UPDATE_ENTRY/update_intpte always returns true since 1bc30c076a
"x86/mm: {paging, sh}_{cmpxchg, write}_guest_entry() cannot fault"
Signed-off-by: Kevin Lampis <kevin.lampis@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Zihintpause is in required_extensions[] so Xen panics when it is missing,
while it does not strictly require hardware support for it.
The PAUSE hint (Zihintpause extension) is encoded as FENCE W, 0
(0x0100000F). In accordance with the RISC-V Unprivileged ISA, HINTs are
encoded in the space of valid standard instructions. On platforms without
Zihintpause support, executing 0x0100000F is treated as a standard FENCE
with an empty successor set, which acts as a NOP and never generates an
illegal instruction trap.
Zihintpause is therefore purely an optimization hint. Drop it from
required_extensions[] so Xen can still boot on systems that don't advertise
it, and print a warning in that case.
Assisted-by: Claude:claude-opus-5
Signed-off-by: Baptiste Le Duc <baptiste.le-duc@vates.tech>
Reviewed-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Enable dom0less support for RISC-V by selecting HAS_DOM0LESS and
providing the minimal architecture hooks required by the common
dom0less infrastructure.
Add stub implementations for architecture-specific helpers used when
building domains from the device tree. These allow the generic
dom0less code to build and let a basic DomU be constructed on RISC-V.
construct_hwdom() and make_hypervisor_node() are still stubs returning
an error: Dom0/hwdom construction isn't supported yet, and the
hypervisor node generation (needed by domains with
DOM0LESS_ENHANCED_NO_XS set) is not implemented. Both are marked with
a TODO and are not reached by the currently supported configurations.
Provide missing helpers and definitions required by the domain
construction code, including domain bitness helpers and the
p2m_set_allocation() prototype.
Additionally define the guest magic memory region (GUEST_MAGIC_BASE /
GUEST_MAGIC_SIZE) in asm/guest-layout.h. The base is arbitrary; the
only constraint is that the region must not overlap guest RAM or the
emulated device regions. It is placed in the unused gap below
GUEST_RAM0_BASE (0x80000000); the constraints are documented next to
the #define-s.
A separate region for grant tables will be introduced at the same time as
the introduction of the grant table for RISC-V.
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Wire up the missing early-boot initialization steps in start_xen().
The scheduler must be initialized prior to do_initcalls() because
cpupool_create_pool() is called during initcalls; without it,
BUG_ON(IS_ERR(pool)) is triggered inside cpupool_create_pool().
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Implement init_intc_phandle() to read phandle of interrupt controller
node and save it in kernel->phandle_intc for the future usage during
creation of guest interrupt controller node.
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
dom0less device passthrough requires granting guest domains access to
device interrupts. Introduce map_device_irqs_to_domain() to enumerate
a DT node's interrupt properties, skipping those not owned by
the primary interrupt controller (as at the moment I haven't seen usages
of it), and map_irq_to_domain() to grant domain access and configure
Xen's interrupt descriptor accordingly. Sharing IRQ between domains is
rejected.
Both map_irq_to_domain() and map_device_irqs_to_domain() are marked
__overlay_init, mirroring Arm: without CONFIG_OVERLAY_DTB this expands to
__init, so the functions are init-only and need no XSM check; with
CONFIG_OVERLAY_DTB they become runtime-callable, but the only runtime
entry point is dt_overlay_domctl(), which performs the XSM checks at the
domctl layer. RISC-V does not wire up DT overlay yet, so today these are
strictly __init; if/when overlay support is added, the domctl-level XSM
gating must be added together with it, as on Arm.
route_irq_to_guest() and release_guest_irq() manage irq_desc ownership
for guest-assigned interrupts. Each assignment carries a small irq_guest
structure as irqaction::dev_id, recording the owning domain and virtual
IRQ number which is 1:1 mapped to physical IRQ number. A per-domain
vIRQ allocation bitmap (used_irqs in struct vintc), managed by
vintc_reserve_virq(), prevents the same vIRQ being claimed twice.
Host and guest interrupts may differ in some operations, EOI timing in
particular: a host IRQ is completed once Xen's handler runs, whereas a
passthrough IRQ must defer the physical completion until the guest issues
its own EOI, otherwise a still-asserted level line would immediately
retrigger and storm. Hence a separate guest hw_irq_controller instance,
aplic_guest_irq_type, rather than an alias of the host one.
Its callbacks are BUG_ON("unimplemented") for now. The only interrupt
controller configuration supported so far is APLIC in MSI mode together
with IMSIC, where guest interrupts are delivered by hardware straight to
the guest's interrupt file, bypassing do_IRQ() and thereby Xen entirely.
The _IRQ_GUEST branch in do_IRQ() is left as BUG() for the same reason.
Real callbacks, .end() in particular, become necessary once a platform
without direct IMSIC delivery has to be supported, where Xen traps the
interrupt and injects it into the guest itself.
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
TRACE_TIME() uses an initializer list and hence is covered by Misra C:2012
rule 13.1 ("Initializer lists shall not contain persistent side effects").
Use intermediate variables to address this.
In vcpu_yield() take the opportunity to rename the existing variable which
better would have been used already before.
In do_sched_op() extend the scope of and rename an existing variable. Use
both variables throughout the function. Also drop a pointless (and
slightly malformed, style-wise) cast there, and adjust to other one to by
style conformant.
No functional change intended.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
The file scoping restrictions were spelled out in the documentation comment,
but not enforced by the configuration.
Remove duplicated file tag asm_offsets while at it.
No functional change.
Suggested-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Nicola Vetrini <nicola.vetrini@bugseng.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
booting.txt listed only H, Zbb, Zihintpause and Svpbmt as required, while
required_extensions[] in cpufeature.c also checks for I, M, A, Zicsr,
Zifencei and, with CONFIG_RISCV_ISA_C=y, C. As the panic message printed
for a missing extension points to booting.txt, document the missing ones.
Also add a section pointing to riscv_isa_ext[] for the optional extensions
Xen recognises, and a comment above required_extensions[] to keep it in
sync with the document.
No functional change.
Suggested-by: Baptiste Le Duc <baptiste.le-duc@vates.tech>
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Signed-off-by: Baptiste Le Duc <baptiste.le-duc@vates.tech>
Acked-by: Jan Beulich <jbeulich@suse.com>
MISRA C Rule 5.5 states: "Identifiers shall be distinct from macro
names".
Update ECLAIR configuration to deviate identifier and macro name
clashes by specifying the macros that should be ignored.
This includes hypfs_alloc_dyndata(), where the real function takes
an allocation size and the same-named macro is a typed convenience
wrapper that expands calls using sizeof(type).
Update deviations.rst and rules.rst accordingly.
Signed-off-by: Dmytro Prokopchuk <dmytro_prokopchuk1@epam.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
nsvm_vmcb_prepare4vmexit() copies CR0, CR4 and EFER out of the shadow
VMCB, but Xen does not run L2 with L2's own values: svm_update_guest_cr()
ORs in HVM_CR4_HOST_MASK and, under shadow paging, CR0.PG|WP, and
svm_update_guest_efer() forces EFER.SVME. Hardware writes back what L2
ran with, so L1 reads Xen's bits back as L2's. Save the shadowed values
instead.
CR4 leaks CR4.MCE under HAP. EFER is observable on a VMRUN rejected for
SVME=0: L1 gets back a VMCB with the bit it deliberately cleared. CR0 is
a no-op today, since nested virt requires HAP, and is changed for
consistency.
Fixes: 9a779e4fc1 ("Implement SVM specific part for Nested Virtualization")
Assisted-by: Claude:claude-opus-5
Signed-off-by: Lin Liu <lin.liu01@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
The feature is already advertised in NVPID_CAP_BITS, yet the handling
in nvmx_handle_invvpid() was missing.
Fixes: aa1b9dfdff ("nEPT: Expose EPT & VPID capablities to L1 VMM")
Signed-off-by: Teddy Astie <teddy.astie@vates.tech>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Boot self-tests (also referred to as boot-time tests or power-on
self-tests) are intended to check that Xen has configured the hardware
correctly before bringing up any domains.
Introduce tests to confirm that, using a dedicated SGI (GIC_SGI_TEST):
1. A cpu can send the SGI to itself
2. A cpu can send the SGI to another specific CPU (CPU0)
3. A cpu can send the SGI to all the other CPUs
Each CPU counts the test SGIs it takes. A sender samples those counters
before sending and then waits for the count of every CPU it targeted to
change, which is how it tells that the SGI was really delivered. The
counters are never reset, so comparing against a sample rather than an
absolute value keeps concurrent senders from disturbing each other. The
snapshot is allocated rather than kept on the stack, as NR_CPUS can be
large enough for such an array to overflow it.
A test reports a failure by panic(), so Xen never continues on a
platform where SGI delivery is broken. When the tests pass, Xen carries
on booting normally.
Also introduce a config CONFIG_BOOT_SELFTEST which enables these
tests. It depends on DEBUG and is off unless explicitly enabled.
Also introduce a boolean command line parameter "gic-test", so that a
build with CONFIG_BOOT_SELFTEST enabled can be shipped but the tests
selected at boot. It is documented in
docs/misc/xen-command-line.pandoc.
In order to keep all the boot self-tests together in the binary, a
separate section "initcallboottest" is introduced. Tests are registered
using __initcallboottest() and run once on every CPU by
do_init_boottests(), bracketed by begin/end messages. They run before
any domain is created on the primary core, and before the idle loop is
entered on a secondary core.
Signed-off-by: Ayan Kumar Halder <ayan.kumar.halder@amd.com>
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Julien Grall <julien@xen.org>
Amazon EC2 bare metal instances have no UART at the legacy I/O port
0x3f8. Their only serial port is a 16550-compatible PCI device (vendor
0x1d0f, device 0x8250) with its registers in the MMIO space of BAR 0.
pci_uart_config() uses the default parameters for a device that is not
in uart_config[], and those only accept an I/O BAR, so "com1=...,pci"
cannot find this device. Add it, with the same layout that Linux uses
(commit 3bfd1300abfe ("serial: 8250_pci: Add Amazon PCI serial device
ID")): one port at the start of BAR 0, 1-byte registers, and the
default 1.8432MHz clock.
Assisted-by: Claude:claude-opus-5-5
Signed-off-by: Benjamin Leggett <benjamin@edera.io>
Acked-by: Jan Beulich <jbeulich@suse.com>
For the .p_paddr, .p_vaddr, and .sh_addr fields the image load base
(passed in by command line argument) also needs taking into account. It is
_not_ merely the delta between incoming PT_NOTE and PT_LOAD segments. (The
fields aren't really used anywhere, so this is largely a cosmetic issue;
static analysis tools may be affected, though.)
Fixes: a353cab905 ("build_id: Provide ld-embedded build-ids")
Reported-by: Barr Detwix <timotheecisnard@gmail.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
It's redundant with the struct pirq * being passed, and the vector field
in struct msi_desc wanting to be cleared can be derived from v (and hence
pi_desc) being NULL.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Roger Pau Monné <roger@xenproject.org>
msix_find() is a local helper, with all callers explicitly acquiring the
per-domain PCI r/w lock. The checking, which should never have included
the alternative of holding the global PCI devices lock, therefore is
pretty much pointless.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Roger Pau Monné <roger@xenproject.org>
AAM is defined in APM as
AH = (AL/10d)
AL = (AL mod 10d)
However, due to the order of operations, we're incorrectly computing it as
AL = (AL mod 10d)
AH = (AL/10d) = ((originalAL mod 10d)/10d) = 0
Fix it by reordering the operations to match what's defined in APM
and avoid the unexpected dependency between the 2 operations.
Fixes: 8993572b9c ("x86emul: fold/eliminate some local variables")
Signed-off-by: Teddy Astie <teddy.astie@vates.tech>
Reviewed-by: Andrew Cooper <andrew.cooper3@citix.com>
The last users of zlib for stubdoms have been removed.
Remove zlib from the stubdom build system, too.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
There is no user of libpci left in stubdoms.
Remove libpci from the stubdom build system.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Failing to mark Xen as Reserved in the E820 is catastrophic; RAM regions get
handed to the physical memory allocator for general use. Similarly, failure
to mark the boot modules as reserved is not going to result in a working
system.
Mark reserve_e820_ram() as __must_check, and panic() on failure. To avoid
opencoding the range in every caller, print a general failure message in
reserve_e820_ram().
Reported-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
... prior to making changes.
mtrr/main.c absolutely does not need to include asm/uaccess.h
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Rework detect_zen2_null_seg_behaviour() to use the new MSR infrastructure.
Zen2 doesn't have WRMSRNS so don't bother relaxing the write. All it will do
is insert a useless alternative.
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
These have been clean for a while already, without being marked so.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Roger Pau Monné <roger@xenproject.org>
Both arm<NN>/head.S and arm<NN>/mmu/head.S have a local symbol "fail".
Without a .file directive locals will be associated with the path-less
object filename (head.o). Hence the two symbol names collide. Add .file,
also in arm<NN>/mpu/head.S for consistency.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Michal Orzel <michal.orzel@amd.com>
check_pgtbl_mode_support() declares level_map_mask as bare `unsigned`, i.e.
a 32-bit type while it derives from a paddr_t which is in both RV32/RV64 a
64-bit type. Storing that value into a 32-bit local silently drops any set
bits above bit 31.
The mask is then used as:
aligned_load_start = load_start & level_map_mask;
load_start is `unsigned long` (64-bit on riscv64) and if it requires more
than 32 bits to represent, because load_start zero-extend to 64 bits, we
would drop some load_start's bits during the AND.
Widen level_map_mask to `unsigned long`, matching the width of the physical
address.
Fixes: e66003e7be ("xen/riscv: introduce setup_initial_pages")
Reported-by: Zheng Zhang <zhangzheng@iscas.ac.cn>
Signed-off-by: Baptiste Le Duc <baptiste.le-duc@vates.tech>
Tested-by: Zheng Zhang <zhangzheng@iscas.ac.cn>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
The existing SFENCE.VMA before the satp write only orders the page table
stores from setup_initial_pagetables() against subsequent implicit reads.
It does not prevent the CPU from speculatively caching translations after
the fence retires.
According to the RISC-V Privileged specification, implementations are
permitted to speculatively cache Bare-mode identity mappings. Furthermore,
selecting MODE=Bare (which happens during check_pgtbl_mode_support())
requires zeroing the remaining fields of satp, causing ASID=0 to be
actively used in Bare mode. Consequently, the TLB can be polluted with Bare
identity mappings tagged with ASID=0.
Once satp is written to enable Sv39 translation, these cached identity
mappings (tagged with ASID=0) can shadow the true Sv39 translations. This
would lead to translation failures since turn_on_mmu() jumps to a
non-identity-mapped linker address.
Fix this by adding a post-satp-write SFENCE.VMA to invalidate any stale
translations (including Bare-mode identity mappings under ASID=0) before
jumping to the virtual address space.
Assisted-by: Claude:claude-opus-5
Signed-off-by: Baptiste Le Duc <baptiste.le-duc@vates.tech>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
The radix tree holding struct pirq * as obtained by pirq_get_info() is
protected by the domain's event lock. The result ("info") and the derived
"pirq_dpci" therefore may not be de-referenced past the dropping of that
lock. Moving the unlock down is safe, but perhaps not obviously so:
- vector_hashing_dest() does a memory allocation, but core event channel
code does so too while holding the lock; the call to
vlapic_match_dest() doesn't involve any further locking,
- hvm_migrate_pirq() operates on the corresponding IRQ descriptor, where
obtaining of its lock is of course fine (those locks always nest inside
the event lock),
- {hvm,vmx}_pi_update_irte() are very similar to hvm_migrate_pirq()
locking-wise,
- the locking around guest_mask_msi_irq() is the same as in the earlier
two bullet points.
As long as the PCI-devs lock is held around both
pt_irq_{create,destroy}_bind(), this is only a latent issue.
Fixes: 35a1caf8b6 ("pass-through: update IRTE according to guest interrupt config changes")
Fixes: 1066331913 ("passthrough: don't migrate pirq when it is delivered through VT-d PI")
Fixes: 782cf8ba46 ("pass-through: adjust pIRQ migration")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Roger Pau Monné <roger@xenproject.org>
A recent 4.22 randconfig build job hit a situation where (LIVEPATCH=n,
i.e. --all-symbols not specified) both __note_gnu_build_id_end and
_erodata aliased _sinittext on the 1st linking pass, but they didn't on
the 2nd one. As a result two fewer symbols were emitted on the 2nd pass,
causing $(call compare-symbol-tables, ...) to fail.
Extend the existing "corner case" by also considering aliases with
_sinittext (_stext really shouldn't have anything ahead of it), but
discard only non-text symbols.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Roger Pau Monné <roger@xenproject.org>
We're only about 18.5 years late with this: See Linux commit a3b81113fb66
("remove support for un-needed _extratext section"), i.e. from the 2.6.25
dev cycle.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Roger Pau Monné <roger@xenproject.org>
Otherwise the function is unreachable, violating MISRA C:2012 rule 2.1.
With the function compiled out, its dedicated XSM hook also becomes
unreachable, so it is similarly guarded.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Daniel P. Smith <dpsmith@apertussolutions.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
The last Mini-OS use case of libxenguest is gone, so remove the
Mini-OS specific parts of libxenguest.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
HVM guests cannot run without either HAP or shadow enabled. While
paging_mode_shadow() is compile-time-constant when SHADOW_PAGING=n,
paging_mode_hap() isn't. Hence the former is preferred to leverage DCE.
In svm_update_guest_cr() combine two adjacent conditionals.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Alejandro Vallejo <alejandro.garciavallejo@amd.com>
Acked-by: Roger Pau Monné <roger@xenproject.org>
The patch in Fixes adjusted two vendor variables from uint8_t and plain
int to to unsigned int. But they were both used later in printks with
the %d specifier rather than %u. Adjust accordingly.
Fixes: 39a9a49449 ("x86: Remove x86 prefixed names from x86/cpu/ files")
Signed-off-by: Alejandro Vallejo <alejandro.garciavallejo@amd.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
On hardware that supports TDX, guests can cause VMEXIT related to
TDX instructions (SEAMCALL and TDCALL) regardless of VMCS configuration.
Currently, that causes the domain to crash when a domain tries to
use these instructions in kernel-mode, and emit #UD when used in user-mode.
Adjust the behavior so that the guest always gets #UD when trying to
use these instructions regardless of the privilege level that the vCPU
is running.
In the nested virtualization case, also reinject the exit reason to L1
rather than failing on "Unhandled nested vmexit" (leading to a L1 crash
that can be caused by L2 by executing one of the TDX instructions).
Signed-off-by: Teddy Astie <teddy.astie@vates.tech>
Acked-by: Jan Beulich <jbeulich@suse.com>
With the final linking logic now consolidated in scripts/Makefile.link,
$(compare-symbol-tables) also doesn't need setting anymore in
Kbuild.include.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
With the final linking logic now consolidated in scripts/Makefile.link,
$(all-symbols-*) also doesn't need setting anymore in (and passing down
from) the top level Makefile.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
Doing so, besides (hopefully) adding clarity (not the least by way of
[re-]using pattern rules where possible), also avoids explicit recursive
$(MAKE) invocations.
By re-using the generic rules introduced when the respective x86 rule was
split,
- the .map file now isn't created after the final binary anymore,
- --strip-debug is passed to $(LD) during early linking passes (for
consistency the option is also explicitly added to the optional linking
pass rule),
- CONFIG_{SUPPRESS_DUPLICATE_SYMBOL_WARNINGS,ENFORCE_UNIQUE_SYMBOLS} are
now properly respected.
Orphan section checking, otoh, is getting suppressed for now, until the
about a dozen warnings which would result have been taken care of.
While the 4th linking step continues to be avoided when possible, a
redundant invocation of $(NM) and tools/symbols (plus the assembling of
the resulting .S file) is hopefully deemed acceptable.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Doing so, besides (hopefully) adding clarity (not the least by way of
[re-]using pattern rules where possible), also avoids explicit recursive
$(MAKE) invocations.
By re-using the generic rules introduced when the respective x86 rule was
split,
- the .map file now isn't created after the final binary anymore,
- --strip-debug is passed to $(LD) during early linking passes (for
consistency the option is also explicitly added to the optional linking
pass rule),
- CONFIG_{SUPPRESS_DUPLICATE_SYMBOL_WARNINGS,ENFORCE_UNIQUE_SYMBOLS} are
now properly respected.
Orphan section checking and erroring on duplicate symbols, otoh, are
getting suppressed for now, until the about a dozen orphan section
warnings and the one duplicate symbol error which would result have been
taken care of.
While the 4th linking step continues to be avoided when possible, a
redundant invocation of $(NM) and tools/symbols (plus the assembling of
the resulting .S file) is hopefully deemed acceptable.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
Acked-by: Michal Orzel <michal.orzel@amd.com>
Compound literals are also covered by Misra C:2012 rule 13.1
("Initializer lists shall not contain persistent side effects"), and
(sadly?) that rule also applies to lists with just a single element, or
more generally with just a single side effect. Use intermediate variables
to overcome this.
No functional change intended.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Michal Orzel <michal.orzel@amd.com>
Compound literals are also covered by Misra C:2012 rule 13.1
("Initializer lists shall not contain persistent side effects"), and
(sadly?) that rule also applies to lists with just a single element, or
more generally with just a single side effect. Use intermediate variables
to overcome this as well as ACCESS_ONCE()'s restriction to be usable on
scalar types only.
No functional change intended.
Fixes: 0345b835dc ("x86/pagewalk: Read guest PTEs with ACCESS_ONCE()")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Roger Pau Monné <roger@xenproject.org>
Kevin Lampis