Leaf 0xa is reserved by AMD, and only exposed to Intel guests when vPMU is
enabled. Leave the logic as-was, ready to be cleaned up when further
toolstack infrastructure is in place.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
The thermal/performance leaf was previously hidden from HVM guests, but fully
visible to PV guests. Most of the leaf refers to MSR availability, and there
is nothing an unprivileged PV guest can do with the information, so hide the
leaf entirely.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
The MONITOR flag isn't exposed to guests. The existing toolstack logic, and
pv_cpuid() in the hypervisor, zero the MONITOR leaf for queries.
However, the MONITOR leaf is still visible in the hardware domains native
CPUID view, and Linux depends on this to set up C-state information. Leak the
hosts MONITOR leaf under the same circumstances that the MONITOR feature is
leaked.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Leaf 0x4 is reserved by AMD. For Intel, it is a multi-invocation leaf with
ecx enumerating different cache details.
Add a new union for it in struct cpuid_policy, collect it from hardware in
calculate_raw_policy(), audit it in recalculate_cpuid_policy() and update
guest_cpuid() and update_domain_cpuid_info() to properly insert/extract data.
A lot of the data here will need further auditing/refinement when better
topology support is introduced, but for now, this matches the existing
toolstack behaviour.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
hap_p2m_ga_to_gfn() and sh_page_fault() currently use guest_l1e_get_gfn() to
obtain the translation of a pagewalk. This is conceptually wrong (the
semantics of gw.l1e is an internal detail), and will actually be wrong when
PSE36 superpage support is fixed. Switch them to using guest_walk_to_gfn().
guest_walk_tables() also uses guest_l1e_get_gfn(), and is updated for
consistency.
Take the opportunity to const-correct the walk_t parameter of the
guest_walk_to_*() helpers, and implement guest_walk_to_gpa() in terms of
guest_walk_to_gfn() to avoid duplicating the actual translation calculation.
While editing guest_walk_to_gpa(), fix a latent bug by causing it to return
INVALID_PADDR rather than 0 for a failed translation, as 0 is also a valid
successful result. The sole caller, sh_page_fault(), has already confirmed
that the translation is valid, so this doesn't cause a behavioural change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Tim Deegan <tim@xen.org>
Acked-by: George Dunlap <george.dunlap@citrix.com>
All actions which refer to the active ldt/gdt/idt or task register
(e.g. loading a new segment selector) are known as implicit supervisor
accesses, even when the access originates from user code.
Right away, this fixes a bug during userspace emulation where a pagewalk for a
system table was (incorrectly) performed as a user access, causing an access
violation in the common case, as system tables reside on supervisor mappings.
The implicit/explicit distinction is necessary in the pagewalk when SMAP is
enabled. Refer to Intel SDM Vol 3 "Access Rights" for the exact details.
Introduce a new pagewalk input, and make use of the new system segment
references in hvmemul_{read,write}(). While modifying those areas, move the
calculation of the appropriate pagewalk input before its first use.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Tim Deegan <tim@xen.org>
Acked-by: George Dunlap <george.dunlap@citrix.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
The way these extension spaces get handled we so far always end up
going through the generic SrcMem operand fetch path for unused table
entries. Suppress actual memory accesses happening by forcing op_bytes
to zero in those cases.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Define INVALID_VCPU_ID as MAX_VIRT_CPUS to avoid casting problem later
on. At the moment it can always fit in uint8_t.
Signed-off-by: Julien Grall <julien.grall@arm.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
hvm_domain only contains the HVM_PARAM that on ARM are not used often.
So it is not necessary to have hvm_domain fitting in a cacheline. Drop
it to save 128 bytes in the structure arch_domain.
Signed-off-by: Julien Grall <julien.grall@arm.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Currently the acpi banks are stored in a separate variable and have an
header just for them.
This variable can be moved in the structure bootinfo removing an header
and a global variable.
Signed-off-by: Julien Grall <julien.grall@arm.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
The code contains a lot of memory_map[offset]. This could be simplified
by incrementing the descriptor pointer every time.
Signed-off-by: Julien Grall <julien.grall@arm.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
The code to add a new memory descriptor is duplicated three times. Add a
new helper that adds the descriptor.
Signed-off-by: Julien Grall <julien.grall@arm.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
The code to add a new bank is duplicated twice. Add a new helper that
checks if the maximum of bank has not reached and adds the bank.
Signed-off-by: Julien Grall <julien.grall@arm.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Now that all underscore prefixed instances have been replaced, this
concludes the register renaming project.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Those assertions as well as mce_[u|d]handlers[], mce_[u|d]handler_num
and mce_action() were intel only and lifted to the common code by c/s
3a91769d6e. However, MCE handling on AMD does not use mce_[u|d]handlers[]
before and after that commit, so assertions in mce_action() about their
size do not make sense for AMD. To be worse, they can crash the debug
build on AMD. Remove them to make the debug build work on AMD.
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
On Intel CPU, an attemp to write to MSR_IA32_MCG_STATUS with any
non-zero value would result in #GP.
This commit writes 0 on AMD CPU as well instead of just clearing MCIP
bit, because all non-reserved bits of MSR_IA32_MCG_STATUS have been
handled at this point.
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
The current implementation only fills MC MSRs on vcpu0 and leaves MC
MSRs on other vcpus empty in the broadcast case. When guest reads 0
from MSR_IA32_MCG_STATUS on vcpuN (N > 0), it may think it's not
possible to recover the execution on that vcpu and then get panic,
although MSR_IA32_MCG_STATUS filled on vcpu0 may imply the injected
vMCE is actually recoverable. To avoid such unnecessary guest panic,
set MSR_IA32_MCG_STATUS on vcpuN (N > 0) to MCG_STATUS_MCIP|MCG_STATUS_RIPV.
In addition, fill_vmsr_data(mc_bank, ...) is changed to return -EINVAL
rather than 0, if an invalid domain ID is contained in mc_bank.
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
All existing calls to x86_mcinfo_reserve() are followed by statements
that set the size and the type of the reserved space, so move them into
x86_mcinfo_reserve() to simplify the code.
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
c/s 9d13fd9fd3 turned to update the
mcinfo buffer in-place instead of using x86_mcinfo_add(). The last
uses of x86_mcinfo_add() were removed by that commit as well.
Therefore, x86_mcinfo_add() was deprecated in fact.
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
c/s e966818264 added
mce_need_clearbank_register below the comment of
x86_mce_callback_register(). This commit (1) adjusts the first
paragraph of comment to be a general statement of all callback
register functions, and (2) moves the second paragraph to the
front of x86_mce_callback_register().
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Storing -1 into both fields was misleading consumers: We really should
have a manifest constant for "invalid vCPU" here, and the already
existing DOMID_INVALID should be used.
Also correct a bogus (dead code) check in mca_init_global(), at once
introducing a manifest constant for the early boot "invalid vCPU"
pointer (avoiding proliferation of the open coding). Make that pointer
a non-canonical address at once.
Finally, don't leave mc_domid uninitialized in mca_init_bank().
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Other Amazon folks indicate he's not available as a maintainer anymore
at this point in time. Maintenance of the MCE sub-component will fall
back to the x86 maintainers.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Christoph Egger <chegger@amazon.de>
v{,u}comis{s,d}, and vcvt{,t}s{s,d}2si are two-operand instructions, while
vzero{all,upper} take no operands. Each require vex.reg set to ~0 to avoid
suffering #UD.
Spotted while fuzzing with AFL
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
The vlapic code already aborts an APIC assist if an interrupt is deferred
because a higher priority interrupt has already been delivered (and hence
its vector is pending in the ISR).
However, it is also necessary to abort an APIC assist in the case where a
higher priority is about to be delivered because, in either case, at least
two vectors will be pending in the ISR and hence an EOI is necessary.
Also, following on from the above reasoning, the decision to start a new
APIC assist should clearly be based upon whether any other vector is
pending in the ISR, regardless of whether it is lower or higher in
priority. (In fact the code in question cannot be reached if the
vector is lower in priority). Thus the single use of
vlapic_find_lowest_vector() can be replaced with a call to
vlapic_find_highest_isr() and the former function removed.
Without this patch, because the logic is flawed, a domain_crash() results
when an attempt is made to erroneously start a new APIC assist.
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
The mov to/from cr/dr behave as if they were encoded with Mod = 3. When
encoded with Mod != 3, no displacement or SIB bytes are fetched.
Add a test with a deliberately malformed ModRM byte. (Also add the
automatically-generated simd.h to .gitignore.)
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
There where a couple of unneeded packed attributes in several x86-specific
structures, that are obviously aligned. The only non-trivial one is
vmcb_struct, which has been checked to have the same layout with and without
the packed attribute using pahole. In that case add a build-time size check to
be on the safe side.
No functional change is expected as a result of this commit.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
... and their AVX equivalents. Note that a few instructions aren't
covered (yet), but those all fall into common pattern groups, so I
would hope that for now we can do with what is there.
Just like for SSE/SSE2, MMX insns aren't being covered at all, as
they're not easy to deal with: The compiler refuses to emit such for
other than uses of built-in functions.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
This being a strict (MMX register only) subset of SSE, we can simply
adjust the respective checks while making the new predicate look at
both flags.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
... and their AVX equivalents. Note that a few instructions aren't
covered (yet), but those all fall into common pattern groups, so I
would hope that for now we can do with what is there.
MMX insns aren't being covered at all, as they're not easy to deal
with: The compiler refuses to emit such for other than uses of built-in
functions.
The current way of testing AVX insns is meant to be temporary only:
Once we fully support that feature, the present tests should rather be
replaced than full ones simply added.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Note that other than most scalar instructions, vcvt{,t}s{s,d}2si do #UD
when VEX.l is set on at least some Intel models. To be on the safe
side, implement the most restrictive mode here for now when emulating
an Intel CPU, and simply clear the bit when emulating an AMD one.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Previously supported insns are being converted to the new model, and
several new ones are being added.
To keep the stub handling reasonably simple, integrate SET_SSE_PREFIX()
into copy_REX_VEX(), at once switching the stubs to use an empty REX
prefix instead of a double DS: one (no byte registers are being
accessed, so an empty REX prefix has no effect), except (of course) for
the 32-bit test harness build.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
This aims at covering most MMX/SSEn/AVX instructions in the 0x0f-escape
space with memory operands. Not covered here are irregular moves,
converts, and {,U}COMIS{S,D} (modifying EFLAGS).
Note that the distinction between simd_*_fp isn't strictly needed, but
I've kept them as separate entries since in an earlier version I needed
them to be separate, and we may well find it useful down the road to
have that distinction.
Also take the opportunity and adjust the vmovdqu test case the new
LDDQU one here has been cloned from: To zero a ymm register we don't
need to go through hoops, as 128-bit AVX insns zero the upper portion
of the destination register, and in the disabled AVX2 code there was a
wrong YMM register used.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
clean_dcache_va_range and clean_and_invalidate_dcache_va_range don't
calculate the range correctly when "end" is not cacheline aligned. As a
result, the last cacheline is not skipped. Fix the issue by aligning the
start address to the cacheline size.
In addition, make the code simpler and faster in
invalidate_dcache_va_range, by removing the module operation and using
bitmasks instead. Also remove the size adjustments in
invalidate_dcache_va_range, because the size variable is not used later
on.
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Julien Grall <julien.grall@arm.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Currently, p2m_mem_access_emulate_check() uses p2m_get_mem_access()
to check if the page restrictions have been lifted between the time
of sending the vm_event out and the reception of the reply - in
which case emulation is no longer required. Unfortunately,
p2m_get_mem_access() uses p2m_get_hostp2m(d) which only checks the
default EPT (view 0 in altp2m parlance). This patch fixes this by
checking the active altp2m view instead, whenever applicable.
Signed-off-by: Razvan Cojocaru <rcojocaru@bitdefender.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Tamas K Lengyel <tamas@tklengyel.com>
Andrew Cooper
Jan Beulich
Julien Grall
Haozhong Zhang
Paul Durrant
Roger Pau Monné
Stefano Stabellini
Razvan Cojocaru