Currently, the VM_EVENT_INTERFACE_VERSION is determined at runtime, by
inspecting the corresponding field in a vm_event_request. This helper
opcode will query the hypervisor supported version before the vm_event
related structures and layout are set-up.
Signed-off-by: Petre Pircalabu <ppircalabu@bitdefender.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Tamas K Lengyel <tamas@tklengyel.com>
Allow altp2m users to disable #VE/VMFUNC alone. Currently it is
only possible to disable this functionality when we disable altp2m
completely; #VE/VMFUNC can only be enabled once per altp2m session.
In addition to making things complete, disabling #VE is also a
workaround for CFW116 ("When Virtualization Exceptions are Enabled,
EPT Violations May Generate Erroneous Virtualization Exceptions")
on Xeon E-2100 CPUs.
Signed-off-by: Razvan Cojocaru <rcojocaru@bitdefender.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
This finally (after literally years of work!) marks the point where the
toolstack can ask the hypervisor for the current CPUID configuration of a
specific domain.
Introduce a new flask access vector and update the default policies.
Also extend xen-cpuid's --policy mode to be able to take a domid and dump a
specific domains CPUID and MSR policy.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Sergey Dyasli <sergey.dyasli@citrix.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Provide a SYSCTL for the toolstack to obtain complete system CPUID and MSR
policy information.
For the flask side of things, this subop is closely related to
{phys,cputopo,numa}info, so shares the physinfo access vector.
Extend the xen-cpuid utility to be able to dump the system policies. An
example output is:
Xen reports there are maximum 113 leaves and 3 MSRs
Raw policy: 93 leaves, 3 MSRs
CPUID:
leaf subleaf -> eax ebx ecx edx
00000000:ffffffff -> 0000000d:756e6547:6c65746e:49656e69
00000001:ffffffff -> 000306c3:00100800:7ffafbff:bfebfbff
00000002:ffffffff -> 76036301:00f0b5ff:00000000:00c10000
00000004:00000000 -> 1c004121:01c0003f:0000003f:00000000
00000004:00000001 -> 1c004122:01c0003f:0000003f:00000000
00000004:00000002 -> 1c004143:01c0003f:000001ff:00000000
00000004:00000003 -> 1c03c163:03c0003f:00001fff:00000006
00000005:ffffffff -> 00000040:00000040:00000003:00042120
00000006:ffffffff -> 00000077:00000002:00000009:00000000
00000007:00000000 -> 00000000:000027ab:00000000:9c000000
0000000a:ffffffff -> 07300403:00000000:00000000:00000603
0000000b:00000000 -> 00000001:00000002:00000100:00000000
0000000b:00000001 -> 00000004:00000008:00000201:00000000
0000000d:00000000 -> 00000007:00000340:00000340:00000000
0000000d:00000001 -> 00000001:00000000:00000000:00000000
0000000d:00000002 -> 00000100:00000240:00000000:00000000
80000000:ffffffff -> 80000008:00000000:00000000:00000000
80000001:ffffffff -> 00000000:00000000:00000021:2c100800
80000002:ffffffff -> 65746e49:2952286c:6f655820:2952286e
80000003:ffffffff -> 55504320:2d334520:30343231:20337620
80000004:ffffffff -> 2e332040:48473034:0000007a:00000000
80000006:ffffffff -> 00000000:00000000:01006040:00000000
80000007:ffffffff -> 00000000:00000000:00000000:00000100
80000008:ffffffff -> 00003027:00000000:00000000:00000000
MSRs:
index -> value
000000ce -> 0000000080000000
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Sergey Dyasli <sergey.dyasli@citrix.com>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Currently there is a subop for setting the memaccess of a page, but not
for consulting it. The new HVMOP_altp2m_get_mem_access adds this
functionality.
Both altp2m get/set mem access functions use the struct
xen_hvm_altp2m_mem_access which has now dropped the `set' part and has
been renamed from xen_hvm_altp2m_set_mem_access.
Signed-off-by: Adrian Pop <apop@bitdefender.com>
Signed-off-by: Razvan Cojocaru <rcojocaru@bitdefender.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Tamas K Lengyel <tamas@tklengyel.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
Introduce a new hvmop, HVMOP_altp2m_set_suppress_ve, which allows a
domain to change the value of the #VE suppress bit for a page.
Add a libxc wrapper for invoking this hvmop.
Signed-off-by: Adrian Pop <apop@bitdefender.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Tamas K Lengyel <tamas@tklengyel.com>
Now that XEN_DOMCTL_createdomain handles the grant table limits, remove
XEN_DOMCTL_set_gnttab_limits (including XSM hooks and libxc wrappers).
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
set_max_evtchn is somewhat weird. It was introduced with the event_fifo work,
but has never been used. Still, it is a bounding on resources consumed by the
event channel infrastructure, and should be part of createdomain, rather than
editable after the fact.
Drop XEN_DOMCTL_set_max_evtchn completely (including XSM hooks and libxc
wrappers), and retain the functionality in XEN_DOMCTL_createdomain.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
In future patches, the structure will be extended with further information,
and this is far cleaner than adding extra parameters.
The python stubs are the only user which passes NULL for the existing config
option (which is actually the arch substructure). Therefore, the #ifdefary
moves to compensate.
For libxl, pass the full config object down into
libxl__arch_domain_{prepare,save}_config(), as there are in practice arch
specific settings in the common part of the structure (flags s3_integrity and
oos_off specifically).
No practical change in behaviour.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Move x86_cpuid_lookup_deep_deps() into the shared library, removing the
individual copies from the hypervisor and libxc respectively.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
In order to support auditing of qemu depriv, my audit tool wants to
know the fd of a privcmd handle on which it can easily make
hypercalls. xencall provides such a handle, but has no cooked
facilities for making hypercalls. So I open a libxc handle. That
means I need to get the privcmd fd out of the libxc handle.
ISTM that it is best to do this by providing an interface to get the
underlying library handles for a libxc handle. This kind of interface
is quite common elsewhere and has not caused problems.
libxc is not a stable API so the downside risk of providing this
access is not significant.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
This patch is adding a way to enable/disable inguest pagefault
events. It introduces the xc_monitor_inguest_pagefault function
and adds the inguest_pagefault_disabled in the monitor structure.
This is needed by the introspection so it will only get gla
faults and not get spammed with other faults.
In p2m_mem_access_check() we emulate so no event will get sent.
Signed-off-by: Alexandru Isaila <aisaila@bitdefender.com>
Acked-by: Tamas K Lengyel <tamas@tklengyel.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
This helper appears to have been introduced 10 years ago by c/s 5f14a87ceb
"x86, hvm: Guest CPUID configuration" and never had any users at all.
alloc_str() is actually an opencoded calloc(), and now only has a single
caller. Use calloc() directly and drop alloc_str().
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
For the default EPT view we have xc_set_mem_access_multi(), which
is able to set an array of pages to an array of access rights with
a single hypercall. However, this functionality was lacking for the
altp2m subsystem, which could only set page restrictions for one
page at a time. This patch addresses the gap.
HVMOP_altp2m_set_mem_access_multi has been added as a HVMOP (as opposed to a
DOMCTL) for consistency with its HVMOP_altp2m_set_mem_access counterpart (and
hence with the original altp2m design, where domains are allowed - with the
proper altp2m access rights - to alter these settings), in the absence of an
official position on the issue from the original altp2m designers.
Signed-off-by: Razvan Cojocaru <rcojocaru@bitdefender.com>
Signed-off-by: Petre Pircalabu <ppircalabu@bitdefender.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
Removes special purpose access to Credit1 vCPU
migration delay parameter.
This fixes a build breakage, occuring when Xen
is configured with SCHED_CREDIT=n.
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
This is for the proposal "Allow setting up shared memory areas between VMs
from xl config file". See:
https://lists.xen.org/archives/html/xen-devel/2017-08/msg03242.html
Then plan is to use XENMEM_add_to_physmap_batch to map the shared pages from
one domU to another and use XENMEM_remove_from_physmap to cancel the sharing.
A wrapper to XENMEM_add_to_physmap_batch was added in the following commit:
commit 20e725e936
Now add the wrapper to XENMEM_remove_from_physmap.
Signed-off-by: Zhongze Liu <blackskygg@gmail.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Wei Liu <wei.liu2@citrix.com>
c/s 4ddf474e2 "tools/xen-mceinj: Pass in GPA when injecting through
MSR_MCI_ADDR" removed the remaining user of hypercall.
It has been listed as broken, deprecated and wont-fix since XSA-74, so take
this opportunity to remove it completely.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Remove the implementation of XEN_DOMCTL_pin_mem_cacheattr since it has
been replaced by a dmop. Change xc_domain_pin_memory_cacheattr() so
that it is only defined when XC_WANT_COMPAT_DEVICEMODEL_API is set and
have it call the new dmop. Leave the definitions of
XEN_DOMCTL_MEM_CACHEATTR_* since they are still used by QEMU.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
This patch implements new generic set value interfaces in libxc and libxl.
These interfaces are suitable for all allocation features. It also adds a
new MBA set value command in xl.
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
This patch implements generic get value interfaces in libxc and libxl.
It also refactors the get value flow in xl to make it be suitable for all
allocation features. Based on that, a new MBA get value command is added in xl.
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
This patch implements a new libxc get hw info interface and corresponding
data structures. It also changes libxl_psr.c to call this new interface.
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
This patch adds the old value param and the onchangeonly option
to the VM_EVENT_REASON_MOV_TO_MSR event.
The param was added to the vm_event_mov_to_msr struct and to the
hvm_monitor_msr function. Finally I've changed the bool_t param
to a bool for the hvm_msr_write_intercept function.
Signed-off-by: Alexandru Isaila <aisaila@bitdefender.com>
Acked-by: Tamas K Lengyel <tamas@tklengyel.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Mixed throughout libxc are uint32_t, int, and domid_t for domid parameters.
With a signed type, and an explicitly 16-bit type, it is exceedingly difficult
to construct an INVALID_DOMID constant which works with all of them. (The
main problem being that domid_t gets unconditionally zero extended when
promoted to int for arithmatic.)
Libxl uses uint32_t consistently everywhere, so alter libxc to match.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Release-acked-by: Julien Grall <julien.grall@linaro.org>
[ wei: fix compilation error in libxl ]
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Add a new domctl API to initialize vpl011. It takes the GFN and console
backend domid as input and returns an event channel to be used for
sending and receiving events from Xen.
Xen will communicate with xenconsole using GFN as the ring buffer and
the event channel to transmit and receive pl011 data on the guest domain's
behalf.
Signed-off-by: Bhupinder Thakur <bhupinder.thakur@linaro.org>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Wei Liu <wei.liu2@citrix.com>
If case of a vm_event with the emulate_flags set, if the instruction
is not implemented by the emulator, the monitor should be notified instead
of directly injecting a hw exception.
This behavior can be used to re-execute an instruction not supported by
the emulator using the real processor (e.g. altp2m) instead of just
crashing.
Signed-off-by: Petre Pircalabu <ppircalabu@bitdefender.com>
Acked-by: Tamas K Lengyel <tamas@tklengyel.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Add a new libxc function xc_domain_set_gnttbl_limits() setting the
limits for the maximum numbers of grant table frames and maptrack
frames of a domain.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
In some introspection usecases, an in-guest agent needs to communicate
with the external introspection agent. An existing mechanism is
HVMOP_guest_request_vm_event, but this is restricted to kernel usecases
like all other hypercalls.
Introduce a mechanism whereby the introspection agent can whitelist the
use of HVMOP_guest_request_vm_event directly from userspace.
Signed-off-by: Alexandru Isaila <aisaila@bitdefender.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Tamas K Lengyel <tamas@tklengyel.com>
Add a new libxc function to set hypervisor parameters at runtime
similar to boot time parameters via command line.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
In some introspection usecases, an in-guest agent needs to communicate
with the external introspection agent. An existing mechanism is
HVMOP_guest_request_vm_event, but this is restricted to kernel usecases
like all other hypercalls.
Introduce a mechanism whereby the introspection agent can whitelist the
use of HVMOP_guest_request_vm_event directly from userspace.
Signed-off-by: Alexandru Isaila <aisaila@bitdefender.com>
Acked-by: Tamas K Lengyel <tamas@tklengyel.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
This patch implements changes in xl/xc changes to support
showing CBM of L2 CAT.
The new level option is introduced to original CAT showing
command in order to show CBM for specified level CAT.
- 'xl psr-cat-show' is updated to show CBM of a domain
according to input cache level.
Examples:
root@:~$ xl psr-cat-show -l2 1
Socket ID : 0
Default CBM : 0xff
ID NAME CBM
1 ubuntu14 0x7f
Signed-off-by: He Chen <he.chen@linux.intel.com>
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
This patch implements xl/xc changes to support get HW info
for L2 CAT.
'xl psr-hwinfo' is updated to show both L3 CAT and L2 CAT
info.
Example(on machine which only supports L2 CAT):
Cache Monitoring Technology (CMT):
Enabled : 0
Cache Allocation Technology (CAT): L2
Socket ID : 0
Maximum COS : 3
CBM length : 8
Default CBM : 0xff
Signed-off-by: He Chen <he.chen@linux.intel.com>
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
There are no current users which I can locate. One piece of xend which didn't
move forwards into xl/libxl is this:
# Configure host CPUID consistency checks, which must be satisfied for this
# VM to be allowed to run on this host's processor type:
#cpuid_check=[ '1:ecx=xxxxxxxxxxxxxxxxxxxxxxxxxx1xxxxx' ]
# - Host must have VMX feature flag set
The implementation of xc_cpuid_check() is conceptually broken. Dom0's view of
CPUID is not the approprite view to check, and will be wrong in the presence
of CPUID masking/faulting, and for HVM-based toolstack domains.
If it turns out that the functionality is required, it should be implemented
in terms of XEN_SYSCTL_get_cpuid_policy to use the proper CPUID view.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Though XEN_MC_inject_v2 allows injecting MC# to specified CPUs, the
current xc_mca_op() does not use this feature and not provide an
interface to callers. This commit add a new xc_mca_op_inject_v2() that
receives a cpumap providing the set of target CPUs.
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
This patch adds new interface for GNTTABOP_query_size in libxc to help
query the current grant table frames and maximum grant table frames for a
specific domain.
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Add support for filtering out the write_ctrlreg monitor events if they
are generated only by changing certains bits.
A new parameter (bitmask) was added to the xc_monitor_write_ctrlreg
function in order to mask the event generation if the changed bits are
set.
Signed-off-by: Petre Pircalabu <ppircalabu@bitdefender.com>
Acked-by: Tamas K Lengyel <tamas@tklengyel.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
xc_{get,set}_hvm_param() are deprecated because they truncate their value
parameter in 32bit builds of libxc, and are therefore unfit for use.
As there is only a single remaining user, switch that user over to
xc_hvm_param_get() and drop these functions completely.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Currently xc_translate_foreign_address() only checks for the PSE bit on
level 2 entries (that's 2 MB pages on x64 and 32-bit with PAE, and 4 MB
pages on 32-bit). But the Linux kernel sometimes uses 1 GB pages. This
patch fixes that, by checking the PSE bit on level 3 entries if the guest
has 4 translation levels (that means 64-bit guests only).
Signed-off-by: Cristian-Bogdan Sirb <csirb@bitdefender.com>
Signed-off-by: Razvan Cojocaru <rcojocaru@bitdefender.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Release-acked-by: Julien Grall <julien.grall@arm.com>
which surprisingly (or maybe not) looks like
XEN_SYSCTL_TMEM_OP_SET_POOLS.
This hypercall came about, as explained in docs/misc/tmem-internals.html:
When tmem was first proposed to the linux kernel mailing list
(LKML), there was concern expressed about security of shared ephemeral
pools. The initial tmem implementation only
required a client to provide a 128-bit UUID to identify a shared pool, and the
linux-side tmem implementation obtained this UUID from the superblock of the
shared filesystem (in ocfs2). It was
pointed out on LKML that the UUID was essentially a security key and any
malicious domain that guessed it would have access to any data from the shared
filesystem that found its way into tmem.
..
As a result, a Xen boot option -- tmem_shared_auth; -- was
added. The option defaults to disabled,
but when it is enabled, management tools must explicitly authenticate (or may
explicitly deny) shared pool access to any client.
On Xen, this is done with the xm tmem-shared-auth command.
"
However the implementation has some rather large holes:
a) The hypercall was accessed from any guest.
b) If the ->domain id value is 0xFFFF then one can toggle the
tmem_global.shared_auth knob on/off. That with a)
made it pretty bad.
c) If one toggles the tmem_global.shared_auth off, then the
'tmem_shared_auth=1' bootup parameter is ignored and
one can join any shared pool (if UUID is known)!
d) If the 'tmem_shared_auth=1' and tmem_global.shared_auth is
set to 1, then one can only join an shared pool if the
UUID has been set by 'xl tmem-shared-auth'. Otherwise
the joining of a pool fails and a non-shared pool is
created (without errors to guest). Not exactly sure if
the shared pool creation at that point should error out
or not.
e) If a guest is migrated, the policy values (which UUID
can be shared, whether tmem_global.shared_auth is set, etc)
are completely ignored.
This patch only fixes a) and only allows the hypercall to
be called by the control domain. Subsequent patches will
fix the remaining issues.
We also have to call client_create as the guest at this
point may not have done any tmem hypercalls - and hence
the '->tmem' from 'struct domain' is still NULL. Us calling
client_create fixes this.
Acked-by: Wei Liu <wei.liu2@citrix.com> [libxc changes]
Reviewed-by: Jan Beulich <jbeulich@suse.com> [hypervisor changes]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
It's useful for an introspection tool to be able to inspect
XSAVE states. Xen already has a DOMCTL that can be used for this
purpose, but it had no public libxc wrapper. This patch adds
xc_vcpu_get_extstate().
Signed-off-by: Razvan Cojocaru <rcojocaru@bitdefender.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
This patch extracts all functions resulting in a dm_op hypercall from
libxenctrl and moves them into libxendevicemodel. It also adds a compat
layer into libxenctrl, which can be selected by defining
XC_WANT_COMPAT_DEVICEMODEL_API to 1 before including xenctrl.h.
With this patch the core of libxendevicemodel still uses libxencall to
issue the dm_op hypercalls, but this is done by calling through code that
can be modified on a per-OS basis. A subsequent patch will add a Linux-
specific variant.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Petre Pircalabu
Razvan Cojocaru
Sergey Dyasli
Adrian Pop
Andrew Cooper
Roger Pau Monné
Ian Jackson
Alexandru Isaila
Dario Faggioli
Zhongze Liu
Ross Lagerwall
Yi Sun
Bhupinder Thakur
Juergen Gross
Jan Beulich
Haozhong Zhang
Dongli Zhang
Wei Liu
Cristian-Bogdan Sirb
Konrad Rzeszutek Wilk
Paul Durrant