In the display protocol connector's id is named as unique-id. This patch renames
it in the libxl/xl code and uses XENDISPL_FIELD... definitions from the protocol
header.
Signed-off-by: Oleksandr Grytsov <oleksandr_grytsov@epam.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
The exact value of cpu_khz can only be obtained via 'xl dmesg', and
therefore can be lost after some time. 'xl info' truncates the value to
full MHz. Adjust the output to show the full khz value.
This helps the host admin to track how a host has calibrated itself. The
value of cpu_khz is used during live migration for the decision if
access to TSC should be emualted.
Commit eb5277a30e ("bitkeeper revision 1.959.1.4
(40d04a87acOb29u-5Y5OxMhHvP2x9g)" gives no hint why cpu_mhz instead of
cpu_khz was chosen.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
Add pvcalls support to libxl and xl. Create the appropriate pvcalls
entries in xenstore.
Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Make it possible to get and set a (Credit1) scheduler's
vCPU migration delay via the SCHEDOP sysctl, from both
libxl and xl (no change needed in libxc).
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
XSA-256 forces the local APIC to always be enabled for PVH guests, so
ignore any apic option for PVH guests. Update the documentation
accordingly.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
We generally support old config formats indefinintely (see the disk
format) without emitting warnings.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
This patch implements new generic set value interfaces in libxc and libxl.
These interfaces are suitable for all allocation features. It also adds a
new MBA set value command in xl.
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
This patch implements generic get value interfaces in libxc and libxl.
It also refactors the get value flow in xl to make it be suitable for all
allocation features. Based on that, a new MBA get value command is added in xl.
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
This patch implements a new xl get HW info interface. A new argument
is added for psr-hwinfo command to get and show MBA HW info.
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
This breaks ARM. It should be protected by some x86 #if. For now,
revert it, as it's not critical (and it isn't included in the
comet/vixen security patch branches published via XSA-254).
This reverts commit 63080b7043.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
CC: Julien Grall <julien.grall@linaro.org>
If the config file specifies a type (or builder), it overrides this
default. But if it doesn't, you now get a PV-in-PVH guest.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Right now, this is broken because libxl__build_device_model_args_new
is used also for the qemu run for pv guests for qdisk devices, pvfb,
etc.
We can either make this option properly HVM-specific, or make it
generic.
In principle it is a reasonable request, to make the PV qemu
deprivileged (even though it is not likely to be implemented any time
soon). So make this option generic.
We retain the name "device model" even though it is arguably
inaccurate, because the xl docs already say, for example
For a PV guest a device-model is sometimes used to provide backends
for certain PV devices
The documentation patch here is pure code motion. For ease of review
we will fix up the docs, so the wording to be right for the new
context, in the next patch.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Reported-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
---
v2: Change xl too, to avoid breaking the build.
Fix manpage pod syntax.
This functionality is still quite imperfect, but it will be useful in
certain restricted use cases.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
This is in line with the previous behavior, setting the number of
maptrack frames to 0 will prevent driver domains from working
correctly.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
An option is provided in libxl to enable/disable SBSA vuart while
creating a guest domain.
Libxl now supports a generic vuart console and SBSA uart is a specific type.
In future support can be added for multiple vuart of different types.
User can enable SBSA vuart by adding the following line in the guest
configuration file:
vuart = "sbsa_uart"
Signed-off-by: Bhupinder Thakur <bhupinder.thakur@linaro.org>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
The new firmware option aims to provide a coherent way to set the
firmware for the different kind of guests Xen supports.
For PV guests the available firmwares are pvgrub{32|64}, and for HVM
the following are supported: bios, uefi, seabios, rombios and ovmf.
Note that uefi maps to ovmf, and bios maps to the default firmware for
each device model.
The xl.cfg man page is updated to document the new feature.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Introduce a new type option to xl configuration files in order to
specify the domain type. This supersedes the current builder option.
The new option is documented in the xl.cfg man page, and the previous
builder option is marked as deprecated.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
This is required because those options will be used by the new PVH
guest type, and thus need to be shared between PV and HVM.
Defines are added in order to signal consumers that the fields are
available.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Code movement in preparation for making the bootloader,
bootloader_args, nested_hvm and timer_mode fields shared between all
guests types. While moving the code, limit the line-length to 80
columns.
No functional change.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Add new domain config items for setting the limits for the maximum
numbers of grant table frames and maptrack frames of a domain.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Add xl.conf config items for default values of grant limits:
max_grant_frames will set the default for the maximum number of grant
frames for a domain which will take effect if the domain's config file
doesn't specify a value. If max_grant_frames isn't set in xl.conf it
will default to 32 for hosts with all memory below 16TB and to 64 for
hosts with memory above 16TB.
max_maptrack_frames will set the default for the maximum number of
maptrack frames for a domain. If max_maptrack_frames isn't set in
xl.conf it will default to 0, as normally only backend domains need
maptrack frames.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
DEPS_INCLUDE is currently the same as DEPS, so no functional change.
This patch is the result of this perl rune:
git-grep -l 'include.*DEPS' | xargs perl -i -pe 'next unless m/^-?include/; s/\bDEPS\b/DEPS_INCLUDE/'
I have verified that I haven't missed anything, with this rune:
git-grep '\bDEPS\b'
Reported-by: Jan Beulich <JBeulich@suse.com>
CC: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
DEPS_RM is currently the same as DEPS, so no functional change.
This patch is the result of two perl runes:
git-grep -l 'rm.*DEPS' | xargs perl -i~ -pe 'next unless m/^\t+rm\b/; s/\bDEPS\b/DEPS_RM/;'
git-grep -l 'RM.*DEPS' | xargs perl -i~ -pe 'next unless m/^\t+\$\(RM\)/; s/\bDEPS\b/DEPS_RM/;'
And editing tools/xenstat/libxenstat/Makefile by hand.
I verified that I didn't miss anything with this rune:
git-grep '\bDEPS\b' | grep -v include |less
Reported-by: Jan Beulich <JBeulich@suse.com>
CC: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Due to historical reason, type of parameter '*nr' in 'libxl_psr_cat_get_info'
is 'int'. But this is not right. It should be 'unsigned int'. This patch fixes
this and does related changes.
Suggested-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
The libxl interfaces and related functions are not necessary to be included by
'LIBXL_HAVE_PSR_CMT' and 'LIBXL_HAVE_PSR_CAT'. So replace them to common x86
macros. Furthermore, only compile 'xl_psr.c' under x86.
Suggested-by: Roger Pau Monné <roger.pau@citrix.com>
Suggested-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
To match our naming convention. Since we released p9 one release ago,
we need to define a macro inside libxl.h to indicate the change.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Add a new xl command "set-parameters" to set hypervisor parameters at
runtime similar to boot time parameters via command line.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
The manual of xl says --clear option is supported and that option
worked for xm. Add that to xl now.
Signed-off-by: Xiao Liang <xiliang@redhat.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
This patch implements the xl/xc changes to support set CBM
for L2 CAT.
The new level option is introduced to original CAT setting
command in order to set CBM for specified level CAT.
- 'xl psr-cat-set' is updated to set cache capacity bitmasks(CBM)
for a domain according to input cache level.
root@:~$ xl psr-cat-set -l2 1 0x7f
root@:~$ xl psr-cat-show -l2 1
Socket ID : 0
Default CBM : 0xff
ID NAME CBM
1 ubuntu14 0x7f
Signed-off-by: He Chen <he.chen@linux.intel.com>
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
This patch implements changes in xl/xc changes to support
showing CBM of L2 CAT.
The new level option is introduced to original CAT showing
command in order to show CBM for specified level CAT.
- 'xl psr-cat-show' is updated to show CBM of a domain
according to input cache level.
Examples:
root@:~$ xl psr-cat-show -l2 1
Socket ID : 0
Default CBM : 0xff
ID NAME CBM
1 ubuntu14 0x7f
Signed-off-by: He Chen <he.chen@linux.intel.com>
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
This patch implements xl/xc changes to support get HW info
for L2 CAT.
'xl psr-hwinfo' is updated to show both L3 CAT and L2 CAT
info.
Example(on machine which only supports L2 CAT):
Cache Monitoring Technology (CMT):
Enabled : 0
Cache Allocation Technology (CAT): L2
Socket ID : 0
Maximum COS : 3
CBM length : 8
Default CBM : 0xff
Signed-off-by: He Chen <he.chen@linux.intel.com>
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Running "make uninstall" does not remove all installed files, a
situation which might cause link related issues if xen is re-installed
in a different location.
In order to make uninstall correctly remove the files it is best
the process should be done recursively by mirroring each "install"
target with an "uninstall" who removes the installed files.
An exception to this rule is uninstalling the files produced by
"qemu-xen-dir-remote" and "qemu-xen-traditional-dir", which are external
to the project. These projects do not implement an "uninstall" target so
the files have to be removed manually.
Signed-off-by: Petre Pircalabu <ppircalabu@bitdefender.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
If LMCE is supported by host and ' mca_caps = [ "lmce" ] ' is present
in xl config, the LMCE capability will be exposed in guest MSR_IA32_MCG_CAP.
By default, LMCE is not exposed to guest so as to keep the backwards migration
compatibility.
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com> for hypervisor side
Acked-by: Wei Liu <wei.liu2@citrix.com>
Currently setting altp2mhvm=1 in the domain configuration allows access to the
altp2m interface for both in-guest and external privileged tools. This poses
a problem for use-cases where only external access should be allowed, requiring
the user to compile Xen with XSM enabled to be able to appropriately restrict
access.
In this patch we deprecate the altp2mhvm domain configuration option and
introduce the altp2m option, which allows specifying if by default the altp2m
interface should be external-only or limited. The information is stored in
HVM_PARAM_ALTP2M which we now define with specific XEN_ALTP2M_* modes.
If external mode is selected, the XSM check is shifted to use XSM_DM_PRIV
type check, thus restricting access to the interface by the guest itself. Note
that we keep the default XSM policy untouched. Users of XSM who wish to enforce
external mode for altp2m can do so by adjusting their XSM policy directly,
as this domain config option does not override an active XSM policy.
Also, as part of this patch we adjust the hvmop handler to require
HVM_PARAM_ALTP2M to be of a type other then disabled for all ops. This has been
previously only required for get/set altp2m domain state, all other options
were gated on altp2m_enabled. Since altp2m_enabled only gets set during set
altp2m domain state, this change introduces no new requirements to the other
ops but makes it more clear that it is required for all ops.
Signed-off-by: Tamas K Lengyel <tamas.lengyel@zentific.com>
Signed-off-by: Sergej Proskurin <proskurin@sec.in.tum.de>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Acked-by: Jan Beulich <jbeulich@suse.com>
The hypervisor code (tmemc_shared_pool_auth) since the inception
would consider auth values of:
0 - to disable authentication!
1 - to enable authentication for the given UUID.
The docs have it the other way around, so lets fix it.
Acked-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Add functions to libxl to setup a Xen 9pfs frontend/backend connection.
Add support to xl to parse a 9pfs option in the VM config file, in the
following format:
p9=["tag=share_dir,security_model=none,path=/root/share_dir"]
where tag identifies the 9pfs share and it is required to mount it on
the guest side, path is the path of the filesystem to share and the only
security_model supported is "none" which means that files are stored
using the same credentials as they are created on the guest (no user
ownership squash or remap).
Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Oleksandr Grytsov