apt-get update refreshes the package lists. -y doesn't do anything
here. It is needed for "apt-get install" or "apt-get upgrade" but not
for apt-get update. Drop it.
Signed-off-by: Javi Merino <javi.merino@cloud.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
The existing startup code employs various ad-hoc state tracking about certain
boot module types by each area of the code. A boot module flags bitfield is
added to enable tracking these different states. The first state to be
transition by this commit is module relocation.
Signed-off-by: Daniel P. Smith <dpsmith@apertussolutions.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
With all boot modules now labeled by type, it is no longer necessary to
track whether a boot module was identified via the module_map bitmap.
Introduce a set of helpers to search the list of boot modules based on type and
the reference type, pointer or array index, desired. Then drop all uses of
setting a bit in module_map and replace its use for looping with the helpers.
Signed-off-by: Daniel P. Smith <dpsmith@apertussolutions.com>
This commit introduces module types for the types of boot modules that may be
passed to Xen. These include xen, kernel, ramdisk, microcode, and xsm policy.
This reduces the need for hard coded order assumptions and global variables to
be used by consumers of boot modules, such as domain construction.
Signed-off-by: Daniel P. Smith <dpsmith@apertussolutions.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
The data pointer is known good, so the -ENOMEM path is unnecessary. However,
if we find no patch, something's wrong seeing as early_microcode_init()
indicated it was happy.
We are the entity initialising the cache, so we don't need the complexity of
using microcode_update_cache(). Just assert the cache is empty, and populate
it.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Daniel P. Smith <dpsmith@apertussolutions.com>
Both are used to pass information from early_microcode_load() to
microcode_init_cache(), and both constitute use-after-free's in certain cases.
Later still in microcode_init() is a failed attempt to "free" this
information, long after the damage has been done.
* ucode_mod is a copy of the module_t identified by `ucode=$n`. It is a copy
of the physical pointer from prior to Xen relocating the modules.
microcode_init_cache() might happen to find the data still intact in it's
old location, but it might be an arbitrary part of some other module.
* ucode_blob is a stashed virtual pointer to a bootstrap_map() which becomes
invalid the moment control returns to __start_xen(), where other logic is
free to to make temporary mappings. This was even noticed and
microcode_init_cache() adjusted to "fix" the stashed pointers.
The information which should be passed between these two functions is which
module to look in. Introduce early_mod_idx for this purpose. opt_scan can be
reused to distinguish between CPIO archives and raw containers.
Notably this means microcode_init_cache() doesn't need to scan all modules any
more; we know exactly which one to look in. However, we do re-parse the CPIO
header for simplicity.
Furthermore, microcode_init_cache(), being a presmp_initcall does not need to
use bootstrap_map() to access modules; it can use mfn_to_virt() directly,
which avoids needing to funnel exit paths through bootstrap_unmap().
Fold microcode_scan_module() into what is now it's single caller. It operates
on the function-wide idx/data/size state which allows for a unified "found"
path irrespective of module selection method.
Delete microcode_init() entirely. It was never legitimate logic.
This resolves all issues to do with holding pointers (physical or virtual)
across returning to __start_xen().
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Daniel P. Smith <dpsmith@apertussolutions.com>
If bootstrap_map() has provided a mapping, we must free it when done. Failing
to do so may cause a spurious failure for unrelated logic later.
Inserting a bootstrap_unmap() here does not break the use of ucode_{blob,mod}
any more than they already are.
Add a printk noting when we didn't find a microcode patch. It's at debug
level, because this is the expected case on AMD Client systems, and SDPs, but
for people trying to figure out why microcode loading isn't work, it might be
helpful.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Daniel P. Smith <dpsmith@apertussolutions.com>
The work to add the `ucode=nmi` cmdline option left a subtle corner case.
Both scan and an explicit index could be chosen, and we could really find both
a CPIO archive and a microcode file.
Worse, because the if/else chains for processing ucode_{blob,mod} are opposite
ways around in early_microcode_load() and microcode_init_cache(), we can
genuinely perform early microcode loading from the CPIO archive, then cache
from the explicit file.
Therefore, enforce that only one selection method can be active.
Rename ucode_{scan,mod_idx} to have an opt_ prefix. This is both for
consistency with the rest of Xen, and to guarantee that we've got all
instances of the variables covered in this change. Explain how they're use.
During cmdline/config parsing, always update both variables in pairs.
In early_microcode_load(), ASSERT() the invariant just in case. Use a local
variable for idx rather than operating on the static; we're the only consume
of the value.
Expand the index selection logic with comments and warnings to the user when
something went wrong.
Fixes: 5ed12565aa ("microcode: rendezvous CPUs in NMI handler and load ucode")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Daniel P. Smith <dpsmith@apertussolutions.com>
Currently, building with LLVM's LLD fails:
ld -melf_i386_fbsd --orphan-handling=error -N -T ...
ld: error: <internal>:(.symtab) is being placed in '.symtab'
ld: error: <internal>:(.shstrtab) is being placed in '.shstrtab'
ld: error: <internal>:(.strtab) is being placed in '.strtab'
gmake[11]: *** [arch/x86/boot/Makefile:69: arch/x86/boot/built-in-32.base.bin] Error 1
This is a consequence of --orphan-handling, and it appears that Binutils
doesn't diagnose some orphaned sections even explicitly asked to do so.
List the sections explicitly.
Fixes: aa9045e771 ('x86/boot: Rework how 32bit C is linked/included for early boot')
Signed-off-by: Frediano Ziglio <frediano.ziglio@cloud.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
combine_two_binaries.py only understands GNU LD's format, and does
not work with LLVM's LLD.
Use nm command instead to get list of symbols; specifically
BSD format as it does not truncate symbols names like sysv one.
Fixes: aa9045e771 ('x86/boot: Rework how 32bit C is linked/included for early boot')
Signed-off-by: Frediano Ziglio <frediano.ziglio@cloud.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
The "base" and "offset" definition were inverted, "base" file should be the
files without offsets applied while "offset" should have the offsets applied.
Also update an old usage of "final" to "apply offset" to make more clear and
consistent (in former commit messages the "final" term was used instead of
"offset").
Fixes: aa9045e771 ('x86/boot: Rework how 32bit C is linked/included for early boot')
Signed-off-by: Frediano Ziglio <frediano.ziglio@cloud.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
We've got a perfectly good vendor abstraction already for microcode. No need
for a second ad-hoc one in microcode_scan_module().
This is in preparation to use ucode_ops.cpio_path in multiple places.
These paths are only used during __init, so take the opportunity to move them
into __initconst.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Daniel P. Smith <dpsmith@apertussolutions.com>
Diff-wise, as early_microcode_update_cpu() is the larger function, this more
closely resembles "merge early_microcode_load() into it's single callee", but
the end result is the same.
At the same time, rename the len variable to size. This is for better
consistency with existing logic, and to reduce churn later.
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Daniel P. Smith <dpsmith@apertussolutions.com>
microcode_grab_module() and early_microcode_update_cpu() are logically one
task that passes state via static variables.
We intend to delete said static variables; start by breaking these functions
out of early_microcode_init().
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Daniel P. Smith <dpsmith@apertussolutions.com>
There's no need for microcode_init_cache() to be called exactly where it is in
__start_xen(). All that matters is it must be after xmalloc() is available
and before APs start up.
As a consequence, microcode_init_cache() runs a little later on boot now.
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Daniel P. Smith <dpsmith@apertussolutions.com>
Clang 19 complains with the following error when building libxl:
libxl_utils.c:48:15: error: variable length array folded to constant array as an extension [-Werror,-Wgnu-folding-constant]
48 | char path[strlen("/local/domain") + 12];
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
Replace the usage of strlen() with sizeof, which allows the literal
string length to be known at build time. Note sizeof accounts for the
NUL terminator while strlen() didn't, hence subtract 1 from the total
size calculation.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Frediano Ziglio <frediano.ziglio@cloud.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Anthony PERARD <anthony.perard@vates.tech>
When using AMD-Vi interrupt remapping the vector field in the IO-APIC RTE is
repurposed to contain part of the offset into the remapping table. Previous to
2ca9fbd739 Xen had logic so that the offset into the interrupt remapping
table would match the vector. Such logic was mandatory for end of interrupt to
work, since the vector field (even when not containing a vector) is used by the
IO-APIC to find for which pin the EOI must be performed.
A simple solution wold be to read the IO-APIC RTE each time an EOI is to be
performed, so the raw value of the vector field can be obtained. However
that's likely to perform poorly. Instead introduce a cache to store the
EOI handles when using interrupt remapping, so that the IO-APIC driver can
translate pins into EOI handles without having to read the IO-APIC RTE entry.
Note that to simplify the logic such cache is used unconditionally when
interrupt remapping is enabled, even if strictly it would only be required
for AMD-Vi.
Reported-by: Willi Junga <xenproject@ymy.be>
Suggested-by: David Woodhouse <dwmw@amazon.co.uk>
Fixes: 2ca9fbd739 ('AMD IOMMU: allocate IRTE entries instead of using a static mapping')
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
On Armv8-A, Xen has a fixed virtual start address (link address too) for all
Armv8-A platforms. In an MMU based system, Xen can map its loaded address to
this virtual start address. So, on Armv8-A platforms, the Xen start address does
not need to be configurable. But on Armv8-R platforms, there is no MMU to map
loaded address to a fixed virtual address and different platforms will have very
different address space layout. So Xen cannot use a fixed physical address on
MPU based system and need to have it configurable.
So, we introduce a Kconfig option for users to set the start address. The start
address needs to be aligned to 4KB. We have a check for this alignment.
MPU allows us to define regions which are 64 bits aligned. This restriction
comes from the bitfields of PRBAR, PRLAR (the lower 6 bits are 0 extended to
provide the base and limit address of a region). This means that the start
address of Xen needs to be at least 64 bits aligned (as it will correspond to
the start address of memory protection region).
As for now Xen on MPU tries to use the same memory alignment restrictions as it
has been for MMU. We have added a build assertion to ensure that the page size
is 4KB. Unlike MMU where the starting virtual address is 2MB, Xen on MPU needs
the start address to be 4KB (ie page size) aligned.
In case if the user forgets to set the start address, then 0xffffffff is used
as default. This is to trigger the error (on alignment check) and thereby prompt
user to set the start address.
Also updated config.h so that it includes mpu/layout.h when CONFIG_MPU is
defined.
Signed-off-by: Wei Chen <wei.chen@arm.com>
Signed-off-by: Jiamei.Xie <jiamei.xie@arm.com>
Signed-off-by: Ayan Kumar Halder <ayan.kumar.halder@amd.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Luca Fancellu <luca.fancellu@arm.com>
There are features in the forthcoming patches which are dependent on
MPU. For eg fixed start address.
Also, some of the Xen features (eg STATIC_MEMORY) will be selected
by the MPU configuration.
Thus, this patch introduces a choice between MMU and MPU for the type
of memory management system. By default, MMU is selected.
MPU is now gated by UNSUPPORTED.
Update SUPPORT.md to state that the support for MPU is experimental.
Also updated CHANGELOG.md as well.
Signed-off-by: Ayan Kumar Halder <ayan.kumar.halder@amd.com>
Reviewed-by: Luca Fancellu <luca.fancellu@arm.com>
Acked-by: Julien Grall <jgrall@amazon.com>
Acked-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
If the BSS section is empty, then the function should return.
If one does not check whether the BSS section is empty or not, then there is a
risk of writing 0s outside of BSS section (which may contain critical data).
Fixes: dac84b66cc ("xen: arm64: initial build + config changes, start of day code")
Signed-off-by: Ayan Kumar Halder <ayan.kumar.halder@amd.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Luca Fancellu <luca.fancellu@arm.com>
Recent patches to xen-devel indicate active interest in Argo within the Xen
community, and as the feature has been documented and in use by
OpenXT for multiple years, update the Xen SUPPORT.md statement of status.
This has also been discussed at several XenSummits, with general agreement to
the status upgrade.
Signed-off-by: Christopher Clark <christopher.w.clark@gmail.com>
Acked-by: Julien Grall <jgrall@amazon.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
A recent cppcheck run was found to fail:
https://gitlab.com/xen-project/people/andyhhp/xen/-/jobs/8237167472
with:
"type mismatch! call is<type>() before get<type>()" && is<std::string>()
make[3]: *** [arch/x86/boot/Makefile:28: arch/x86/boot/reloc-trampoline.32.o] Error 1
This turns out to be a parallel build issue, combined with a recent change to
x86. Notably, we now have a case where we build both:
CC arch/x86/boot/reloc-trampoline.32.o
CC arch/x86/boot/reloc-trampoline.o
from the same original C file, and cppcheck uses the source C file as the key
for generating it's intermediate files.
Switch cppcheck to use the object file as the unique key instead.
Fixes: 45bfff6511 ("xen/misra: xen-analysis.py: fix parallel analysis Cppcheck errors")
Fixes: db8acf31f9 ("x86/boot: Reuse code to relocate trampoline")
Suggested-by: Luca Fancellu <luca.fancellu@arm.com>
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Luca Fancellu <luca.fancellu@arm.com>
Tested-by: Luca Fancellu <luca.fancellu@arm.com>
While it does work with branches, it breaks working with full SHAs.
This reverts commit c554ec124b.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
The current logic in modify_xen_mappings() allows for fully empty L2 tables to
not be freed and unhooked from the parent L3 if the last L2 slot is not
populated.
Ensure that even when an L2 slot is empty the logic to check whether the whole
L2 can be removed is not skipped.
Fixes: 4376c05c31 ('x86-64: use 1GB pages in 1:1 mapping if available')
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Dom0 normally informs Xen of PCI device removal via
PHYSDEVOP_pci_device_remove, e.g. in response to SR-IOV disable or
hot-unplug. We might find ourselves with stale pdevs if a buggy dom0
fails to report removal via PHYSDEVOP_pci_device_remove. In this case,
attempts to access the config space of the stale pdevs would be invalid
and return all 1s.
Some possible conditions leading to this are:
1. Dom0 disables SR-IOV without reporting VF removal to Xen.
The Linux SR-IOV subsystem normally reports VF removal when a PF driver
disables SR-IOV. In case of a buggy dom0 SR-IOV subsystem, SR-IOV could
become disabled with stale dangling VF pdevs in both dom0 Linux and Xen.
2. Dom0 reporting PF removal without reporting VF removal.
During SR-IOV PF removal (hot-unplug), a buggy PF driver may fail to
disable SR-IOV, thus failing to remove the VFs, leaving stale dangling
VFs behind in both Xen and Linux. At least Linux warns in this case:
[ 100.000000] 0000:01:00.0: driver left SR-IOV enabled after remove
In either case, Xen is left with stale VF pdevs, risking invalid PCI
config space accesses.
When Xen is built with CONFIG_DEBUG=y, the following Xen crashes were
observed when dom0 attempted to access the config space of a stale VF:
(XEN) Assertion 'pos' failed at arch/x86/msi.c:1274
(XEN) ----[ Xen-4.20-unstable x86_64 debug=y Tainted: C ]----
...
(XEN) Xen call trace:
(XEN) [<ffff82d040346834>] R pci_msi_conf_write_intercept+0xa2/0x1de
(XEN) [<ffff82d04035d6b4>] F pci_conf_write_intercept+0x68/0x78
(XEN) [<ffff82d0403264e5>] F arch/x86/pv/emul-priv-op.c#pci_cfg_ok+0xa0/0x114
(XEN) [<ffff82d04032660e>] F arch/x86/pv/emul-priv-op.c#guest_io_write+0xb5/0x1c8
(XEN) [<ffff82d0403267bb>] F arch/x86/pv/emul-priv-op.c#write_io+0x9a/0xe0
(XEN) [<ffff82d04037c77a>] F x86_emulate+0x100e5/0x25f1e
(XEN) [<ffff82d0403941a8>] F x86_emulate_wrapper+0x29/0x64
(XEN) [<ffff82d04032802b>] F pv_emulate_privileged_op+0x12e/0x217
(XEN) [<ffff82d040369f12>] F do_general_protection+0xc2/0x1b8
(XEN) [<ffff82d040201aa7>] F x86_64/entry.S#handle_exception_saved+0x2b/0x8c
(XEN) Assertion 'pos' failed at arch/x86/msi.c:1246
(XEN) ----[ Xen-4.20-unstable x86_64 debug=y Tainted: C ]----
...
(XEN) Xen call trace:
(XEN) [<ffff82d040346b0a>] R pci_reset_msix_state+0x47/0x50
(XEN) [<ffff82d040287eec>] F pdev_msix_assign+0x19/0x35
(XEN) [<ffff82d040286184>] F drivers/passthrough/pci.c#assign_device+0x181/0x471
(XEN) [<ffff82d040287c36>] F iommu_do_pci_domctl+0x248/0x2ec
(XEN) [<ffff82d040284e1f>] F iommu_do_domctl+0x26/0x44
(XEN) [<ffff82d0402483b8>] F do_domctl+0x8c1/0x1660
(XEN) [<ffff82d04032977e>] F pv_hypercall+0x5ce/0x6af
(XEN) [<ffff82d0402012d3>] F lstar_enter+0x143/0x150
These ASSERTs triggered because the MSI-X capability position can't be
found for a stale pdev.
Latch the capability positions of MSI and MSI-X during device init, and
replace instances of pci_find_cap_offset(..., PCI_CAP_ID_MSI{,X}) with
the stored value. Introduce one additional ASSERT, while the two
existing ASSERTs in question continue to work as intended, even with a
stale pdev.
Fixes: 484d7c852e ("x86/MSI-X: track host and guest mask-all requests separately")
Fixes: 575e18d54d ("pci: clear {host/guest}_maskall field on assign")
Signed-off-by: Stewart Hildebrand <stewart.hildebrand@amd.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
In {big,little}_endian.h the changes are entirely mechanical, except for
dealing with casting away of const from pointers-to-const on lines
touched anyway.
In swab.h the casting of constants is done away with as well - I simply
don't see what the respective comment is concerned about in our
environment (sizeof(int) >= 4, sizeof(long) >= {4,8} depending on
architecture, sizeof(long long) >= 8). The comment is certainly relevant
in more general cases. Excess parentheses are dropped as well,
___swab64()'s local variable is renamed, and __arch__swab64()'s is
dropped as being redundant with ___swab64()'s.
Excessive casts compared to ___{,constant_}swab{16,32}() are also
dropped. Much like excessive ones in __fswab64().
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Frediano Ziglio <frediano.ziglio@cloud.com>
... and move the type itself to linux-compat.h.
While doing so drop casts (instead of modiyfing them) from x86'es
wrmsrl().
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Frediano Ziglio <frediano.ziglio@cloud.com>
For quite a while we didn't need to be concerned of 32-bit code
generation anymore: Simply use the 64-bit form of BSWAP here.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Frediano Ziglio <frediano.ziglio@cloud.com>
In {big,little}_endian.h the changes are entirely mechanical, except for
dealing with casting away of const from pointers-to-const on lines
touched anyway.
In swab.h the casting of constants is done away with as well - I simply
don't see what the respective comment is concerned about in our
environment (sizeof(int) >= 4, sizeof(long) >= {4,8} depending on
architecture, sizeof(long long) >= 8). The comment is certainly relevant
in more general cases. Excess parentheses are dropped as well,
___swab32()'s local variable is renamed, and __arch__swab32()'s is
dropped as being redundant with ___swab32()'s.
The masking operation is also dropped from __fswab64().
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Frediano Ziglio <frediano.ziglio@cloud.com>
In {big,little}_endian.h the changes are entirely mechanical, except for
dealing with casting away of const from pointers-to-const on lines
touched anyway.
In swab.h the casting of constants is done away with as well - I simply
don't see what the respective comment is concerned about in our
environment (sizeof(int) >= 4, sizeof(long) >= {4,8} depending on
architecture, sizeof(long long) >= 8). The comment is certainly relevant
in more general cases. Excess parentheses are dropped as well,
___swab16()'s local variable is renamed, and __arch__swab16()'s is
dropped as being redundant with ___swab16()'s.
With that no uses of the type remain, so it moves to linux-compat.h.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Frediano Ziglio <frediano.ziglio@cloud.com>
Xen uses master for QEMU_UPSTREAM_REVISION, and has done for other trees too
in the path. Apparently we've never specified a different branch, because the
git-clone rune only pulls in the master branch; it does not pull in diverging
branches. Fix this by stating which branch/tag is wanted.
$TAG is really a committish, and git-clone's -b/--branch takes a committish
too.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
We already have one migration case opencoded (feat.max_subleaf). A more
recent discovery is that we advertise x2APIC to guests without ensuring that
we provide max_leaf >= 0xb.
In general, any leaf known to Xen can be safely configured by the toolstack if
it doesn't violate other constraints.
Therefore, introduce guest_common_{max,default}_leaves() to generalise the
special case we currently have for feat.max_subleaf, in preparation to be able
to provide x2APIC topology in leaf 0xb even on older hardware.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Alejandro Vallejo <alejandro.vallejo@cloud.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Add Rule 11.2 and Rule 18.1 to the monitored set.
Tag Rule 7.3 as clean.
Tag Rule 11.2 and Rule 20.7 as clean only for arm.
Rule 2.2, Rule 9.5 and Directive 4.12 are not accepted: do not enable
them and do not tag them as clean. Same for D4.3.
Signed-off-by: Federico Serafini <federico.serafini@bugseng.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Add x86_64 hardware test that creates a Xen Argo communication
connection between two PVH domains. In the test, dom0 creates a domU and
listens for messages sent by the domU through Argo.
To accomplish this, build Xen with CONFIG_ARGO=y and create a CI test job.
Update the xilinx x86_64 test script to support the new test, and add
"sync_console" to command line to avoid an issue with console messages
being lost.
Requested-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Victor Lira <victorm.lira@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Move code from efi-boot.h to a separate, new, reloc-trampoline.c file.
Reuse this new code, compiling it for 32bit as well, to replace assembly
code in head.S doing the same thing.
Signed-off-by: Frediano Ziglio <frediano.ziglio@cloud.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Right now, the two functions which were really too complicated to write
in asm are compiled as 32bit PIC, linked to a blob and included
directly, using global asm() to arrange for them to have function semantics.
This is limiting and fragile; the use of data relocations will compile
fine but malfunction when used, creating hard-to-debug bugs.
Furthermore, we would like to increase the amount of C, to
deduplicate/unify Xen's boot logic, as well as making it easier to
follow. Therefore, rework how the 32bit objects are included.
Link all 32bit objects together first. This allows for sharing of logic
between translation units. Use differential linking and explicit
imports/exports to confirm that we only have the expected relocations,
and write the object back out as an assembly file so it can be linked
again as if it were 64bit, to integrate with the rest of Xen.
This allows for the use of external references (e.g. access to global
variables) with reasonable assurance of doing so safely.
No functional change.
Signed-off-by: Frediano Ziglio <frediano.ziglio@cloud.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
discard_initial_images() only works because init_domheap_pages() with ps==pe
is a no-op.
In dom0_construct(), explaining the significance of setting the initrd length
to 0, and put an explicit check in discard_initial_images().
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Daniel P. Smith <dpsmith@apertussolutions.com>
We can't drop them fully yet, but we can limit their scope to almost nothing,
which serves the same purpose.
This removes the ability to accidentally reintroduce buggy uses of
__va(mbi->mods_addr).
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Daniel P. Smith <dpsmith@apertussolutions.com>
The former is about to disappear.
In some cases, introduce a local struct boot_module pointer. Judgement on
where to do this, and on constness, is based on what creates least churn
overall.
No functional change.
Signed-off-by: Daniel P. Smith <dpsmith@apertussolutions.com>
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Daniel P. Smith <dpsmith@apertussolutions.com>
Javi Merino
Daniel P. Smith
Andrew Cooper
Frediano Ziglio
Roger Pau Monne
Wei Chen
Ayan Kumar Halder
Christopher Clark
Stewart Hildebrand
Jan Beulich
Federico Serafini
Victor Lira