.SVME is not zero. Otherwise, #UD should be injected.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Reviewed-by: Tim Deegan <tim@xen.org>
master commit: 910daaf5aa
master date: 2013-08-13 14:24:16 +0200
Fix assertion in __virt_to_maddr when starting nested SVM guest
in debug mode. Investigation has shown that svm_vmsave/svm_vmload
make use of __pa() with invalid address.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Reviewed-by: Tim Deegan <tim@xen.org>
master commit: 85fc517ec3
master date: 2013-08-13 14:22:14 +0200
According to SDM, if paging mode is changed, then whole TLBs and caches will
be flushed. This is missed in nested handle logic. Also this fixed the issue
that 64 bits windows cannot boot up on top of L1 kvm.
Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com>
Acked-by: Keir Fraser <keir@xen.org>
master commit: e1ab5c77b4
master date: 2013-08-06 17:22:35 +0200
Some extra tweaks are necessary to deal with the situation of XSAVEOPT
not writing the FPU portion of the save image (due to it detecting that
the register state did not get modified since the last XRSTOR).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Tested-by: Ben Guthro <ben.guthro@gmail.com>
Acked-by: Keir Fraser <keir@xen.org>
master commit: c58d9f2f48
master date: 2013-08-05 18:42:37 +0200
Also add another pair of assertions to catch eventual further cases of
incorrect accounting.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Keir Fraser <keir@xen.org>
master commit: b0e55bd497
master date: 2013-08-05 18:40:23 +0200
domain_set_time_offset() udpates d->time_offset_seconds, but does not correct
the wallclock in the shared info, meaning that it is incorrect until the next
XENPF_settime hypercall from dom0 which resynchronises the wallclock for all
domains.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Keir Fraser <keir@xen.org>
master commit: 915a59f25c
master date: 2013-07-18 09:16:15 +0200
Its attempt to tear down intermediate page table levels may race with
map_pages_to_xen() establishing them, and now that
map_domain_page_global() is backed by vmap() this teardown is also
wasteful (as it's very likely to need the same address space populated
again within foreseeable time).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Keir Fraser <keir@xen.org>
master commit: 68caac7f6f
master date: 2013-07-17 10:21:33 +0200
Dom0 uses this hypercall to pass ACPI information to Xen. It is not very
uncommon for more cpus to be listed in the ACPI tables than are present on the
system, particularly on systems with a common BIOS for a 2 and 4 socket server
varients.
As Dom0 does not control the number of entries in the ACPI tables, and is
required to pass everything it finds to Xen, change the logging.
There is now an single unconditional warning for the first unknown ID, and
further warnings if "cpuinfo" is requested by the user on the command line.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
master commit: 85047d9e4f
master date: 2013-07-17 08:45:20 +0200
While the rule to generate .init.o files from .o ones already correctly
included $(extra-y), the setting of the necessary compiler flag didn't
have the same. With some yet to be posted patch this resulted in build
breakage because of the compiler deciding not to inline a few functions
(which then results in .text not being empty as required for these
object files).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Keir Fraser <keir@xen.org>
master commit: 5656b93d21
master date: 2013-07-10 10:03:40 +0200
While debugging the issue which turned out to be XSA-58, a printk in this loop
showed that it was quite easy to never make useful progress, because of
consistently failing the preemption check.
One single l2 entry is a reasonable amount of work to do, even if an action is
pending, and also assures forwards progress across repeat continuations.
Tweak the continuation criteria to fail on the first iteration of the loop.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Keir Fraser <keir@xen.org>
master commit: d3a55d7d9b
master date: 2013-07-04 10:33:18 +0200
The IOMMU interrupt handling in bottom half must clear the PPR log interrupt
and event log interrupt bits to re-enable the interrupt. This is done by
writing 1 to the memory mapped register to clear the bit. Due to hardware bug,
if the driver tries to clear this bit while the IOMMU hardware also setting
this bit, the conflict will result with the bit being set. If the interrupt
handling code does not make sure to clear this bit, subsequent changes in the
event/PPR logs will no longer generating interrupts, and would result if
buffer overflow. After clearing the bits, the driver must read back
the register to verify.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Adjust to apply on top of heavily modified patch 1. Adjust flow to get away
with a single readl() in each instance of the status register checks.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Tim Deegan <tim@xen.org>
Acked-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
master commit: 9eabb07354
master date: 2013-07-02 08:50:41 +0200
The IOMMU interrupt bits in the IOMMU status registers are
"read-only, and write-1-to-clear (RW1C). Therefore, the existing
logic which reads the register, set the bit, and then writing back
the values could accidentally clear certain bits if it has been set.
The correct logic would just be writing only the value which only
set the interrupt bits, and leave the rest to zeros.
This patch also, clean up #define masks as Jan has suggested.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
With iommu_interrupt_handler() properly having got switched its readl()
from status to control register, the subsequent writel() needed to be
switched too (and the RW1C comment there was bogus).
Some of the cleanup went too far - undone.
Further, with iommu_interrupt_handler() now actually disabling the
interrupt sources, they also need to get re-enabled by the tasklet once
it finished processing the respective log. This also implies re-running
the tasklet so that log entries added between reading the log and re-
enabling the interrupt will get handled in a timely manner.
Finally, guest write emulation to the status register needs to be done
with the RW1C (and RO for all other bits) semantics in mind too.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Tim Deegan <tim@xen.org>
Acked-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
master commit: 2823a0c7df
master date: 2013-07-02 08:49:43 +0200
This mostly reverts commit eb60be3d ("x86: don't pass negative time to
gtime_to_gtsc()") and instead corrects __update_vcpu_system_time()'s
handling of this_cpu(cpu_time).stime_local_stamp dating back before the
start of a HVM guest (which would otherwise lead to a negative value
getting passed to gtime_to_gtsc(), causing scale_delta() to produce
meaningless output).
Flushing the value to zero was wrong, and printing a message for
something that can validly happen wasn't very useful either.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Keir Fraser <keir@xen.org>
master commit: 5ad914bc86
master date: 2013-07-02 08:48:03 +0200
This in effect copies similar logic from xend: While there's no way to
check whether a device is assigned to a particular guest,
XEN_DOMCTL_test_assign_device at least allows checking whether an
IOMMU is there and whether a device has been assign to _some_
guest.
For the time being, this should be enough to cover for the missing
error checking/recovery in other parts of libxl's device assignment
paths.
There remains a (functionality-, but not security-related) race in
that the iommu should be set up earlier, but this is too risky a
change for this stage of the 4.3 release.
This is a security issue, XSA-61.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Tested-by: George Dunlap <george.dunlap@eu.citrix.com>
Acked-by: George Dunlap <george.dunlap@eu.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
If the DTB is loading right after the kernel, on some setup, Linux will
overwrite the DTB during the decompression step.
To be sure the DTB won't be overwritten by the decompression stage, load
the DTB near the end of the first memory bank and below 4Gib (if memory range is
greater).
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
When GICD_ICENABLERn is read, all the 1s bit represent enabled IRQs.
Currently gic_shutdown_irq:
- read GICD_ICENABLER
- set the corresping bit to 1
- write back the new value
That means, Xen will disable more IRQs than necessary.
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Andrew Cooper
Xi Xiong
Steven Noonan
Jan Beulich
Tomasz Wroblewski
Ian Campbell
John Liu
Yang Zhang
Juergen Gross
Tim Deegan
Suravee Suthikulpanit
Patrick Welche
George Dunlap
Ian Jackson
Julien Grall