c/s 5de961d9c0 "x86: do not enable global pages when virtualized on AMD or
Hygon hardware" in fact does. Fix the calculation in pge_init().
While fixing this, adjust the command line documenation, first to use the
newer style, and to expand the description to discuss cases where the option
might be useful to use, but Xen can't account for by default.
Fixes: 5de961d9c0 ('x86: do not enable global pages when virtualized on AMD or Hygon hardware')
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
And remove all mention of it in docs. It hasn't been used since
9ead9afcb9 ("Add configure --with-sysconfig-leaf-dir=SUBDIR to set
CONFIG_LEAF_DIR").
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Extend the livepatch list operation to fetch also payloads' metadata.
This is achieved by extending the sysctl list interface with 2 extra
guest handles:
* metadata - an array of arbitrary size strings
* metadata_len - an array of metadata strings' lengths (uin32_t each)
Payloads' metadata is a string of arbitrary size and does not have an
upper bound limit. It may also vary in size between payloads.
In order to let the userland allocate enough space for the incoming
data add a metadata total size field to the list sysctl operation and
fill it with total size of all payloads' metadata.
Extend the libxc to handle the metadata back-to-back data transfers
as well as metadata length array data transfers.
The xen-livepatch userland tool is extended to always display the
metadata for each received module. The metadata is received with the
following format: key=value\0key=value\0...key=value\0. The format is
modified to the following one: key=value;key=value;...key=value.
The new format allows to easily parse the metadata for a given module
by a machine.
Signed-off-by: Pawel Wieczorkiewicz <wipawel@amazon.de>
Reviewed-by: Andra-Irina Paraschiv <andraprs@amazon.com>
Reviewed-by: Martin Pohlack <mpohlack@amazon.de>
Reviewed-by: Norbert Manthey <nmanthey@amazon.de>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Ross Lagerwall <ross.lagerwall@citrix.com>
The payloads' name strings can be of arbitrary size (typically small
with an upper bound of XEN_LIVEPATCH_NAME_SIZE).
Current implementation of the list operation interface allows to copy
names in the XEN_LIVEPATCH_NAME_SIZE chunks regardless of its actual
size and enforces space allocation requirements on userland tools.
To unify and simplify the interface, handle the name strings of
arbitrary size by copying them in adhering chunks to the userland.
In order to let the userland allocate enough space for the incoming
data add an auxiliary interface xc_livepatch_list_get_sizes() that
provides the current number of payload entries and the total size of
all name strings. This is achieved by extending the sysctl list
interface with an extra fields: name_total_size.
The xc_livepatch_list_get_sizes() issues the livepatch sysctl list
operation with the nr field set to 0. In this mode the operation
returns the number of payload entries and calculates the total sizes
for all payloads' names.
When the sysctl operation is issued with a non-zero nr field (for
instance with a value obtained earlier with the prior call to the
xc_livepatch_list_get_sizes()) the new field name_total_size provides
the total size of actually copied data.
Extend the libxc to handle the name back-to-back data transfers.
The xen-livepatch tool is modified to start the list operation with a
call to the xc_livepatch_list_get_sizes() to obtain the actual number
of payloads as well as the necessary space for names.
The tool now always requests the actual number of entries and leaves
the preemption handling to the libxc routine. The libxc still returns
'done' and 'left' parameters with the same semantic allowing the tool
to detect anomalies and react to them. At the moment it is expected
that the tool receives the exact number of entries as requested.
The xen-livepatch tool has been also modified to handle the name
back-to-back transfers correctly.
Signed-off-by: Pawel Wieczorkiewicz <wipawel@amazon.de>
Reviewed-by: Andra-Irina Paraschiv <andraprs@amazon.com>
Reviewed-by: Bjoern Doebel <doebel@amazon.de>
Reviewed-by: Martin Pohlack <mpohlack@amazon.de>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Ross Lagerwall <ross.lagerwall@citrix.com>
This is the initial implementation of the expectations enhancement
to improve inline asm livepatching.
Expectations are designed as optional feature, since the main use of
them is planned for inline asm livepatching. The flag enabled allows
to control the expectation state.
Each expectation has data and len fields that describe the data
that is expected to be found at a given patching (old_addr) location.
The len must not exceed the data array size. The data array size
follows the size of the opaque array, since the opaque array holds
the original data and therefore must match what is specified in the
expectation (if enabled).
The payload structure is modified as each expectation structure is
part of the livepatch_func structure and hence extends the payload.
Each expectation is checked prior to the apply action (i.e. as late
as possible to check against the most current state of the code).
For the replace action a new payload's expectations are checked AFTER
all applied payloads are successfully reverted, but BEFORE new payload
is applied. That breaks the replace action's atomicity and in case of
an expectation check failure would leave a system with all payloads
reverted. That is obviously insecure. Use it with caution and act
upon replace errors!
Signed-off-by: Pawel Wieczorkiewicz <wipawel@amazon.de>
Reviewed-by: Andra-Irina Paraschiv <andraprs@amazon.com>
Reviewed-by: Martin Pohlack <mpohlack@amazon.de>
Reviewed-by: Norbert Manthey <nmanthey@amazon.de>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Livepatch only tracks an entire payload applied/reverted state. But,
with an option to supply the apply_payload() and/or revert_payload()
functions as optional hooks, it becomes possible to intermix the
execution of the original apply_payload()/revert_payload() functions
with their dynamically supplied counterparts.
It is important then to track the current state of every function
being patched and prevent situations of unintentional double-apply
or unapplied revert.
To support that, it is necessary to extend public interface of the
livepatch. The struct livepatch_func gets additional field holding
the applied/reverted state marker.
To reflect the livepatch payload ABI change, bump the version flag
LIVEPATCH_PAYLOAD_VERSION up to 2.
[And also update the top of the design document]
Signed-off-by: Pawel Wieczorkiewicz <wipawel@amazon.de>
Reviewed-by: Andra-Irina Paraschiv <andraprs@amazon.com>
Reviewed-by: Bjoern Doebel <doebel@amazon.de>
Reviewed-by: Martin Pohlack <mpohlack@amazon.de>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Julien Grall <julien.grall@arm.com>
Reviewed-by: Ross Lagerwall <ross.lagerwall@citrix.com>
By default, in the quiescing zone, a livepatch payload is applied with
apply_payload() and reverted with revert_payload() functions. Both of
the functions receive the payload struct pointer as a parameter. The
functions are also a place where standard 'load' and 'unload' module
hooks are executed.
To increase livepatching system's agility and provide more flexible
long-term livepatch solution, allow to overwrite the default apply
and revert action functions with hook-like supplied alternatives.
The alternative functions are optional and the default functions are
used by default.
Since the alternative functions have direct access to the livepatch
payload structure, they can better control context of the 'load' and
'unload' hooks execution as well as exact instructions replacement
workflows. They can be also easily extended to support extra features
in the future.
To simplify the alternative function generation move code responsible
for payload and livepatch region registration outside of the function.
That way it is guaranteed that the registration step occurs even for
newly supplied functions.
Signed-off-by: Pawel Wieczorkiewicz <wipawel@amazon.de>
Reviewed-by: Petre Eftime <epetre@amazon.com>
Reviewed-by: Martin Pohlack <mpohlack@amazon.com>
Reviewed-by: Norbert Manthey <nmanthey@amazon.com>
Reviewed-by: Andra-Irina Paraschiv <andraprs@amazon.com>
Reviewed-by: Bjoern Doebel <doebel@amazon.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Ross Lagerwall <ross.lagerwall@citrix.com>
This is an implementation of 4 new livepatch module vetoing hooks,
that can be optionally supplied along with modules.
Hooks that currently exists in the livepatch mechanism aren't agile
enough and have various limitations:
* run only from within a quiescing zone
* cannot conditionally prevent applying or reverting
* do not have access to the module context
To address these limitations the following has been implemented:
1) pre-apply hook
runs before the apply action is scheduled for execution. Its main
purpose is to prevent from applying a livepatch when certain
expected conditions aren't met or when mutating actions implemented
in the hook fail or cannot be executed.
2) post-apply hook
runs after the apply action has been executed and quiescing zone
exited. Its main purpose is to provide an ability to follow-up on
actions performed by the pre- hook, when module application was
successful or undo certain preparation steps of the pre- hook in
case of a failure. The success/failure error code is provided to
the post- hooks via the rc field of the payload structure.
3) pre-revert hook
runs before the revert action is scheduled for execution. Its main
purpose is to prevent from reverting a livepatch when certain
expected conditions aren't met or when mutating actions implemented
in the hook fail or cannot be executed.
4) post-revert hook
runs after the revert action has been executed and quiescing zone
exited. Its main purpose is to perform cleanup of all previously
executed mutating actions in order to restore the original system
state from before the current module application.
The success/failure error code is provided to the post- hooks via
the rc field of the payload structure.
The replace action performs atomically the following actions:
- revert all applied modules
- apply a single replacement module.
With the vetoing hooks in place various inter-hook dependencies may
arise. Also, during the revert part of the operation certain vetoing
hooks may detect failing conditions that previously were satisfied.
That could in turn lead to situation when the revert part must be
rolled back with all the pre- and post- hooks re-applied, which again
can't be guaranteed to always succeed.
The simplest response to this complication is to disallow the replace
action completely on modules with vetoing hooks.
Signed-off-by: Pawel Wieczorkiewicz <wipawel@amazon.de>
Reviewed-by: Andra-Irina Paraschiv <andraprs@amazon.com>
Reviewed-by: Petre Eftime <epetre@amazon.com>
Reviewed-by: Martin Pohlack <mpohlack@amazon.de>
Reviewed-by: Norbert Manthey <nmanthey@amazon.de>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Ross Lagerwall <ross.lagerwall@citrix.com>
By default Livepatch enforces the following buildid-based dependency
chain between livepatch modules:
1) first module depends on given hypervisor buildid
2) every consecutive module depends on previous module's buildid
This way proper livepatch stack order is maintained and enforced.
While it is important for production livepatches it limits agility and
blocks usage of testing or debug livepatches. These kinds of livepatch
modules are typically expected to be loaded at any time irrespective
of current state of the modules stack.
To enable testing and debug livepatches allow user dynamically ignore
the inter-modules dependency. In this case only hypervisor buildid
match is verified and enforced.
To allow userland pass additional paremeters for livepatch actions
add support for action flags.
Each of the apply, revert, unload and revert action gets additional
32-bit parameter 'flags' where extra flags can be applied in a mask
form.
Initially only one flag '--nodeps' is added for the apply action.
This flag modifies the default buildid dependency check as described
above.
The global sysctl interface input flag parameter is defined with a
single corresponding flag macro:
LIVEPATCH_ACTION_APPLY_NODEPS (1 << 0)
The userland xen-livepatch tool is modified to support the '--nodeps'
flag for apply and load commands. A general mechanism for specifying
more flags in the future for apply and other action is however added.
Signed-off-by: Pawel Wieczorkiewicz <wipawel@amazon.de>
Reviewed-by: Andra-Irina Paraschiv <andraprs@amazon.com>
Reviewed-by: Eslam Elnikety <elnikety@amazon.de>
Reviewed-by: Petre Eftime <epetre@amazon.com>
Reviewed-by: Leonard Foerster <foersleo@amazon.de>
Reviewed-by: Martin Pohlack <mpohlack@amazon.de>
Reviewed-by: Norbert Manthey <nmanthey@amazon.de>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Ross Lagerwall <ross.lagerwall@citrix.com>
This change is part of a independant stacked livepatch modules
feature. This feature allows to bypass dependencies between modules
upon loading, but still verifies Xen build ID matching.
In order to prevent (up)loading any livepatches built for different
hypervisor version as indicated by the Xen Build ID, add checking for
the payload's vs Xen's build id match.
To achieve that embed into every livepatch another section with a
dedicated hypervisor build id in it. After the payload is loaded and
the .livepatch.xen_depends section becomes available, perform the
check and reject the payload if there is no match.
Signed-off-by: Pawel Wieczorkiewicz <wipawel@amazon.de>
Reviewed-by: Andra-Irina Paraschiv <andraprs@amazon.com>
Reviewed-by: Bjoern Doebel <doebel@amazon.de>
Reviewed-by: Eslam Elnikety <elnikety@amazon.de>
Reviewed-by: Martin Pohlack <mpohlack@amazon.de>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Begin to document how the x86 build of Xen boots. It is by no means complete,
but is a start.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
When using global pages a full tlb flush can only be performed by
toggling the PGE bit in CR4, which is usually quite expensive in terms
of performance when running virtualized. This is specially relevant on
AMD or Hygon hardware, which doesn't have the ability to do selective
CR4 trapping, but can also be relevant on e.g. Intel if the underlying
hypervisor also traps accesses to the PGE CR4 bit.
In order to avoid this performance penalty, do not use global pages
when running virtualized on AMD or Hygon hardware. A command line option
'global-pages' is provided in order to allow the user to select whether
global pages will be enabled for PV guests.
The above figures are from a PV shim running on AMD hardware with
32 vCPUs:
PGE enabled, x2APIC mode:
(XEN) Global lock flush_lock: addr=ffff82d0804b01c0, lockval=1adb1adb, not locked
(XEN) lock:1841883(1375128998543), block:1658716(10193054890781)
Average lock time: 746588ns
Average block time: 6145147ns
PGE disabled, x2APIC mode:
(XEN) Global lock flush_lock: addr=ffff82d0804af1c0, lockval=a8bfa8bf, not locked
(XEN) lock:2730175(657505389886), block:2039716(2963768247738)
Average lock time: 240829ns
Average block time: 1453029ns
As seen from the above figures the lock and block time of the flush
lock is reduced to approximately 1/3 of the original value.
Note that XEN_MINIMAL_CR4 and mmu_cr4_features are not modified, and
thus global pages are left enabled for the hypervisor. This is not an
issue because the code to switch the control registers (cr3 and cr4)
already takes into account such situation and performs the necessary
flushes. The same already happens when using XPTI or PCIDE, as the
guest cr4 doesn't have global pages enabled in that case either.
Also note that the suspend and resume code is correct in writing
mmu_cr4_features into cr4 on resume, since that's the cr4 used by the
idle vCPU which is the context used by the suspend and resume routine.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Creative Commons is a more common license than GPL for documentation purposes.
Switch to using CC-BY-4.0 to explicitly permit re-purposing and remixing of
the content.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Lars Kurth <lars.kurth@citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
Xen used to have single, system-wide limits for the number of grant
frames and maptrack frames a guest was allowed to create. Increasing
or decreasing this single limit on the Xen command-line would change
the limit for all guests on the system.
Later, per-domain limits for these values was created. The system-wide
limits became strict limits: domains could not be created with higher
limits, but could be created with lower limits. However, that change
also introduced a range of different "default" values into various
places in the toolstack:
- The python libxc bindings hard-coded these values to 32 and 1024,
respectively
- The libxl default values are 32 and 1024 respectively.
- xl will use the libxl default for maptrack, but does its own default
calculation for grant frames: either 32 or 64, based on the max
possible mfn.
These defaults interact poorly with the hypervisor command-line limit:
- The hypervisor command-line limit cannot be used to raise the limit
for all guests anymore, as the default in the toolstack will
effectively override this.
- If you use the hypervisor command-line limit to *reduce* the limit,
then the "default" values generated by the toolstack are too high,
and all guest creations will fail.
In other words, the toolstack defaults require any change to be
effected by having the admin explicitly specify a new value in every
guest.
In order to address this, have grant_table_init treat negative values
for max_grant_frames and max_maptrack_frames as instructions to use the
system-wide default, and have all the above toolstacks default to passing
-1 unless a different value is explicitly configured.
This restores the old behavior in that changing the hypervisor command-line
option can change the behavior for all guests, while retaining the ability
to set per-guest values. It also removes the bug that reducing the
system-wide max will cause all domains without explicit limits to fail.
NOTE: - The Ocaml bindings require the caller to always specify a value,
and the code to start a xenstored stubdomain hard-codes these to 4
and 128 respectively; this behavour will not be modified.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wl@xen.org>
Acked-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
In particular, say clearly that X.Y-unstable should be thus, not
X.Y.0-unstable.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Provide a rune, following which a magit selective git add
(or git add -p) can be used to commit the appropriate changes.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
It is only necessary to change Config.mk if it refers to unstable
branches anywhere. This time, for example, it didn't.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Changesets 319f9a0ba9 ("passthrough: quarantine PCI devices") and
ba2ab00bbb ("IOMMU: default to always quarantining PCI devices")
introduced PCI device "quarantine" behavior, but did not document how
the pci-assignable-add and -remove functions act in regard to this.
Rectify this.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Wei Liu <wl@xen.org>
Reviewed-by: Paul Durrant <paul@xen.org>
Release-acked-by: Juergen Gross <jgross@suse.com>
XSA-302 relies on the use of libxl's "assignable-add" feature to prepare
devices to be assigned to untrusted guests.
Unfortunately, this is not considered a strictly required step for
device assignment. The PCI passthrough documentation on the wiki
describes alternate ways of preparing devices for assignment, and
libvirt uses its own ways as well. Hosts where these alternate methods
are used will still leave the system in a vulnerable state after the
device comes back from a guest.
Default to always quarantining PCI devices, but provide a command line
option to revert back to prior behavior (such that people who both
sufficiently trust their guests and want to be able to use devices in
Dom0 again after they had been in use by a guest wouldn't need to
"manually" move such devices back from DomIO to Dom0).
This is XSA-306.
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Wei Liu <wl@xen.org>
Fix text about release cycle. Drop the conjured up example that's no
longer applicable.
Signed-off-by: Wei Liu <wl@xen.org>
Reviewed-by: Juergen Gross <jgross@suse.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
See patch documentation and comments.
This is part of XSA-305 / CVE-2019-11135
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
To protect against the TSX Async Abort speculative vulnerability, Intel have
released new microcode for affected parts which introduce the MSR_TSX_CTRL
control, which allows TSX to be turned off. This will be architectural on
future parts.
Introduce tsx= to provide a global on/off for TSX, including its enumeration
via CPUID. Provide stub virtualisation of this MSR, as it is not exposed to
guests at the moment.
VMs may have booted before microcode is loaded, or before hosts have rebooted,
and they still want to migrate freely. A VM which booted seeing TSX can
migrate safely to hosts with TSX disabled - TSX will start unconditionally
aborting, but still behave in a manner compatible with the ABI.
The guest-visible behaviour is equivalent to late loading the microcode and
setting the RTM_DISABLE bit in the course of live patching.
This is part of XSA-305 / CVE-2019-11135
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
CVE-2018-12207 covers a set of errata on various Intel processors, whereby a
machine check exception can be generated in a corner case when an executable
mapping changes size or cacheability without TLB invalidation. HVM guest
kernels can trigger this to DoS the host.
To mitigate, in affected hardware, all EPT superpages are marked NX. When an
instruction fetch violation is observed against the superpage, the superpage
is shattered to 4k and has execute permissions restored. This prevents the
guest kernel from being able to create the necessary preconditions in the iTLB
to exploit the vulnerability.
This does come with a workload-dependent performance overhead, caused by
increased TLB pressure. Performance can be restored, if guest kernels are
trusted not to mount an attack, by specifying ept=exec-sp on the command line.
This is part of XSA-304 / CVE-2018-12207
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: George Dunlap <george.dunlap@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
The current documentation is misleading for a few reasons:
1) The synchronization happens on all exit/entry from/to the guest.
This includes from EL0 (i.e userspace).
2) Trusted guest can also generate SErrors (e.g. memory failure)
3) Without RAS support, SErrors are IMP DEFINED. Unless you have a
complete TRM in hand, you can't really make a decision.
4) The documentation is written around performance when this is not
the first concern.
The documentation is now reworked to focus on the consequences of using
serrors="panic" and avoid to go in details on the exact implementation.
Signed-off-by: Julien Grall <julien.grall@arm.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Release-acked-by: Juergen Gross <jgross@suse.com>
Per the Arm ARM (D4.5 in ARM DDI 0487E.a), SError may be precise or
imprecise.
Imprecise means the state presented to the exception handler is not
guaranteed to be consistent with any point in the excution stream from
which the exception was taken. In other words, they are likely to be
fatal as you can't return safely from them.
Without the RAS extension, the Arm architecture does not provide a way
to differentiate between imprecise and precise SError. Furthermore Xen
has no support for RAS yet. So from a software POV, there is not much
we can do.
More generally, forwarding blindly SErrors to the guest is likely to be
the wrong thing to do. Indeed, Xen is not able to know what is the
content of the SError. This may be a critical device used by the
hypervisor that is about to fail.
In a nutshell, the option serrors=forward is not safe to use in any
environment with the current state of Xen. Therefore the option and any
code related to it are completely removed.
Take the opportunity to rework the comment in do_trap_data_abort() as
all SErrors/External Abort generated by the hypervisor will result in
a crash of the system no matter what the user passed on the command
line.
Signed-off-by: Julien Grall <julien.grall@arm.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Release-acked-by: Juergen Gross <jgross@suse.com>
When serrors=diverse is selected by the user, we will only synchronize
the pending SErrors on entry to hypervisor from guest context and exit
from guest to hypervisor context.
We don't need synchronize SErrors between guest context switch as they
would be categorized to Hypervisor generated SErrors in any case.
Signed-off-by: Julien Grall <julien.grall@arm.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Release-acked-by: Juergen Gross <jgross@suse.com>
l1tf-barrier is an inappropriate name, and came about because of restrictions
on could be discussed publicly when the patches were proposed.
In practice, it is for general Spectre v1 mitigations, and is necessary in all
cases. An adversary which can control speculation in Xen can leak data in
cross-core (BCBS, etc) or remote (NetSpectre) scenarios - the problem is not
limited to just L1TF with HT active.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
LIBXL_PASSTHROUGH_UNKNOWN (aka "ENABLED" in an earlier uncommitted
version of this code) is doing double duty. We actually need all of
the following to be specifiable:
* "default": enable PT iff we have devices to
pass through specified in the initial config file.
* "enabled" (and fail if the platform doesn't support it).
* "disabled" (and reject future PT hotplug).
* "share_pt"/"sync_pt": enable PT and set a specific PT mode.
Defaulting and error checking should be done in libxl. So, we make
several changes here.
We introduce "enabled", and rename "unknown" to "default".
We move all of the error checking and defaulting code from xl into
libxl. Now, libxl__domain_config_setdefault has all of the necessary
information to get this right. So we can do it all there. Choosing
the specific mode is arch-specific.
We can also arrange to have only one place each which calculates
(i) whether passthrough needs to be enabled because pt devices were
specified (ii) whether pt_share can be used (for each arch).
xl now only has to parse the enum in the same way as it parses all
other enums.
This change fixes a regression from earlier 4.13-pre: until recent
changes, passthrough was only enabled by default if passthrough
devices were specified. We restore this behaviour.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
CC: Stefano Stabellini <sstabellini@kernel.org>
CC: Julien Grall <julien@xen.org>
CC: Volodymyr Babchuk <Volodymyr_Babchuk@epam.com>
CC: Andrew Cooper <Andrew.Cooper3@citrix.com>
CC: Paul Durrant <pdurrant@gmail.com>
CC: Jan Beulich <jbeulich@suse.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
The xen-ucode utility is new with the late loading improvements in 4.13.
Update the documentation suitably.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Put together an introduction page for the Sphinx/RST docs, along with a
glossary which will accumulate over time.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Lars Kurth <lars.kurth@citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
Sphinx, its linters, and RST modes in common editors, expect 3 spaces of
indentation. Some bits already conform to this expectation. Update the
rest to match.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Lars Kurth <lars.kurth@citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
The binding for the dom0less module does not match Xen implementation.
Any module should contain the compatible "multiboot,module" to be
recognized.
This was clearly an oversight as other examples with Xen code base
provide the compatible "multiboot,module".
So fix the binding and the example associated to it.
Signed-off-by: Julien Grall <julien.grall@arm.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Release-acked-by: Juergen Gross <jgross@suse.com>
Specifically
* xen.org to xenproject.org
* http to https
* Replaced pages where page has moved
(including on xen pages as well as external pages)
* Removed some URLs (e.g. downloads for Linux PV drivers)
Tested-by: Lars Kurth <lars.kurth@citrix.com>
Signed-off-by: Lars Kurth <lars.kurth@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wl@xen.org>
Release-acked-by: Juergen Gross <jgross@suse.com>
The "TO BE DOCUMENTED" section of the xl man page still references
tmem. So does the xl.conf man page. Remove the references.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wl@xen.org>
Release-acked-by: Juergen Gross <jgross@suse.com>
When one core is loading ucode, handling NMI on sibling threads or
on other cores in the system might be problematic. By rendezvousing
all CPUs in NMI handler, it prevents NMI acceptance during ucode
loading.
Basically, some work previously done in stop_machine context is
moved to NMI handler. Primary threads call in and load ucode in
NMI handler. Secondary threads wait for the completion of ucode
loading on all CPU cores. An option is introduced to disable this
behavior.
Control thread doesn't rendezvous in NMI handler by calling self_nmi()
(in case of unknown_nmi_error() being triggered). The side effect is
control thread might be handling an NMI while other threads are loading
ucode. If an ucode is to update something shared by a whole socket,
control thread may be accessing things that are being updating by the
ucode loading on other cores. It is not safe. Update ucode on the
control thread first to mitigate this issue.
Signed-off-by: Sergey Dyasli <sergey.dyasli@citrix.com>
Signed-off-by: Chao Gao <chao.gao@intel.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Both Cortex-A57 (erratum 1319537) and Cortex-A72 (erratum 1319367) can
end with corrupted TLBs if they speculate an AT instruction while S1/S2
system registers in inconsistent state.
The workaround is the same as for Cortex A-76 implemented by commit
a18be06aca "xen/arm: Implement workaround for Cortex-A76 erratum 1165522",
so it is only necessary to plumb in the cpuerrata framework.
Signed-off-by: Julien Grall <julien.grall@arm.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
The domain builder no longer uses local CPUID instructions for policy
decisions. This resolves a key issue for PVH dom0's. However, as PV dom0's
have never had faulting enforced, leave a command line option to restore the
old behaviour.
Advertise virtualised faulting support to control domains unless the opt-out
has been used.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
...and hence the ability to disable IOMMU mappings, and control EPT
sharing.
This patch introduces a new 'libxl_passthrough' enumeration into
libxl_domain_create_info. The value will be set by xl either when it parses
a new 'passthrough' option in xl.cfg, or implicitly if there is passthrough
hardware specified for the domain.
If the value of the passthrough configuration option is 'disabled' then
the XEN_DOMCTL_CDF_iommu flag will be clear in the xen_domctl_createdomain
flags, thus allowing the toolstack to control whether the domain gets
IOMMU mappings or not (where previously they were globally set).
If the value of the passthrough configuration option is 'sync_pt' then
a new 'iommu_opts' field in xen_domctl_createdomain will be set with the
value XEN_DOMCTL_IOMMU_no_sharept. This will override the global default
set in iommu_hap_pt_share, thus allowing the toolstack to control whether
EPT sharing is used for the domain.
If the value of passthrough is 'enabled' then xl will choose an appropriate
default according to the type of domain and hardware support.
NOTE: The 'iommu_memkb' overhead in libxl_domain_build_info will now only
be set if passthrough is 'sync_pt' (or xl has chosen this mode as
a default).
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Acked-by: Julien Grall <julien.grall@arm.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
This enumeration controls TEE type for a domain. Currently there is
two possible options: either 'none' or 'optee'.
'none' is the default value and it basically disables TEE support at
all.
'optee' enables access to the OP-TEE running on a host machine. This
requires special OP-TEE build with virtualization support enabled.
Signed-off-by: Volodymyr Babchuk <volodymyr_babchuk@epam.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
debugtrace is normally writing trace entries into a single trace
buffer. There are cases where this is not optimal, e.g. when hunting
a bug which requires writing lots of trace entries and one cpu is
stuck. This will result in other cpus filling the trace buffer and
finally overwriting the interesting trace entries of the hanging cpu.
In order to be able to debug such situations add the capability to use
per-cpu trace buffers. This can be selected by specifying the
debugtrace boot parameter with the modifier "cpu:", like:
debugtrace=cpu:16
At the same time switch the parsing function to accept size modifiers
(e.g. 4M or 1G).
Printing out the trace entries is done for each buffer in order to
minimize the effort needed during printing. As each entry is prefixed
with its sequence number sorting the entries can easily be done when
analyzing them.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Andrew Cooper
Anthony PERARD
Pawel Wieczorkiewicz
Roger Pau Monné
George Dunlap
Ian Jackson
Jan Beulich
Wei Liu
Julien Grall
Lars Kurth
Stefano Stabellini
Juergen Gross
Sergey Dyasli
Paul Durrant
Volodymyr Babchuk