A person tagged in commit ebaaa72ee0
claims the tag is in accurate; revert this commit so that we can
re-commit it again with the tag corrected.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
A person tagged in commit a2eeaa6906
claims the tag is in accurate; revert this commit so that we can
re-commit it again with the tag corrected.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
A person tagged in commit 646589ac14
claims the tag is in accurate; revert this commit so that we can
re-commit it again with the tag corrected.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
While mail hasn't been bouncing, Daniel De Graaf has not been
responding to patch submissions or otherwise interacting with the
community for several years. Daniel Smith has at least been working
with the code, and is a regular member of our community; and he has
agreed to step up into the role.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
ARM has proposed Henry Wang as a release manager for 4.17. Signify
this by giving him maintainership over CHANGELOG.md.
Below is an introduction given by Bertrand Marquis:
Henry Wang is an open-source software engineer at Arm focusing on the
hypervisor and virtualization technology. Before joining the
AIS-Hypervisor team, he was one of the leading Arm contributors of the
Rust-VMM and the Cloud Hypervisor community. He is the Arm reviewer
of the Cloud Hypervisor project. His work includes basic project
enabling on Arm platform, Arm device emulation, advanced features
support on Arm and bug fixes.
After joining the AIS-Hypervisor team at Arm, he has been involved in Xen feature
development on Arm in various areas, including:
1. Xen Arm MPAM extension research and PoC: Ongoing, the design will
share in xen-devel soon.
2. Port of Xen to Arm MPU systems: Working together with Penny Zheng
on coding and testing, will be soon sent to xen-devel.
3. Static Xen heap on Arm: Work done but depend on the direct mapping
series from Penny Zheng, will be upstreamed in the next weeks.
4. Virtio PoC for Xen on Arm using kvmtool as the Xen virtio backend:
Work done, including the enabling of the virtio and the virtio
performance tuning.
5. Participated in code reviews and discussions in xen-devel,
including the foreign memory mapping series from EPAM, etc.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Henry Wang <Henry.Wang@arm.com>
Acked-by: Julien Grall <jgrall@amazon.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
The support status of 32-bit guests doesn't seem particularly useful.
With it changed to fully unsupported outside of PV-shim, adjust the PV32
Kconfig default accordingly.
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
This reverts commit 60db5da62a.
This is in preparation for the planned move to hosting the xenlight
package in a separate repo.
This also fixes a regression when building with a read-only source and
an out-of-tree build.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Nick Rosbrook <rosbrookn@ainfosec.com>
Specifically, Fedora 29, Archlinux, and Debian unstable. This will
cause the CI loop to detect golang build failures.
CentOS 6 and 7 don't have golang packages, and the packages in
stretch, jessie, xenial, and trusty are too old.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Wei Liu <wl@xen.org>
This fixes the following build error in hvmloader:
usr/include/gnu/stubs.h:7:11: fatal error: gnu/stubs-32.h: No such file or directory
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Wei Liu <wl@xen.org>
The original build setup used a "fake GOPATH" in tools/golang to test
the mechanism of building from go package files installed on a
filesystem. With the move to modules, this isn't necessary, and leads
to potentially confusing directories being created. (I.e., it might
not be obvious that files under tools/golang/src shouldn't be edited.)
Get rid of the code that creates this (now unused) intermediate
directory. Add direct dependencies from 'build' onto the source
files.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Reviewed-by: Nick Rosbrook <rosbrookn@ainfosec.com>
The generated golang bindings (types.gen.go and helpers.gen.go) are
left checked in so that they can be fetched from xenbits using the
golang tooling. This means that they must be updated whenever
libxl_types.idl (or other dependencies) are updated. However, the
golang bindings are only built optionally; we can't assume that anyone
updating libxl_types.idl will also descend into the tools/golang tree
to re-generate the bindings.
Fix this by re-generating the golang bindings from the libxl Makefile
when the IDL dependencies are updated, so that anyone who updates
libxl_types.idl will also end up updating the golang generated files
as well.
- Make a variable for the generated files, and a target in
xenlight/Makefile which will only re-generate the files.
- Add a target in libxl/Makefile to call external idl generation
targets (currently only golang).
For ease of testing, also add a specific target in libxl/Makefile just
to check and update files generated from the IDL.
This does mean that there are two potential paths for generating the
files during a parallel build; but that shouldn't be an issue, since
tools/golang/xenlight should never be built until after tools/libxl
has completed building anyway.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Reviewed-by: Nick Rosbrook <rosbrookn@ainfosec.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
`go build` wants to add the current go version to go.mod as the
minimum every time we run `make` in the directory. Add 1.11 (the
earliest Go version that supports modules) there to make it happy.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Reviewed-by: Nick Rosbrook <rosbrookn@ainfosec.com>
c/s 7efd9f3d45 ("libxl: Handle Linux stubdomain specific QEMU
options.") modified libl_types.idl. Run gengotypes.py again to update
the geneated golang bindings.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Wei Liu <wl@xen.org>
This implements the wrapper around libxl_domain_create_new(). With
the previous changes, it's now possible to create a domain using the
golang bindings (although not yet to unpause it or harvest it after it
shuts down).
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Reviewed-by: Nick Rosbrook <rosbrookn@ainfosec.com>
libxl forks external processes and waits for them to complete; it
therefore needs to be notified when children exit.
In absence of instructions to the contrary, libxl sets up its own
SIGCHLD handlers.
Golang always unmasks and handles SIGCHLD itself. libxl thankfully
notices this and throws an assert() rather than clobbering SIGCHLD
handlers.
Tell libxl that we'll be responsible for getting SIGCHLD notifications
to it. Arrange for a channel in the context to receive notifications
on SIGCHLD, and set up a goroutine that will pass these on to libxl.
NB that every libxl context needs a notification; so multiple contexts
will each spin up their own goroutine when opening a context, and shut
it down on close.
libxl also wants to hold on to a const pointer to
xenlight_childproc_hooks rather than do a copy; so make a global
structure in C space. Make it `static const`, just for extra safety;
this requires making a function in the C space to pass it to libxl.
While here, add a few comments to make the context set-up a bit easier
to follow.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Reviewed-by: Nick Rosbrook <rosbrookn@ainfosec.com>
The current fromC array code will do the "magic" casting and
martialling even when num_foo variable is 0. Go crashes when doing
the cast.
Only do array marshalling if the number of elements is non-zero;
otherwise, leave the target pointer empty (nil for Go slices, NULL for
C arrays).
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Reviewed-by: Nick Rosbrook <rosbrookn@ainfosec.com>
Keyed types in libxl_types.idl can have elements of type 'None'. The
golang type generator (correctly) don't implement any union types for
these empty elements. However, the toC and fromC helper generators
incorrectly treat these elements as invalid.
Consider for example, libxl_channelinfo. The idl contains the
following keyed element:
("u", KeyedUnion(None, libxl_channel_connection, "connection",
[("unknown", None),
("pty", Struct(None, [("path", string),])),
("socket", None),
])),
But the toC marshaller currently looks like this:
switch x.Connection {
case ChannelConnectionPty:
tmp, ok := x.ConnectionUnion.(ChannelinfoConnectionUnionPty)
if !ok {
return errors.New("wrong type for union key connection")
}
var pty C.libxl_channelinfo_connection_union_pty
if tmp.Path != "" {
pty.path = C.CString(tmp.Path)
}
ptyBytes := C.GoBytes(unsafe.Pointer(&pty), C.sizeof_libxl_channelinfo_connection_union_pty)
copy(xc.u[:], ptyBytes)
default:
return fmt.Errorf("invalid union key '%v'", x.Connection)
}
Which means toC() will fail for ChannelConnectionUnknown or
ChannelConnectionSocket.
Modify the generator to handle keyed union elements of type 'None'.
For fromC, set the value to 'nil'; for toC, leave things as-is.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Reviewed-by: Nick Rosbrook <rosbrookn@ainfosec.com>
With having to take over Lars' role as community manager, I don't have
the necessary time to review the mm/ subsystem. Step back to being only
a designated reviewer, reverting mantainership to the x86 maintianers.
While here, fix my e-mail address in other places.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wl@xen.org>
The "nesting" section in the MAINTAINERS file was not initially
intended to describe the check-in policy for patches, but only how
nesting worked; but since there was no check-in policy, it has been
acting as a de-facto policy.
One problem with this is that the policy is not complete: It doesn't
cover open objections, time to check-in, or so on. The other problem
with the policy is that, as written, it doesn't account for
maintainers submitting patches to files which they themselves
maintain. This is fine for situations where there are are multiple
maintainers, but not for situations where there is only one
maintainer.
Add an explicit "Check-in policy" section to the MAINTAINERS document
to serve as the canonical reference for the check-in policy. Move
paragraphs not explicitly related to nesting into it.
While here, "promote" the "The meaning of nesting" section title.
DISCUSSION
This seems to be a change from people's understanding of the current
policy. Most people's understanding of the current policy seems to be:
1. In order to get a change to a given file committed, it must have
an Ack or Review from at least one *maintainer* of that file other
than the submitter.
2. In the case where a file has only one maintainer, it must have an
Ack or Review from a "nested" maintainer.
I.e., if I submitted something to x86/mm, it would require an Ack from
Jan or Andy, or (in exceptional circumstances) The Rest; but an Ack from
(say) Roger or Juergen wouldn't suffice.
Let's call this the "maintainer-ack" approach (because it must have an
ack or r-b from a maintainer to be checked in), and the proposal in
this patch the "maintainer-approval" (since SoB from a maintainer
indicates approval).
The core issue I have with "maintainer-ack" is that it makes the
maintainer less privileged with regard to writing code than
non-maintainers. If component X has maintainers A and B, then a
non-maintainer can have code checked in if reviewed either by A or B.
If A or B wants code checked in, they have to wait for exactly one
person to review it.
In fact, if B is quite busy, the easiest way for A really to get their
code checked in might be to hand it to a non-maintainer N, and ask N
to submit it as their own. Then A can Ack the patches and check them
in.
The current system, therefore, either sets up a perverse incentive (if
you think the behavior described above is unacceptable) or unnecessary
bureaucracy (if you think it's acceptable). Either way I think we
should set up our system to avoid it.
Other variations on "maintainer-ack" have been proposed:
- Allow maintainer's patches to go in with an R-b from "designated
reviewers"
- Allow maintainer's patches to go in with an Ack from more general
maintainer
Both fundamentally make it harder for maintainers to get their code in
and/or reviewed effectively than non-maintainers, setting up the
perverse incentive / unnecessary bureaucracy.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
If libxl_ctx_alloc() returns an error, we need to destroy the logger
that we made.
Restructure the Close() method such that it checks for each resource
to be freed and then frees it. This allows Close() to be come
idempotent, as well as to be a useful clean-up to a partially-created
context.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Reviewed-by: Nick Rosbrook <rosbrookn@ainfosec.com>
Commit 871e51d2d4 changed the sign on the xenlight error types (making
the values negative, same as the C-generated constants), but failed to
flip the sign in the Error() string function. The result is that
ErrorNonspecific.String() prints "libxl error: 1" rather than the
human-readable error message.
Get rid of the whole issue by making libxlErrors a map, and mapping
actual error values to string, falling back to printing the actual
value of the Error type if it's not present.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Reviewed-by: Nick Rosbrook <rosbrookn@ainfosec.com>
If an error is encountered deep in a complicated data structure, it's
often difficult to tell where the error actually is. Make the error
message from the generated toC() and fromC() structures more
informative by tagging which field being converted encountered the
error. This will have the effect of giving a "stack trace" of the
failure inside a nested data structure.
NB that my version of python insists on reordering a couple of switch
statements for some reason; In other patches I've reverted those
changes, but in this case it's more difficult because they interact
with actual code changes. I'll leave this here for now, as we're
going to remove helpers.gen.go from being tracked by git at some point
in the near future anyway.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Reviewed-by: Nick Rosbrook <rosbrookn@ainfosec.com>
Empty Go strings should be converted to `nil` libxl_cpuid_policy_list;
otherwise libxl_cpuid_parse_config gets confused.
Also, libxl_cpuid_policy_list returns a weird error, not a "normal"
libxl error; if it returns one of these non-standard errors, convert
it to ErrorInval.
Finally, make the fromC() method take a pointer, and set the value of
CpuidPolicyList such that it will generate a valid CpuidPolicyList in
response.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Reviewed-by: Nick Rosbrook <rosbrookn@ainfosec.com>
It's not always clear what the best way is to handle unexpected
conditions: whether with ASSERT(), domain_crash(), BUG_ON(), or some
other method. All methods have a risk of introducing security
vulnerabilities and unnecessary instabilities to production systems.
Provide guidelines for different options and when to use them.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Julien Grall <julien@xen.org>
The functions alloc_page_type(), alloc_lN_table(), free_page_type()
and free_lN_table() are confusingly named: nothing is being allocated
or freed. Rather, the page being passed in is being either validated
or devalidated for use as the specific type; in the specific case of
pagetables, these may be promoted or demoted (i.e., grab appropriate
references for PTEs).
Rename alloc_page_type() and free_page_type() to validate_page() and
devalidate_page(). Also rename alloc_segdesc_page() to
validate_segdesc_page(), since this is what it's doing.
Rename alloc_lN_table() and free_lN_table() to promote_lN_table() and
demote_lN_table(), respectively.
After this change:
- get / put type consistenly refer to increasing or decreasing the count
- validate / devalidate consistently refers to actions done when a
type count goes 0 -> 1 or 1 -> 0
- promote / demote consistenly refers to acquiring or freeing
resources (in the form of type refs and general references) in order
to allow a page to be used as a pagetable.
No functional change.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Replace `unsigned long` with `mfn_t` as appropriate throughout
alloc/free_lN_table, get/put_page_from_lNe, and
get_lN_linear_pagetable. This obviates the need for a load of
`mfn_x()` and `_mfn()` casts.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
In many places, a PTE being modified is accompanied by the pagetable
mfn which contains the PTE (primarily in order to be able to maintain
linear mapping counts). In many cases, this mfn is stored in the
non-descript variable (or argement) "pfn".
Replace these names with lNmfn, to indicate that 1) this is a
pagetable mfn, and 2) that it is the same level as the PTE in
question. This should be enough to remind readers that it's the mfn
containing the PTE.
No functional change.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Both put_page_from_l2e and put_page_from_l3e handle having superpage
entries by looping over each page and "put"-ing each one individually.
As with putting page table entries, this code is functionally
identical, but for some reason different. Moreover, there is already
a common function, put_data_page(), to handle automatically swapping
between put_page() (for read-only pages) or put_page_and_type() (for
read-write pages).
Replace this with put_data_pages() (plural), which does the entire
loop, as well as the put_page / put_page_and_type switch.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
put_page_from_l[234]e have identical functionality for devalidating an
entry pointing to a pagetable. But mystifyingly, they duplicate the
code in slightly different arrangements that make it hard to tell that
it's the same.
Create a new function, put_pt_page(), which handles the common
functionality; and refactor all the functions to be symmetric,
differing only in the level of pagetable expected (and in whether they
handle superpages).
Other than put_page_from_l2e() gaining an ASSERT it probably should
have had already, no functional changes.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
The PGT_partial bit in page->type_info holds both a type count and a
general ref count. During domain tear-down, when free_page_type()
returns -ERESTART, relinquish_memory() correctly handles the general
ref count, but fails to grab an extra type count when setting
PGT_partial. When this bit is eventually cleared, type_count underflows
and triggers the following BUG in page_alloc.c:free_domheap_pages():
BUG_ON((pg[i].u.inuse.type_info & PGT_count_mask) != 0);
As far as we can tell, this page underflow cannot be exploited any any
other way: The page can't be used as a pagetable by the dying domain
because it's dying; it can't be used as a pagetable by any other
domain since it belongs to the dying domain; and ownership can't
transfer to any other domain without hitting the BUG_ON() in
free_domheap_pages().
(steal_page() won't work on a page in this state, since it requires
PGC_allocated to be set, and PGC_allocated will already have been
cleared.)
Fix this by grabbing an extra type ref if setting PGT_partial in
relinquish_memory.
This is part of XSA-310.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
When validating or de-validating pages (in alloc_lN_table and
free_lN_table respectively), the `partial_flags` local variable is
used to keep track of whether the "current" PTE started the entire
operation in a "may be partial" state.
One of the patches in XSA-299 addressed the fact that it is possible
for a previously-partially-validated entry to subsequently be found to
have invalid entries (indicated by returning -EINVAL); in which case
page->partial_flags needs to be set to indicate that the current PTE
may have the partial bit set (and thus _put_page_type() should be
called with PTF_partial_set).
Unfortunately, the patches in XSA-299 assumed that once
put_page_from_lNe() returned -ERESTART on a page, it was not possible
for it to return -EINTR. This turns out to be true for
alloc_lN_table() and free_lN_table, but not for _get_page_type() and
_put_page_type(): both can return -EINTR when called on pages with
PGT_partial set. In these cases, the pages PGT_partial will still be
set; failing to set partial_flags appropriately may allow an attacker
to do a privilege escalation similar to those described in XSA-299.
Fix this by always copying the local partial_flags variable into
page->partial_flags when exiting early.
NB that on the "get" side, no adjustment to nr_validated_entries is
needed: whether pte[i] is partially validated or entirely
un-validated, we want nr_validated_entries = i. On the "put" side,
however, we need to adjust nr_validated_entries appropriately: if
pte[i] is entirely validated, we want nr_validated_entries = i + 1; if
pte[i] is partially validated, we want nr_validated_entries = i.
This is part of XSA-310.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Changeset 6c4efc1eba ("x86/mm: Don't drop a type ref unless you held a
ref to begin with"), part of XSA-299, changed the calling discipline
of put_page_type() such that if put_page_type() returned -ERESTART
(indicating a partially de-validated page), subsequent calls to
put_page_type() must be called with PTF_partial_set. If called on a
partially de-validated page but without PTF_partial_set, Xen will
BUG(), because to do otherwise would risk opening up the kind of
privilege escalation bug described in XSA-299.
One place this was missed was in vcpu_destroy_pagetables().
put_page_and_type_preemptible() is called, but on -ERESTART, the
entire operation is simply restarted, causing put_page_type() to be
called on a partially de-validated page without PTF_partial_set. The
result was that if such an operation were interrupted, Xen would hit a
BUG().
Fix this by having vcpu_destroy_pagetables() consistently pass off
interrupted de-validations to put_old_page_type():
- Unconditionally clear references to the page, even if
put_page_and_type failed
- Set old_guest_table and old_guest_table_partial appropriately
While here, do some refactoring:
- Move clearing of arch.cr3 to the top of the function
- Now that clearing is unconditional, move the unmap to the same
conditional as the l4tab mapping. This also allows us to reduce
the scope of the l4tab variable.
- Avoid code duplication by looping to drop references on
guest_table_user
This is part of XSA-310.
Reported-by: Sarah Newman <srn@prgmr.com>
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
"Linear pagetables" is a technique which involves either pointing a
pagetable at itself, or to another pagetable the same or higher level.
Xen has limited support for linear pagetables: A page may either point
to itself, or point to another page of the same level (i.e., L2 to L2,
L3 to L3, and so on).
XSA-240 introduced an additional restriction that limited the "depth"
of such chains by allowing pages to either *point to* other pages of
the same level, or *be pointed to* by other pages of the same level,
but not both. To implement this, we keep track of the number of
outstanding times a page points to or is pointed to another page
table, to prevent both from happening at the same time.
Unfortunately, the original commit introducing this reset this count
when resuming validation of a partially-validated pagetable, dropping
some "linear_pt_entry" counts.
On debug builds on systems where guests used this feature, this might
lead to crashes that look like this:
Assertion 'oc > 0' failed at mm.c:874
Worse, if an attacker could engineer such a situation to occur, they
might be able to make loops or other abitrary chains of linear
pagetables, leading to the denial-of-service situation outlined in
XSA-240.
This is XSA-309.
Reported-by: Manuel Bouyer <bouyer@antioche.eu.org>
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Xen used to have single, system-wide limits for the number of grant
frames and maptrack frames a guest was allowed to create. Increasing
or decreasing this single limit on the Xen command-line would change
the limit for all guests on the system.
Later, per-domain limits for these values was created. The system-wide
limits became strict limits: domains could not be created with higher
limits, but could be created with lower limits. However, that change
also introduced a range of different "default" values into various
places in the toolstack:
- The python libxc bindings hard-coded these values to 32 and 1024,
respectively
- The libxl default values are 32 and 1024 respectively.
- xl will use the libxl default for maptrack, but does its own default
calculation for grant frames: either 32 or 64, based on the max
possible mfn.
These defaults interact poorly with the hypervisor command-line limit:
- The hypervisor command-line limit cannot be used to raise the limit
for all guests anymore, as the default in the toolstack will
effectively override this.
- If you use the hypervisor command-line limit to *reduce* the limit,
then the "default" values generated by the toolstack are too high,
and all guest creations will fail.
In other words, the toolstack defaults require any change to be
effected by having the admin explicitly specify a new value in every
guest.
In order to address this, have grant_table_init treat negative values
for max_grant_frames and max_maptrack_frames as instructions to use the
system-wide default, and have all the above toolstacks default to passing
-1 unless a different value is explicitly configured.
This restores the old behavior in that changing the hypervisor command-line
option can change the behavior for all guests, while retaining the ability
to set per-guest values. It also removes the bug that reducing the
system-wide max will cause all domains without explicit limits to fail.
NOTE: - The Ocaml bindings require the caller to always specify a value,
and the code to start a xenstored stubdomain hard-codes these to 4
and 128 respectively; this behavour will not be modified.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wl@xen.org>
Acked-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Changesets 319f9a0ba9 ("passthrough: quarantine PCI devices") and
ba2ab00bbb ("IOMMU: default to always quarantining PCI devices")
introduced PCI device "quarantine" behavior, but did not document how
the pci-assignable-add and -remove functions act in regard to this.
Rectify this.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Wei Liu <wl@xen.org>
Reviewed-by: Paul Durrant <paul@xen.org>
Release-acked-by: Juergen Gross <jgross@suse.com>
Changeset ca2eee92df ("x86, hvm: Expose host core/HT topology to HVM
guests") attempted to "fake up" a topology which would induce guest
operating systems to not treat vcpus as sibling hyperthreads. This
involved actually reporting hyperthreading as available, but giving
vcpus every other ApicId; which in turn led to doubling the ApicIds
per core by bumping the ApicIdCoreSize by one. In particular, Ryzen
3xxx series processors, and reportedly EPYC "Rome" cpus -- have an
ApicIdCoreSize of 7; the "fake" topology increases this to 8.
Unfortunately, Windows running on modern AMD hardware -- including
Ryzen 3xxx series processors, and reportedly EPYC "Rome" cpus --
doesn't seem to cope with this value being higher than 7. (Linux
guests have so far continued to cope.)
A "proper" fix is complicated and it's too late to fix it either for
4.13, or to backport to supported branches. As a short-term fix,
limit this value to 7.
This does mean that a Linux guest, booted on such a system without
this change, and then migrating to a system with this change, with
more than 64 vcpus, would see an apparent topology change. This is a
low enough risk in practice that enabling this limit unilaterally, to
allow other guests to boot without manual intervention, is worth it.
Reported-by: Steven Haigh <netwiz@crc.id.au>
Reported-by: Andreas Kinzler <hfp@posteo.de>
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
"Linear pagetables" is a technique which involves either pointing a
pagetable at itself, or to another pagetable the same or higher level.
Xen has limited support for linear pagetables: A page may either point
to itself, or point to another page of the same level (i.e., L2 to L2,
L3 to L3, and so on).
XSA-240 introduced an additional restriction that limited the "depth"
of such chains by allowing pages to either *point to* other pages of
the same level, or *be pointed to* by other pages of the same level,
but not both. To implement this, we keep track of the number of
outstanding times a page points to or is pointed to another page
table, to prevent both from happening at the same time.
Additionally, XSA-299 introduced a mode whereby if a page was known to
have been only partially validated, _put_page_type() would be called
with PTF_partial_set, indicating that if the page had been
de-validated by someone else, the type count should be left alone.
Unfortunately, this change did not account for the required accounting
for linear page table uses and entries; in the case that a previously
partially-devalidated pagetable was fully-devalidated by someone else,
the linear_pt_counts are not updated.
This could happen in one of two places:
1. In the case a partially-devalidated page was re-validated by
someone else
2. During domain tear-down, when pages are force-invalidated while
leaving the type count intact.
The second could be ignored, since at that point the pages can no
longer be abused; but the first requires handling. Note however that
this would not be a security issue: having the counts be too high is
overly strict (i.e., will prevent a page from being used in a way
which is perfectly safe), but shouldn't cause any other issues.
Fix this by adjusting the linear counts when a page loses validation,
regardless of whether the de-validation completed or was only partial.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
Both are now potentially asynchronous; pass in 'nil' to retain
synchronous behavior.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
Validation and de-validation of pagetable trees may take arbitrarily
large amounts of time, and so must be preemptible. This is indicated
by setting the PGT_partial bit in the type_info, and setting
nr_validated_entries and partial_flags appropriately. Specifically,
if the entry at [nr_validated_entries] is partially validated,
partial_flags should have the PGT_partial_set bit set, and the entry
should hold a general reference count. During de-validation,
put_page_type() is called on partially validated entries.
Unfortunately, there are a number of issues with the current algorithm.
First, doing a "normal" put_page_type() is not safe when no type ref
is held: there is nothing to stop another vcpu from coming along and
picking up validation again: at which point the put_page_type may drop
the only page ref on an in-use page. Some examples are listed in the
appendix.
The core issue is that put_page_type() is being called both to clean
up PGT_partial, and to drop a type count; and has no way of knowing
which is which; and so if in between, PGT_partial is cleared,
put_page_type() will drop the type ref erroneously.
What is needed is to distinguish between two states:
- Dropping a type ref which is held
- Cleaning up a page which has been partially de/validated
Fix this by telling put_page_type() which of the two activities you
intend.
When cleaning up a partial de/validation, take no action unless you
find a page partially validated.
If put_page_type() is called without PTF_partial_set, and finds the
page in a PGT_partial state anyway, then there's certainly been a
misaccounting somewhere, and carrying on would almost certainly cause
a security issue, so crash the host instead.
In put_page_from_lNe, pass partial_flags on to _put_page_type().
old_guest_table may be set either with a fully validated page (when
using the "deferred put" pattern), or with a partially validated page
(when a normal "de-validation" is interrupted, or when a validation
fails part-way through due to invalid entries). Add a flag,
old_guest_table_partial, to indicate which of these it is, and use
that to pass the appropriate flag to _put_page_type().
While here, delete stray trailing whitespace.
This is part of XSA-299.
Reported-by: George Dunlap <george.dunlap@citrix.com>
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
-----
Appendix:
Suppose page A, when interpreted as an l3 pagetable, contains all
valid entries; and suppose A[x] points to page B, which when
interpreted as an l2 pagetable, contains all valid entries.
P1: PIN_L3_TABLE
A -> PGT_l3_table | 1 | valid
B -> PGT_l2_table | 1 | valid
P1: UNPIN_TABLE
> Arrange to interrupt after B has been de-validated
B:
type_info -> PGT_l2_table | 0
A:
type_info -> PGT_l3_table | 1 | partial
nr_validated_enties -> (less than x)
P2: mod_l4_entry to point to A
> Arrange for this to be interrupted while B is being validated
B:
type_info -> PGT_l2_table | 1 | partial
(nr_validated_entires &c set as appropriate)
A:
type_info -> PGT_l3_table | 1 | partial
nr_validated_entries -> x
partial_pte = 1
P3: mod_l3_entry some other unrelated l3 to point to B:
B:
type_info -> PGT_l2_table | 1
P1: Restart UNPIN_TABLE
At this point, since A.nr_validate_entries == x and A.partial_pte !=
0, free_l3_table() will call put_page_from_l3e() on pl3e[x], dropping
its type count to 0 while it's still being pointed to by some other l3
A similar issue arises with old_guest_table. Consider the following
scenario:
Suppose A is a page which, when interpreted as an l2, has valid entries
until entry x, which is invalid.
V1: PIN_L2_TABLE(A)
<Validate until we try to validate [x], get -EINVAL>
A -> PGT_l2_table | 1 | PGT_partial
V1 -> old_guest_table = A
<delayed>
V2: PIN_L2_TABLE(A)
<Pick up where V1 left off, try to re-validate [x], get -EINVAL>
A -> PGT_l2_table | 1 | PGT_partial
V2 -> old_guest_table = A
<restart>
put_old_guest_table()
_put_page_type(A)
A -> PGT_l2_table | 0
V1: <restart>
put_old_guest_table()
_put_page_type(A) # UNDERFLOW
Indeed, it is possible to engineer for old_guest_table for every vcpu
a guest has to point to the same page.
If an invalid entry is discovered when validating a page-table tree,
the entire tree which has so far been validated must be de-validated.
Since this may take a long time, alloc_l[2-4]_table() set current
vcpu's old_guest_table immediately; put_old_guest_table() will make
sure that put_page_type() will be called to finish off the
de-validation before any other MMU operations can happen on the vcpu.
The invariant for partial pages should be:
* Entries [0, nr_validated_ptes) should be completely validated;
put_page_type() will de-validate these.
* If [nr_validated_ptes] is partially validated, partial_flags should
set PTF_partiaL_set. put_page_type() will be called on this page to
finish off devalidation, and the appropriate refcount adjustments
will be done.
alloc_l[2-3]_table() indicates partial validation to its callers by
setting current->old_guest_table.
Unfortunately, this is mishandled.
Take the case where validating lNe[x] returns an error.
First, alloc_l3_table() doesn't check old_guest_table at all; as a
result, partial_flags is not set when it should be. nr_validated_ptes
is set to x; and since PFT_partial_set clear, de-validation resumes at
nr_validated_ptes-1. This means that the l2 page at pl3e[x] will not
have put_page_type() called on it when de-validating the rest of the
l3: it will be stuck in the PGT_partial state until the domain is
destroyed, or until it is re-used as an l2. (Any other page type will
fail.)
Worse, alloc_l4_table(), rather than setting PTF_partial_set as it
should, sets nr_validated_ptes to x+1. When de-validating, since
partial is 0, this will correctly resume calling put_page_type at [x];
but, if the put_page_type() is never called, but instead
get_page_type() is called, validation will pick up at [x+1],
neglecting to validate [x]. If the rest of the validation succeeds,
the l4 will be validated even though [x] is invalid.
Fix this in both cases by setting PTF_partial_set if old_guest_table
is set.
While here, add some safety catches:
- old_guest_table must point to the page contained in
[nr_validated_ptes].
- alloc_l1_page shouldn't set old_guest_table
If we experience one of these situations in production builds, it's
safer to avoid calling put_page_type for the pages in question. If
they have PGT_partial set, they will be cleaned up on domain
destruction; if not, we have no idea whether a type count is safe to
drop. Retaining an extra type ref that should have been dropped may
trigger a BUG() on the free_domain_page() path, but dropping a type
count that shouldn't be dropped may cause a privilege escalation.
This is part of XSA-299.
Reported-by: George Dunlap <george.dunlap@citrix.com>
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
In order to allow recursive pagetable promotions and demotions to be
interrupted, Xen must keep track of the state of the sub-pages
promoted or demoted. This is stored in two elements in the page
struct: nr_entries_validated and partial_flags.
The rule is that entries [0, nr_entries_validated) should always be
validated and hold a general reference count. If partial_flags is
zero, then [nr_entries_validated] is not validated and no reference
count is held. If PTF_partial_set is set, then [nr_entries_validated]
is partially validated, and a general reference count is held.
Unfortunately, in cases where an entry began with PTF_partial_set set,
and get_page_from_lNe() returns -EINVAL, the PTF_partial_set bit is
erroneously dropped. (This scenario can be engineered mainly by the
use of interleaving of promoting and demoting a page which has "linear
pagetable" entries; see the appendix for a sketch.) This means that
we will "leak" a general reference count on the page in question,
preventing the page from being freed.
Fix this by setting page->partial_flags to the partial_flags local
variable.
This is part of XSA-299.
Reported-by: George Dunlap <george.dunlap@citrix.com>
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
-----
Appendix
Suppose A and B can both be promoted to L2 pages, and A[x] points to B.
V1: PIN_L2 B.
B.type_count = 1 | PGT_validated
B.count = 2 | PGC_allocated
V1: MOD_L3_ENTRY pointing something to A.
In the process of validating A[x], grab an extra type / ref on B:
B.type_count = 2 | PGT_validated
B.count = 3 | PGC_allocated
A.type_count = 1 | PGT_validated
A.count = 2 | PGC_allocated
V1: UNPIN B.
B.type_count = 1 | PGT_validate
B.count = 2 | PGC_allocated
V1: MOD_L3_ENTRY removing the reference to A.
De-validate A, down to A[x], which points to B.
Drop the final type on B. Arrange to be interrupted.
B.type_count = 1 | PGT_partial
B.count = 2 | PGC_allocated
A.type_count = 1 | PGT_partial
A.nr_validated_entries = x
A.partial_pte = -1
V2: MOD_L3_ENTRY adds a reference to A.
At this point, get_page_from_l2e(A[x]) tries
get_page_and_type_from_mfn(), which fails because it's the wrong type;
and get_l2_linear_pagetable() also fails, because B isn't validated as
an l2 anymore.
In order to allow recursive pagetable promotions and demotions to be
interrupted, Xen must keep track of the state of the sub-pages
promoted or demoted. This is stored in two elements in the page struct:
nr_entries_validated and partial_flags.
The rule is that entries [0, nr_entries_validated) should always be
validated and hold a general reference count. If partial_flags is
zero, then [nr_entries_validated] is not validated and no reference
count is held. If PTF_partial_set is set, then [nr_entries_validated]
is partially validated.
At the moment, a distinction is made between promotion and demotion
with regard to whether the entry itself "holds" a general reference
count: when entry promotion is interrupted (i.e., returns -ERESTART),
the entry is not considered to hold a reference; when entry demotion
is interrupted, the entry is still considered to hold a general
reference.
PTF_partial_general_ref is used to distinguish between these cases.
If clear, it's a partial promotion => no general reference count held
by the entry; if set, it's partial demotion, so a general reference
count held. Because promotions and demotions can be interleaved, this
value is passed to get_page_and_type_from_mfn and put_page_from_l*e,
to be able to properly handle reference counts.
Unfortunately, because a refcount is not held, it is possible to
engineer a situation where PFT_partial_set is set but the page in
question has been assigned to another domain. A sketch is provided in
the appendix.
Fix this by having the parent page table entry hold a general
reference count whenever PFT_partial_set is set. (For clarity of
change, keep two separate flags. These will be collapsed in a
subsequent changeset.)
This has two basic implications. On the put_page_from_lNe() side,
this mean that the (partial_set && !partial_ref) case can never happen,
and no longer needs to be special-cased.
Secondly, because both flags are set together, there's no need to carry over
existing bits from partial_pte.
(NB there is still another issue with calling _put_page_type() on a
page which had PGT_partial set; that will be handled in a subsequent
patch.)
On the get_page_and_type_from_mfn() side, we need to distinguish
between callers which hold a reference on partial (i.e.,
alloc_lN_table()), and those which do not (new_cr3, PIN_LN_TABLE, and
so on): pass a flag if the type should be retained on interruption.
NB that since l1 promotion can't be preempted, that get_page_from_l2e
can't return -ERESTART.
This is part of XSA-299.
Reported-by: George Dunlap <george.dunlap@citrix.com>
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
-----
* Appendix: Engineering PTF_partial_set while a page belongs to a
foreign domain
Suppose A is a page which can be promoted to an l3, and B is a page
which can be promoted to an l2, and A[x] points to B. B has
PGC_allocated set but no other general references.
V1: PIN_L3 A.
A is validated, B is validated.
A.type_count = 1 | PGT_validated | PGT_pinned
B.type_count = 1 | PGT_validated
B.count = 2 | PGC_allocated (A[x] holds a general ref)
V1: UNPIN A.
A begins de-validation.
Arrange to be interrupted when i < x
V1->old_guest_table = A
V1->old_guest_table_ref_held = false
A.type_count = 1 | PGT_partial
A.nr_validated_entries = i < x
B.type_count = 0
B.count = 1 | PGC_allocated
V2: MOD_L4_ENTRY to point some l4e to A.
Picks up re-validation of A.
Arrange to be interrupted halfway through B's validation
B.type_count = 1 | PGT_partial
B.count = 2 | PGC_allocated (PGT_partial holds a general ref)
A.type_count = 1 | PGT_partial
A.nr_validated_entries = x
A.partial_pte = PTF_partial_set
V3: MOD_L3_ENTRY to point some other l3e (not in A) to B.
Validates B.
B.type_count = 1 | PGT_validated
B.count = 2 | PGC_allocated ("other l3e" holds a general ref)
V3: MOD_L3_ENTRY to clear l3e pointing to B.
Devalidates B.
B.type_count = 0
B.count = 1 | PGC_allocated
V3: decrease_reservation(B)
Clears PGC_allocated
B.count = 0 => B is freed
B gets assigned to a different domain
V1: Restarts UNPIN of A
put_old_guest_table(A)
...
free_l3_table(A)
Now since A.partial_flags has PTF_partial_set, free_l3_table() will
call put_page_from_l3e() on A[x], which points to B, while B is owned
by another domain.
If A[x] held a general refcount for B on partial validation, as it does
for partial de-validation, then B would still have a reference count of
1 after PGC_allocated was freed; so B wouldn't be freed until after
put_page_from_l3e() had happend on A[x].
In order to allow recursive pagetable promotions and demotions to be
interrupted, Xen must keep track of the state of the sub-pages
promoted or demoted. This is stored in two elements in the page
struct: nr_entries_validated and partial_flags.
The rule is that entries [0, nr_entries_validated) should always be
validated and hold a general reference count. If partial_flags is
zero, then [nr_entries_validated] is not validated and no reference
count is held. If PTF_partial_set is set, then [nr_entries_validated]
is partially validated.
At the moment, a distinction is made between promotion and demotion
with regard to whether the entry itself "holds" a general reference
count: when entry promotion is interrupted (i.e., returns -ERESTART),
the entry is not considered to hold a reference; when entry demotion
is interrupted, the entry is still considered to hold a general
reference.
PTF_partial_general_ref is used to distinguish between these cases.
If clear, it's a partial promotion => no general reference count held
by the entry; if set, it's partial demotion, so a general reference
count held. Because promotions and demotions can be interleaved, this
value is passed to get_page_and_type_from_mfn and put_page_from_l*e,
to be able to properly handle reference counts.
Unfortunately, when alloc_l[23]_table check hypercall_preempt_check()
and return -ERESTART, they set nr_entries_validated, but don't clear
partial_flags.
If we were picking up from a previously-interrupted promotion, that
means that PTF_partial_set would be set even though
[nr_entries_validated] was not partially validated. This means that
if the page in this state were de-validated, put_page_type() would
erroneously be called on that entry.
Perhaps worse, if we were racing with a de-validation, then we might
leave both PTF_partial_set and PTF_partial_general_ref; and when
de-validation picked up again, both the type and the general ref would
be erroneously dropped from [nr_entries_validated].
In a sense, the real issue here is code duplication. Rather than
duplicate the interruption code, set rc to -EINTR and fall through to
the code which already handles that case correctly.
Given the logic at this point, it should be impossible for
partial_flags to be non-zero; add an ASSERT() to catch any changes.
This is part of XSA-299.
Reported-by: George Dunlap <george.dunlap@citrix.com>
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Make it easier to read by declaring the conditions in which we will
retain the ref, rather than the conditions under which we release it.
The only way (page == current->arch.old_guest_table) can be true is if
preemptible is true; so remove this from the query itself, and add an
ASSERT() to that effect on the opposite path.
No functional change intended.
NB that alloc_lN_table() mishandle the "linear pt failure" situation
described in the comment; this will be addressed in a future patch.
This is part of XSA-299.
Reported-by: George Dunlap <george.dunlap@citrix.com>
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
This is in mainly in preparation for _put_page_type taking the
partial_flags value in the future. It also makes it easier to read in
the caller (since you see a flag name rather than `true` or `false`).
No functional change intended.
This is part of XSA-299.
Reported-by: George Dunlap <george.dunlap@citrix.com>
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
At the moment, partial_pte is a tri-state that contains two distinct bits
of information:
1. If zero, the pte at index [nr_validated_ptes] is un-validated. If
non-zero, the pte was last seen with PGT_partial set.
2. If positive, the pte at index [nr_validated_ptes] does not hold a
general reference count. If negative, it does.
To make future patches more clear, separate out this functionality
into two distinct, named bits: PTF_partial_set (for #1) and
PTF_partial_general_ref (for #2).
Additionally, a number of functions which need this information also
take other flags to control behavior (such as `preemptible` and
`defer`). These are hard to read in the caller (since you only see
'true' or 'false'), and ugly when many are added together. In
preparation for adding yet another flag in a future patch, collapse
all of these into a single `flag` variable.
NB that this does mean checking for what was previously the '-1'
condition a bit more ugly in the put_page_from_lNe functions (since
you have to check for both partial_set and general ref); but this
clause will go away in a future patch.
Also note that the original comment had an off-by-one error:
partial_flags (like partial_pte before it) concerns
plNe[nr_validated_ptes], not plNe[nr_validated_ptes+1].
No functional change intended.
This is part of XSA-299.
Reported-by: George Dunlap <george.dunlap@citrix.com>
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
When unpinning pagetables, if an operation is interrupted,
relinquish_memory() re-sets PGT_pinned so that the un-pin will
pickedup again when the hypercall restarts.
This is appropriate when put_page_and_type_preemptible() returns
-EINTR, which indicates that the page is back in its initial state
(i.e., completely validated). However, for -ERESTART, this leads to a
state where a page has both PGT_pinned and PGT_partial set.
This happens to work at the moment, although it's not really a
"canonical" state; but in subsequent patches, where we need to make a
distinction in handling between PGT_validated and PGT_partial pages,
this causes issues.
Move to a "canonical" state by:
- Only re-setting PGT_pinned on -EINTR
- Re-dropping the refcount held by PGT_pinned on -ERESTART
In the latter case, the PGT_partial bit will be cleared further down
with the rest of the other PGT_partial pages.
While here, clean up some trainling whitespace.
This is part of XSA-299.
Reported-by: George Dunlap <george.dunlap@citrix.com>
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
On detection of a potential L1TF issue, most validation code returns
-ERESTART to allow the switch to shadow mode to happen and cause the
original operation to be restarted.
However, in the validation code, the return value -ERESTART has been
repurposed to indicate 1) the function has partially completed
something which needs to be undone, and 2) calling put_page_type()
should cleanly undo it. This causes problems in several places.
For L1 tables, on receiving an -ERESTART return from alloc_l1_table(),
alloc_page_type() will set PGT_partial on the page. If for some
reason the original operation never restarts, then on domain
destruction, relinquish_memory() will call free_page_type() on the
page.
Unfortunately, alloc_ and free_l1_table() aren't set up to deal with
PGT_partial. When returning a failure, alloc_l1_table() always
de-validates whatever it's validated so far, and free_l1_table()
always devalidates the whole page. This means that if
relinquish_memory() calls free_page_type() on an L1 that didn't
complete due to an L1TF, it will call put_page_from_l1e() on "page
entries" that have never been validated.
For L2+ tables, setting rc to ERESTART causes the rest of the
alloc_lN_table() function to *think* that the entry in question will
have PGT_partial set. This will cause it to set partial_pte = 1. If
relinqush_memory() then calls free_page_type() on one of those pages,
then free_lN_table() will call put_page_from_lNe() on the entry when
it shouldn't.
Rather than indicating -ERESTART, indicate -EINTR. This is the code
to indicate that nothing has changed from when you started the call
(which is effectively how alloc_l1_table() handles errors).
mod_lN_entry() shouldn't have any of these types of problems, so leave
potential changes there for a clean-up patch later.
This is part of XSA-299.
Reported-by: George Dunlap <george.dunlap@citrix.com>
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Commits ec83f82562 "mm.h: add helper function to test-and-clear
_PGC_allocated" (and subsequent fix-up 44a887d021 "mm.h: fix BUG_ON()
condition in put_page_alloc_ref()") introduced a BUG_ON() to detect
unsafe behavior of callers.
Unfortunately this condition still turns out to be too strict.
xenheap pages are somewhat "magic": calling free_domheap_pages() on
them will not cause free_heap_pages() to be called: whichever part of
Xen allocated them specially must call free_xenheap_pages()
specifically. (They'll also be handled appropriately at domain
destruction time.)
Only crash Xen when put_page_alloc_ref() finds only a single refcount
if the page is not a xenheap page.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Tested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
mem-set is the primary command that users will need to use and
understand. Move it first, and clarify the wording; also specify that
you can't set the target higher than maxmem from the domain config.
mem-max is actually a pretty useless command at the moment. Clarify
that users are not expected to use it; and document all of its quirky
behavior.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Reviewed-by: Lars Kurth <lars.kurth@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Much of the tools and configure makefile actually have a python2
dependency; specify this. It also assumes that `python` points to `python2`;
document how to work around this on systems where this is false.
Also update second version requirement listed to match the first.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
In order for a PV domain to set up DMA from a passed-through device to
one of its pages, the page must be mapped in the IOMMU. On the other
hand, before a PV page may be used as a "special" page type (such as a
pagetable or descriptor table), it _must not_ be writable in the IOMMU
(otherwise a malicious guest could DMA arbitrary page tables into the
memory, bypassing Xen's safety checks); and Xen's current rule is to
have such pages not in the IOMMU at all.
At the moment, in order to accomplish this, the code borrows HVM
domain's "physmap" concept: When a page is assigned to a guest,
guess_physmap_add_entry() is called, which for PV guests, will create
a writable IOMMU mapping; and when a page is removed,
guest_physmap_remove_entry() is called, which will remove the mapping.
Additionally, when a page gains the PGT_writable page type, the page
will be added into the IOMMU; and when the page changes away from a
PGT_writable type, the page will be removed from the IOMMU.
Unfortunately, borrowing the "physmap" concept from HVM domains is
problematic. HVM domains have a lock on their p2m tables, ensuring
synchronization between modifications to the p2m; and all hypercall
parameters must first be translated through the p2m before being used.
Trying to mix this locked-and-gated approach with PV's lock-free
approach leads to several races and inconsistencies:
* A race between a page being assigned and it being put into the
physmap; for example:
- P1: call populate_physmap() { A = allocate_domheap_pages() }
- P2: Guess page A's mfn, and call decrease_reservation(A). A is owned by the domain,
and so Xen will clear the PGC_allocated bit and free the page
- P1: finishes populate_physmap() { guest_physmap_add_entry() }
Now the domain has a writable IOMMU mapping to a page it no longer owns.
* Pages start out as type PGT_none, but with a writable IOMMU mapping.
If a guest uses a page as a page table without ever having created a
writable mapping, the IOMMU mapping will not be removed; the guest
will have a writable IOMMU mapping to a page it is currently using
as a page table.
* A newly-allocated page can be DMA'd into with no special actions on
the part of the guest; However, if a page is promoted to a
non-writable type, the page must be mapped with a writable type before
DMA'ing to it again, or the transaction will fail.
To fix this, do away with the "PV physmap" concept entirely, and
replace it with the following IOMMU discipline for PV guests:
- (type == PGT_writable) <=> in iommu (even if type_count == 0)
- Upon a final put_page(), check to see if type is PGT_writable; if so,
iommu_unmap.
In order to achieve that:
- Remove PV IOMMU related code from guest_physmap_*
- Repurpose cleanup_page_cacheattr() into a general
cleanup_page_mappings() function, which will both fix up Xen
mappings for pages with special cache attributes, and also check for
a PGT_writable type and remove pages if appropriate.
- For compatibility with current guests, grab-and-release a
PGT_writable_page type for PV guests in guest_physmap_add_entry().
This will cause most "normal" guest pages to start out life with
PGT_writable_page type (and thus an IOMMU mapping), but no type
count (so that they can be used as special cases at will).
Also, note that there is one exception to to the "PGT_writable => in
iommu" rule: xenheap pages shared with guests may be given a
PGT_writable type with one type reference. This reference prevents
the type from changing, which in turn prevents page from gaining an
IOMMU mapping in get_page_type(). It's not clear whether this was
intentional or not, but it's not something to change in a security
update.
This is XSA-288.
Reported-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
The original rules for `struct page` required the following invariants
at all times:
- refcount > 0 implies owner != NULL
- PGC_allocated implies refcount > 0
steal_page, in a misguided attempt to protect against unknown races,
violates both of these rules, thus introducing other races:
- Temporarily, the count_info has the refcount go to 0 while
PGC_allocated is set
- It explicitly returns the page PGC_allocated set, but owner == NULL
and page not on the page_list.
The second one meant that page_get_owner_and_reference() could return
NULL even after having successfully grabbed a reference on the page,
leading the caller to leak the reference (since "couldn't get ref" and
"got ref but no owner" look the same).
Furthermore, rather than grabbing a page reference to ensure that the
owner doesn't change under its feet, it appears to rely on holding
d->page_alloc lock to prevent this.
Unfortunately, this is ineffective: page->owner remains non-NULL for
some time after the count has been set to 0; meaning that it would be
entirely possible for the page to be freed and re-allocated to a
different domain between the page_get_owner() check and the count_info
check.
Modify steal_page to instead follow the appropriate access discipline,
taking the page through series of states similar to being freed and
then re-allocated with MEMF_no_owner:
- Grab an extra reference to make sure we don't race with anyone else
freeing the page
- Drop both references and PGC_allocated atomically, so that (if
successful), anyone else trying to grab a reference will fail
- Attempt to reset Xen's mappings
- Reset the rest of the state.
Then, modify the two callers appropriately:
- Leave count_info alone (it's already been cleared)
- Call free_domheap_page() directly if appropriate
- Call assign_pages() rather than open-coding a partial assign
With all callers to assign_pages() now passing in pages with the
type_info field clear, tighten the respective assertion there.
This is XSA-287.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
domain_pause_except_self() was introduced to allow a domain to pause
itself while doing altp2m operations. However, as written, it has a
risk fo deadlock if two vcpus enter the loop at the same time.
Luckily, there's already a solution for this: Attempt to call domain's
hypercall_deadlock_mutex, and restart the entire hypercall if you
fail.
Make domain_pause_except_self() attempt to grab this mutex when
pausing itself, returning -ERESTART if it fails. Have the callers
check for errors and pass the value up. In both cases, the top-level
do_hvm_op() should DTRT when -ERESTART is returned.
The (necessary) reuse of the hypercall deadlock mutex poses the risk
of getting called from a context where the lock was already acquired
(e.g. someone may (say) call domctl_lock(), then afterwards call
domain_pause_except_self()). However, in the interest of not
overcomplicating things, no changes are made here to the mutex.
Attempted nesting of this lock isn't a security issue, because all
that will happen is that the vcpu will livelock taking continuations.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Tested-by: Razvan Cojocaru <rcojocaru@bitdefender.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
Remove "chatty" and redundant information from the xl man page;
restrict it to functional descriptions only, and point instead to
qemu-depriv.pandoc and SUPPORT.md as locations for "canonical"
information.
Add a man page entry for device_model_user.
Update qemu-deprivilege.pandoc:
Changes in missing feature list:
- Migration is functional
- But qdisk backends are not
Add a missing restriction list.
The following statements from the man page are dropped:
- Mentioning PV; PV guests never have a device model.
- Drop the confusing statement about stdvga and cirrus vga options.
- Re-used domain IDs are now handled.
- Device models should no longer be able to create world-readable
files on dom0's filesystem.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
Apparently older versions of gcc, when building with debug=n, the
uninitialized variable logic gets confused. Distros on which a
non-debug build will fail include:
- Centos 7
- Debian Jessie
- Ubuntu Trusty
It seems to be one particular path confusing the logic; so just set it
on that path to keep the compiler happy, while still catching other
potential paths where it might be unset.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Untrusted device models must be killed by uid rather than by pid for
safety. To do this reliably, we need another uid, not used for any
other purpose, from which to make the kill system call.
When using xen-qemuuser-range-base, we can repurpose
xen-qemuuser-range-base itself as a UID from which to kill other
devicemodel uids (since domain ID 0 should never have a device model
associated with it).
However, we'd like people to be able to use the device_model_user
feature without also defining xen-qemuuser-range-base (which requires
the ability to 'reserve' 32k+ user IDs).
To that end, introduce the xen-qemuuser-reaper id. When killing by
UID, first look for and use that ID if available; then fall back to
xen-qemuuser-range-base.
Document the new call in docs/features/qemu-deprivilege.pandoc.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Using kill(-1) to killing an untrusted dm process with the real uid
equal to the dm_uid isn't guaranteed to succeed: the process in
question may be able to kill the reaper process after the setresuid()
and before the kill().
Instead, set the real uid to the QEMU user for domain 0
(QEMU_USER_RANGE_BASE + 0). The reaper process will still be able to
kill the dm process, but not vice versa.
This, in turn, requires locking to make sure that only one reaper
process is using that uid at a time; otherwise one reaper process may
kill the other reaper process.
Create a lockfile in RUNDIR/dm-reaper-lock, and grab the lock before
executing kill.
In the event that we can't get the lock for some reason, go ahead with
the kill using dm_uid for both real and effective UIDs. This isn't
guaranteed to work, but it's no worse than not trying to kill the
process at all.
NB that this effectively requires admins using device_model_user to
also define xen_qemuuser_range_base; this will be addressed in
subsequent patches.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
The privcmd fd that a dm_restrict'ed QEMU has gives it permission to
one specific domain ID. This domain ID will probably eventually be
used again. It is therefore necessary to make absolutely sure that a
rogue QEMU process cannot hang around after its domain has exited.
Killing QEMU by pid is insufficient in this situation, because QEMU
may be able to fork() to escape killing. It is surprisingly tricky to
kill a process which can call fork() without races; the only reliable
way is to use kill(-1) to kill all processes with a given uid.
We can use this method only when we're sure that there's only one QEMU
instance per uid. Add a dm_uid into the domain_build_state struct,
and set it in libxl__domain_get_device_model_uid() when it's safe to
kill by UID. Store this in xenstore next to device-model-pid.
On domain destroy, check to see if device-model-uid is present in
xenstore. If so, fork off a reaper process, setuid to that uid, and
do kill(-9) to kill all uids of that type. Otherwise, carry on
destroying by pid.
While we're here, make libxl__destroy_device_model() consistently:
1. Return an error when anything fails
2. But continue to do as much clean-up as possible
NOTE that this is not yet completely safe: with ruid == dm_uid, the
device model may be able to kill(-9) the 'reaper' process before the
reaper process can kill it. Further patches will address this.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Or at least, give it an asynchronous interface so that we can make it
actually asynchronous in subsequent patches.
Create state structures and callback function signatures. Add the
state structure to libxl__destroy_domid_state. Break
libxl__destroy_domid down into two functions.
No functional change intended.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Removing the qmp connection is logically part of the device model
destruction; having the caller destroy it is a mild layering
violation.
Move libxl__qmp_cleanup() into libxl__destroy_device_model(). This
will make it easier when we make devicemodel destruction asynchronous.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
At the moment, we check for equivalence to literal "root" before
deciding whether to add the `runas` command-line option to QEMU. This
is unsatisfactory for several reasons.
First, just because the string doesn't match "root" doesn't mean the
final uid won't end up being zero; in particular, the range_base
calculations may end up producing "0:NNN", which would be root in any
case.
Secondly, it's almost certainly a configuration error if the resulting
uid ends up to be zero; rather than silently do what was specified but
probably not intended, throw an error.
To fix this, check for root once in
libxl__domain_get_device_model_uid. If the result is root, return an
error; if appropriate, set `runas`.
After that, assume that the presence of state->dm_runas implies that a
`runas` argument should be constructed.
One side effect of this is to check whether device_model_user exists
before passing it to qemu, resulting in better error reporting.
While we're here:
- Refactor the function to use the "goto out" idiom
- Use 'rc' rather than 'ret', in line with CODING_STYLE
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
A number of subsequent patches rely on as-yet undefined behavior for
what the `device_model_user` parameter does. Rather than implement it
incorrectly (or randomly), or remove the feature, describe an expected
usage for the feature. Further patches will make decisions based on
this expected usage.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Bring conventions more in line with libxl__xs_read_checked():
- If found, return 0 and set pointer to non-NULL
- If not found, return 0 and set pointer to NULL
- On error, return libxl-style error number.
Update documentation to match.
Use CODING_STYLE compliant `r` rather than `ret`.
On error, log the error code before returning instead of discarding
it.
Now that it only returns 0 or errno, update caller error checks to be
`if (ret)` rather than `if (ret < 0)`.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
QEMU_USER_BASE allows a user to specify the UID to use when running
the devicemodel for a specific domain number. Unfortunately, this is
not really practical: It requires nearly 32,000 entries in
/etc/passwd. QEMU_USER_RANGE_BASE is much more practical.
Remove support for QEMU_USER_BASE.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
To reliably kill an untrusted devicemodel, we need to know not only
its pid, but its uid. In preparation for this, move the userid
determination logic into a helper function.
Create a new field, `dm_runas`, in libxl__domain_build_state to store
the value during domain creation.
This change also removes unnecessary duplication of the argument
construction code.
While here, clean up some minor CODING_STYLE infractions (space
between * and variable name).
No functional change intended.
While here, delete some trailing whitespace.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Limit the ability of a potentially compromised QEMU to consume system
resources. Key limits:
- RLIMIT_FSIZE (file size): 256KiB
- RLIMIT_NPROC (after uid changes to a unique uid)
Probably unnecessary limits but why not:
- RLIMIT_CORE: 0
- RLIMIT_MSGQUEUE: 0
- RLIMIT_LOCKS: 0
- RLIMIT_MEMLOCK: 0
NB that we do not yet set RLIMIT_AS (total virtual memory) or
RLIMIT_NOFILES (number of open files), since these require more care
and/or more coordination with QEMU to implement.
Suggested-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
---
Changes since v4:
- Put global headers before local headers (sugg by Paul)
- Move #undif inside the braces (sugg by Paul)
Changes since v3:
- Align RLIMIT_ENTRY list for easier reading
- Fix wrong format string specifier
- Get rid of some trailing whitespace
Changes since v2:
- Use a macro to define rlimit entries
- Use RLIMIT_NLIMITS as an end-of-list marker, rather than -1
- Various style clean-ups
CC: Ian Jackson <ian.jackson@citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
CC: Anthony Perard <anthony.perard@citrix.com>
QEMU running under Xen doesn't need mount or IPC functionality.
Create and enter separate namespaces for each of these before
executing QEMU, so that in the event that other restrictions fail, the
process won't be able to even name system mount points or exsting
non-file-based IPC descriptors to attempt to attack them.
Unsharing is something a process can only do to itself (it would
seem); so add an os-specific "dm_preexec_restrict()" hook just before
we exec() the device model.
Also add checks to depriv-process-checker.sh to verify that dm is
running in a new namespace (or at least, a different one than the
caller).
Suggested-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
---
Changes since v4:
- Fix function prototype for netbsd code
Changes since v3:
- Fix some more style issues
Changes since v2:
- Return an error rather than calling exit()
- Use LOGE() and print to the current stderr fd, rather than
printing to the new stderr fd via write()
- Use r for external return values rather than rc.
CC: Ian Jackson <ian.jackson@citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
CC: Anthony Perard <anthony.perard@citrix.com>
When dm_restrict is enabled, ask QEMU to chroot into an empty directory.
* Create $XEN_RUN_DIR/qemu-root-<domid> (deleting the old one if it's there)
* Pass the -chroot option to QEMU
Rather than running `rm -rf` on the directory before creating it
(since there is no library function to do this), simply rmdir the
directory, relying on the fact that the previous QEMU instance, if
properly restricted, shouldn't have been able to write anything
anyway.
Suggested-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
---
Changes since v4:
- Minor change to comment
- Update stale directory name in commit message
Changes since v2:
- Style fixes
- Testing moved to a different patch
CC: Ian Jackson <ian.jackson@citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
CC: Anthony Perard <anthony.perard@citrix.com>
docs/qemu-deprivilege.txt had some basic instructions for using
dm_restrict, but it was incomplete, misleading, and stale.
Update the docs in a number of ways.
First, separate user-facing documentation and technical description
into docs/features and docs/design, respectively.
In the feature doc:
* Introduce a section mentioning minimim versions of Linux, Xen, and
qemu required (TBD)
* Fix the discussion of qemu userid. Mention xen-qemuuser-range-base,
and provide example shell code that actually has some hope of working
(instead of failing out after creating 900 userids).
* Describe how to enable restrictions, as well as features which
probably don't or definitely don't work.
In the design doc, introduce a "Technical Details" section which
describes specifically what restrictions are currently done, and also
what restrictions we are looking at doing in the future.
The idea here is that as we implement the various items for the
future, we move them from "Restrictions still to do" to "Restrictions
done". This can also act as a design document -- a place for public
discussion of what can or should be done and how.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
---
Changes since v4:
- Remove unnecessary FIXME
- Remove stale "Add SUPPORT.md"
Changes since v3:
- Fix typo (32->16)
- Use an example value not close to the `nobody` uids, but still a
multiple of 2^16.
- Mention that using a multiple of 2^16 may have advantages.
- Have the example create a group as well
- Reorganize two comments on the "range-base" method for clarity
Changes since v2:
- Extraneous privcmd / evtchn instances aren't closed
- Expand description of how to test fd deprivileging
- Rework and clarify two namespace sections, give reference for QEMU NAK
- Add more information about migration technical challenges
- In UID section, mention possibility of container ID collisions.
- Fix name of design document.
- Add SUPPORT.md statement. Specify Linux, to make sure that FreeBSD is
evaluated separately.
- Mention that `-sandbox` is a blacklist and why
Changes since v1:
- Break into two, and move into appropriate directories (rather than 'misc')
- Updated version requirements
- Distinguish between features which "don't yet work" and features which we never expect to work
- Update description of xen-restrict functionality
- Reorder and expand further restrictions
- Make it more clear which restrictions are available on Linux only
- Include detailed description of how to kill a process
- Add RLIMIT_NPROC as something we can do without further changes to qemu
- Document the need to check for the sandbox feature before using it
Thank you to Ross Lagerwall, whose description of what XenServer is
doing formed much of the basis for the text here.
CC: Ian Jackson <ian.jackson@citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
CC: Andrew Cooper <andrew.cooper3@citrix.com>
CC: Jan Beulich <jbeulich@suse.com>
CC: Tim Deegan <tim@xen.org>
CC: Konrad Wilk <konrad.wilk@oracle.com>
CC: Stefano Stabellini <sstabellini@kernel.org>
CC: Julien Grall <julien.grall@arm.com>
CC: Anthony Perard <anthony.perard@citrix.com>
CC: Ross Lagerwall <ross.lagerwall@citrix.com>
Credit2 was declared "supported" in 4.8, and as of 4.10 had two other
critical features implemented (soft affinity / NUMA and caps).
Why change the default?
The code is better: more predictable, less jitter, easier to determine
how modifications will affect overall behavior, easier in the future
to make load-balancing behavior more subtle (e.g., taking into account
the cost of powering up extra cores, &c).
Overall performance compared to Credit1 is somewhat of a mixed bag.
Unfortunately most of what I have are tests using XenServer's internal
perf testing system, so I can't share the raw data (via links anyway).
Here is a summary of data from an internal e-mail Dario sent in the
past:
* DVDbench: On underloaded systems, credit2 outperformed credit1 by
about 4%. On overloaded systems, credit2 underperformed by about 3%.
* On a range of tests (unixbench, lmbench, &c), credit and credit2
perform within 5% of each other (up and down).
* Credit2 fairly consistently beats credit for TCP-style workloads.
* Credit2 is sometimes equal to, sometimes 5-15% worse than, credit for
synthetic CPU workloads (e.g., Dhrystone).
* On LoginVSI, credit2 fairly consistently outperforms credit by about 10%.
Credit2, like credit, has a number of workloads / setups for which
performance could be improved. Personally I think networking and
partially-loaded systems is going to be more representative of what
Xen is actually used for; so I think credit2 is on the whole the
better scheduler to use by default. And in any case, making those
improvements on credit2 will be easier than on credit.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Dario Faggioli <dfaggioli@suse.com>
The name of the "with_gla" flag is confusing; it has nothing to do
with the existence or lack thereof of a faulting GLA, but rather where
the fault originated. The npfec.kind value is always valid, and
should thus be propagated, regardless of whether gla_valid is set or
not.
In particular, gla_valid will never be set on AMD systems; but
npfec.kind will still be valid and should still be propagated.
Signed-off-by: Alexandru Isaila <aisaila@bitdefender.com>
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Alexandru Isaila <aisaila@bitdefender.com>
Acked-by: Razvan Cojocaru <rcojocaru@bitdefender.com>
George Dunlap