As specified on Errata 1474:
"A core will fail to exit CC6 after about 1044 days after the last
system reset. The time of failure may vary depending on the spread
spectrum and REFCLK frequency."
Detect when running on AMD Zen2 and setup a timer to prevent entering
C6 after 1000 days of uptime. Take into account the TSC value at boot
in order to account for any time elapsed before Xen has been booted.
Worst case we end up disabling C6 before strictly necessary, but that
would still be safe, and it's better than not taking the TSC value
into account and hanging.
Disable C6 by updating the MSR listed in the revision guide, this
avoids applying workarounds in the CPU idle drivers, as the processor
won't be allowed to enter C6 by the hardware itself.
Print a message once C6 is disabled in order to let the user know.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Give a name to unnamed parameters to address violations of
MISRA C:2012 Rule 8.2 ("Function types shall be in prototype form with
named parameters").
Keep consistency between parameter names and types used in function or
data declarations and the ones used in the corresponding function or
data definitions, thus addressing violations of MISRA C:2012 Rule 8.3
("All declarations of an object or function shall use the same names
and type qualifiers").
No functional changes.
Signed-off-by: Federico Serafini <federico.serafini@bugseng.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Jan Beulich <jbeulich@suse.com>
Give a name to unnamed parameters thus addressing violations of
MISRA C:2012 Rule 8.2 ("Function types shall be in prototype form with
named parameters").
Keep consistency between parameter names and types used in function
declarations and the ones used in the corresponding function
definitions, thus addressing violations of MISRA C:2012 Rule 8.3
("All declarations of an object or function shall use the same names
and type qualifiers").
No functional changes
Signed-off-by: Federico Serafini <federico.serafini@bugseng.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Jan Beulich <jbeulich@suse.com>
Give a name to unnamed parameters thus addressing violations of
MISRA C:2012 Rule 8.2 ("Function types shall be in prototype form with
named parameters").
Keep consistency between parameter names and types used in function
declarations and the ones used in the corresponding function
definitions, thus addressing violations of MISRA C:2012 Rule 8.3
("All declarations of an object or function shall use the same names
and type qualifiers").
No functional changes.
Signed-off-by: Federico Serafini <federico.serafini@bugseng.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Add -e argument to xl console and pass to new escape_character argument
of libxl_console_exec.
Introduce a new API version to support this new argument and advertise
the new functionality in libxl.h
In libxl_console_exec, there are currently two call sites to execl,
which uses varargs, in order to support optionally passing
'start-notify-fd' to the console client. In order to support passing
the 'escape' argument optionally too, refactor to instead have a single
call site to execv, which has the same behavior but takes an array of
arguments.
If -e is not specified, --escape is not passed to the console client and
the existing value (^]) is used as a default.
Update the xl docs.
Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
With GNU make 4.4, the number of execution of the command present in
these $(shell ) increased greatly. This is probably because as of make
4.4, exported variable are also added to the environment of $(shell )
construct.
So to avoid having these command been run more than necessary, we
will replace ?= by an equivalent but with immediate expansion.
Reported-by: Jason Andryuk <jandryuk@gmail.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Tested-by: Jason Andryuk <jandryuk@gmail.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
With GNU make 4.4, the number of execution of the command present in
these $(shell ) increased greatly. This is probably because as of make
4.4, exported variable are also added to the environment of $(shell )
construct.
Also, `make -d` shows a lot of these:
Makefile:15: not recursively expanding XEN_BUILD_DATE to export to shell function
Makefile:16: not recursively expanding XEN_BUILD_TIME to export to shell function
Makefile:17: not recursively expanding XEN_BUILD_HOST to export to shell function
Makefile:14: not recursively expanding XEN_DOMAIN to export to shell function
So to avoid having these command been run more than necessary, we
will replace ?= by an equivalent but with immediate expansion.
Reported-by: Jason Andryuk <jandryuk@gmail.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Tested-by: Jason Andryuk <jandryuk@gmail.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
This line:
val &= ~chickenbit;
ends up truncating val to 32 bits, and turning off various errata workarounds
in Zen2 systems.
Fixes: f91c5ea970 ("x86/amd: Mitigations for Zenbleed")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Change types in function definitions to be consistent with the
corresponding declarations.
This addresses violations of MISRA C:2012 Rule 8.3: "All declarations
of an object or function shall use the same names and type qualifiers".
No functional changes.
Signed-off-by: Federico Serafini <federico.serafini@bugseng.com>
[stefano: fix error in commit message]
Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Rule 5.3 has the following headline:
"An identifier declared in an inner scope shall not hide an
identifier declared in an outer scope"
The function parameters renamed in this patch are hiding a variable defined
in an enclosing scope or a function identifier.
The following renames have been made:
- s/guest_mode/guest_mode_on/ to distinguish from function 'guest_mode'
- s/struct module_name/struct module_info/ to distinguish from the homonymous
parameters, since the structure contains more information than just the name.
- s/file_name/file_info in 'xen/arch/arm/efi/efi-boot.h' for consistency with
the previous renaming.
Signed-off-by: Nicola Vetrini <nicola.vetrini@bugseng.com>
[stefano: fix typo]
Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com>
Acked-by: Julien Grall <jgrall@amazon.com>
These defines are not used by xenalyze.
NR_CPUS will not match what was used for building Xen itself.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: George Dunlap <george.dunlap@cloud.com>
Invoking the --help option of any tool should not return with an error,
if that tool does have a documented and implemented help option.
Adjust the usage() function to exit with either error or success.
Handle the existing entry in the option table to call usage accordingly.
Adjust the getopt value for help. The char '?' is returned for unknown
options. Returning 'h' instead of '?' allows to handle --help.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: George Dunlap <george.dunlap@cloud.com>
The documented option --usage worked because every unknown option
showed the help.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: George Dunlap <george.dunlap@cloud.com>
Change parameter names in function declarations to be consistent with
the corresponding definitions. This addesses violations of MISRA C:2012
Rule 8.3: "All declarations of an object or function shall use the same
names and type qualifiers".
No functional changes.
Signed-off-by: Federico Serafini <federico.serafini@bugseng.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Change names and type qualifiers of parameters in copy_domain_page()
declaration to keep consistency with the corresponding definition.
This addresses violations of MISRA C:2012 Rule 8.3: "All declarations
of an object or function shall use the same names and type qualifiers".
No functional changes.
Signed-off-by: Federico Serafini <federico.serafini@bugseng.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Without it being present it won't be possible to use some
libxl__device_type's callbacks for virtio devices as the common code
can only invoke these callbacks (by dereferencing a pointer) for valid
libxl__device_type's elements when iterating over device_type_tbl[].
Please note, there is no issue within current the code base as virtio
devices don't use callbacks that depend on libxl__virtio_devtype
presence in device_type_tbl[]. The issue will appear as soon as we start
using these callbacks (for example, dm_needed).
Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Preparatory change to unify the IO-APIC pin variable name between
io_apic_read_remap_rte() and amd_iommu_ioapic_update_ire(), so that
the local variable can be made a function parameter with the same name
across vendors.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Do not allow to write to RTE registers using io_apic_write and instead
require changes to RTE to be performed using ioapic_write_entry.
This is in preparation for passing the full contents of the RTE to the
IOMMU interrupt remapping handlers, so remapping entries for IO-APIC
RTEs can be updated atomically when possible.
While immediately this commit might expand the number of MMIO accesses
in order to update an IO-APIC RTE, further changes will benefit from
getting the full RTE value passed to the IOMMU handlers, as the logic
is greatly simplified when the IOMMU handlers can get the complete RTE
value in one go.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Further changes will require access to the full RTE as a single value
in order to pass it to IOMMU interrupt remapping handlers.
No functional change intended.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Change parameter name from 'ptr' to 'v' in the function definition thus
addressing violations of MISRA C:2012 Rule 8.3: "All declarations of an
object or function shall use the same names and type qualifiers".
No functional changes.
Signed-off-by: Federico Serafini <federico.serafini@bugseng.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
At the moment, the temporary mapping is only used when the virtual
runtime region of Xen is clashing with the physical region.
In follow-up patches, we will rework how secondary CPU bring-up works
and it will be convenient to use the fixmap area for accessing
the root page-table (it is per-cpu).
Rework the code to use temporary mapping when the Xen physical address
is not overlapping with the temporary mapping.
This also has the advantage to simplify the logic to identity map
Xen.
Signed-off-by: Julien Grall <jgrall@amazon.com>
----
This patch was originally part of [1] but it was reverted due to
Xen not booting on the Arndale. The second patch of this series
is fixing it (confirmed by booting on the Arndale). So I am including
this patch.
[1] https://lore.kernel.org/xen-devel/20230416143211.72227-1-julien@xen.org/
Changes in new v2:
- Rebase
- Drop reviewed-by tags
Changelog from the previous series:
Changes in v6:
- Add Henry's reviewed-by and tested-by tag
- Add Michal's reviewed-by
- Add newline in remove_identity_mapping for clarity
Changes in v5:
- Fix typo in a comment
- No need to link boot_{second, third}_id again if we need to
create a temporary area.
Changes in v3:
- Resolve conflicts after switching from "ldr rX, <label>" to
"mov_w rX, <label>" in a previous patch
Changes in v2:
- Patch added
Reviewed-by: Henry Wang <Henry.Wang@arm.com>
Reviewed-by: Luca Fancellu <luca.fancellu@arm.com>
Tested-by: Luca Fancellu <luca.fancellu@arm.com>
Give a name to unnamed parameters thus addressing violations of
MISRA C:2012 Rule 8.2 ("Function types shall be in prototype form with
named parameters").
Keep consistency between parameter names and types used in function
declarations and the ones used in the corresponding function
definitions, thus addressing violations of MISRA C:2012 Rule 8.3
("All declarations of an object or function shall use the same names
and type qualifiers").
No functional changes.
Signed-off-by: Federico Serafini <federico.serafini@bugseng.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Rework TEE mediators to put them under a submenu in Kconfig.
The submenu is only visible if UNSUPPORTED is activated as all currently
existing mediators are UNSUPPORTED.
While there rework a bit the configuration so that OP-TEE and FF-A
mediators are selecting the generic TEE interface instead of depending
on it.
Make the TEE option hidden as it is of no interest for anyone to select
it without one of the mediators so having them select it instead should
be enough.
Signed-off-by: Bertrand Marquis <bertrand.marquis@arm.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
Add a wrapper function for tdb_fetch taking the name of the node in
the data base as a parameter. Let it return a data pointer and the
length of the data via a length pointer provided as additional
parameter.
Move logging of the TDB access from the callers into the wrapper.
This enables to make set_tdb_key() and tdb_ctx static.
This is in preparation to replace TDB with a more simple data storage.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
Eliminate further TDB_DATA usage by switching get_acc_data() and
get_acc_domid() from a TDB key to the name of the node in the data base
as a parameter.
This is in preparation to replace TDB with a more simple data storage.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
Rename do_tdb_write() to db_write() and replace the key parameter with
db_name specifying the name of the node in the data base, and the data
parameter with a data pointer and a length.
Do the same key parameter type change for write_node_raw(), too.
This is in preparation to replace TDB with a more simple data storage.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
Rename do_tdb_delete() to db_delete() and replace the key parameter
with db_name specifying the name of the node in the data base.
This is in preparation to replace TDB with a more simple data storage.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
Instead of setting the TDB key for accessing the node in the data base,
let transaction_prepend() return the associated name instead.
This is in preparation to replace TDB with a more simple data storage.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
Instead of storing the TDB key in struct node, only store the name of
the node used to access it in the data base.
Associated with that change replace the key parameter of access_node()
with the equivalent db_name.
This is in preparation to replace TDB with a more simple data storage.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
Instead of using TDB_REPLACE for either creating or modifying a TDB
entry, use either TDB_INSERT or TDB_MODIFY when calling tdb_store().
At higher function levels use the abstract mode values NODE_CREATE
and NODE_MODIFY.
This is for preparing to get rid of TDB, even if it is beneficial
while using TDB, too.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
Add an initial smoke test that boots xen on a ppc64/pseries machine and
checks for a magic string. Based on the riscv smoke test.
Eventually the powernv9 (POWER9 bare metal) machine type will want to be
tested as well, but for now we only boot on pseries.
Signed-off-by: Shawn Anastasio <sanastasio@raptorengineering.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Jiamei Xie <jiamei.xie@arm.com>
Just like it's done for the XEN_DOMCTL_memory_mapping hypercall, add
the permissions checks to vPCI map_range(), which is used to map the
BARs into the domain p2m.
Adding those checks requires that for x86 PVH hardware domain builder
the permissions are set before initializing the IOMMU, or else
attempts to initialize vPCI done as part of IOMMU device setup will
fail due to missing permissions to create the BAR mappings.
While moving the call to dom0_setup_permissions() convert the panic()
used for error handling to a printk, the caller will already panic if
required.
Fixes: 9c244fdef7 ('vpci: add header handlers')
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Rahul Singh <rahul.singh@arm.com>
Tested-by: Rahul Singh <rahul.singh@arm.com>
In case get_spec_node() is being called for a special node starting
with '@' it won't set *canonical_name. This can result in a crash of
xenstored due to dereferencing the uninitialized name in
fire_watches().
This is no security issue as it requires either a privileged caller or
ownership of the special node in question by an unprivileged caller
(which is questionable, as this would make the owner privileged in some
way).
Fixes: d6bb63924f ("tools/xenstore: introduce dummy nodes for special watch paths")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
The return type of canonicalize() can be modified to const char *.
This avoids the need to cast the const away from the input parameter.
There need to be quite some other functions modified to take const
parameters in order to avoid further casts.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
On typical Power VMs (e.g. QEMU's -M pseries), a variety of services
including an early serial console are provided by Open Firmware.
Implement the required interfaces to call into Open Firmware and write
to the serial console.
Since Open Firmware runs in 32-bit Big Endian mode and Xen runs in
64-bit Little Endian mode, a thunk is required to save/restore
any potentially-clobbered registers as well as to perform the
required endianness switch. Thankfully, linux already has such
a routine, which was imported into ppc64/of-call.S.
Support for bare metal (PowerNV) will be implemented in a future
patch.
Signed-off-by: Shawn Anastasio <sanastasio@raptorengineering.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Dom0 may be accessed via telnet, meaning the default escape character
(which is the same as telnet's) cannot be directly used to exit the
console. It would be helpful to make the escape character customizable
in such use cases.
Add --escape argument to console tool for this purpose.
Add argument to getopt options, parse and validate the escape character
and pass value to console_loop.
If --escape is not specified, it falls back to the existing behavior
using DEFAULT_ESCAPE_SEQUENCE.
Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Hongda Deng <hongda.deng@arm.com>
Add two pipelines that analyze an ARM64 and a X86_64 build with the
ECLAIR static analyzer on the guidelines contained in Set1.
The analysis configuration is stored in automation/eclair_analysis.
All commits on the xen-project/xen:staging branch will be analyzed
and their artifacts will be stored indefinitely; the integration will
report differential information with respect to the previous analysis.
All commits on other branches or repositories will be analyzed and
only the last ten artifacts will be kept; the integration will report
differential information with respect to the analysis done on the common
ancestor with xen-project/xen:staging (if available).
Currently the pipeline variable ENABLE_ECLAIR_BOT is set to "n".
Doing so disables the generation of comments with the analysis summary
on the commit threads. The variable can be set to "y" if the a masked
variable named ECLAIR_BOT_TOKEN is set with the impersonation token of
an account with enough privileges to write on all repositories.
Additionaly any repository should be able to read a masked variable
named WTOKEN with the token provided by BUGSENG.
The analysis fails if it contains violations of guidelines tagged as
clean:added. The list of clean guidelines are maintained in
automation/eclair_analysis/ECLAIR/tagging.ecl.
Signed-off-by: Simone Ballarin <simone.ballarin@bugseng.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
This patch defines an ARM64 and a X86_64 build for the
ECLAIR pipelines.
These files are used by the analyze.sh script in
automation/eclair_analysis: it initially calls prepare.sh,
then runs into an ECLAIR environment build.sh.
Only the toolchain invocations triggered by build.sh
are analyzed; the prepare.sh script is instead intended
to perform all the required operations for building xen
that are not supposed to be analyzed: e.g. dependencies
build.
Signed-off-by: Simone Ballarin <simone.ballarin@bugseng.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
The files with extension ecl are ECLAIR configurations that
are loaded during the analysis phase or during the report
generation phase: analysis.ecl is the main file for the analysis
phase, while reports.ecl is the one for the report phase.
All other ecl files are included by one of the two main ones.
The actions* scripts implement the integration with the CI server,
they are completely general and can be amended to work with any CI
server. Their presence in xen.git is recommended so that maintainance
would be easier.
analyze.sh is the script that actually triggers the analysis.
Signed-off-by: Simone Ballarin <simone.ballarin@bugseng.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Change parameter name from 'flag' to 'taint' for consistency with
the corresponding declaration.
This addresses a violation of MISRA C:2012 Rule 8.3: "All declarations
of an object or function shall use the same names and type qualifiers".
No functional changes.
Signed-off-by: Federico Serafini <federico.serafini@bugseng.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Give a name to unnamed parameters thus addressing violations of
MISRA C:2012 Rule 8.2 ("Function types shall be in prototype form with
named parameters").
Keep consistency between parameter names and types used in function
declarations and the ones used in the corresponding function
definitions, thus addressing violations of MISRA C:2012 Rule 8.3
("All declarations of an object or function shall use the same names
and type qualifiers").
No functional changes.
Signed-off-by: Federico Serafini <federico.serafini@bugseng.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Make function declaration and definition consistent using the same
parameter name ('mcs' do denote a pointer to an 'mc_state').
This addresses a violation of MISRA C:2012 Rule 8.3: "All declarations
of an object or function shall use the same names and type qualifiers".
Signed-off-by: Federico Serafini <federico.serafini@bugseng.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
With hvm_copy_to_guest_*() able to use const sources, update construct_dom0()
and friends to pass a const cmdline pointer. Nothing in these paths have a
reason to be modifying the command line passed in.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
This hunk was accidentally missing from a previous change.
Fixes: d642c07066 ("xen/x86: Use const char * for string literals")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Roger Pau Monné
Federico Serafini
Peter Hoyes
Anthony PERARD
Andrew Cooper
Nicola Vetrini
Olaf Hering
Oleksandr Tyshchenko
Julien Grall
Bertrand Marquis
Juergen Gross
Shawn Anastasio
Simone Ballarin