The manual of xl says --clear option is supported and that option
worked for xm. Add that to xl now.
Signed-off-by: Xiao Liang <xiliang@redhat.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Do not setup vfb+vkb when no access method was configured. Then check if
qemu is really needed.
The only not configurable thing forcing qemu running in dom0 after this
change are consoles used to save/restore. But even in that case, there
is much smaller part of qemu exposed.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
When operating on an Intel graphics device, iommu_enable_translation()
panicked (force_iommu==1) or warned (force_iommu==0) about the BIOS if
is_igd_vt_enabled_quirk() returned 0. That's good if the actual BIOS
problem has been detected. But since commit 1463411, returning 0 could
also happen if the user simply passed "iommu=no-igfx", in which case
bailing out with an info message (instead of a panic/warning) would be
more appropriate.
The panic broke the combination "iommu=force,no-igfx", and also the case
where "iommu=no-igfx" is passed but force_iommu=1 is set automatically
by x2apic_bsp_setup().
Move the iommu_igfx check from is_igd_vt_enabled_quirk() into its only
caller iommu_enable_translation(), and tweak the logic.
Signed-off-by: Rusty Bird <rustybird@openmailbox.org>
Acked-by: Kevin Tian <kevin.tian@intel.com>
This patch implements the xl/xc changes to support set CBM
for L2 CAT.
The new level option is introduced to original CAT setting
command in order to set CBM for specified level CAT.
- 'xl psr-cat-set' is updated to set cache capacity bitmasks(CBM)
for a domain according to input cache level.
root@:~$ xl psr-cat-set -l2 1 0x7f
root@:~$ xl psr-cat-show -l2 1
Socket ID : 0
Default CBM : 0xff
ID NAME CBM
1 ubuntu14 0x7f
Signed-off-by: He Chen <he.chen@linux.intel.com>
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
This patch implements changes in xl/xc changes to support
showing CBM of L2 CAT.
The new level option is introduced to original CAT showing
command in order to show CBM for specified level CAT.
- 'xl psr-cat-show' is updated to show CBM of a domain
according to input cache level.
Examples:
root@:~$ xl psr-cat-show -l2 1
Socket ID : 0
Default CBM : 0xff
ID NAME CBM
1 ubuntu14 0x7f
Signed-off-by: He Chen <he.chen@linux.intel.com>
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
This patch implements xl/xc changes to support get HW info
for L2 CAT.
'xl psr-hwinfo' is updated to show both L3 CAT and L2 CAT
info.
Example(on machine which only supports L2 CAT):
Cache Monitoring Technology (CMT):
Enabled : 0
Cache Allocation Technology (CAT): L2
Socket ID : 0
Maximum COS : 3
CBM length : 8
Default CBM : 0xff
Signed-off-by: He Chen <he.chen@linux.intel.com>
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
This patch implements L2 CAT set value related callback function
and domctl interface.
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
This patch implements L2 CAT get HW info flow and interface in sysctl.
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
This patch implements L3 CDP set value related callback function.
With this patch, 'psr-cat-cbm-set' command can work for L3 CDP.
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
This patch implements get HW info flow for CDP including L3 CDP callback
function. The flow is almost same as L3 CAT.
With this patch, 'psr-hwinfo' can work for L3 CDP.
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
This patch implements the CPU init flow for CDP. The flow is almost
same as L3 CAT.
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Continue from previous patch:
'x86: refactor psr: L3 CAT: set value: implement cos id picking flow.'
We have got the feature value and COS ID to set. Then, we write MSRs of the
designated feature.
Till now, set value process is completed.
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Continue from previous patch:
'x86: refactor psr: L3 CAT: set value: implement cos finding flow.'
If fail to find a COS ID, we need pick a new COS ID for domain. Only COS ID
that ref[COS_ID] is 1 or 0 can be picked to input a new set feature values.
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Continue from patch:
'x86: refactor psr: L3 CAT: set value: assemble features value array'
We can try to find if there is a COS ID on which all features' COS registers
values are same as the array assembled before.
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Only can one COS ID be used by one domain at one time. That means all enabled
features' COS registers at this COS ID are valid for this domain at that time.
When user updates a feature's value, we need make sure all other features'
values are not affected. So, we firstly need gather an array which contains
all features current values and replace the setting feature's value in array
to new value.
Then, we can try to find if there is a COS ID on which all features' COS
registers values are same as the array. If we can find, we just use this COS
ID. If fail to find, we need pick a new COS ID.
This patch implements value array assembling flow.
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
As set value flow is the most complicated one in psr, it will be
divided to some patches to make things clearer. This patch
implements the set value framework to show a whole picture firstly.
It also changes domctl interface to make it more general.
To make the set value flow be general and can support multiple features
at same time, it includes below steps:
1. Test and set dom_ids bit corresponding to the domain. If the old bit is 0
which means the domain's COS ID is invalid, restore COS ID to 0. If the
COS ID is valid, get the COS ID that current domain is using.
2. Gather a value array to store all features current value
into it and replace the current value of the feature which is
being set to the new input value.
3. Find if there is already a COS ID on which all features'
values are same as the array. Then, we can reuse this COS
ID.
4. If fail to find, we need pick an available COS ID. Only COS ID which ref
is 0 or 1 can be picked.
5. Write the feature's MSRs according to the COS ID.
6. Update ref according to COS ID.
7. Save the COS ID into current domain's psr_cos_ids[socket] so that we
can know which COS the domain is using on the socket.
So, some functions are abstracted and the callback functions will be
implemented in next patches.
Here is an example to understand the process. The CPU supports
two featuers, e.g. L3 CAT and L2 CAT. User wants to set L3 CAT
of Dom1 to 0x1ff.
1. At the initial time, the old_cos of Dom1 is 0. The COS registers values
are below at this time.
-------------------------------
| COS 0 | COS 1 | COS 2 | ... |
-------------------------------
L3 CAT | 0x7ff | 0x7ff | 0x7ff | ... |
-------------------------------
L2 CAT | 0xff | 0xff | 0xff | ... |
-------------------------------
2. Gather the value array and insert new value into it:
val[0]: 0x1ff
val[1]: 0xff
3. It cannot find a matching COS.
4. Pick COS 1 to store the value set.
5. Write the L3 CAT COS 1 registers. The COS registers values are
changed to below now.
-------------------------------
| COS 0 | COS 1 | COS 2 | ... |
-------------------------------
L3 CAT | 0x7ff | 0x1ff | ... | ... |
-------------------------------
L2 CAT | 0xff | 0xff | ... | ... |
-------------------------------
6. The ref[1] is increased to 1 because Dom1 is using it now.
7. Save 1 to Dom1's psr_cos_ids[socket].
Then, user wants to set L3 CAT of Dom2 to 0x1ff too. The old_cos
of Dom2 is 0 too. Repeat above flow.
The val array assembled is:
val[0]: 0x1ff
val[1]: 0xff
So, it can find a matching COS, COS 1. Then, it can reuse COS 1
for Dom2.
The ref[1] is increased to 2 now because both Dom1 and Dom2 are
using this COS ID. Set 1 to Dom2's psr_cos_ids[socket].
There is one thing need to emphasize that we need restore domain's COS ID to
0 when socket is offline. Otherwise, a wrong COS ID will be used when the
socket is online again. That may cause user see the wrong CBM shown. But it
takes much time to iterate all domains to restore COS ID to 0. So, we define
a 'dom_ids[]' to represents all domains, one bit corresponds to one domain.
If the bit is 0 when entering 'psr_ctxt_switch_to', that means this is the
first time the domain is switched to this socket or domain's COS ID has not
been set since the socket is online. So, the COS ID set to ASSOC register on
this socket should be default value, 0. If not, that means the domain's COS
ID has been set when the socket was online. So, this COS ID is valid and we
can directly use it. We restore the domain's COS ID to 0 if the bit
corresponding to the domain is 0 but the domain's COS ID is not 0 when
'psr_get_val' and 'psr_set_val' is called. This can avoid CPU serialization
if restoring action is exectued in 'psr_ctxt_switch_to'.
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
There is an interface in user space to show feature value of
domains.
This patch implements get value flow in hypervisor.
It also changes domctl interface to make it more general.
With this patch, 'psr-cat-show' can work for L3 CAT but not for
L3 code/data which is implemented in CDP related patches.
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
This patch implements get HW info flow including L3 CAT callback
function.
It also changes sysctl interface to make it more general.
With this patch, 'psr-hwinfo' can work for L3 CAT.
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
This patch implements the Domain init/free and schedule flows.
- When domain init, its psr resource should be allocated.
- When domain free, its psr resource should be freed too.
- When domain is scheduled, its COS ID on the socket should be
set into ASSOC register to make corresponding COS MSR value
work.
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
To construct an extendible framework, we need analyze PSR features
and abstract the common things and feature specific things. Then,
encapsulate them into different data structures.
By analyzing PSR features, we can get below map.
+------+------+------+
--------->| Dom0 | Dom1 | ... |
| +------+------+------+
| |
|Dom ID | cos_id of domain
| V
| +-----------------------------------------------------------------------------+
User --------->| PSR |
Socket ID | +--------------+---------------+---------------+ |
| | Socket0 Info | Socket 1 Info | ... | |
| +--------------+---------------+---------------+ |
| | cos_id=0 cos_id=1 ... |
| | +-----------------------+-----------------------+-----------+ |
| |->Ref : | ref 0 | ref 1 | ... | |
| | +-----------------------+-----------------------+-----------+ |
| | +-----------------------+-----------------------+-----------+ |
| |->L3 CAT: | cos 0 | cos 1 | ... | |
| | +-----------------------+-----------------------+-----------+ |
| | +-----------------------+-----------------------+-----------+ |
| |->L2 CAT: | cos 0 | cos 1 | ... | |
| | +-----------------------+-----------------------+-----------+ |
| | +-----------+-----------+-----------+-----------+-----------+ |
| |->CDP : | cos0 code | cos0 data | cos1 code | cos1 data | ... | |
| +-----------+-----------+-----------+-----------+-----------+ |
+-----------------------------------------------------------------------------+
So, we need define a socket info data structure, 'struct
psr_socket_info' to manage information per socket. It contains a
reference count array according to COS ID and a feature array to
manage all features enabled. Every entry of the reference count
array is used to record how many domains are using the COS registers
according to the COS ID. For example, L3 CAT and L2 CAT are enabled,
Dom1 uses COS_ID=1 registers of both features to save CBM values, like
below.
+-------+-------+-------+-----+
| COS 0 | COS 1 | COS 2 | ... |
+-------+-------+-------+-----+
L3 CAT | 0x7ff | 0x1ff | ... | ... |
+-------+-------+-------+-----+
L2 CAT | 0xff | 0xff | ... | ... |
+-------+-------+-------+-----+
If Dom2 has same CBM values, it can reuse these registers which COS_ID=1.
That means, both Dom1 and Dom2 use same COS registers(ID=1) to keep same
L3/L2 values. So, the value of ref[1] is 2 which means 2 domains are using
COS_ID 1.
To manage a feature, we need define a feature node data structure,
'struct feat_node', to manage feature's specific HW info, and an array of all
COS registers values of this feature.
To manage feature properties, we need define a feature property data structure,
'struct feat_props', to manage common properties (callback functions - all
feature's specific behaviors are encapsulated into these callback functions,
and generic values - e.g. the cos_max), the feature independent values.
CDP is a special feature which uses two entries of the array
for one COS ID. So, the number of CDP COS registers is the half of L3
CAT. E.g. L3 CAT has 16 COS registers, then CDP has 8 COS registers if
it is enabled. CDP uses the COS registers array as below.
+-----------+-----------+-----------+-----------+-----------+
CDP cos_reg_val[] index: | 0 | 1 | 2 | 3 | ... |
+-----------+-----------+-----------+-----------+-----------+
value: | cos0 code | cos0 data | cos1 code | cos1 data | ... |
+-----------+-----------+-----------+-----------+-----------+
For more details, please refer SDM and patches to implement 'get value' and
'set value'.
This patch also implements the CPU init and free flow including L3 CAT
initialization and some resources free. It includes below flows:
1. presmp init:
- parse command line parameter.
- allocate socket info for every socket.
- allocate feature resource.
- initialize socket info, get feature info and add feature into feature
array per cpuid result.
- free resources allocated if error happens.
- register cpu notifier to handle cpu events.
2. cpu notifier:
- handle cpu online events, if initialization work has been done before,
do nothing.
- handle cpu offline events, if it is the last cpu offline, free some
socket resources.
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
The current cache allocation codes in psr.c do not consider
future features addition and are not friendly to extend.
To make psr.c be more flexible to add new features and fulfill
the program principle, open for extension but closed for
modification, we have to refactor the psr.c:
1. Analyze cache allocation features and abstract general data
structures.
2. Analyze the init and all other functions flow, abstract all
steps that different features may have different implementations.
Make these steps be callback functions and register feature
specific fuctions. Then, the main processes will not be changed
when introducing a new feature.
Because the quantity of refactor codes is big and the logics are
changed a lot, it will cause reviewers confused if just change
old codes. Reviewers have to understand both old codes and new
implementations. After review iterations from V1 to V3, Jan has
proposed to remove all old cache allocation codes firstly, then
implement new codes step by step. This will help to make codes
be more easily reviewable.
There is no construction without destruction. So, this patch
removes all current L3 CAT/CDP codes in psr.c. The following
patches will introduce the new mechanism.
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
This patch moves 'cpuid_count_leaf' from cpuid.c to processor.h to
make it available to external codes.
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
This patch creates CAT and CDP feature document in doc/features/. It describes
key points to implement L3 CAT/CDP and L2 CAT which is described in details in
Intel SDM "INTEL® RESOURCE DIRECTOR TECHNOLOGY (INTEL® RDT) ALLOCATION FEATURES".
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Move pre-existing PAGE_(SHIFT|SIZE|MASK|ALIGN)_(4K|64K) and
introduce corresponding defines for 16K page granularity to/in a
common place in xen/page-defs.h to allow later commits to use the
consolidated defines.
Signed-off-by: Sergej Proskurin <proskurin@sec.in.tum.de>
Acked-by: Jan Beulich <jbeulich@suse.com>
The patch aligns the code of rbtree related files with Linux tree.
This will minimize the conflicts during any future porting from Linux tree.
Linux commit till f4b477c47332367d35686bd2b808c2156b96d7c7 for rbtree.h
This includes addition of commented inline functions in rbtree.h, to have
complete replica from Linux tree.
Linux commit till 4c60117811171d867d4f27f17ea07d7419d45dae for rbtree.c
This includes updates in comments in header note in rbtree.c.
Signed-off-by: Praveen Kumar <kpraveen.lkml@gmail.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Convert source for xl-numa-placement.7 from markdown to pod.
This removes the buildtime requirement for pandoc, and subsequently the
need for ghc, in the chain for BuildRequires of xen.rpm.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Convert source for xl-network-configuration.5 from markdown to pod.
This removes the buildtime requirement for pandoc, and subsequently the
need for ghc, in the chain for BuildRequires of xen.rpm.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Convert source for xen-pv-channel.7 from markdown to pod.
This removes the buildtime requirement for pandoc, and subsequently the
need for ghc, in the chain for BuildRequires of xen.rpm.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Running "make uninstall" does not remove all installed files, a
situation which might cause link related issues if xen is re-installed
in a different location.
In order to make uninstall correctly remove the files it is best
the process should be done recursively by mirroring each "install"
target with an "uninstall" who removes the installed files.
An exception to this rule is uninstalling the files produced by
"qemu-xen-dir-remote" and "qemu-xen-traditional-dir", which are external
to the project. These projects do not implement an "uninstall" target so
the files have to be removed manually.
Signed-off-by: Petre Pircalabu <ppircalabu@bitdefender.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
If xc_gntshr_open failed the only thing to cleanup is free allocated
memory. So instead of calling libxenvchan_close (which assume
valid calculated buffers being mmaped already) free memory and return.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
"THE REST" maintainers should always be CCed for any modification that
don't fall under the responsability of a specific component maintainer.
However, the script get_maintainers.pl will remove "THE REST"
maintainers as soon as one maintainer of a specific component will be
present.
Fix the script once for all.
Signed-off-by: Julien Grall <julien.grall@arm.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
In the future, there will be other policy objects, e.g. MSR.
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
These are entirely unused, and are actually the general x86 register encoding,
rather than being SVM specific.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
This allows svm_{get,set}_segment_register() to access the user segments by
array index, as the x86_seg_* constants match the hardware encoding.
While making this alteration, add some newlines for clarity, switch an int for
a bool, and make the functions fail safe in a release build, rather than
crashing Xen.
Bloat-o-meter reports some modest improvements:
add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-130 (-130)
function old new delta
svm_set_segment_register 662 653 -9
svm_get_segment_register 409 288 -121
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
The MSR_BITMAP field is required to be page aligned. Also switch gpa to be a
uint64_t, as the MSR_BITMAP is strictly a 64bit VMCS field.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
Currently, the following sequence of actions:
* VMPTRLD (creates a mapping, likely pointing at gfn 0 for an empty vmcs)
* VMWRITE CPU_BASED_VM_EXEC_CONTROL (completed by hardware)
* VMWRITE MSR_BITMAP (completed by hardware)
* VMLAUNCH
results in an L2 guest running with ACTIVATE_MSR_BITMAP set, but Xen using a
stale mapping (likely gfn 0) when reading the interception bitmap. The
MSR_BITMAP field needs unconditionally intercepting even with VMCS shadowing,
so Xen's mapping of the bitmap can be updated.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Sergey Dyasli <sergey.dyasli@citrix.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
Rename vmx_check_msr_bitmap() to vmx_msr_is_intercepted() in order to more
clearly identify what the boolean return value means. Change the int
access_type to bool is_write.
The NULL pointer check is moved out, as it doesn't pertain to whether the MSR
is intercepted or not. The check is moved into nvmx_n2_vmexit_handler(),
where it becomes a hard error in the case that ACTIVATE_MSR_BITMAP is set.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
This avoids opencoding the bitmap bases in accessor functions. Introduce a
build_assertions() function to check the structure layout against the manual
definiton. In addition, drop some stale comments and ASSERT() that callers
pass an in-range MSR.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
xiliang
Wei Liu
Marek Marczykowski-Górecki
Rusty Bird
Yi Sun
Sergej Proskurin
Praveen Kumar
Jan Beulich
Andrii Anisov
Iurii Konovalenko
Olaf Hering
Petre Pircalabu
Julien Grall
Andrew Cooper