Commit 1b00c16bdf ("AMD/IOMMU: pre-fill all DTEs right after table
allocation") moved ourselves into a more secure default state, but
didn't take sufficient care to also undo the effects when handing a
previously disabled device back to a(nother) domain. Put the fields
that may have been changed elsewhere back to their intended values
(some fields amd_iommu_disable_domain_device() touches don't
currently get written anywhere else, and hence don't need modifying
here).
Reported-by: Sander Eikelenboom <linux@eikelenboom.it>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Tested-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
libxl__dm_resume() is using a wrong timeout for the start of the
device model. Instead of 60 seconds the timeout is set to 60
milliseconds.
Reported-by: Roman Shaposhnik <roman@zededa.com>
Fixes: 6298f0eb8f ("libxl: Re-introduce libxl__domain_resume")
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wl@xen.org>
Release-acked-by: Juergen Gross <jgross@suse.com>
Both are now potentially asynchronous; pass in 'nil' to retain
synchronous behavior.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
c/s bb038f3116 "AMD/IOMMU: replace INTREMAP_ENTRIES" introduces a call to
intremap_table_entries() in dump_intremap_table() before tbl.ptr is checked
for NULL.
intremap_table_entries() internally uses virt_to_page() which falls over
ASSERT(va >= XEN_VIRT_START);
in __virt_to_page().
Reported-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
See patch documentation and comments.
This is part of XSA-305 / CVE-2019-11135
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
To protect against the TSX Async Abort speculative vulnerability, Intel have
released new microcode for affected parts which introduce the MSR_TSX_CTRL
control, which allows TSX to be turned off. This will be architectural on
future parts.
Introduce tsx= to provide a global on/off for TSX, including its enumeration
via CPUID. Provide stub virtualisation of this MSR, as it is not exposed to
guests at the moment.
VMs may have booted before microcode is loaded, or before hosts have rebooted,
and they still want to migrate freely. A VM which booted seeing TSX can
migrate safely to hosts with TSX disabled - TSX will start unconditionally
aborting, but still behave in a manner compatible with the ABI.
The guest-visible behaviour is equivalent to late loading the microcode and
setting the RTM_DISABLE bit in the course of live patching.
This is part of XSA-305 / CVE-2019-11135
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
CVE-2018-12207 covers a set of errata on various Intel processors, whereby a
machine check exception can be generated in a corner case when an executable
mapping changes size or cacheability without TLB invalidation. HVM guest
kernels can trigger this to DoS the host.
To mitigate, in affected hardware, all EPT superpages are marked NX. When an
instruction fetch violation is observed against the superpage, the superpage
is shattered to 4k and has execute permissions restored. This prevents the
guest kernel from being able to create the necessary preconditions in the iTLB
to exploit the vulnerability.
This does come with a workload-dependent performance overhead, caused by
increased TLB pressure. Performance can be restored, if guest kernels are
trusted not to mount an attack, by specifying ept=exec-sp on the command line.
This is part of XSA-304 / CVE-2018-12207
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: George Dunlap <george.dunlap@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Something causes SandyBridge IOMMUs to choke when sharing EPT pagetables, and
an EPT superpage gets shattered. The root cause is still under investigation,
but the end result is unusable in combination with CVE-2018-12207 protections.
This is part of XSA-304 / CVE-2018-12207
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
In a dom0less configuration, if the null scheduler is used, the system
may fail to boot, because the loop in null_unit_wake() never exits.
Bisection showed that this behavior occurs since commit d545f1d6 ("xen:
sched: deal with vCPUs being or becoming online or offline") but the
real problem is that, in this case, pick_res() always return the same
CPU.
Fix this by only deal with the simple case, i.e., the vCPU that is
coming online can be assigned to a sched. resource right away, in
null_unit_wake().
If it can't, just add it to the waitqueue, and we will deal with it in
null_schedule(), being careful about not racing with vcpu_wake().
Reported-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Tested-by: Stefano Stabellini <sstabellini@kernel.org>
Release-acked-by: Juergen Gross <jgross@suse.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
If an error were to happen before the last step, for example the
domain_configuration is missing, the error wouldn't be checked by the
_end callback.
Fix that, also initialise `lock' to NULL because the exit path checks
it.
The issue shows up when there's a stubdom, and running `xl list -l`
aborts. Instead, with this patch, `xl list -l` will not list stubdom,
probably like before.
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Fixes: 6156341925
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-by: Wei Liu <wl@xen.org>
Release-acked-by: Juergen Gross <jgross@suse.com>
"AMD/IOMMU: don't blindly allocate interrupt remapping tables" introduces a
call at runtime from amd_iommu_add_device() to amd_iommu_set_intremap_table()
which is still marked as __init.
On one AMD Rome machine we have, this results in a crash the moment we try to
use an SR-IOV VF in a VM.
Reported-by: Jennifer Herbert <jennifer.herbert@citrix.com>
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
The vif-route script should only call 'ip route' when 'ipcmd' has been
set, otherwise it will fail due to an incorrect command string.
This patch also adds routes for 'tap' (i.e. emulated) devices as well as
'vif' (i.e. PV) devices. Empirically offline/online commands relate to
'vif' devices, and add/remove commands relate to 'tap' devices. However,
this patch treats them equally and uses ${type_if} to distinguish. By
adding cases for add/remove the command list becomes exhaustive and hence
'ipcmd' is guaranteed to be set.
Routes for 'tap' and 'vif' devices are distinguished by a route metric.
Emulated devices are used by HVM guests until they are unplugged, at which
point the PV device becomes active. Thus 'tap' devices should get a higher
priority (i.e. lower numbered) metric than 'vif' devices.
There is also one small whitespace fix.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Acked-by: Wei Liu <wl@xen.org>
Release-acked-by: Juergen Gross <jgross@suse.com>
Before 93dcc22, error from setting the vnc password to an empty
string, when QEMU wasn't expected a password, never prevented the creation
of a guest, and only logged an error message.
Reported-by: Roger Pau Monné <roger.pau@citrix.com>
Fixes: 93dcc22fe7
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Wei Liu <wl@xen.org>
Release-acked-by: Juergen Gross <jgross@suse.com>
c-indent-level isn't considered a safe variable, and "solaris" isn't a
recognised C style. Both cause prompts when opening the files.
Fix all blocks up per CODING_STYLE
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wl@xen.org>
Release-acked-by: Juergen Gross <jgross@suse.com>
cpupool_online_cpumask() is used by credit and rt scheduler. It returns
all the cpus of a cpupool or all online cpus in case no cpupool is
specified.
The "no cpupool" case can be dropped, as no scheduler other than the
init scheduler will ever work on cpus not associated with any cpupool.
As the individual schedulers should only ever work on scheduling
resources instead of individual cpus, their cpupool_online_cpumask()
use should be replaced by cpupool->res_valid.
Note that only with core scheduling active this might result in
potential problems, as with cpu scheduling both masks are identical.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Dario Faggioli <dfaggioli@suse.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
Unmapping a page which has never been mapped should be a no-op (note how
it already is in case there was no root page table allocated). There's
in particular no need to grow the number of page table levels in use,
and there's also no need to allocate intermediate page tables except
when needing to split a large page.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
clear_IO_APIC_pin can be called after the iommu has been enabled, and
using raw reads and writes to modify IO-APIC entries that have been
setup to use interrupt remapping can lead to issues as some of the
fields have different meaning when the IO-APIC entry is setup to point
to an interrupt remapping table entry.
The following ASSERT in AMD IOMMU code triggers afterwards as a result
of the raw changes to IO-APIC entries performed by clear_IO_APIC_pin.
(XEN) [ 10.082154] ENABLING IO-APIC IRQs
(XEN) [ 10.087789] -> Using new ACK method
(XEN) [ 10.093738] Assertion 'get_rte_index(rte) == offset' failed at iommu_intr.c:328
Fix this by making sure that modifications to entries are performed in
non raw mode when fields are affected which may either have changed
meaning with interrupt remapping, or which may need mirroring into
IRTEs.
Reported-by: Sergey Dyasli <sergey.dyasli@citrix.com>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
And instead use proper booleans. No functional change intended.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Add DornerWorks internal list. This will forward to relevant people
within DornerWorks.
Add myself to MAINTAINERS for ARINC653 scheduler.
Remove Robbie from MAINTAINERS for ARINC653 scheduler.
Signed-off-by: Stewart Hildebrand <stewart.hildebrand@dornerworks.com>
When a SError/Asynchronous Abort generated by the guest has been
consumed, we will skip the handling of the initial exception.
This includes the calls to enter_hypervisor_from_guest{, _noirq} that
is used to synchronize part of the guest state with the internal
representation and re-enable workarounds (e.g. SSBD). However, we still
call leave_hypervisor_to_guest() which is used for preempting the guest
and synchronizing back part of the guest state.
enter_hypervisor_from_guest{, _noirq} works in pair with
leave_hypervisor_to_guest(), so skipping the first two may result
in a loss of some part of guest state.
An example is the new vGIC which will save the state of the LRs on exit
from the guest and rewrite all of them on entry to the guest.
A more worrying example is SSBD workaround may not be re-enabled. If
leave_hypervisor_to_guest() is rescheduling the vCPU, then we may end to
run a lot of code with SSBD workaroud disabled.
For now, calling leave_hypervisor_to_guest() is not necessary when
injecting a vSError to the guest. But it would still be good to give an
opportunity to reschedule. So both enter_hypervisor_from_guest() and
leave_hypervisor_to_guest() are called.
Note that on arm64, the return value for check_pending_vserror is now
stored in x19 instead of x0. This is because we want to keep the value
across call to C-functions (x0, unlike x19, will not be saved by the
callee).
Take the opportunity to rename check_pending_vserror() to
check_pending_guest_serror() as the function is dealing with host SError
and *not* virtual SError. The documentation is also updated accross
Arm32 and Arm64 to clarify how Xen is dealing with SError generated by
the guest.
Signed-off-by: Julien Grall <julien.grall@arm.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Release-acked-by: Juergen Gross <jgross@suse.com>
The macro SYNCHRONIZE_SERROR() has an assert to check whether it will
be called with Abort interrupt unmasked. However, this is only done if
a given cap is not enabled.
None of the callers will treat the abort interrupt differently
depending on a feature. Furthermore, it makes more difficult to check
whether SYNCHRONIZE_SERROR() is going to be called with abort interrupt
unmasked.
Therefore, we now require the abort interrupt to be unmasked regardless
the state of the cap.
Signed-off-by: Julien Grall <julien.grall@arm.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Release-acked-by: Juergen Gross <jgross@suse.com>
Using alternative_if makes the code a bit more streamlined.
Take the opportunity to use the new auto-nop infrastructure to avoid
counting the number of nop in the else part for arch/arm/arm64/entry.S
Signed-off-by: Julien Grall <julien.grall@arm.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Release-acked-by: Juergen Gross <jgross@suse.com>
In some cases, one side of an alternative sequence is simply a number of
NOPs used to balance the other side. Keeping track of this manually is
tedious, and the presence of large chains of NOPs makes the code more
painful to read than necessary.
To ameliorate matters, this patch adds a new alternative_else_nop_endif,
which automatically balances an alternative sequence with a trivial NOP
sled.
In many cases, we would like a NOP-sled in the default case, and
instructions patched in in the presence of a feature. To enable the NOPs
to be generated automatically for this case, this patch also adds a new
alternative_if, and updates alternative_else and alternative_endif to
work with either alternative_if or alternative_endif.
The alternative infrastructure was originally ported from Linux. So this
is pretty much a straight backport from commit 792d47379f4d "arm64:
alternative: add auto-nop infrastructure". The only difference is the
nops macro added as not yet existing in Xen.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
[will: use new nops macro to generate nop sequences]
Signed-off-by: Will Deacon <will.deacon@arm.com>
[julien: Add nops and port to Xen]
Signed-off-by: Julien Grall <julien.grall@arm.com>
Reviewed-by: Volodymyr Babchuk <volodymyr_babchuk@epam.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Release-acked-by: Juergen Gross <jgross@suse.com>
A follow-up patch will require to include insn.h from assembly code. So
we need to protect any C-specific definition to avoid compilation
errors when used in assembly code.
Signed-off-by: Julien Grall <julien.grall@arm.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Release-acked-by: Juergen Gross <jgross@suse.com>
At the moment, ARCH_PATCH_INSN_SIZE is defined in the header
livepatch.h. However, this is also used in the alternative code.
Rather than including livepatch.h just for using the define, move it in
the header insn.h which seems more suitable.
Signed-off-by: Julien Grall <julien.grall@arm.com>
Reviewed-by: Volodymyr Babchuk <volodymyr_babchuk@epam.com>
Reviewed-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Release-acked-by: Juergen Gross <jgross@suse.com>
The macro alternative_if_not_cap is taking two parameters. The second
parameter is never used and it is hard to see how this can be used
correctly as it is only protecting the alternative section magic.
Signed-off-by: Julien Grall <julien.grall@arm.com>
Reviewed-by: Volodymyr Babchuk <volodymyr.babchuk@epam.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Release-acked-by: Juergen Gross <jgross@suse.com>
serrors= only supports 3 values "diverse", "forward" and "panic".
The current implementation of parse_serrors_behavior() will default to
"diverse" for any invalid value and not tell the users.
Rather than ignore the invalid input, return an error to the caller so
it can decides the be approach.
This will be useful after a follow-up patch where the number of options
will be reduced.
Take the opportunity to initialize serrors_op to SERRORS_DIVERSE rather
than relying on the item to be the first in the enum and therefore
equal to 0.
Signed-off-by: Julien Grall <julien.grall@arm.com>
Reviewed-by: Stefano Stabellin <sstabellini@kernel.org>
Release-acked-by: Juergen Gross <jgross@suse.com>
At the moment, SSBD workaround is re-enabled for Xen after interrupts
are unmasked. This means we may end up to execute some part of the
hypervisor if an interrupt is received before the workaround is
re-enabled.
Each trap may require to unmask different interrupts.
As the rest of enter_hypervisor_from_guest() does not require to have
interrupts masked, the function is now split in two parts:
1) enter_hypervisor_from_guest_preirq() called with interrupts
masked.
2) enter_hypervisor_from_guest() called with interrupts unmasked.
Note that while it might be possible to avoid spliting the function in
two parts, it requires a bit more work than I can currently invest to
avoid using indirect branch.
Furthermore, the function name is rather generic as there might be more
work to dob before interrupts are unmasked in the future.
Fixes: a7898e4c59 ("xen/arm: Add ARCH_WORKAROUND_2 support for guests")
Reported-by: Andrii Anisov <andrii_anisov@epam.com>
Signed-off-by: Julien Grall <julien.grall@arm.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Release-acked-by: Juergen Gross <jgross@suse.com>
The function save_guest_regs() is doing more than saving guest
registers. It also restore the vectors table and consume any pending
SErrors generated by the guest. So rename the function to
prepare_context_from_guest().
Take the opportunity to use ENDPROC() for the benefits of static
analizer and the reader.
Signed-off-by: Julien Grall <julien.grall@arm.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
At the moment, enter_hypervisor_head() and leave_hypervisor_tail() are
used to deal with actions to be done before/after any guest request is
handled.
While they are meant to work in pair, the former is called for most of
the traps, including traps from the same exception level (i.e.
hypervisor) whilst the latter will only be called when returning to the
guest.
As pointed out, the enter_hypervisor_head() is not called from all the
traps, so this makes potentially difficult to extend it for the dealing
with same exception level.
Furthermore, some assembly only path will require to call
enter_hypervisor_tail(). So the function is now directly call by
assembly in for guest vector only. This means that the check whether we
are called in a guest trap can now be removed.
Take the opportunity to rename enter_hypervisor_tail() and
leave_hypervisor_tail() to something more meaningful and document them.
This should help everyone to understand the purpose of the two
functions.
Note that enter_hypervisor_tail() does not take any parameters anymore
as after the rework, the code does not use them anymore.
Signed-off-by: Julien Grall <julien.grall@arm.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Release-acked-by: Juergen Gross <jgross@suse.com>
At the moment, when we receive an SError exception from the guest, we
don't check if there are any other pending. For hardening the code, we
should ensure any pending SError are accounted to the guest before
executing any code with SError unmasked.
The recently introduced macro 'guest_vector' could used to generate the
two vectors and therefore take advantage of any change required in the
future.
Signed-off-by: Julien Grall <julien.grall@arm.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Release-acked-by: Juergen Gross <jgross@suse.com>
Most of the guest vectors are using the same pattern. This makes fairly
tedious to alter the pattern and risk introducing mistakes when updating
each path.
A new macro is introduced to generate the guest vectors and now use it
in the one that use the open-code version.
Signed-off-by: Julien Grall <julien.grall@arm.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Release-acked-by: Juergen Gross <jgross@suse.com>
At the moment, the interrupts to mask/unmask are hardcoded in the code
making more difficult to find out what's going on.
A new series of short-hand specific to the file entry.S is now added.
The name of the short-hands should tell which interrupts will be
changed by the msr daif{set, clr} instructions.
Take the opportunity to replace the hardcoded values with the new
short-hands.
Signed-off-by: Julien Grall <julien.grall@arm.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Release-acked-by: Juergen Gross <jgross@suse.com>
When injecting a virtual Abort to the guest, we want to update the guest
PC so it can re-execute the HVC/SMC once it has handled the SError.
This is unfortunately not the case when the SError is synchronized on
entry from the guest. As the SError will be received while running in
hypervisor context, we will update the PC of hypervisor context (i.e
the trap).
Rework inject_vabt_exception so it uses the guest context rather than
the current one.
Signed-off-by: Julien Grall <julien.grall@arm.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Release-acked-by: Juergen Gross <jgross@suse.com>
The current documentation is misleading for a few reasons:
1) The synchronization happens on all exit/entry from/to the guest.
This includes from EL0 (i.e userspace).
2) Trusted guest can also generate SErrors (e.g. memory failure)
3) Without RAS support, SErrors are IMP DEFINED. Unless you have a
complete TRM in hand, you can't really make a decision.
4) The documentation is written around performance when this is not
the first concern.
The documentation is now reworked to focus on the consequences of using
serrors="panic" and avoid to go in details on the exact implementation.
Signed-off-by: Julien Grall <julien.grall@arm.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Release-acked-by: Juergen Gross <jgross@suse.com>
The documentation on top of __do_serror() is trying to describe all the
possibilities to receive an SErrors.
The description of type#2 is quite misleading because receiving an
SError in EL2 after unmasking SError interrupt ({PSTATE, CPSR}.A) does
not necessarily imply the SError were generated by the guest. You also
need to be in a special window (see abort_guest_exist_{guest, end}).
However, for the context of the function it does not matter how we
categorize the interrupts. What matter is to know whether this is a
guest-generated SError.
All the documentation of __do_serror() is now reworked to avoid
misleading information.
Take the opportunity to simplify the code after the forward option has
been dropped.
Signed-off-by: Julien Grall <julien.grall@arm.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Release-acked-by: Juergen Gross <jgross@suse.com>
Per the Arm ARM (D4.5 in ARM DDI 0487E.a), SError may be precise or
imprecise.
Imprecise means the state presented to the exception handler is not
guaranteed to be consistent with any point in the excution stream from
which the exception was taken. In other words, they are likely to be
fatal as you can't return safely from them.
Without the RAS extension, the Arm architecture does not provide a way
to differentiate between imprecise and precise SError. Furthermore Xen
has no support for RAS yet. So from a software POV, there is not much
we can do.
More generally, forwarding blindly SErrors to the guest is likely to be
the wrong thing to do. Indeed, Xen is not able to know what is the
content of the SError. This may be a critical device used by the
hypervisor that is about to fail.
In a nutshell, the option serrors=forward is not safe to use in any
environment with the current state of Xen. Therefore the option and any
code related to it are completely removed.
Take the opportunity to rework the comment in do_trap_data_abort() as
all SErrors/External Abort generated by the hypervisor will result in
a crash of the system no matter what the user passed on the command
line.
Signed-off-by: Julien Grall <julien.grall@arm.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Release-acked-by: Juergen Gross <jgross@suse.com>
When serrors=diverse is selected by the user, we will only synchronize
the pending SErrors on entry to hypervisor from guest context and exit
from guest to hypervisor context.
We don't need synchronize SErrors between guest context switch as they
would be categorized to Hypervisor generated SErrors in any case.
Signed-off-by: Julien Grall <julien.grall@arm.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Release-acked-by: Juergen Gross <jgross@suse.com>
The event channel data was not copied back to guest memory, fix this
by doing the copy.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Wei Liu <wl@xen.org>
Release-acked-by: Juergen Gross <jgross@suse.com>
Originally the gfn and altp2m_idx are assigned from the a.u.mem_access union.
This works because it's the same memory used. This patch addresses this
issue by changing the mem_access union with the suppress_ve union for
consistency.
Signed-off-by: Alexandru Isaila <aisaila@bitdefender.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
PTF_* are declared within CONFIG_PV, and used outside:
mm.c: In function ‘_put_page_type’:
mm.c:2819:32: error: ‘PTF_preemptible’ undeclared (first use in this function)
bool preemptible = flags & PTF_preemptible;
^~~~~~~~~~~~~~~
mm.c:2819:32: note: each undeclared identifier is reported only once for each
function it appears in
mm.c:2842:24: error: ‘PTF_partial_set’ undeclared (first use in this function)
if ( !(flags & PTF_partial_set) )
^~~~~~~~~~~~~~~
mm.c: In function ‘put_page_type_preemptible’:
mm.c:3090:33: error: ‘PTF_preemptible’ undeclared (first use in this function)
return _put_page_type(page, PTF_preemptible, NULL);
^~~~~~~~~~~~~~~
mm.c: In function ‘put_old_guest_table’:
mm.c:3108:25: error: ‘PTF_preemptible’ undeclared (first use in this function)
PTF_preemptible |
^~~~~~~~~~~~~~~
mm.c:3110:27: error: ‘PTF_partial_set’ undeclared (first use in this function)
PTF_partial_set : 0 ),
^~~~~~~~~~~~~~~
mm.c: In function ‘put_page_type_preemptible’:
mm.c:3091:1: error: control reaches end of non-void function
[-Werror=return-type]
}
^
cc1: all warnings being treated as errors
Re-position the definitions to be outside of the #ifdef CONFIG_PV
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Wei Liu <wl@xen.org>
Release-acked-by: Juergen Gross <jgross@suse.com>
Some of the traps without a change of the level (i.e. hypervisor ->
hypervisor) will unmask interrupts regardless the state of them in the
interrupted context.
One of the consequences is IRQ will be unmasked when receiving a
synchronous exception (used by WARN*()). This could result to unexpected
behavior such as deadlock (if a lock was shared with interrupts).
In a nutshell, interrupts should only be unmasked when it is safe to
do. Xen only unmask IRQ and Abort interrupts, so the logic can stay
simple:
- hyp_error: All the interrupts are now kept masked. SError should
be pretty rare and if ever happen then we most likely want to
avoid any other interrupts to be generated. The potential main
"caller" is during virtual SError synchronization on the exit
path from the guest (see check_pending_vserror).
- hyp_sync: The interrupts state is inherited from the interrupted
context.
- hyp_irq: All the interrupts but IRQ state are inherited from the
interrupted context. IRQ is kept masked.
This is part of XSA-303.
Reported-by: Julien Grall <Julien.Grall@arm.com>
Signed-off-by: Julien Grall <julien.grall@arm.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Exception vectors will unmask interrupts regardless the state of them in
the interrupted context.
One of the consequences is IRQ will be unmasked when receiving an
undefined instruction exception (used by WARN*) from the hypervisor.
This could result to unexpected behavior such as deadlock (if a lock was
shared with interrupts).
In a nutshell, interrupts should only be unmasked when it is safe to do.
Xen only unmask IRQ and Abort interrupts, so the logic can stay simple.
As vectors exceptions may be shared between guest and hypervisor, we now
need to have a different policy for the interrupts.
On exception from hypervisor, each vector will select the list of
interrupts to inherit from the interrupted context. Any interrupts not
listed will be kept masked.
On exception from the guest, the Abort and IRQ will be unmasked
depending on the exact vector.
The interrupts will be kept unmasked when the vector cannot used by
either guest or hypervisor.
Note that each vector is not anymore preceded by ALIGN. This is fine
because the alignment is already bigger than what we need.
This is part of XSA-303.
Reported-by: Julien Grall <Julien.Grall@arm.com>
Signed-off-by: Julien Grall <julien.grall@arm.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Follow-up rework will require the macro vector to distinguish between
a trap from a guest vs while in the hypervisor.
The macro SAVE_ALL already has code to distinguish between the two and
it is only called by the vector macro. So fold the former into the
latter. This will help to avoid duplicating the check.
This is part of XSA-303.
Reported-by: Julien Grall <Julien.Grall@arm.com>
Signed-off-by: Julien Grall <julien.grall@arm.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
The preprocessing macro __DEFINE_ENTRY_TRAP is used to generate trap
entry function. While the macro is fairly small today, follow-up patches
will increase the size signicantly.
In general, assembly macros are more readable as they allow you to name
parameters and avoid '\'. So the actual implementation of the trap is
now switched to an assembly macro.
This is part of XSA-303.
Reported-by: Julien Grall <Julien.Grall@arm.com>
Signed-off-by: Julien Grall <julien.grall@arm.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
When a PCI device is assigned to an untrusted domain, it is possible for
that domain to program the device to DMA to an arbitrary address. The
IOMMU is used to protect the host from malicious DMA by making sure that
the device addresses can only target memory assigned to the guest. However,
when the guest domain is torn down the device is assigned back to dom0,
thus allowing any in-flight DMA to potentially target critical host data.
This patch introduces a 'quarantine' for PCI devices using dom_io. When
the toolstack makes a device assignable (by binding it to pciback), it
will now also assign it to DOMID_IO and the device will only be assigned
back to dom0 when the device is made unassignable again. Whilst device is
assignable it will only ever transfer between dom_io and guest domains.
dom_io is actually only used as a sentinel domain for quarantining purposes;
it is not configured with any IOMMU mappings. Assignment to dom_io simply
means that the device's initiator (requestor) identifier is not present in
the IOMMU's device table and thus any DMA transactions issued will be
terminated with a fault condition.
In addition, a fix to assignment handling is made for VT-d. Failure
during the assignment step should not lead to a device still being
associated with its prior owner. Hand the device to DomIO temporarily,
until the assignment step has completed successfully. Remove the PI
hooks from the source domain then earlier as well.
Failure of the recovery reassign_device_ownership() may not go silent:
There e.g. may still be left over RMRR mappings in the domain assignment
to which has failed, and hence we can't allow that domain to continue
executing.
NOTE: This patch also includes one printk() cleanup; the
"XEN_DOMCTL_assign_device: " tag is dropped in iommu_do_pci_domctl(),
since similar printk()-s elsewhere also don't log such a tag.
This is XSA-302.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Jan Beulich
Juergen Gross
George Dunlap
Andrew Cooper
Dario Faggioli
Anthony PERARD
Paul Durrant
Anthony PERARD
Roger Pau Monné
Stewart Hildebrand
Julien Grall
Mark Rutland
Alexandru Stefan ISAILA
Paul Durrant