The code in free_heap_pages() will try to merge pages with the
successor/predecessor if pages are suitably aligned. So if the pages
reserved are right next to the pages given to the heap allocator,
free_heap_pages() will merge them, and give the reserved pages to heap
allocator accidentally as a result.
So in order to avoid the above scenario, this commit updates free_heap_pages()
to check whether the predecessor and/or successor has PGC_static set,
when trying to merge the about-to-be-freed chunk with the predecessor
and/or successor.
Suggested-by: Julien Grall <jgrall@amazon.com>
Signed-off-by: Penny Zheng <penny.zheng@arm.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
When devices are deassigned/assigned, SMMU global fault is observed
because SMEs are freed in detach function and not allocated again when
the device is assigned back to the guest.
Don't free the SMEs when devices are deassigned, set the s2cr to type
fault. This way the SMMU will generate a fault if a DMA access is done
by a device not assigned to a guest.
Remove the arm_smmu_master_free_smes() as this is not needed anymore,
arm_smmu_write_s2cr() will be used to set the s2cr to type fault.
Fixes: 0435784cc7 ("xen/arm: smmuv1: Intelligent SMR allocation")
Signed-off-by: Rahul Singh <rahul.singh@arm.com>
Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
arch_domain_create() can't blindly write into d->arch.hvm union. Move the
logic into hvm_domain_initialise(), which involves passing config down.
Fixes: 2ce11ce249 ("x86/HVM: allow per-domain usage of hardware virtualized APIC")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
early_page_fault() needs to outside of #ifdef CONFIG_PV
Spotted by Gitlab CI.
Fixes: fe3f50726e ("x86/entry: move .init.text section higher up in the code for readability")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
In macro __rb_parent(), add parentheses around the macro parameter to prevent
against unintended expansions.
Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
In macros ELF32_ST_TYPE() and ELF64_ST_TYPE(), add parentheses around the
macro parameter to prevent against unintended expansions.
Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
"int" is not a suitable type to convert time()'s return value to. Avoid
casts and other extra fiddling by using difftime(), on the assumption
that the overhead of using "double" doesn't matter here.
Coverity ID: 1509374
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Use $(TARGETS) to collect targets. Use := for the first target instead
of +=.
Collect library to link against in $(LDLIBS).
Remove extra "-f" flags that is already part of $(RM).
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Luca Fancellu <luca.fancellu@arm.com>
Tested-by: Luca Fancellu <luca.fancellu@arm.com>
This can be used when linking against multiple in-tree Xen libraries,
and avoid duplicated flags. It can be used instead of multiple
$(LDLIBS_libxen*).
For now, replace the open-coding in libs.mk.
The macro $(xenlibs-libs, ) will be useful later when only the path to
the libraries is wanted (e.g. for checking for dependencies).
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
This patch introduce a new macro $(xenlibs-dependencies,) to generate
a list of all the xen library that a library is list against, and they
are listed only once. We use the side effect of $(sort ) which remove
duplicates.
This is used by another macro $(xenlibs-rpath,) which is to replace
$(SHDEPS_libxen*).
In libs.mk, we don't need to $(sort ) SHLIB_lib* anymore as this was used
to remove duplicates and they are no more duplicates.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
The function arch_set_info_guest is not reached anymore through
VCPUOP_initialise on arm, update the comment.
Signed-off-by: Luca Fancellu <luca.fancellu@arm.com>
Acked-by: Julien Grall <jgrall@amazon.com>
Expose VIRT_SSBD to guests if the hardware supports setting SSBD in
the LS_CFG MSR (a.k.a. non-architectural way). Different AMD CPU
families use different bits in LS_CFG, so exposing VIRT_SPEC_CTRL.SSBD
allows for an unified way of exposing SSBD support to guests on AMD
hardware that's compatible migration wise, regardless of what
underlying mechanism is used to set SSBD.
Note that on AMD Family 17h and Hygon Family 18h processors the value
of SSBD in LS_CFG is shared between threads on the same core, so
there's extra logic in order to synchronize the value and have SSBD
set as long as one of the threads in the core requires it to be set.
Such logic also requires extra storage for each thread state, which is
allocated at initialization time.
Do the context switching of the SSBD selection in LS_CFG between
hypervisor and guest in the same handler that's already used to switch
the value of VIRT_SPEC_CTRL.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Henry Wang <Henry.Wang@arm.com>
Re-commited with a tag removed.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Allow HVM guests access to MSR_VIRT_SPEC_CTRL if the platform Xen is
running on has support for it. This requires adding logic in the
vm{entry,exit} paths for SVM in order to context switch between the
hypervisor value and the guest one. The added handlers for context
switch will also be used for the legacy SSBD support.
Introduce a new synthetic feature leaf (X86_FEATURE_VIRT_SC_MSR_HVM)
to signal whether VIRT_SPEC_CTRL needs to be handled on guest
vm{entry,exit}.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Re-commited with a tag removed.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Use the logic to set shadow SPEC_CTRL values in order to implement
support for VIRT_SPEC_CTRL (signaled by VIRT_SSBD CPUID flag) for HVM
guests. This includes using the spec_ctrl vCPU MSR variable to store
the guest set value of VIRT_SPEC_CTRL.SSBD, which will be OR'ed with
any SPEC_CTRL values being set by the guest.
On hardware having SPEC_CTRL VIRT_SPEC_CTRL will not be offered by
default to guests. VIRT_SPEC_CTRL will only be part of the max CPUID
policy so it can be enabled for compatibility purposes.
Use '!' to annotate the feature in order to express that the presence
of the bit is not directly tied to its value in the host policy.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Re-commited with a tag removed.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
A person tagged in commit ebaaa72ee0
claims the tag is in accurate; revert this commit so that we can
re-commit it again with the tag corrected.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
A person tagged in commit a2eeaa6906
claims the tag is in accurate; revert this commit so that we can
re-commit it again with the tag corrected.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
A person tagged in commit 646589ac14
claims the tag is in accurate; revert this commit so that we can
re-commit it again with the tag corrected.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
"int" is not a suitable type to hold / receive "time_t" values.
The parameter is presently unused, so no functional change.
Coverity ID: 1509377
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
"int" is not a suitable type to hold time()'s return value.
Coverity ID: 1509376
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
The initial observation were duplicate symbols that our checking warns
about. Instead of merely renaming one or both pair(s) of symbols,
reduce #ifdef-ary at the same time by moving the instantiation of the
arrays into a macro. While doing the conversion also stop open-coding
array_access_nospec().
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
.init.text is a small section currently located amongst .text.entry
code. Move it above .text.entry.
This has no functional change but makes the code a bit more readable.
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Jane Malalane <jane.malalane@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
For guests in shadow mode the P2M table gets used only by software. The
only place where it matters whether superpages in the P2M can be dealt
with is sh_unshadow_for_p2m_change(): The table is never made accessible
to hardware for address translation, and the only checks of _PAGE_PSE in
P2M entries in shadow code are in this function (all others are against
guest page table entries). That function has been capable of handling
them even before commit 0ca1669871 ("P2M: check whether hap mode is
enabled before using 2mb pages") disabled 2M use in this case for
dubious reasons ("potential errors when hap is disabled").
While doing this, move "order" into more narrow scope and replace the
local variable "d" by a new "hap" one.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Tim Deegan <tim@xen.org>
In preparation for reactivating the presently dead 2M page path of the
function, also deal with the case of replacing an L1 page table all in
one go. Note that the prior comparing of MFNs to bypass the removal of
shadows was insufficient (but kind of benign, for being dead code so
far) - at the very least the R/W bit also needs considering there (to be
on the safe side, compare the full [virtual] PTEs).
While adjusting the first conditional in the loop for the use of the new
local variable "nflags", also drop mfn_valid(): If anything we'd need to
compare against INVALID_MFN, but that won't come out of l1e_get_mfn().
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Tim Deegan <tim@xen.org>
Pull common checks out of the switch(). This includes extending a
_PAGE_PRESENT check to L1 as well, which presumably was deemed redundant
with p2m_is_valid() || p2m_is_grant(), but I think we are better off
being explicit in all cases. Note that for L2 (or higher) the grant
check isn't strictly necessary, as grants are only ever single pages.
Leave a respective assertion.
With _PAGE_PRESENT checked uniformly, the suspicious mfn_valid(omfn)
checks can be dropped rather than moved/folded - if anything we'd need
to compare against INVALID_MFN, but that won't come out of l1e_get_mfn().
For L1 replace the moved out condition with a PTE comparison: There's
no need for any update or flushing when the two match.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Tim Deegan <tim@xen.org>
Replace a p2m_is_ram() check in the 2M case by an explicit _PAGE_PRESENT
one, to make more obvious that the subsequent l1e_get_mfn() actually
retrieves something that really is an MFN. It doesn't really matter
whether it's RAM, as the subsequent comparison with the original MFN is
going to lead to zapping of everything except the "same MFN again" case.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Tim Deegan <tim@xen.org>
-soundhw is deprecated since 825ff02911c9 ("audio: add soundhw
deprecation notice"), QEMU v5.1, and is been remove for upcoming v7.1
by 039a68373c45 ("introduce -audio as a replacement for -soundhw").
Instead we can just add the sound card with "-device", for most option
that "-soundhw" could handle. "-device" is an option that existed
before QEMU 1.0, and could already be used to add audio hardware.
The list of possible option for libxl's "soundhw" is taken the list
from QEMU 7.0.
The list of options for "soundhw" are listed in order of preference in
the manual. The first three (hda, ac97, es1370) are PCI devices and
easy to test on Linux, and the last four are ISA devices which doesn't
seems to work out of the box on linux.
The sound card 'pcspk' isn't listed even if it used to be accepted by
'-soundhw' because QEMU crash when trying to add it to a Xen domain.
Also, it wouldn't work with "-device" might need to be "-machine
pcspk-audiodev=default" instead.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Jason Andryuk <jandryuk@gmail.com>
While we already have "--no-print-directory" added to the make flags
in some cases, there's one case where the flags is missing, when doing
an out-of-tree build with O=, e.g.
cd xen; make O=build
Without it, we just have loads of "Entering directory" and "Leaving
directory" with the same directory.
The comment and location in the Makefile are copied from Linux.
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
* Always emit current. It's critically important.
* Do not render (0000000000000000) for the symbol in guest context. It's
just line-noise. Instead, explicitly identify which Xen vs guest context.
* Try to tabulate the data, because there is often lots of it.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
PGC_reserved could be ambiguous, and we have to tell what the pages are
reserved for, so this commit intends to rename PGC_reserved to
PGC_static, which clearly indicates the page is reserved for static
memory.
Signed-off-by: Penny Zheng <penny.zheng@arm.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Julien Grall <jgrall@amazon.com>
Handle parameters similar to dbgp=ehci.
Implement this by not resettting dbc->sbdf again in dbc_init_xhc(), but
using a value found there if non-zero. Additionally, add xue->xhc_num to
select n-th controller.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reset ports, to force host system to re-enumerate devices. Otheriwse it
will require the cable to be re-plugged, or will wait in the
"configuring" state indefinitely.
Trick and code copied from Linux:
drivers/usb/early/xhci-dbc.c:xdbc_start()->xdbc_reset_debug_port()
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
[Connor]
Xue is a cross-platform USB 3 debugger that drives the Debug
Capability (DbC) of xHCI-compliant host controllers. This patch
implements the operations needed for xue to initialize the host
controller's DbC and communicate with it. It also implements a struct
uart_driver that uses xue as a backend. Note that only target -> host
communication is supported for now. To use Xue as a console, add
'console=dbgp dbgp=xhci' to the command line.
[Marek]
The Xue driver is taken from https://github.com/connojd/xue and heavily
refactored to fit into Xen code base. Major changes include:
- rename to xhci_dbc
- drop support for non-Xen systems
- drop xue_ops abstraction
- use Xen's native helper functions for PCI access
- move all the code to xue.c, drop "inline"
- build for x86 only
- annotate functions with cf_check
- adjust for Xen's code style
At this stage, only the first xHCI is considered, and only output is
supported. Later patches add support for choosing specific device, and
input handling.
The driver is initiallized before memory allocator works, so all the
transfer buffers (about 230KiB of them) are allocated statically and will
use memory even if XUE console is not selected. The driver can be
disabled build time to reclaim this memory.
Most of this memory is shared with the controller via DMA. Later patch
will adjust structures placement to avoid anything else to be placed on
those DMA-reachable pages. This also means str_buf cannot use static
initializer, without reserving (at least) a whole page page in .data (or
more, when combined with other structures).
Signed-off-by: Connor Davis <davisc@ainfosec.com>
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Expose VIRT_SSBD to guests if the hardware supports setting SSBD in
the LS_CFG MSR (a.k.a. non-architectural way). Different AMD CPU
families use different bits in LS_CFG, so exposing VIRT_SPEC_CTRL.SSBD
allows for an unified way of exposing SSBD support to guests on AMD
hardware that's compatible migration wise, regardless of what
underlying mechanism is used to set SSBD.
Note that on AMD Family 17h and Hygon Family 18h processors the value
of SSBD in LS_CFG is shared between threads on the same core, so
there's extra logic in order to synchronize the value and have SSBD
set as long as one of the threads in the core requires it to be set.
Such logic also requires extra storage for each thread state, which is
allocated at initialization time.
Do the context switching of the SSBD selection in LS_CFG between
hypervisor and guest in the same handler that's already used to switch
the value of VIRT_SPEC_CTRL.
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Henry Wang <Henry.Wang@arm.com>
Allow HVM guests access to MSR_VIRT_SPEC_CTRL if the platform Xen is
running on has support for it. This requires adding logic in the
vm{entry,exit} paths for SVM in order to context switch between the
hypervisor value and the guest one. The added handlers for context
switch will also be used for the legacy SSBD support.
Introduce a new synthetic feature leaf (X86_FEATURE_VIRT_SC_MSR_HVM)
to signal whether VIRT_SPEC_CTRL needs to be handled on guest
vm{entry,exit}.
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Use the logic to set shadow SPEC_CTRL values in order to implement
support for VIRT_SPEC_CTRL (signaled by VIRT_SSBD CPUID flag) for HVM
guests. This includes using the spec_ctrl vCPU MSR variable to store
the guest set value of VIRT_SPEC_CTRL.SSBD, which will be OR'ed with
any SPEC_CTRL values being set by the guest.
On hardware having SPEC_CTRL VIRT_SPEC_CTRL will not be offered by
default to guests. VIRT_SPEC_CTRL will only be part of the max CPUID
policy so it can be enabled for compatibility purposes.
Use '!' to annotate the feature in order to express that the presence
of the bit is not directly tied to its value in the host policy.
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
There is no need to call the "headers.chk" target when it isn't
wanted, so it never need to be .PHONY.
Also, there is no more reason to separate the prerequisites from the
recipe.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
Add "xentop" to "TARGETS" because this variable will be useful later.
Always define all the targets, even when configured with
--disable-monitor, instead don't visit the subdirectory.
This mean xentop/ isn't visited anymore during "make clean" that's how
most other subdirs in the tools/ works.
Also add missing "xentop" rules. It only works without it because we
still have make's built-ins rules and variables, but fix this to not
have to rely on them.
Use $(TARGETS) with $(INSTALL_PROG), and thus install into the
directory rather than spelling the program name.
In the "clean" rule, use $(RM) and remove all "*.o" instead of just
one object.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Luca Fancellu <luca.fancellu@arm.com>
- Rename $(SRCS) to $(OBJS-y), we don't need to collect sources.
- Rename $(IBINS) to $(TARGETS)
- Stop cleaning "xen" and non-set variable $(LIB).
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Luca Fancellu <luca.fancellu@arm.com>
Remove the need for "fs-*" targets by creating a "common.mk" which
have flags that are common to libfsimage/common/ and the other
libfsimages/*/ directories.
In common.mk, make $(PIC_OBJS) a recursively expanded variable so it
doesn't matter where $(LIB_SRCS-y) is defined, and remove the extra
$(PIC_OBJS) from libfsimage/common/Makefile.
Use a $(TARGETS) variable to list things to be built. And $(TARGETS)
can be use in the clean target in common.mk.
iso9660/:
Remove the explicit dependency between fsys_iso9660.c and
iso9660.h, this is handled automaticaly by the .*.d dependency files,
and iso9660.h already exist.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Luca Fancellu <luca.fancellu@arm.com>
Remove "build" targets.
Use simply expanded variables when recursively expanded variable
aren't needed. (Use ":=" instead of "=".)
Don't check if a directory already exist when installing, just create
it.
Fix $(HOTPLUGPATH), it shouldn't have any double-quote.
Some reindentation.
FreeBSD, "hotplugpath.sh" is already installed by common/.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Luca Fancellu <luca.fancellu@arm.com>
Rework dependencies of all objects. We don't need to add dependencies
for headers that $(CC) is capable of generating, we only need to
include $(DEPS_INCLUDE). Some dependencies are still needed so make
knows to generate symlinks for them.
We remove the use of "vpath" for cpuid.c. While it works fine for now,
when we will convert this makefile to subdirmk, vpath will not be
usable. Also, "-iquote" is now needed to build "cpuid.o".
Replace "-I." by "-iquote .", so it applies to double-quote includes
only.
Rather than checking if a symlink exist, always regenerate the
symlink. So if the source tree changed location, the symlink is
updated.
Since we are creating a new .gitignore for the symlink, also move the
entry to it.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Luca Fancellu <luca.fancellu@arm.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Setup proper dependencies with libacpi so we don't need to run "make
hvmloader" in the "all" target. ("build.o" new prerequisite isn't
exactly proper but a side effect of building the $(DSDT_FILES) is to
generate the "ssdt_*.h" needed by "build.o".)
Make use if "-iquote" instead of a plain "-I".
For "roms.inc" target, use "$(SHELL)" instead of plain "sh". And use
full path to "mkhex" instead of a relative one. Lastly, add "-f" flag
to "mv" to avoid a prompt in case the target already exist and we
don't have write permission.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Luca Fancellu <luca.fancellu@arm.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Penny Zheng