When the record length for sending the p2m frames in a migration
stream is too large, the issued error message is not very helpful:
xc: Record (0x00000003, x86 PV P2M frames) length 0x8 exceeds max
(0x800000): Internal error
When printing the error use the size which was tested instead that of
the record header length.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
The manual of xl says --clear option is supported and that option
worked for xm. Add that to xl now.
Signed-off-by: Xiao Liang <xiliang@redhat.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Do not setup vfb+vkb when no access method was configured. Then check if
qemu is really needed.
The only not configurable thing forcing qemu running in dom0 after this
change are consoles used to save/restore. But even in that case, there
is much smaller part of qemu exposed.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
This patch implements the xl/xc changes to support set CBM
for L2 CAT.
The new level option is introduced to original CAT setting
command in order to set CBM for specified level CAT.
- 'xl psr-cat-set' is updated to set cache capacity bitmasks(CBM)
for a domain according to input cache level.
root@:~$ xl psr-cat-set -l2 1 0x7f
root@:~$ xl psr-cat-show -l2 1
Socket ID : 0
Default CBM : 0xff
ID NAME CBM
1 ubuntu14 0x7f
Signed-off-by: He Chen <he.chen@linux.intel.com>
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
This patch implements changes in xl/xc changes to support
showing CBM of L2 CAT.
The new level option is introduced to original CAT showing
command in order to show CBM for specified level CAT.
- 'xl psr-cat-show' is updated to show CBM of a domain
according to input cache level.
Examples:
root@:~$ xl psr-cat-show -l2 1
Socket ID : 0
Default CBM : 0xff
ID NAME CBM
1 ubuntu14 0x7f
Signed-off-by: He Chen <he.chen@linux.intel.com>
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
This patch implements xl/xc changes to support get HW info
for L2 CAT.
'xl psr-hwinfo' is updated to show both L3 CAT and L2 CAT
info.
Example(on machine which only supports L2 CAT):
Cache Monitoring Technology (CMT):
Enabled : 0
Cache Allocation Technology (CAT): L2
Socket ID : 0
Maximum COS : 3
CBM length : 8
Default CBM : 0xff
Signed-off-by: He Chen <he.chen@linux.intel.com>
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Running "make uninstall" does not remove all installed files, a
situation which might cause link related issues if xen is re-installed
in a different location.
In order to make uninstall correctly remove the files it is best
the process should be done recursively by mirroring each "install"
target with an "uninstall" who removes the installed files.
An exception to this rule is uninstalling the files produced by
"qemu-xen-dir-remote" and "qemu-xen-traditional-dir", which are external
to the project. These projects do not implement an "uninstall" target so
the files have to be removed manually.
Signed-off-by: Petre Pircalabu <ppircalabu@bitdefender.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
If xc_gntshr_open failed the only thing to cleanup is free allocated
memory. So instead of calling libxenvchan_close (which assume
valid calculated buffers being mmaped already) free memory and return.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
The original code was added with the hope that PV superpage migration
might work. But it was never proven that the code actually worked.
Now that PV superpage is gone, simplify the code by returning error
immediately.
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
The amount of namespace resolution is unnecessarily large, as all code deals
in terms of struct segment_register. This removes the attr.fields part of all
references, and alters attr.bytes to just attr.
Three areas of code using initialisers for segment_register are tweaked to
compile with older versions of GCC. arch_set_info_hvm_guest() has its SEG()
macros altered to use plain comma-based initialisation, while
{rm,vm86}_{cs,ds}_attr are simplified to plain numbers which matches their
description in the manuals.
No functional change. (For some reason, the old {rm,vm86}_{cs,ds}_attr causes
GCC to create variable in .rodata, whereas the new code uses immediate
operands. As a result, vmx_{get,set}_segment_register() are slightly
shorter.)
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
There are no current users which I can locate. One piece of xend which didn't
move forwards into xl/libxl is this:
# Configure host CPUID consistency checks, which must be satisfied for this
# VM to be allowed to run on this host's processor type:
#cpuid_check=[ '1:ecx=xxxxxxxxxxxxxxxxxxxxxxxxxx1xxxxx' ]
# - Host must have VMX feature flag set
The implementation of xc_cpuid_check() is conceptually broken. Dom0's view of
CPUID is not the approprite view to check, and will be wrong in the presence
of CPUID masking/faulting, and for HVM-based toolstack domains.
If it turns out that the functionality is required, it should be implemented
in terms of XEN_SYSCTL_get_cpuid_policy to use the proper CPUID view.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Currently the default behaviour of the xenconsole client is to
ignore any input to stdin, unless stdin and stdout are both
ttys. The new option allows to manually overwrite this, causing the
client to forward input regardless.
Signed-off-by: Felix Schmoll <eggi.innovations@gmail.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
If option '-l' or '--lmce' is specified and the host supports LMCE,
xen-mceinj will inject LMCE to CPU specified by '-c' (or CPU0 if '-c'
is not present).
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Though XEN_MC_inject_v2 allows injecting MC# to specified CPUs, the
current xc_mca_op() does not use this feature and not provide an
interface to callers. This commit add a new xc_mca_op_inject_v2() that
receives a cpumap providing the set of target CPUs.
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
If LMCE is supported by host and ' mca_caps = [ "lmce" ] ' is present
in xl config, the LMCE capability will be exposed in guest MSR_IA32_MCG_CAP.
By default, LMCE is not exposed to guest so as to keep the backwards migration
compatibility.
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com> for hypervisor side
Acked-by: Wei Liu <wei.liu2@citrix.com>
When valid mmio_hole is set in hvm.cfg, segment fault happens at accessing
localents pointer.
Because the size of localents pointer isn't enough to store appended
mmio_hole_size parameter.
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
IGD passthrough couldn't work on Skylake and Kabylake, because their
Device ID aren't in fixup_ids[]. Currently we need to add every intel
graphic ID into fixup_ids[], it is hard to maintain.
This patch judge intel graphics through vendor id (0x8086) and class
code(0x030000), this could support both the old and new intel graphics,
and reduce maintain work in future.
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
No functional change. Just extract this function for next patch and avoid
code repetition.
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
As both xen-netfront and xen-blkfront support multi-queue, they would
consume a lot of grant table references when there are many paravirtual
devices and vcpus assigned to guest. Guest domU might panic or hang due to
grant allocation failure when nr_grant_frames in guest has reached its max
value.
This utility would help the administrators to diagnose xen issue. There is
only one command gnttab_query_size so far to monitor the guest grant table
frame usage on dom0 side so that it is not required to debug on guest
kernel side for crash/hang analysis anymore.
It is extensible for adding new commands for more diagnostic functions and
the framework of xen-diag.c is from xen-livepatch.c.
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
This patch adds new interface for GNTTABOP_query_size in libxc to help
query the current grant table frames and maximum grant table frames for a
specific domain.
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
We were trimming the history of commits only at the end of each
transaction (regardless of how it ended).
Therefore if non-transactional writes were being made but no
transactions were being ended, the history would grow
indefinitely. Now we trim the history at regular intervals.
Signed-off-by: Thomas Sanders <thomas.sanders@citrix.com>
The new function repeats the behavior of the first version
except it has an extended list of arguments which are subsequently
passed to mmap() call.
This is needed for QEMU depriviledging.
Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
This is result of parsing cpu_map.xml from libvirt.
The most important part is handling leaf 0x00000007, but while at it add
other bits too.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
If the default compiler silently defaults to to -fPIC/-fPIE building
rombios fails:
ld -melf_i386 -s -r 32bitbios.o tcgbios/tcgbiosext.o util.o pmm.o -o 32bitbios_all.o
There are undefined symbols in the BIOS:
U _GLOBAL_OFFSET_TABLE_
make[10]: *** [Makefile:26: 32bitbios_all.o] Error 11
Prevent the failure by enforcing non-PIC/PIE mode.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
CF reflects the last bit shifted out, i.e. can't possibly be derived
from the result value.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Instead of relying on cpuid instruction behaviour to tell which domain
type we are just try asking the kernel via the appropriate sysfs node
(added in Linux kernel 4.13).
Keep the old detection logic as a fallback for older kernels.
Signed-off-by: Juergen Gross <jgross@suse.com>
Add support for filtering out the write_ctrlreg monitor events if they
are generated only by changing certains bits.
A new parameter (bitmask) was added to the xc_monitor_write_ctrlreg
function in order to mask the event generation if the changed bits are
set.
Signed-off-by: Petre Pircalabu <ppircalabu@bitdefender.com>
Acked-by: Tamas K Lengyel <tamas@tklengyel.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
After rombios transfers the data for a write, it checks the status and
fails if BSY is set. qemu-trad doesn't set BSY for PIO writes, but QEMU
upstream does, and this causes rombios to fail writes because they are
marked as BSY. Instead, wait for BSY to clear after a write.
INT 13 writes are probably rarely used these days, but they are used by
GRUB 2 to write to its environment file which happens by default on
Ubuntu.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
GCC 7.1.1 complains that several buffers passed to snprintf() in xenpmd
and tools/ocmal/xc are too small to hold the largest possible resulting string,
which is calculated by adding up the maximum length of all the substrings.
The warnings are treated as errors by -Werror, and goes like this (abbreviated):
xenpmd.c:94:36: error: ‘%s’ directive output may be truncated writing up to
255 bytes into a region of size 13 [-Werror=format-truncation=]
#define BATTERY_INFO_FILE_PATH "/proc/acpi/battery/%s/info"
^
xenpmd.c:113:13: note: ‘snprintf’ output between 25 and 280 bytes into a
destination of size 32
xenpmd.c:95:37: error: ‘%s’ directive output may be truncated writing up to
255 bytes into a region of size 13 [-Werror=format-truncation=]
#define BATTERY_STATE_FILE_PATH "/proc/acpi/battery/%s/state"
^
xenpmd.c:116:13: note: ‘snprintf’ output between 26 and 281 bytes into a
destination of size 32
xenctrl_stubs.c:65:15: error: ‘%s’ directive output may be truncated writing
up to 1023 bytes into a region of size 252 [-Werror=format-truncation=]
"%d: %s: %s", error->code,
^~
xenctrl_stubs.c:64:4: note: ‘snprintf’ output 5 or more bytes (assuming 1028)
into a destination of size 256
Enlarge the size of these buffers as suggested by the complier
(and slightly rounded) to fix the warnings.
No functional changes.
Signed-off-by: Zhongze Liu <blackskygg@gmail.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Have the caller indicate its buffer size, provide a means to query the
needed size, don't ignore the upper halves of type code and instance,
and don't copy partial data.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
This fixes the python bindings, since symbols were missing in libxenstat.
xentop doesn't use any yajl functions, so drop linking libyajl.
Signed-off-by: Peter Große <pegro@friiks.de>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Avoid needless gaps. Make flags field mandatory for all three
operations (and rename it to fit the intended future purpose of
possibly holding more than just one flag).
Also correct a typo in a related domctl.h comment.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Julien Grall <julien.grall@arm.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
iptables has a system-wide lock on the xtables. Strangely though, in
the case of two concurrent invocations, the default is for the
instance not grabbing the lock to exit out rather than waiting for it.
This means that when starting a large number of guests in parallel,
many will fail out with messages like this:
2017-05-10 11:45:40 UTC libxl: error: libxl_exec.c:118: libxl_report_child_exitstatus: /etc/xen/scripts/vif-bridge remove [18767] exited with error status 4
2017-05-10 11:50:52 UTC libxl: error: libxl_exec.c:118: libxl_report_child_exitstatus: /etc/xen/scripts/vif-bridge offline [1554] exited with error status 4
In order to instruct iptables to wait for the lock, you have to
specify '-w'. Unfortunately, not all versions of iptables have the
'-w' option, so on first invocation check to see if it accepts the -w
command.
Reported-by: Antony Saba <awsaba@gmail.com>
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Release-acked-by: Julien Grall <julien.grall@arm.com>
xc_{get,set}_hvm_param() are deprecated because they truncate their value
parameter in 32bit builds of libxc, and are therefore unfit for use.
As there is only a single remaining user, switch that user over to
xc_hvm_param_get() and drop these functions completely.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Juergen Gross