The dirty_cpu field of struct vcpu denotes which cpu still holds data
of a vcpu. All accesses to this field should be atomic in case the
vcpu could just be running, as it is accessed without any lock held
in most cases. Especially sync_local_execstate() and context_switch()
for the same vcpu running concurrently have a risk for failing.
There are some instances where accesses are not atomically done, and
even worse where multiple accesses are done when a single one would
be mandated.
Correct that in order to avoid potential problems.
Add some assertions to verify dirty_cpu is handled properly.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
With support of core scheduling sched_unit_migrate_finish() gained a
call of sync_vcpu_execstate() as it was believed to be called as a
result of vcpu migration in any case.
In case of migrating a vcpu away from a physical cpu for a short period
of time but without ever being scheduled on the selected new cpu, this
might not be true so drop the call and let the lazy state syncing do its
job.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Dario Faggioli <dfaggioli@suse.com>
Add entries for the relevant changes I've been working on during the
4.14 development time frame. Mostly performance improvements related
to pvshim scalability issues when running with high number of vCPUs.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Paul Durrant <paul@xen.org>
This resolves the following observed error during config merge:
/bin/sh /path/to/xen/xen/../xen/tools/kconfig/merge_config.sh -m .config /path/to/xen/xen/../xen/arch/arm/configs/custom.config
Using .config as base
Merging /path/to/xen/xen/../xen/arch/arm/configs/custom.config
#
# merged configuration written to .config (needs make)
#
make -f /path/to/xen/xen/../xen/Makefile olddefconfig
make[2]: Entering directory '/path/to/xen/xen'
make[2]: *** No rule to make target 'olddefconfig'. Stop.
make[2]: Leaving directory '/path/to/xen/xen'
tools/kconfig/Makefile:95: recipe for target 'custom.config' failed
The build was invoked by first doing a defconfig (which succeeded):
$ make -C xen XEN_TARGET_ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- defconfig
Followed by the config fragment merge command (which failed before this patch)
$ cat > xen/arch/arm/configs/custom.config <<EOF
CONFIG_DEBUG=y
CONFIG_EARLY_PRINTK_ZYNQMP=y
EOF
$ make -C xen XEN_TARGET_ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- custom.config
Signed-off-by: Stewart Hildebrand <stewart.hildebrand@dornerworks.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
The macro version UNMAP_DOMAIN_PAGE() does both NULL checking and
variable clearing. Move NULL checking into the function itself so that
the semantics is consistent with other similar constructs like XFREE().
This also eases the use unmap_domain_page() in error handling paths,
where we only care about NULL checking but not about variable clearing.
Signed-off-by: Hongyan Xia <hongyxia@amazon.com>
Reviewed-by: Wei Liu <wl@xen.org>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Julien Grall <jgrall@amazon.com>
This resolves the following observed error:
/bin/sh: /path/to/xen/xen/../xen/scripts/kconfig/merge_config.sh: No such file or directory
Signed-off-by: Stewart Hildebrand <stewart.hildebrand@dornerworks.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
While from just a single Skylake system it is already clear that we
can't base any of our logic on CPUID leaf 15 [1] (leaf 16 is
documented to be used for display purposes only anyway), logging this
information may still give us some reference in case of problems as well
as for future work. Additionally on the AMD side it is unclear whether
the deviation between reported and measured frequencies is because of us
not doing well, or because of nominal and actual frequencies being quite
far apart.
The chosen variable naming in amd_log_freq() has pointed out a naming
problem in rdmsr_safe(), which is being taken care of at the same time.
Symmetrically wrmsr_safe(), being an inline function, also gets an
unnecessary underscore dropped from one of its local variables.
[1] With a core crystal clock of 24MHz and a ratio of 216/2, the
reported frequency nevertheless is 2600MHz, rather than the to be
expected (and calibrated by both us and Linux) 2592MHz.
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
There's nothing to be done by the emulator, as we unconditionally abort
any XBEGIN.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
With RCU barriers moved from tasklets to normal RCU processing cpu
offlining in core scheduling might deadlock due to cpu synchronization
required by RCU processing and core scheduling concurrently.
Fix that by bailing out from core scheduling synchronization in case
of pending RCU work. Additionally the RCU softirq is now required to
be of higher priority than the scheduling softirqs in order to do
RCU processing before entering the scheduler again, as bailing out from
the core scheduling synchronization requires to raise another softirq
SCHED_SLAVE, which would bypass RCU processing again.
Reported-by: Sergey Dyasli <sergey.dyasli@citrix.com>
Tested-by: Sergey Dyasli <sergey.dyasli@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Dario Faggioli <dfaggioli@suse.com>
While full checking is impossible (as the lock is being acquired/
released down the call tree), perform at least a lock level check.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Communicating errors from p2m_set_entry() to the caller is not enough:
Neither the M2P nor the stats updates should occur in such a case.
Instead the allocated page needs to be freed again; for cleanliness
reasons also properly take into account _PGC_allocated there.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
The condition of the second can be true only if the condition of the
first was met; the second half of the condition of the second then also
is redundant with an earlier check. Combine them, drop a pointless
local variable, and take the liberty to drop the affected gdprintk()
altogether, as we don't normally log anything on -EFAULT paths.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Allow lowercase a/s/h to be used to annotate a non-default feature.
However, until the toolstack migration logic is fixed, it is not safe to
activate yet. Tolerate the annotations, but ignore them for now.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
All CPUs get an equal setting of EOI broadcast suppression; no need to
log one message per CPU, even if it's only in verbose APIC mode.
Only the BSP is eligible to possibly get ExtINT enabled; no need to log
that it gets disabled on all APs, even if - again - it's only in verbose
APIC mode.
Take the opportunity and introduce a "bsp" parameter to the function, to
stop using smp_processor_id() to tell BSP from APs. No functional change
from this.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
EXPERT mode is currently used to gate any options that are in technical
preview or not security supported. At the moment, this is selected by
adding XEN_CONFIG_EXPERT=y on the make command line, or to the
(currently undocumented) top-level .config file.
This makes the option very unintuitive to use: If the user forgets to
add the option when (re)building or when using menuconfig, then
xen/.config will be silently rewritten, leading to behavior which is
very difficult to diagnose. Adding XEN_CONFIG_EXPERT=y to the
top-level .config is not obvious behavior, particularly as the file is
undocumented.
A lot of the options behind EXPERT would benefit from being more
accessible so users can experiment with them and voice any concerns
before they are fully supported.
To make this option more discoverable and consistent to use, make it
possible to select it from the menuconfig.
This doesn't change the fact a Xen with EXPERT mode selected will not
be security supported.
Signed-off-by: Julien Grall <jgrall@amazon.com>
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Since commit f80fe2b34f "xen: Update Kconfig to Linux v5.4" EXPERT
can only have two values (enabled or disabled). So switch from a string
to a bool.
Take the opportunity to replace all "EXPERT = y" to "EXPERT" and use
squash the lines bool and prompt together in modified place.
Signed-off-by: Julien Grall <jgrall@amazon.com>
Acked-by: Dario Faggioli <dfaggioli@suse.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Jan Beulich <jbeulich@suse.com>
The XS_INTRODUCE command has two parameters: the mfn (or better: gfn)
of the domain's xenstore ring page and the event channel of the
domain for communicating with Xenstore.
The gfn is not really needed. It is stored in the per-domain struct
in xenstored and in case of another XS_INTRODUCE for the domain it
is tested to match the original value. If it doesn't match the
command is aborted via EINVAL, otherwise the event channel to the
domain is recreated.
As XS_INTRODUCE is limited to dom0 and there is no real downside of
recreating the event channel just omit the test for the gfn to
match and don't return EINVAL for multiple XS_INTRODUCE calls.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
Acked-by: Wei Liu <wl@xen.org>
The op has a "is reserved" flag, and hence registration shouldn't
happen unilaterally.
Fixes: eb3dd90e40 ("x86/physdev: enable PHYSDEVOP_pci_mmcfg_reserved for PVH Dom0")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Xen doesn't support CET-IBT yet. At a minimum, logic is required to enable it
for supervisor use, but the livepatch functionality needs to learn not to
overwrite ENDBR64 instructions.
Furthermore, Ubuntu enables -fcf-protection by default, along with a buggy
version of GCC-9 which objects to it in combination with
-mindirect-branch=thunk-extern (Fixed in GCC 10, 9.4).
Various objects (Xen boot path, Rombios 32 stubs) require .text to be at the
beginning of the object. These paths explode when .note.gnu.properties gets
put ahead of .text and we end up executing the notes data.
Disable -fcf-protection for all embedded objects.
Reported-by: Jason Andryuk <jandryuk@gmail.com>
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jason Andryuk <jandryuk@gmail.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Users of EMBEDDED_EXTRA_CFLAGS already use -fno-asynchronous-unwind-tables, or
ought to. This shrinks the size of the rombios 32bit stubs in guest memory.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Linkers may put orphaned sections ahead of .text, which breaks the calling
requirements. A concrete example is Ubuntu's GCC-9 default of enabling
-fcf-protection which causes us to try and execute .note.gnu.properties during
Xen's boot.
Put .got.plt in its own section as it specifically needs preserving from the
linkers point of view, and discard everything else. This will hopefully be
more robust to other unexpected toolchain properties.
Fixes boot from an Ubuntu build of Xen.
Reported-by: Jason Andryuk <jandryuk@gmail.com>
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Tested-by: Jason Andryuk <jandryuk@gmail.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
GAS of at least version 2.34 complains:
hypercall_page.S: Assembler messages:
hypercall_page.S:24: Warning: symbol 'HYPERCALL_set_trap_table' already has its type set
...
hypercall_page.S:71: Warning: symbol 'HYPERCALL_arch_7' already has its type set
which is because the whole page is declared as STT_OBJECT already. Rearrange
.set with respect to .type in DECLARE_HYPERCALL() so STT_FUNC is already in
place.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
This prevents syntax highlighting from believing the rest of the file is a
string.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Julien Grall <jgrall@amazon.com>
xc_cpuid_apply_policy() is gaining extra parameters to untangle CPUID
complexity in Xen. While an improvement in general, it does have the
unfortunate side effect of duplicating some settings across multiple
parameters.
Rearrange the logic to only consider 'pae' if no explicit featureset is
provided. This reduces the complexity for callers who have already provided a
pae setting in the featureset.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Paul Durrant <pdurrant@amzn.com>
Acked-by: Wei Liu <wl@xen.org>
Add a README and package comment giving a brief overview of the package.
These also help pkg.go.dev generate better documentation.
Also, add a copy of the LGPL (the same license used by libxl) to
tools/golang/xenlight. This is required for the package to be shown
on pkg.go.dev and added to the default module proxy, proxy.golang.org.
Finally, add an entry for the xenlight package to SUPPORT.md.
Signed-off-by: Nick Rosbrook <rosbrookn@ainfosec.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
Initialize the xenlight Go module using the xenbits git-http URL,
xenbits.xenproject.org/git-http/xen.git/tools/golang/xenlight.
Also simplify the build Make target by using `go build` instead of `go
install`, and do not set GOPATH here because it is now unnecessary.
Signed-off-by: Nick Rosbrook <rosbrookn@ainfosec.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
Commit df669de074 un-tracked the generated
Go code, but it was decided that we actually keep the generated code
in-tree.
Undo the changes to ignore the generated code, and re-generate it.
Signed-off-by: Nick Rosbrook <rosbrookn@ainfosec.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
Many exported functions in xenlight require a domid as an argument. Make
it easier for package users to use these functions by adding wrappers
for the libxl utility functions libxl_name_to_domid and
libxl_domid_to_name.
Signed-off-by: Nick Rosbrook <rosbrookn@ainfosec.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
... to specify a separate migration stream that will also be suitable for
live update.
The original scope of the document was to support non-cooperative migration
of guests [1] but, since then, live update of xenstored has been brought into
scope. Thus it makes more sense to define a separate image format for
serializing xenstore state that is suitable for both purposes.
The document has been limited to specifying a new image format. The mechanism
for acquiring the image for live update or migration is not covered as that
is more appropriately dealt with by a patch to docs/misc/xenstore.txt. It is
also expected that, when the first implementation of live update or migration
making use of this specification is committed, that the document is moved from
docs/designs into docs/specs.
NOTE: It will only be necessary to save and restore state for active xenstore
connections, but the documentation for 'RESUME' in xenstore.txt implies
otherwise. That command is unused so this patch deletes it from the
specification.
[1] See https://xenbits.xen.org/gitweb/?p=xen.git;a=blob;f=docs/designs/non-cooperative-migration.md
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Julien Grall <jgrall@amazon.com>
At the moment, write_atomic() will happily write to a pointer to const.
While there are no use in Xen, it would be best to catch them at
compilation time.
Signed-off-by: Julien Grall <jgrall@amazon.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
The current implementation of write_atomic has two issues:
1) It cannot be used to write pointer value because the switch
contains cast to other size than the size of the pointer.
2) It will happily allow to write to a pointer to const.
Additionally, the Arm implementation is returning a value when the x86
implementation does not anymore. This was introduced in commit
2934148a07 "x86: simplify a few macros / inline functions". There are
no users of the return value, so it is fine to drop it.
The switch is now moved in a static inline helper allowing the compiler
to prevent use of const pointer and also allow to write pointer value.
Signed-off-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
The current implementation of read_atomic() on Arm will not allow to:
1) Read a value from a pointer to const because the temporary
variable will be const and therefore it is not possible to assign
any value. This can be solved by using a union between the type and
a char[0].
2) Read a pointer value (e.g void *) because the switch contains
cast from other type than the size of a pointer. This can be solved by
by introducing a static inline for the switch and use void * for the
pointer.
Reported-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
After XSA-273, it is not possible to modify the vCPU soft affinity using
xl vcpu-pin without modifying the hard affinity. Instead the command
will crash.
42sh> gdb /usr/local/sbin/xl
(gdb) r vcpu-pin 0 0 - 10
[...]
Program received signal SIGSEGV, Segmentation fault.
[...]
(gdb) bt
This is happening because 'xl' will use NULL when an affinity doesn't
need to be modified. However, we will still try to apply the global
affinity in the this case.
As the hard affinity is not changed, then we don't need to apply the
global affinity. So skip it when hard is NULL.
Backport: 4.6+ # Any release with XSA-273
Fixes: aa67b97ed3 ("xl.conf: Add global affinity masks")
Reported-by: Pawel Wieczorkiewicz <wipawel@amazon.de>
Signed-off-by: Julien Grall <jgrall@amazon.com>
Acked-by: Wei Liu <wl@xen.org>
Clang 10 complains with:
13: error: misleading indentation; statement is not part of the previous 'if'
[-Werror,-Wmisleading-indentation]
if ( ! yyg->yy_state_buf )
^
libxlu_disk_l.c:1259:9: note: previous statement is here
if ( ! yyg->yy_state_buf )
^
Due to the missing braces in single line statements and the wrong
indentation. Fix this by disabling the warning for that specific file.
I haven't found a way to force flex to add braces around single line
statements in conditional blocks.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
[ wei: regenerate output files ]
Acked-by: Wei Liu <wl@xen.org>
credit2 is currently modifying the pause flags of vcpus non-atomically
via sched_set_pause_flags() and sched_clear_pause_flags(). This is
dangerous as there are cases where the paus flags are modified without
any lock held.
So drop the non-atomic pause flag modification functions and rename the
atomic ones dropping the _atomic suffix.
Fixes: a76255b426 ("xen/sched: make credit2 scheduler vcpu agnostic.")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Dario Faggioli <dfaggioli@suse.com>
Commit cb563d7665 ("xen/sched: support core scheduling for moving
cpus to/from cpupools") introduced a regression when trying to remove
an offline cpu from a cpupool, as the system would crash in this
situation.
Fix that by testing the cpu to be online.
Fixes: cb563d7665 ("xen/sched: support core scheduling for moving cpus to/from cpupools")
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Dario Faggioli <dfaggioli@suse.com>
Currently it might be not obvious which scheduling mode (e.g. core-
scheduling) is being used by the scheduler. Alleviate this by printing
additional information about the selected granularity per-cpupool.
Note: per-cpupool granularity selection is not implemented yet. Every
cpupool gets its granularity from the single global value.
Take this opportunity to introduce struct sched_gran_name array and
refactor sched_select_granularity().
Signed-off-by: Sergey Dyasli <sergey.dyasli@citrix.com>
Acked-by: Dario Faggioli <dfaggioli@suse.com>
AMD Fam15h processors introduced the flush-by-asid feature, for more fine
grain flushing purposes.
Flushing everything including ASID 0 (i.e. Xen context) is an an unnecesserily
large hammer, and never necessary in the context of guest TLBs needing
invalidating.
When available, use TLB_CTRL_FLUSH_ASID in preference to TLB_CTRL_FLUSH_ALL.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Rework the vmcbcleanbits_t definitons to use bool, drop 'fields' from the
namespace, position the comments in an unambiguous position, and include the
bit position.
In svm_vmexit_handler(), don't bother conditionally writing ~0 or 0 based on
hardware support. The field was entirely unused and ignored on older
hardware (and we're already setting reserved cleanbits anyway).
In nsvm_vmcb_prepare4vmrun(), simplify the logic massively by dropping the
vcleanbit_set() macro using a vmcbcleanbits_t local variable which only gets
filled in the case that clean bits were valid previously. Fix up the style on
impacted lines.
No practical change in behaviour.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Recent changes no longer allow modification of AFLAGS. The needed
conversion was apparently missed in 2740d96efd ("xen/build: have the
root Makefile generates the CFLAGS").
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Julien Grall <jgrall@amazon.com>
First of all avoid excessive conversions. copy_{from,to}_guest(), for
example, work fine with all of XEN_GUEST_HANDLE{,_64,_PARAM}().
Further
- do_physdev_op_compat() didn't use the param form for its parameter,
- {hap,shadow}_track_dirty_vram() wrongly used the param form,
- compat processor Px logic failed to check compatibility of native and
compat structures not further converted.
As this eliminates all users of guest_handle_from_param() and as there's
no real need to allow for conversions in both directions, drop the
macros as well.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Julien Grall <jgrall@amazon.com>
The path provided by EXTRA_PREFIX should be added to the search path
of the configure script, like it's done in Config.mk. Not doing so
makes the search path for configure differ from the search path used
by the build.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
[ wei: run autogen.sh ]
Acked-by: Wei Liu <wl@xen.org>
The value returned from CPUID is the maximum number for virtual
processors supported by Hyper-V. It could be larger than the maximum
number of virtual processors configured.
Stash the configured number into a variable and use it in calculations.
Signed-off-by: Wei Liu <liuwe@microsoft.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
To fix CPUID handling, libxl__build_pre() is going to have to distinguish
between a brand new VM vs one which is being migrated-in/resumed.
Transcribe dcs->restore_fd into dbs->restore in initiate_domain_create()
only (specifically avoiding the stubdom state in libxl__spawn_stub_dm()).
While tweaking initiate_domain_create(), make a new dbs alias and simplify
later code, and drop the local restore_fd alias as the new dbs->restore is
more intuitive in context.
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Updating microcode is less error prone when caches have been flushed and
depending on what exactly the microcode is updating. For example, some of the
issues around certain Broadwell parts can be addressed by doing a full cache
flush.
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
[Linux commit 91df9fdf51492aec9fed6b4cbd33160886740f47, ported to Xen]
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
This allows the AP boot assembly use per-cpu variables, and brings the
semantics closer to that of the BSP, which can use per-cpu variables from the
start of day.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Wei Liu