of the encoding used, one still may not include non-printable characters in an
XML document. When a dmesg contains a ^D character, something seen on one of
our test machines, an invalid XML document is generated.
Use a trick by David Mertz to work around this -- escape the string using
Python's repr function.
Signed-off-by: Ewan Mellor <ewan@xensource.com>
ports, as binding them in user space via the evtchn driver
would be a pain. Instead extend VIRQs so they can be
classified as 'global' or 'per vcpu'. The former can only
be allocated once per guest, but can be re-bound to
an arbitrary VCPU.
Signed-off-by: Keir Fraser <keir@xensource.com>
in the configuration space overlay functions. The wrong offset is passed
to the virtual field handlers. This patch uses the variable which
contains the correct offset. This patch also fixes the logic which
generates the actual value to write to a given virtual configuration
space field.
Signed-off-by: Ryan Wilson <hap9@epoch.ncsc.mil>
Compaq/HP notebooks), where Linux already has code to deal with
that. Apparently that code was either deleted during the original port
or got added to Linux after the original port was done. Anyway, this
patch adds the respective Linux code (slightly adjusted) to deal with
the same systems in Xen.
From: Jan Beulich
Signed-off-by: Keir Fraser <keir@xensource.com>
stack dumps on i386 came out at 81 characters per line. The change to
xen/arch/x86/traps.c makes this 80 (without changing the look on the
screen), and the change to xen/drivers/char/console.c arranges for
soft line breaks not getting duplicated by hard line breaks, so
displaying 80 characters per line doesn't result in a subsequent blank
line.
From: Jan Beulich
Signed-off-by: Keir Fraser <keir@xensource.com>
hvm_pio_assist(). Also, cleaned up a bit of duplicate code in the
functions. Simple guest tests (ide pio) pass now for overlapped/rep
write operations.
Signed-off-by: Tom Woller <thomas.woller@amd.com>
Signed-off-by: Mats Petersson <mats.petersson@amd.com>
replaced with unconditional static 'sane' implementations.
Functions relating to interrupt/IPI delivery have been
grouped into two sets: physical delivery and logical-flat
delivery. All subarchitectures use physical delivery except
the basic default subarchitecture.
The main behavioural changes are:
1. Summit no longer uses logical-clustered delivery mode
2. Physical mode no longer makes any pretence to set the
LDR sanely. We never deliver interrupts in logical mode
so this really should not matter.
3. Sanity checking of phys_cpu_present_map is enabled
for all subarchitectures. Really we should have a sane
set of APIC IDs in the system, as we rely on them for
physical delivery mode.
4. We enable 'bigsmp' mode on any system with more than
eight CPUs. The previous xAPIC check was unnecessary,
since our bigsmp mode uses physical delivery, not
logical-clustered.
This all obviously needs testing on some big systems.
Signed-off-by: Keir Fraser <keir@xensource.com>
UTF-8 if given a string containing high-bit characters, so instead pass in
Unicode strings, for which the escaping is correct.
This fixes a bug seen when the dmesg of a machine contains high bit characters,
but I'm sure there are other ways in which it might be triggered.
Signed-off-by: Ewan Mellor <ewan@xensource.com>
backend has been removed there are still requests pending. This patch
flushed all the pending requests.
Signed-off-by: Stefan Berger <stefanb@us.ibm.com>
As reported in the thread:
http://lists.xensource.com/archives/html/xen-users/2006-03/msg00721.html,
pygrub does not open ext2 file systems in partitioned images or sub
partitions on e.g. CentOS/RHEL 4, because e2fsprogs ext2fs_open does not
support an offset into the file to be opened.
With this patch, the error is correctly reported instead of a generic
"unable to open file" (and leaving the user searching in the dark).
Signed-off-by: Michael Paesold <mpaesold@gmx.at>
shortcutting IPI functions. They're either unused or used so
frequently that we may as well simplify things and always use
send_IPI_mask.
Signed-off-by: Keir Fraser <keir@xensource.com>
just not initialising xenbus/store when the supervisor_mode_kernel
feature flag is enabled.
When initialising grant tables only -ENOSYS is a valid reason
to fail so BUG_ON anything else like we did prior to changeset
9498.
Signed-off-by: Ian Campbell <ian.campbell@xensource.com>
Largely this involves making the logic symmetrical: for example,
not only should netfront be able to tell netback that a packet has
an empty protocol checksum field, but the reverse must also be true.
Another change is that the drivers only advertise IP checksum
offload functionality. There is currently no information
propagated across the device channel about the offset of the
protocol-specific checksum field. Therefore it is not safe to
defer checksum calculation for protocols the remote end may not
understand -- it will end up dropping having to drop the packet.
Yet another change is to allow netback to disable tx checksum
offload, just as we already could for netfront. Currently there is
no support for disabling rx checksum offload -- that would seem
to require some way of propagating the checksum-offload advertisement
(or lack of it) across the device channel, as it really ought to be
the transmitter that acts on it.
Thanks to Ian Jackson for pointing out some of the problems with
our checksum-offload handling. Several of the changes here are
due to his comments.
Signed-off-by: Keir Fraser <keir@xensource.com>
an exception is thrown. The test that decides which exception to throw
is backwards, resulting in strange error messages. The attached patch
fixes the problem.
Signed-off-by: Charles Coffing <ccoffing@novell.com>
systems.
In FC5, gcc has issues with the command lines used to build
hvmloader and vmxassist. Basically, the compiler doesn't
like the combination of -m64 and -m32. As these are 32 bit
apps, and intended to be, take a modified approach and simply
define XEN_TARGET_ARCH for 32 bits. This cleans up the
command line and builds the images correctly.
From: Ben Thomas <ben@virtualiron.com>
Signed-off-by: Keir Fraser <keir@xensource.com>
an emergency pool of pages below 4GB (i.e., in Xen's DMA pool)
which will ever be used to satisfy normal allocation requests.
This is particularly useful in an i386 PAE environment to ensure
that pages will always be available for allocation as
page-table base directories.
Usage, for example (to reserve 16MB):
lowmem_emergency_pool=16M
In a PAE environment, each reserved megabyte guarantees you should
be able to create up to 256 processes (counted across all guests).
16MB means you're good for 4096 processes.
Signed-off-by: Keir Fraser <keir@xensource.com>
Instead of setting the highest bit (which isn't easily done on native x86_64),
negate the interrupt vector stored in orig_{e,r}ax.
Also add patch for native build.
Signed-off-by: Christian Limpach <Christian.Limpach@cl.cam.ac.uk>
and xend into xm guest config files.
A new vif parameter 'rate' is supported, with an optional time window
paremeter for specifying granularity of credit replenishment. The default
window is 50ms. For example:
'rate=10Mb/s' 'rate=250KB/s' 'rate=1MB/s@20ms'
From: Chris Clark <christopher.w.clark@gmail.com>
Signed-off-by: Keir Fraser <keir@xensource.com>
file. If that is not specified, then xm will pass the XAUTHORITY
environment variable back to xend instead. This is not sufficient,
since it is possible that XAUTHORITY is not set at all. This doesn't
cause a problem for most X apps, because xlib will use the fall-back of
$HOME/.Xauthority. But the viewer is started from xend, which almost
certainly doesn't have a reasonable HOME variable.
We fix this by always passing some value for
XAUTHORITY. In order of preference, that value is:
1. Use the value from the config file, if specified.
2. Use the value from the XAUTHORITY env variable, if set.
3. Use $HOME/.Xauthority, if HOME is set.
4. Look up the user's home directory via getpwuid, and append
"/.Xauthority"
Signed-off-by: Charles Coffing <ccoffing@novell.com>
1. Make __softirq_pending a long, since PPC borrows the file
hardirq.h from us and they only do atomic ops on longs.
2. do_softirq() explicitly takes a void param list.
3. Remove idle_timestamp field from irq_cpustat. It's unused
and lets us simplify the idle loop a little bit.
Part 1 based on a patch from Hollis Blanchard at IBM.
Signed-off-by: Keir Fraser <keir@xensource.com>
Neither of these features are useful/available in this mode since only a
single domain is supported.
Do not attempt to initialise xen bus when supervisor_mode_kernel is
enabled.
Do not BUG_ON() failure to setup grant tables, future versions
of supervisor_mode_kernel may return -ENOSYS here.
Signed-off-by: Ian Campbell <ian.campbell@xensource.com>
