In prepearation to moving acpi sources into generally available
libacpi:
1. Pass IOAPIC/LAPIC/PCI mask values via struct acpi_config
2. Modify include files search paths to point to acpi directory
3. Macro-ise include file for build.c that defines various
utilities used by that file. Users of libacpi will be expected
to define this macro when compiling build.c
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Components that wish to use ACPI builder will need to provide their own
mem_alloc() and virt_to_phys() routines. Pointers to these routines will
be passed to the builder as memory ops.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Initialize it in hvmloader, avoiding ACPI code's use of xenstore_read()
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
This way ACPI code won't use xenstore-read() and hvm_param_set()
which are private to hvmloader.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
By doing this we can move hvmloader-private interfaces (such as
uart_exists(), lpt_exists() etc.) out of the ACPI builder. This will
help us with allowing to call the builder from places other than
hvmloader.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
In preparation for moving out ACPI builder make all
BIOSes call hvmloader_acpi_build_tables() instead of
calling ACPI code directly.
No functional changes.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
The IO-APIC address has variable bits determined by the PCI-to-ISA
bridge (albeit for now we refrain from actually evaluating them, as
there's still implicit rather than explicit agreement on the IO-APIC
base address between qemu and the hypervisor), and the IO-APIC version
should be read from the IO-APIC.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
scratch_alloc() set scratch_start to the last byte of the current
allocation. The value of scratch_start is then reused as is (if it is
already aligned) in the next allocation. This result in a potential reuse
of the last byte of the previous allocation.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
As recommended in http://www.gnu.org/licenses/gpl-howto.en.html.
This is the result of:
$ git grep -El Mass\|Temple\|Franklin | xargs ./fsf.pl
Where fsf.pl is:
#!/usr/bin/perl -w -pi.bak -0777
my $repl = 'If not, see <http://www.gnu.org/licenses/>.';
my $br = qr/(?:\s*\n\s*(?:[\*\#]|\/\/|\.\\" )?\s*|\s+)/;
my $inwt = qr/[Ii]f${br}not,${br}write${br}(?:to${br})?the${br}Free${br}Software${br}Foundation,(?:${br}Inc\.,)?/;
my $mass = qr/675${br}Mass${br}Ave,?${br}Cambridge,?${br}MA${br}02139,?${br}USA,?\.?/;
my $franklin = qr/51${br}Franklin${br}St(?:reet)?(?:,${br}| - )Fifth${br}Floor,?${br}Boston,?${br}MA,?${br}02110-1301,?${br}USA,?\.?/;
my $temple = qr/59${br}Temple${br}Place(?:,${br}| - )Suite${br}330,?${br}Boston,?${br}MA,?${br}021110?-1307,?${br}USA,?\.?/;
s|$inwt$br$mass|$repl|m;
s|$inwt$br$franklin|$repl|m;
s|$inwt$br$temple|$repl|m;
The only remaining mentions of these addresses are in COPYING files which I
haven't touched.
Some of the changed files are imports from elsewhere, however
filtering them out is tricky, I think it is tolerable to have these
files be modified here and then perhaps reverted on the next sync,
since it's only 1-2 lines and obvious what is going on.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Now we get this map layout by call XENMEM_memory_map then
save them into one global variable memory_map[]. It should
include lowmem range, rdm range and highmem range. Note
rdm range and highmem range may not exist in some cases.
And here we need to check if any reserved memory conflicts with
[RESERVED_MEMORY_DYNAMIC_START, RESERVED_MEMORY_DYNAMIC_END).
This range is used to allocate memory in hvmloder level, and
we would lead hvmloader failed in case of conflict since its
another rare possibility in real world.
CC: Keir Fraser <keir@xen.org>
CC: Jan Beulich <jbeulich@suse.com>
CC: Andrew Cooper <andrew.cooper3@citrix.com>
CC: Ian Jackson <ian.jackson@eu.citrix.com>
CC: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
CC: Ian Campbell <ian.campbell@citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Tiejun Chen <tiejun.chen@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: George Dunlap <george.dunlap@eu.citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
The emacs variable to set the C style from a local variable block is
c-file-style, not c-set-style.
Signed-off-by: David Vrabel <david.vrabel@citrix.com
Xen platform promises never to use this physical address region, and
will always mark it as reserved in the physical memory map presented
to the OS (preventing its use by generic OS services such as BAR
remapping).
Linux will use this region for mapping the shared-info page.
Signed-off-by: Keir Fraser <keir@xen.org>
and populate it at boot time with a value read from
"platform/generation_id". Also add code to libxl to populate this
xenstore key with the value of a new 'generation_id' parameter in the
VM config file. Populate the ADDR package of VM_Gen_Counter ACPI
device such that the first integer evaluates to the low order 32 bits
of the buffer address and the second integer evaluates to the high
order 32 bits of the buffer address.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Committed-by: Keir Fraser <keir@xen.org>
This avoids a conflict with SeaBIOS's memory management. Moreover
there is no reason that acp_info must live below 1MB, and moving it
out actually simplifies our code.
Signed-off-by: Keir Fraser <keir@xen.org>
These can be used by BIOS-specific handlers to set up memory regions
as required by their firmware payload.
Use mem_hole_alloc() to allocate properly reserved space for the
shared-info-page mapping. The old location conflicts with space
required for the OVMF BIOS (support for which is work in progress).
Signed-off-by: Keir Fraser <keir@xen.org>
1024 bytes create a lot of wastage when the majority of allocations
are of BIOS table data structures which are generally happy with much
lower alignment. I conservatively chose 16 bytes.
Most callers pass 0 for the alignment anyway, for the rombios high
code allocation I kept it 1024 byte aligned since it was the only case
that didn't seem obviously ok with a smaller alignment.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Returns memory which is passed to the subsequent BIOS but can be
reused once the contents is consumed. An example of this would be a
BIOS table which the BIOS consumes by copying rather than simply
referencing.
Users which need a temporary scratch buffer for internal use
scratch_start which follows these allocations.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Executing UD2 (invalid opcode) triggers a triple fault which signals
reboot to the toolstack, rather than crash.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Keir Fraser <keir@xen.org>
Pass the table address as a paramter to the build function and cause
it to return the number of entries. Pass both base and offset as
parameters to the dump function.
This adds a duplicated e820.h header to ROMBIOS. Since the e820 data
structure is well defined by existing BIOS implementations I think
this is OK and simplifies the cross talk between hvmloader and
ROMBIOS.
Reduces the cross talk between ROMBIOS and hvmloader.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Keir Fraser <keir@xen.org>
1. Remove unportable O and D format specifiers
2. Fix X format specifier to print upper-case hex characters
3. Fix d format specifier to print -ve numbers
4. Fix handling of int vs. long (although not actually an issue
for the i386 compile target)
5. Don't use the antiquated C 'register' type attribute.
Signed-off-by: Keir Fraser <keir@xen.org>
This gets rid of shenanigans with relocating the jump table around the
place.
Also clean up bios_info table while we are updating it.
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
To make memory management easier in hvmloader, defer building a
generic E820 map until the end of hvmloader bootstrap.
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
hvm_info_table to describe memory parameters in a simpler form from
domain builder to hvmloader.
Also move reserved special page mappings immediately below the 4GB
boundary.
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
When creating an HVM domain, if e.g. another domain is created before
qemu allocates video memory, the extra 8MB memory ballooning is not
available any more, because it got consumed by the other domain.
This fixes it by taking video memory from the main memory:
- make hvmloader use e820_malloc to reserve some of the main memory
and notify ioemu of its address through the Xen platform PCI card.
- add XENMAPSPACE_mfn to the xen_add_to_physmap memory op, to allow
ioemu to move the MFNs between the original position and the PCI
mapping, when LFB acceleration is disabled/enabled
- add a remove_from_physmap memory op, to allow ioemu to unmap it
completely for the case of old guests with acceleration disabled.
- add xc_domain_memory_translate_gpfn_list to libxc to allow ioemu to
get the MFNs of the video memory.
- have xend save the PCI memory space instead of ioemu: if a memory
page is there, the guest can access it like usual memory, so xend
can safely be responsible to save it. The extra benefit is that
live migration will apply the logdirty optimization there too.
- handle old saved images, populating the video memory from ioemu if
really needed.
Signed-off-by: Samuel Thibault <samuel.thibault@eu.citrix.com>
In particular:
- BIOS release date
- BIOS characteristics
- BIOS extended characteristics (Targeted Content Distribution is
required to be specified to pass WHQL).
- CPU speed
Based on a patch by Kamala Narasimhan <kamala.narasimhan@citrix.com>
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
Roger Pau Monné
Boris Ostrovsky
Jan Beulich
Anthony PERARD
Ian Campbell
Tiejun Chen
David Vrabel
Frediano Ziglio
Keir Fraser
Paul Durrant
Keir Fraser
kfraser@localhost.localdomain
Keir Fraser