It was requested that we provide a way independent of the MCE reporting
interface that Dom0 software could use to get hold of the values for
particular CPUs.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Quoting the respective Linux commit:
Intel Xeons from Ivy Bridge onwards support a processor identification
number set in the factory. To the user this is a handy unique number to
identify a particular CPU. Intel can decode this to the fab/production
run to track errors. On systems that have it, include it in the machine
check record. I'm told that this would be helpful for users that run
large data centers with multi-socket servers to keep track of which CPUs
are seeing errors.
Newer AMD CPUs support this too, at different MSR numbers.
Take the opportunity and hide __MC_NMSRS from the public interface going
forward.
[Linux commit 3f5a7896a5096fd50030a04d4c3f28a7441e30a5]
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Newer distros like CentOS 8 do not have brctl available. As such, we
can't use it to configure networking anymore.
This patch will fall back to 'ip' or 'bridge' commands if brctl is not
available in the working PATH.
This would be a likely backport candidate to any version expected to be
built on CentOS 8 etc.
Signed-off-by: Steven Haigh <netwiz@crc.id.au>
Acked-by: Wei Liu <wl@xen.org>
Just like the BSP/AP paths, %cr4 is loaded with only PAE. Defer restoring all
of %cr4 (MCE in particular) until all the system structures (IDT/TSS in
particular) have been loaded.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Only the callee-preserved registers need saving/restoring. Spill them to the
stack like regular functions do. %rsp is now the only GPR which gets stashed
in .data
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
The trampoline has already set up the idle pagetables (which are the correct
ones to use), and sanitised the flags state.
For %ss, __HYPERVISOR_DS64 is the correct descriptor to restore.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
do_suspend_lowlevel() behaves as a function call, even when the trampoline
jumps back into the middle of it. Discuss this property, while renaming the
far-too-generic __ret_point to s3_resume.
Optimise the calling logic for acpi_enter_sleep_state(). $3 doesn't require a
64bit write, and the function isn't variadic so doesn't need to specify zero
FPU registers in use.
In the case of an acpi_enter_sleep_state() error, we didn't actually lose
state so don't need to restore it. Jump straight to the end.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
promote_l4_table() is different from its lower level helpers, by having an
extra return path out of the middle of the loop in the case of a failure.
Break from the loop, which is consistent with the other helpers, and
functionally equivalent.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
The existing code assumes that the first mfn passed to the boot
allocator is mapped, which creates problems when, e.g., we do not have
a direct map, and may create other bootstrapping problems in the
future. Make it static. The size is kept the same as before (1 page).
Signed-off-by: Hongyan Xia <hongyxia@amazon.com>
Reviewed-by: Julien Grall <julien@xen.org>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Switch over union key to determine how to populate 'union' in Go struct.
Since the unions of C types cannot be directly accessed in cgo, use a
typeof trick to typedef a struct in the cgo preamble that is analagous
to each inner struct of a keyed union. For example, to define a struct
for the hvm inner struct of libxl_domain_build_info, do:
typedef typeof(((struct libxl_domain_build_info *)NULL)->u.hvm) libxl_domain_build_info_type_union_hvm;
Signed-off-by: Nick Rosbrook <rosbrookn@ainfosec.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
Begin implementation of fromC marshaling functions for generated struct
types. This includes support for converting fields that are basic
primitive types such as string and integer types, nested anonymous
structs, nested libxl structs, and libxl built-in types.
This patch does not implement conversion of arrays or keyed unions.
Signed-off-by: Nick Rosbrook <rosbrookn@ainfosec.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
Add struct and keyed union generation to gengotypes.py. For keyed unions,
use a method similar to gRPC's oneof to interpret C unions as Go types.
Meaning, for a given struct with a union field, generate a struct for
each sub-struct defined in the union. Then, define an interface of one
method which is implemented by each of the defined sub-structs. For
example:
type domainBuildInfoTypeUnion interface {
isdomainBuildInfoTypeUnion()
}
type DomainBuildInfoTypeUnionHvm struct {
// HVM-specific fields...
}
func (x DomainBuildInfoTypeUnionHvm) isdomainBuildInfoTypeUnion() {}
type DomainBuildInfoTypeUnionPv struct {
// PV-specific fields...
}
func (x DomainBuildInfoTypeUnionPv) isdomainBuildInfoTypeUnion() {}
type DomainBuildInfoTypeUnionPvh struct {
// PVH-specific fields...
}
func (x DomainBuildInfoTypeUnionPvh) isdomainBuildInfoTypeUnion() {}
Then, remove existing struct definitions in xenlight.go that conflict
with the generated types, and modify existing marshaling functions to
align with the new type definitions. Notably, drop "time" package since
fields of type time.Duration are now of type uint64.
Signed-off-by: Nick Rosbrook <rosbrookn@ainfosec.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
Re-define Hwcap as [8]uint32, and implement toC function. Also, re-name and
modify signature of toGo function to fromC.
Signed-off-by: Nick Rosbrook <rosbrookn@ainfosec.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
Define CpuidPolicyList as a string so that libxl_cpuid_parse_config can
be used in the toC function.
For now, fromC is a no-op since libxl does not support a way to read a
policy, modify it,and then give it back to libxl.
Signed-off-by: Nick Rosbrook <rosbrookn@ainfosec.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
Define EvLink as empty struct as there is currently no reason the internal of
this type should be used in Go.
Implement fromC and toC functions as no-ops.
Signed-off-by: Nick Rosbrook <rosbrookn@ainfosec.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
Define MsVmGenid as [int(C.LIBXL_MS_VM_GENID_LEN)]byte and implement fromC and toC functions.
Signed-off-by: Nick Rosbrook <rosbrookn@ainfosec.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
Re-name and modify signature of toGo function to fromC. The reason for
using 'fromC' rather than 'toGo' is that it is not a good idea to define
methods on the C types. Also, add error return type to Bitmap's toC function.
Finally, as code-cleanup, re-organize the Bitmap type's comments as per
Go conventions.
Signed-off-by: Nick Rosbrook <rosbrookn@ainfosec.com>
Acked-by: George Dunlap <george.dunlap@citrix.com>
--
Changes in v2:
- Use consistent variable naming for slice created from
libxl_bitmap.
Define KeyValueList as empty struct as there is currently no reason for
this type to be available in the Go package.
Implement fromC and toC functions as no-ops.
Signed-off-by: Nick Rosbrook <rosbrookn@ainfosec.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
Define Defbool as struct analagous to the C type, and define the type
'defboolVal' that represent true, false, and default defbool values.
Implement Set, Unset, SetIfDefault, IsDefault, Val, and String functions
on Defbool so that the type can be used in Go analagously to how its
used in C.
Finally, implement fromC and toC functions.
Signed-off-by: Nick Rosbrook <rosbrookn@ainfosec.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
Introduce gengotypes.py to generate Go code the from IDL. As a first step,
implement 'enum' type generation.
As a result of the newly-generated code, remove the existing, and now
conflicting definitions in xenlight.go. In the case of the Error type,
rename the slice 'errors' to 'libxlErrors' so that it does not conflict
with the standard library package 'errors.' And, negate the values used
in 'libxlErrors' since the generated error values are negative.
Signed-off-by: Nick Rosbrook <rosbrookn@ainfosec.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
AMD and friends explicitly specify that 64-bit operands aren't possible
for these insns. Nevertheless REX.W isn't fully ignored: It still
cancels a possible operand size override (0x66). Intel otoh explicitly
provides for 64-bit operands on the respective insn page of the SDM.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
The version of this header present in the Linux source tree has contained
such macros for some time. These macros, as the names imply, allow front
or back rings to be set up for existent (rather than freshly created and
zeroed) shared rings.
This patch is to update this, the canonical version of the header, to
match the latest definition of these macros in the Linux source.
NOTE: The way the new macros are defined allows the FRONT/BACK_RING_INIT
macros to be re-defined in terms of them, thereby reducing
duplication.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
AMD and friends explicitly specify that 64-bit operands aren't possible
for these insns. Nevertheless REX.W isn't fully ignored: It still
cancels a possible operand size override (0x66). Intel otoh explicitly
provides for 64-bit operands on the respective insn page of the SDM.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
The legacy / compatibility mode ES, CS, SS, and DS overrides are fully
ignored prefixes in 64-bit mode, i.e. they in particular don't cancel an
earlier FS or GS one. (They don't violate the REX-prefix-must-be-last
rule though.)
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Tested-by: Andrew Cooper <andrew.cooper3@citrix.com>
They either need to be transformed to atomics to work correctly
(currently they left unprotected for HVM domains) or dropped entirely
as taking a per-domain spinlock is too expensive for high-vCPU count
domains even for debug build given this lock is taken too often.
Choose the latter as they are not extremely important anyway.
Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
c/s 5de961d9c0 "x86: do not enable global pages when virtualized on AMD or
Hygon hardware" in fact does. Fix the calculation in pge_init().
While fixing this, adjust the command line documenation, first to use the
newer style, and to expand the description to discuss cases where the option
might be useful to use, but Xen can't account for by default.
Fixes: 5de961d9c0 ('x86: do not enable global pages when virtualized on AMD or Hygon hardware')
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
The functions alloc_page_type(), alloc_lN_table(), free_page_type()
and free_lN_table() are confusingly named: nothing is being allocated
or freed. Rather, the page being passed in is being either validated
or devalidated for use as the specific type; in the specific case of
pagetables, these may be promoted or demoted (i.e., grab appropriate
references for PTEs).
Rename alloc_page_type() and free_page_type() to validate_page() and
devalidate_page(). Also rename alloc_segdesc_page() to
validate_segdesc_page(), since this is what it's doing.
Rename alloc_lN_table() and free_lN_table() to promote_lN_table() and
demote_lN_table(), respectively.
After this change:
- get / put type consistenly refer to increasing or decreasing the count
- validate / devalidate consistently refers to actions done when a
type count goes 0 -> 1 or 1 -> 0
- promote / demote consistenly refers to acquiring or freeing
resources (in the form of type refs and general references) in order
to allow a page to be used as a pagetable.
No functional change.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Replace `unsigned long` with `mfn_t` as appropriate throughout
alloc/free_lN_table, get/put_page_from_lNe, and
get_lN_linear_pagetable. This obviates the need for a load of
`mfn_x()` and `_mfn()` casts.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
In many places, a PTE being modified is accompanied by the pagetable
mfn which contains the PTE (primarily in order to be able to maintain
linear mapping counts). In many cases, this mfn is stored in the
non-descript variable (or argement) "pfn".
Replace these names with lNmfn, to indicate that 1) this is a
pagetable mfn, and 2) that it is the same level as the PTE in
question. This should be enough to remind readers that it's the mfn
containing the PTE.
No functional change.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Both put_page_from_l2e and put_page_from_l3e handle having superpage
entries by looping over each page and "put"-ing each one individually.
As with putting page table entries, this code is functionally
identical, but for some reason different. Moreover, there is already
a common function, put_data_page(), to handle automatically swapping
between put_page() (for read-only pages) or put_page_and_type() (for
read-write pages).
Replace this with put_data_pages() (plural), which does the entire
loop, as well as the put_page / put_page_and_type switch.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
put_page_from_l[234]e have identical functionality for devalidating an
entry pointing to a pagetable. But mystifyingly, they duplicate the
code in slightly different arrangements that make it hard to tell that
it's the same.
Create a new function, put_pt_page(), which handles the common
functionality; and refactor all the functions to be symmetric,
differing only in the level of pagetable expected (and in whether they
handle superpages).
Other than put_page_from_l2e() gaining an ASSERT it probably should
have had already, no functional changes.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
This patch adds a specification for a 'carrier' node in xenstore to allow
a backend to notify a frontend of it's virtual carrier/link state. E.g.
a backend that is unable to forward packets from the guest because it is
not attached to a bridge may wish to advertise 'no carrier'.
While in the area also fix an erroneous backend path description.
NOTE: This is purely a documentation patch. No functional change.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
This comment isn't about CONFIG_TESTS, but about SEABIOS_DIR that has
been removed.
Originally, the comment was added by 5f82d0858d ("tools: support
SeaBIOS. Use by default when upstream qemu is configured."), then
later the SEABIOS_DIR was removed by 14ee3c05f3 ("Clone and build
Seabios by default") but that comment about the pain was left behind.
The commit that made CONFIG_TESTS painful was 85896a7c4d ("build:
add autoconf to replace custom checks in tools/check").
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
And remove all mention of it in docs. It hasn't been used since
9ead9afcb9 ("Add configure --with-sysconfig-leaf-dir=SUBDIR to set
CONFIG_LEAF_DIR").
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Calling ./configure with python3 being there but no python,
tools/configure will fail. Fix that by defaulting to python and
falling back to python3 or python2.
While at it fix the use of non portable "type -p" by replacing it by
AC_PATH_PROG().
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wl@xen.org>
[ wei: run autogen.sh ]
Reviewed-by: Ian Jackson <ian.jackson@eu.citrix.com>
update_paging_mode() has multiple bugs:
1) Booting with iommu=debug will cause it to inform you that that it called
without the pdev_list lock held.
2) When growing by more than a single level, it leaks the newly allocated
table(s) in the case of a further error.
Furthermore, the choice of default level for a domain has issues:
1) All HVM guests grow from 2 to 3 levels during construction because of the
position of the VRAM just below the 4G boundary, so defaulting to 2 is a
waste of effort.
2) The limit for PV guests doesn't take memory hotplug into account, and
isn't dynamic at runtime like HVM guests. This means that a PV guest may
get RAM which it can't map in the IOMMU.
The dynamic height is a property unique to AMD, and adds a substantial
quantity of complexity for what is a marginal performance improvement. Remove
the complexity by removing the dynamic height.
PV guests now get 3 or 4 levels based on any hotplug regions in the host.
This only makes a difference for hardware which previously had all RAM below
the 512G boundary, and a hotplug region above.
HVM guests now get 4 levels (which will be sufficient until 256TB guests
become a thing), because we don't currently have the information to know when
3 would be safe to use.
The overhead of this extra level is not expected to be noticeable. It costs
one page (4k) per domain, and one extra IO-TLB paging structure cache entry
which is very hot and less likely to be evicted.
This is XSA-311.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
The PGT_partial bit in page->type_info holds both a type count and a
general ref count. During domain tear-down, when free_page_type()
returns -ERESTART, relinquish_memory() correctly handles the general
ref count, but fails to grab an extra type count when setting
PGT_partial. When this bit is eventually cleared, type_count underflows
and triggers the following BUG in page_alloc.c:free_domheap_pages():
BUG_ON((pg[i].u.inuse.type_info & PGT_count_mask) != 0);
As far as we can tell, this page underflow cannot be exploited any any
other way: The page can't be used as a pagetable by the dying domain
because it's dying; it can't be used as a pagetable by any other
domain since it belongs to the dying domain; and ownership can't
transfer to any other domain without hitting the BUG_ON() in
free_domheap_pages().
(steal_page() won't work on a page in this state, since it requires
PGC_allocated to be set, and PGC_allocated will already have been
cleared.)
Fix this by grabbing an extra type ref if setting PGT_partial in
relinquish_memory.
This is part of XSA-310.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
When validating or de-validating pages (in alloc_lN_table and
free_lN_table respectively), the `partial_flags` local variable is
used to keep track of whether the "current" PTE started the entire
operation in a "may be partial" state.
One of the patches in XSA-299 addressed the fact that it is possible
for a previously-partially-validated entry to subsequently be found to
have invalid entries (indicated by returning -EINVAL); in which case
page->partial_flags needs to be set to indicate that the current PTE
may have the partial bit set (and thus _put_page_type() should be
called with PTF_partial_set).
Unfortunately, the patches in XSA-299 assumed that once
put_page_from_lNe() returned -ERESTART on a page, it was not possible
for it to return -EINTR. This turns out to be true for
alloc_lN_table() and free_lN_table, but not for _get_page_type() and
_put_page_type(): both can return -EINTR when called on pages with
PGT_partial set. In these cases, the pages PGT_partial will still be
set; failing to set partial_flags appropriately may allow an attacker
to do a privilege escalation similar to those described in XSA-299.
Fix this by always copying the local partial_flags variable into
page->partial_flags when exiting early.
NB that on the "get" side, no adjustment to nr_validated_entries is
needed: whether pte[i] is partially validated or entirely
un-validated, we want nr_validated_entries = i. On the "put" side,
however, we need to adjust nr_validated_entries appropriately: if
pte[i] is entirely validated, we want nr_validated_entries = i + 1; if
pte[i] is partially validated, we want nr_validated_entries = i.
This is part of XSA-310.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Changeset 6c4efc1eba ("x86/mm: Don't drop a type ref unless you held a
ref to begin with"), part of XSA-299, changed the calling discipline
of put_page_type() such that if put_page_type() returned -ERESTART
(indicating a partially de-validated page), subsequent calls to
put_page_type() must be called with PTF_partial_set. If called on a
partially de-validated page but without PTF_partial_set, Xen will
BUG(), because to do otherwise would risk opening up the kind of
privilege escalation bug described in XSA-299.
One place this was missed was in vcpu_destroy_pagetables().
put_page_and_type_preemptible() is called, but on -ERESTART, the
entire operation is simply restarted, causing put_page_type() to be
called on a partially de-validated page without PTF_partial_set. The
result was that if such an operation were interrupted, Xen would hit a
BUG().
Fix this by having vcpu_destroy_pagetables() consistently pass off
interrupted de-validations to put_old_page_type():
- Unconditionally clear references to the page, even if
put_page_and_type failed
- Set old_guest_table and old_guest_table_partial appropriately
While here, do some refactoring:
- Move clearing of arch.cr3 to the top of the function
- Now that clearing is unconditional, move the unmap to the same
conditional as the l4tab mapping. This also allows us to reduce
the scope of the l4tab variable.
- Avoid code duplication by looping to drop references on
guest_table_user
This is part of XSA-310.
Reported-by: Sarah Newman <srn@prgmr.com>
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
"Linear pagetables" is a technique which involves either pointing a
pagetable at itself, or to another pagetable the same or higher level.
Xen has limited support for linear pagetables: A page may either point
to itself, or point to another page of the same level (i.e., L2 to L2,
L3 to L3, and so on).
XSA-240 introduced an additional restriction that limited the "depth"
of such chains by allowing pages to either *point to* other pages of
the same level, or *be pointed to* by other pages of the same level,
but not both. To implement this, we keep track of the number of
outstanding times a page points to or is pointed to another page
table, to prevent both from happening at the same time.
Unfortunately, the original commit introducing this reset this count
when resuming validation of a partially-validated pagetable, dropping
some "linear_pt_entry" counts.
On debug builds on systems where guests used this feature, this might
lead to crashes that look like this:
Assertion 'oc > 0' failed at mm.c:874
Worse, if an attacker could engineer such a situation to occur, they
might be able to make loops or other abitrary chains of linear
pagetables, leading to the denial-of-service situation outlined in
XSA-240.
This is XSA-309.
Reported-by: Manuel Bouyer <bouyer@antioche.eu.org>
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
See patch comment for technical details.
Concerning the timeline, this was first discovered in the aftermath of
XSA-156 which caused #DB to be intercepted unconditionally, but only in
its SingleStep + STI form which is restricted to privileged software.
After working with Intel and identifying the problematic vmentry check,
this workaround was suggested, and the patch was posted in an RFC
series. Outstanding work for that series (not breaking Introspection)
is still pending, and this fix from it (which wouldn't have been good
enough in its original form) wasn't committed.
A vmentry failure was reported to xen-devel, and debugging identified
this bug in its SingleStep + MovSS form by way of INT1, which does not
involve the use of any privileged instructions, and proving this to be a
security issue.
This is XSA-308
Reported-by: Håkon Alstadheim <hakon@alstadheim.priv.no>
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
These functions getting used with the 2nd and 3rd arguments being equal
wasn't well defined: Arm64 reliably returns the value of the 2nd
argument in this case, while on x86 for bitmaps up to 64 bits wide the
return value was undefined (due to the undefined behavior of a shift of
a value by the number of bits it's wide) when the incoming value was 64.
On Arm32 an actual out of bounds access would happen when the
size/offset value is a multiple of 32; if this access doesn't fault, the
return value would have been sufficiently correct afaict.
Make the functions consistently tolerate the last two arguments being
equal (and in fact the 3rd argument being greater or equal to the 2nd),
in favor of finding and fixing all the use sites that violate the
original more strict assumption.
This is XSA-307.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Julien Grall <julien@xen.org>
Jan Beulich
Steven Haigh
Andrew Cooper
Hongyan Xia
Yangtao Li
Nick Rosbrook
Paul Durrant
Igor Druzhinin
George Dunlap
Anthony PERARD
Juergen Gross