Instead of relying on cpuid instruction behaviour to tell which domain
type we are just try asking the kernel via the appropriate sysfs node
(added in Linux kernel 4.13).
Keep the old detection logic as a fallback for older kernels.
Signed-off-by: Juergen Gross <jgross@suse.com>
Add support for filtering out the write_ctrlreg monitor events if they
are generated only by changing certains bits.
A new parameter (bitmask) was added to the xc_monitor_write_ctrlreg
function in order to mask the event generation if the changed bits are
set.
Signed-off-by: Petre Pircalabu <ppircalabu@bitdefender.com>
Acked-by: Tamas K Lengyel <tamas@tklengyel.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
After rombios transfers the data for a write, it checks the status and
fails if BSY is set. qemu-trad doesn't set BSY for PIO writes, but QEMU
upstream does, and this causes rombios to fail writes because they are
marked as BSY. Instead, wait for BSY to clear after a write.
INT 13 writes are probably rarely used these days, but they are used by
GRUB 2 to write to its environment file which happens by default on
Ubuntu.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
GCC 7.1.1 complains that several buffers passed to snprintf() in xenpmd
and tools/ocmal/xc are too small to hold the largest possible resulting string,
which is calculated by adding up the maximum length of all the substrings.
The warnings are treated as errors by -Werror, and goes like this (abbreviated):
xenpmd.c:94:36: error: ‘%s’ directive output may be truncated writing up to
255 bytes into a region of size 13 [-Werror=format-truncation=]
#define BATTERY_INFO_FILE_PATH "/proc/acpi/battery/%s/info"
^
xenpmd.c:113:13: note: ‘snprintf’ output between 25 and 280 bytes into a
destination of size 32
xenpmd.c:95:37: error: ‘%s’ directive output may be truncated writing up to
255 bytes into a region of size 13 [-Werror=format-truncation=]
#define BATTERY_STATE_FILE_PATH "/proc/acpi/battery/%s/state"
^
xenpmd.c:116:13: note: ‘snprintf’ output between 26 and 281 bytes into a
destination of size 32
xenctrl_stubs.c:65:15: error: ‘%s’ directive output may be truncated writing
up to 1023 bytes into a region of size 252 [-Werror=format-truncation=]
"%d: %s: %s", error->code,
^~
xenctrl_stubs.c:64:4: note: ‘snprintf’ output 5 or more bytes (assuming 1028)
into a destination of size 256
Enlarge the size of these buffers as suggested by the complier
(and slightly rounded) to fix the warnings.
No functional changes.
Signed-off-by: Zhongze Liu <blackskygg@gmail.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Have the caller indicate its buffer size, provide a means to query the
needed size, don't ignore the upper halves of type code and instance,
and don't copy partial data.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
This fixes the python bindings, since symbols were missing in libxenstat.
xentop doesn't use any yajl functions, so drop linking libyajl.
Signed-off-by: Peter Große <pegro@friiks.de>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Avoid needless gaps. Make flags field mandatory for all three
operations (and rename it to fit the intended future purpose of
possibly holding more than just one flag).
Also correct a typo in a related domctl.h comment.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Julien Grall <julien.grall@arm.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
iptables has a system-wide lock on the xtables. Strangely though, in
the case of two concurrent invocations, the default is for the
instance not grabbing the lock to exit out rather than waiting for it.
This means that when starting a large number of guests in parallel,
many will fail out with messages like this:
2017-05-10 11:45:40 UTC libxl: error: libxl_exec.c:118: libxl_report_child_exitstatus: /etc/xen/scripts/vif-bridge remove [18767] exited with error status 4
2017-05-10 11:50:52 UTC libxl: error: libxl_exec.c:118: libxl_report_child_exitstatus: /etc/xen/scripts/vif-bridge offline [1554] exited with error status 4
In order to instruct iptables to wait for the lock, you have to
specify '-w'. Unfortunately, not all versions of iptables have the
'-w' option, so on first invocation check to see if it accepts the -w
command.
Reported-by: Antony Saba <awsaba@gmail.com>
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Release-acked-by: Julien Grall <julien.grall@arm.com>
xc_{get,set}_hvm_param() are deprecated because they truncate their value
parameter in 32bit builds of libxc, and are therefore unfit for use.
As there is only a single remaining user, switch that user over to
xc_hvm_param_get() and drop these functions completely.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Config.mk
MINIOS_UPSTREAM_REVISION } changed from tag to equivalent
QEMU_TRADITIONAL_REVISION } specific commit hash
QEMU_UPSTREAM_REVISION now tracking master again
README, xen/Makefile
Update version number
*/configure
Reran autoconf; only change is version number
tools/Rules.mk, xen/Kconfig.debug
Enable debug.
Reverts 229ff3125b "Use non-debug build for Xen 4.9".
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
The condition: if there is a space in the ring then wait for the producer
to fill the ring also evaluates to true even if the ring if full. It
leads to a deadlock where producer is waiting for consumer
to consume the items and consumer is waiting for producer to fill the ring.
Fix for the issue: check if the ring is full and then break from
the loop to consume the items from the ring.
eg. case: prod = 1272, cons = 248.
Signed-off-by: Anshul Makkar <anshul.makkar@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Release-acked-by: Julien Grall <julien.grall@arm.com>
First of all limit the memory range used for testing to 4Mb: There's no
point placing page tables right above 8Mb when they can equally well
live at the bottom of the chunk at 4Mb - rep_io_test() cares about the
5Mb...7Mb range only anyway. In a subsequent patch this will then also
allow simply looking for an unused 4Mb range (instead of using a build
time determined one).
Extend the "skip tests" condition beyond the "is there enough memory"
question.
Reported-by: Charles Arnold <carnold@suse.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Tested-by: Gary Lin <glin@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Release-acked-by: Julien Grall <julien.grall@arm.com>
Current code in backend_watch_callback has two issues when manipulating the
dguest list:
1. backend_watch_callback forgets to remove a libxl__ddomain_guest from the
list of tracked domains when the related data is freed, causing dereferences
later on when the list is traversed. Make sure that a domain is always removed
from the list when freed.
2. A spurious device state change can cause a dguest to be freed, with active
devices and without being removed from the list. Fix this by always checking if
a dguest has active devices before freeing and removing it.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reported-by: Reinis Martinsons <admin@frp.lv>
Suggested-by: Ian Jackson <ian.jackson@eu.citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Release-acked-by: Julien Grall <julien.grall@arm.com>
Current code can free the libxl__device inside of the libxl__ddomain_device
before the addition has finished if a removal happens while an addition is
still in process:
backend_watch_callback
|
v
add_device
| backend_watch_callback
(async operation) |
| v
| remove_device
| |
| V
| device_complete
| (free libxl__device)
v
device_complete
(deref libxl__device)
Fix this by creating a temporary copy of the libxl__device, that's tracked by
the GC of the nested async operation. This ensures that the libxl__device used
by the async operations cannot be freed while being used.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reported-by: Ian Jackson <ian.jackson@eu.citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Release-acked-by: Julien Grall <julien.grall@arm.com>
Build can fail if stubdom build is run before tools build because:
1. tools/include build uses relative path and depends on XEN_OS
2. stubdom needs tools/include to be built, at which time XEN_OS is
mini-os and corresponding symlinks are created
3. libraries inside tools needs tools/include to be built, at which
time XEN_OS is the host os name, but symlinks won't be created
because they are already there
4. libraries get the wrong headers and fail to build
Since both tools and stubdom build need the public headers, we build
tools/include before stubdom and tools. Remove runes in stubdom and
tools to avoid building tools/include more than once.
Provide a new dist target for tools/include. Hook up the install,
clean, dist and distclean targets for tools/include.
The new arrangement ensures tools build gets the correct headers
because XEN_OS is set to host os when building tools/include. As for
stubdom, it explicitly links to the mini-os directory without relying
on XEN_OS so it should be fine.
Reported-by: Steven Haigh <netwiz@crc.id.au>
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Tested-by: Steven Haigh <netwiz@crc.id.au>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Release-acked-by: Julien Grall <julien.grall@arm.com>
Acked-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Initialise *size in default branch to prevent certain compilers (i.e.
Linaro GCC 5.2-2015.11-2) from reporting "variable may be used uninitialized"
errors in caller function.
Signed-off-by: Julien Grall <julien.grall@arm.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Release-acked-by: Julien Grall <julien.grall@arm.com>
blktap2 is optional, so there should be no pkg-config file requiring
xenblktapctl if it isn't enabled for the build.
Add a filter mechanism to tools/Rules.mk to filter out optional
libraries.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Release-acked-by: Julien Grall <julien.grall@arm.com>
The Requires line in this config file uses the wrong names for two dependencies.
The package config file for xenctrl is called 'xencontrol' and for blktapctl is
called 'xenblktapctl'. Running a command like 'pkg-config --exists xenlight' will
fail without this fix.
Signed-off-by: Charles Arnold <carnold@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Release-acked-by: Julien Grall <julien.grall@arm.com>
Currently usbdevice_list is only checked for nullity. But the OCaml
binding will convert empty list to a pointer to NULL, instead of a
NULL pointer. That means the OCaml binding will fail to disable USB.
This patch will check emptiness of usbdevice_list. And NULL is still a
valid empty list.
Signed-off-by: Robin Lee <robinlee.sysu@gmail.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Release-acked-by: Julien Grall <julien.grall@arm.com>
This new lib devicemodel call allows multiple extents of pages to be
marked as modified in a single call. This is something needed for a
usecase I'm working on.
The xen side of the modified_memory call has been modified to accept
an array of extents. The devicemodel library either provides an array
of length 1, to support the original library function, or a second
function allows an array to be provided.
Signed-off-by: Jennifer Herbert <Jennifer.Herbert@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Release-acked-by: Julien Grall <julien.grall@arm.com>
Commit b988e88cc0 ("x86/emul: Add feature check for clzero") added a
feature check to the emulator, which breaks the harness without this
flag being forced to true.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Release-acked-by: Julien Grall <julien.grall@arm.com>
User can set max freq to specific cpu by
"xenpm set-scaling-maxfreq [cpuid] <HZ>"
or set max freq to all cpu with default cpuid by
"xenpm set-scaling-maxfreq <HZ>".
Set max freq with default cpuid will cause
segmentation fault after commit id d4906b5d05.
This patch will fix this issue and add ability
to set max freq with default cpuid.
Signed-off-by: Luwei Kang <luwei.kang@intel.com>
Compile-tested-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Release-acked-by: Julien Grall <julien.grall@arm.com>
Only attempt to restore from saved state if it exists.
Without this, oxenstored immediately exits with an exception if the
--restart option is provided but the state file is not present.
(The time-of-check to time-of-use race isn't a concern as oxenstored is
the only thing that should write the state file.)
Signed-off-by: Jonathan Davies <jonathan.davies@citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Christian Lindig <christian.lindig@citrix.com>
Release-acked-by: Julien Grall <julien.grall@arm.com>
Previously, Domain.dump output the number of the local port
corresponding to each domain's event-channel. However, when oxenstored
exits, it closes /dev/xen/evtchn which causes the kernel to close the
local port (evtchn_release), so this port is no longer useful.
Instead, store the remote port. This can be used to reconnect the
event-channel by binding the original remote port to a fresh local port.
Indeed, the logic for parsing the stored state already expects a remote
port as it passes the parsed port number to Domain.make (via
Domains.create), which takes a remote port.
Signed-off-by: Jonathan Davies <jonathan.davies@citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Christian Lindig <christian.lindig@citrix.com>
Release-acked-by: Julien Grall <julien.grall@arm.com>
Internally, paths are represented as lists of strings, where
* path "/" is represented by []
* path "/local/domain/0" is represented by ["local"; "domain"; "0"]
(see comment for Store.Path.t).
However, the traversal function generated paths like
[""; "local"; "domain"; "0"]
because the name of the root node is "". Change it to generate paths
correctly.
Furthermore, the function passed to Store.dump_fct would render the node
"foo" under the path [] as "//foo". Change this to return "/foo".
Signed-off-by: Jonathan Davies <jonathan.davies@citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Christian Lindig <christian.lindig@citrix.com>
Release-acked-by: Julien Grall <julien.grall@arm.com>
Including whether we actually tried stealing a vCPU from
a given pCPU, or we skipped that one, because of lock
contention.
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: George Dunlap <george.dunlap@citrix.com>
A new device model wrapper is added for the newly introduced
DMOP - XEN_DMOP_map_mem_type_to_ioreq_server.
Since currently this DMOP only supports the emulation of write
operations, attempts to trigger the DMOP with values other than
XEN_DMOP_IOREQ_MEM_ACCESS_WRITE or 0(to unmap the ioreq server)
shall fail. The wrapper shall be updated once read operations
are also to be emulated in the future.
Also note currently this DMOP only supports one memory type,
and can be extended in the future to map multiple memory types
to multiple ioreq servers, e.g. mapping HVMMEM_ioreq_serverX to
ioreq server X, This wrapper shall be updated when such change
is made.
Signed-off-by: Yu Zhang <yu.c.zhang@linux.intel.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Bernhard M. Wiedemann
Juergen Gross
Petre Pircalabu
Ross Lagerwall
Wei Liu
Zhongze Liu
Jan Beulich
Peter Große
George Dunlap
Roger Pau Monné
Andrew Cooper
Ian Jackson
Anshul Makkar
Julien Grall
Andrii Anisov
Charles Arnold
Robin Lee
Anthony PERARD
Jennifer Herbert
Alistair Francis
Luwei Kang
Jonathan Davies
Dario Faggioli
Yu Zhang