Introduce a arch-independent routine to generate one vmemrange per
vnode. Also introduce arch-dependent routines for different
architectures because part of the process is arch-specific -- ARM has
yet have NUMA support and E820 is x86 only.
For those x86 guests who care about machine E820 map (i.e. with
e820_host=1), vnode is further split into several vmemranges to
accommodate memory holes. A few stubs for libxl_arm.c are created.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Dario Faggioli <dario.faggioli@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Dario Faggioli <dario.faggioli@citrix.com>
Cc: Elena Ufimtseva <ufimtseva@gmail.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
This function is used to check whether vNUMA configuration (be it
auto-generated or supplied by user) is valid.
Define a new error code ERROR_VNUMA_CONFIG_INVALID.
The checks performed can be found in the comment of the function.
This vNUMA function (and future ones) is placed in a new file called
libxl_vnuma.c
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Dario Faggioli <dario.faggioli@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Dario Faggioli <dario.faggioli@citrix.com>
Cc: Elena Ufimtseva <ufimtseva@gmail.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
A vnode consists of one or more vmemranges (virtual memory range). One
example of multiple vmemranges is that there is a hole in one vnode.
Currently we haven't exported vmemrange interface to libxl user.
Vmemranges are generated during domain build, so we have relevant
structures in domain build state.
Later if we discover we need to export the interface, those structures
can be moved to libxl_domain_build_info as well.
These new fields (along with other fields in that struct) are set to 0
at start of day so we don't need to explicitly initialise them. A
following patch which introduces an independent checking function will
need to access these fields. I don't feel very comfortable squashing
this change into that one so I didn't use a single commit.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Dario Faggioli <dario.faggioli@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Dario Faggioli <dario.faggioli@citrix.com>
Cc: Elena Ufimtseva <ufimtseva@gmail.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
From libxc's point of view, it only needs to know vnode to pnode mapping
and size of each vnode to allocate memory accordingly. Add these fields
to xc_dom structure.
The caller might not pass in vNUMA information. In that case, a dummy
layout is generated for the convenience of libxc's allocation code. The
upper layer (libxl etc) still sees the domain has no vNUMA
configuration.
Note that for this patch on PV x86 guest can have multiple regions of
ram allocated.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Dario Faggioli <dario.faggioli@citrix.com>
Cc: Elena Ufimtseva <ufimtseva@gmail.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Add a new field p2m_size to keep track of the number of pages covered by
p2m. Change total_pages to p2m_size in functions which in fact need
the size of p2m.
This is needed because we are going to ditch the assumption that PV x86
has only one contiguous ram region. Originally the p2m size was always
equal to total_pages, but we will soon change that in later patch.
This patch doesn't change the behaviour of libxc.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Dario Faggioli <dario.faggioli@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Currently all in tree code doesn't set the superpage flag, I would just
remove superpage support if I can, but Konrad wants it retained for the
moment.
As I'm going to change the p2m_host array allocation, duplicate the code
snippet to allocate p2m_host array in this patch, so that we retain the
behaviour in superpage case.
This patch introduces no functional change and it will make future patch
easier to review. Also removed one stray tab while I was there.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Konrad Wilk <konrad.wilk@oracle.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Typedefs are duplicated in stubdom/vtpmmgr/tcg.h and supported compilers
do not cope with current staging branch.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Quan Xu <quan.xu@intel.com>
Tested-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
[ ijc -- reworded subject line ]
POLLHUP|POLLIN is a valid revent to receive when there is readable data in a
pipe, but the writable fd has been closed. This occurs in migration v2 when
the legacy conversion process (which transforms the data inline) completes and
exits successfully.
In the case that there is data to read, suppress the POLLHUP. POSIX states
that the hangup state is latched[1], which means it will reoccur on subsequent
poll() calls. The datacopier is thus provided the opportunity to read until
EOF, if possible.
A POLLHUP on its own is treated exactly as before, indicating a different
error with the fd.
[1] http://pubs.opengroup.org/onlinepubs/9699919799/functions/poll.html
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
CC: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Currently a datacopier may source its data from an fd or local buffer, but its
destination must be an fd. For migration v2, libxl needs to read from the
migration stream into a local buffer.
Implement a "read into local buffer" mode, invoked when readbuf is set and
writefd is -1. On success, the callback passes the number of bytes read.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
[Rewrite commit message]
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
CC: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Currently, a datacopier will unconditionally read until EOF on its read fd.
For migration v2, libxl needs to read records of a specific length out of the
migration stream, without reading any further data.
Introduce a parameter, bytes_to_read, which may be used to stop the datacopier
ahead of reaching EOF. If bytes_to_read is set to -1, then the datacopier will
read until EOF.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
[Rewrite commit message]
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
CC: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
An individual datacopier_buf contains a static buffer of 1000 bytes.
Attempting to add prefixdata of more than 1000 bytes would overrun the buffer
and cause heap corruption.
Instead, split the prefixdata and chain together multiple datacopier buffers.
This allows for an arbitrary quantity of prefixdata to be added to a
datacopier.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
CC: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
Currently, starting a datacopier requires a valid read and write fd, but this
is a problem when purely sending data from a local buffer to a writable fd.
The prefixdata mechanism already exists and works for inserting data from a
local buffer ahead of reading from the read fd.
Make the lack of a read fd non-fatal. A datacopier with no read fd, but some
prefixdata will write the prefixdata to the write fd and complete successfully.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
[Rewrite commit message]
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
CC: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
and more consistent. In fact, before this changes, it looks
like this:
(XEN) VCPU information and callbacks for domain 0:
(XEN) VCPU0: CPU4 [has=F] poll=0 upcall_pend = 00, upcall_mask = 00 dirty_cpus={4} cpu_affinity={0-15}
(XEN) cpu_soft_affinity={0-15}
(XEN) pause_count=0 pause_flags=1
(XEN) No periodic timer
After, it looks like this:
(XEN) VCPU information and callbacks for domain 0:
(XEN) VCPU0: CPU4 [has=F] poll=0 upcall_pend=00 upcall_mask=00 dirty_cpus={4}
(XEN) cpu_hard_affinity={0-15} cpu_soft_affinity={0-15}
(XEN) pause_count=0 pause_flags=1
(XEN) No periodic timer
So, consistently _not_ put space between fields and '=',
and consistently _not_ use ',' as separator. Also, put the
info about affinity on the same, properly indented.
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Reviewed-by: George Dunlap <george.dunlap@eu.citrix.com>
Reviewed-by: Meng Xu <mengxu@cis.upenn.edu>
which is called by cpu_schedule_down(), and is necessary
for resetting the spinlock pointers in schedule_data from
the RTDS global runqueue lock, back to the default _lock
fields in the struct.
Not doing so causes Xen to explode, e.g., when removing
pCPUs from an RTDS cpupool and assigning them to another
one.
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Reviewed-by: Meng Xu <mengxu@cis.upenn.edu>
Reviewed-by: George Dunlap <george.dunlap@eu.citrix.com>
Make XENMEM_increase_reservation and XENMEM_populate_physmap
vNUMA-aware.
That is, if guest requests Xen to allocate memory for specific vnode,
Xen can translate vnode to pnode using vNUMA information of that guest.
XENMEMF_vnode is introduced for the guest to mark the node number is in
fact virtual node number and should be translated by Xen.
XENFEAT_memory_op_vnode_supported is introduced to indicate that Xen is
able to translate virtual node to physical node.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Hand struct domain via struct memops_arg's respective field to
construct_memop_from_reservation().
Signed-off-by: Jan Beulich <jbeulich@suse.com>
This adds support in the hypervisor and policy build toolchain for
Xen/Flask policy version 30, which adds the ability to label ARM device
tree nodes and expands the IOMEM ocontext entries to 64 bits.
Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Tested-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
for events that are specific to Credit2 (as it happens for Credit1
already). Re-use Credit1's vcpu_check counter by making it generic.
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: George Dunlap <george.dunlap@eu.citrix.com>
The way this method works allows for honoring "warm" reboot requested
by the user and additionally has a way to power-cycle the machine.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
EACCES cannot be distinguished against an incorrect DOMCTL_INTERFACE_VERSION,
and will cause an incorrect "need to rebuild the user-space tool set?" message
from libxc.
On the libxc side, put the useful piece of information in the error message,
rathe than the -1 from do_domctl().
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
The implementation was backwards and checked that the guest could
read when asked about write and vice versa.
This is an update to the fix for XSA-98.
Reported-by: Tamas K Lengyel <tklengyel@sec.in.tum.de>
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
If reboot= is specified on the command-line, don't apply reboot quirks
to allow the command-line option to take precedence.
This is a port of Linux commit 5955633e91bf ("x86/reboot: Skip DMI
checks if reboot set by user").
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Leverage (and make apply on top of) c643fb110a ("x86/EFI: allow
reboot= overrides when running under EFI").
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
This reverts commit 93be8285a7.
At the point this patch calls domain_update_node_affinity(), the vcpu
hard affinities have not yet been updated; so calling it at this point
can in some circumstances trigger an ASSERT().
domain_update_node_affinity() is already called in
cpu_disable_scheduler(), so adding it to cpupool_unassign_cpu() is
redundant. Simply reverting the patch is sufficient.
Acked-by: George Dunlap <george.dunlap@eu.citrix.com>
By default we will always use EFI reboot mechanism when
running under EFI platforms. However some EFI platforms
are buggy and need to use the ACPI mechanism to
reboot (such as Lenovo ThinkCentre M57). As such
respect the 'reboot=' override and DMI overrides
for EFI platforms.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
- BOOT_INVALID is just zero
- also consider acpi_disabled in BOOT_INVALID resolution
- duplicate BOOT_INVALID resolution in machine_restart()
- don't fall back from BOOT_ACPI to BOOT_EFI (if it was overridden, it
surely was for a reason)
- adjust doc change formatting
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Use + on outputs instead of = and a matching input. Allow not just
memory for the _eflags operand (it turns out that recent gcc produces
worse code when also doing this for _dst.val, so the latter is being
avoided).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Tim Deegan <tim@xen.org>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
By default qemu will try to create some sort of backend for the
emulated VGA device, either SDL or VNC.
However when the user specifies sdl=0 and vnc=0 in their configuration
libxl was not explicitly disabling either backend, which could lead to
one unexpectedly running.
If either sdl=1 or vnc=1 is configured then both before and after this
change only the backends which are explicitly enabled are configured,
i.e. this issue only occurs when all backends are supposed to have
been disabled.
This affects qemu-xen and qemu-xen-traditional differently.
If qemu-xen was compiled with SDL support then this would result in an
SDL window being opened if $DISPLAY is valid, or a failure to start
the guest if not. Passing "-display none" to qemu before any further
-sdl options disables this default behaviour and ensures that SDL is
only started if the libxl configuration demands it.
If qemu-xen was compiled without SDL support then qemu would instead
start a VNC server listening on ::1 (IPv6 localhost) or 127.0.0.1
(IPv4 localhost) with IPv6 preferred if available. Explicitly pass
"-vnc none" when vnc is not enabled in the libxl configuration to
remove this possibility.
qemu-xen-traditional would never start a vnc backend unless asked.
However by default it will start an SDL backend, the way to disable
this is to pass a -vnc option. In other words passing "-vnc none" will
disable both vnc and sdl by default. sdl can then be reenabled if
configured by subsequent use of the -sdl option.
Tested with both qemu-xen and qemu-xen-traditional built with SDL
support and:
xl cr # defaults
xl cr sdl=0 vnc=0
xl cr sdl=1 vnc=0
xl cr sdl=0 vnc=1
xl cr sdl=0 vnc=0 vga=\"none\"
xl cr sdl=0 vnc=0 nographic=1
with both valid and invalid $DISPLAY.
This is XSA-119 / CVE-2015-2152.
Reported-by: Sander Eikelenboom <linux@eikelenboom.it>
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
The 'private' field in io/ring.h (for blktap2, see 1b9cecdb)
is the last thing in the Xen public headers that a C++ compiler
will object to.
Rename it to pvt, update the only in-tree user, and remove the
workaround in the C++ compatibility check.
Signed-off-by: Tim Deegan <tim@xen.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
as 0bba5747f4 ("xen: sched_credit: define and use
curr_on_cpu(cpu)") did for Credit1, hence making the code more
consistent and easier to read.
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Reviewed-by: George Dunlap <george.dunlap@eu.citrix.com>
The commit 7978429 "iommu: fix usage of shared EPT/IOMMU page tables on
PVH guests" breaks the hypervisor compilation on ARM.
This is because the macro hap_enabled is not defined on ARM.
On x86, the P2M can only be shared when hap is enabled and the user
didn't deny it (via the command line). Those checks are done by
iommu_use_hap_pt().
On ARM, the macro iommu_use_hap_pt() is also defined. So move the
if ( iommu_use_hap_pt(d) ) from the IOMMU drivers up to
iommu_share_p2m_table.
Suggested-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Reviewed-by: Ian Campbell <ian.campbell@citrix.com>
If the cfg file includes root= but not extra= (nor cmdline=, which
supercedes both) then the command line will end up with an extra
"(null)" on it (at least with glibc's implementation of asprintf).
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Chunyan Liu <cyliu@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Wei Liu
Quan Xu
Andrew Cooper
Ross Lagerwall
Wen Congyang
Dario Faggioli
Daniel De Graaf
Ian Campbell
Jan Beulich
Konrad Rzeszutek Wilk
Tim Deegan
Julien Grall
Edgar E. Iglesias