During the review it was noticed that it would be better if internally
the claim_mode was held as an 'int' instead of a 'bool'. The reason
is that during the startup of xl, one has call the libxl_defbool_setdefault.
otherwise any usage of claim_mode would result in assert break.
The assert is due to the fact that using defbool without any set
values (either true of false) will cause it hit an assertion.
If we use an 'int' we don't have to worry about it and by default
the value of zero will suffice for checks whether the claim is
enabled or disabled.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
During the review of the patches it was noticed that there exists
a race wherein the 'free_memory' value consists of information from
two hypercalls. That is the XEN_SYSCTL_physinfo and XENMEM_get_outstanding_pages.
The free memory the host has available for guest is the difference between
the 'free_pages' (from XEN_SYSCTL_physinfo) and 'outstanding_pages'. As they
are two hypercalls many things can happen in between the execution of them.
This patch resolves this by eliminating the XENMEM_get_outstanding_pages
hypercall and providing the free_pages and outstanding_pages information
via the xc_phys_info structure.
It also removes the XSM hooks and adds locking as needed.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Reviewed-by: Tim Deegan <tim@xen.org>
Acked-by: Keir Fraser <keir.xen@gmail.com>
Otherwise, with arch_compat_vcpu_op() calling arch_do_vcpu_op() to
handle it, it results in -ENOSYS after 6ff9e4f7 ("xen: move
VCPUOP_register_vcpu_info to common code") for 32-bit x86 domains.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Keir Fraser <keir@xen.org>
- arm64: use V2M_GIC_BASE_ADDRESS
- only expose GIC_*_ADDRESS to assembly. The C code uses base addresses
provide by the device tree
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Use machine ID to know what is the current board. This value is only given
to the first CPU by the bootloader.
When the exynos 5 starts, there is only one CPU up. Xen needs to start the
secondary cpu. The latter boots in secure mode.
Theses modifications aim to be removed as soon as possible. It should
be moved either in a platform specific boot-wrapper (which will be start
before Xen), or in the bootloader (assuming U-Boot/Grub will support SMP).
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Add CONFIG_EARLY_PRINTK options in configs/arm{32,64}.mk to let the user
to choose if he wants to have early output, ie before the console is initialized.
This code is specific for each UART. When CONFIG_EARLY_PRINTK is enabled,
Xen will only be able to run on a board with this UART.
If a developper wants to add support for a new UART, he must implement the
following assembly macro/define:
- EALY_UART_BASE_ADDRESS: variable which contains the physical base address
for the UART
- early_uart_init: initialize the UART
- early_uart_ready: check and wait until the UART can transmit a new
character
- early_uart_transmit: transmit a character
For more details about the parameters of each function,
see arm{32,64}/debug-pl011.inc comments.
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
All calls to this function in ARM code have been removed. This function SHOULD
not be used. If someone calls this function, a linking error will occur.
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
All calls to this function in ARM code have been removed. This function SHOULD
not be used. If someone calls this function, a linking error will occur.
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Currently xen doesn't implement SYS MMU. When a device will talk with dom0
with DMA request the domain will use GFN instead of MFN.
For instance on the arndale board, without this patch the network doesn't
work.
The 1:1 mapping is a workaround and MUST be remove as soon as a SYS MMU is
implemented in XEN.
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Xen can include various platform support (ie: exynos5, versatile express...)
and choose during boot time a set of callbacks for the current board.
These callbacks will be called in places where each board can have specific
code. For the moment the callbacks are:
- platform_init: additional initialization for the platform
- platform_init_time: some platform (ie: Exynos 5) needs to initialize
the timer with an uncommon way
- platform_specific_mapping: add mapping to dom0 which are not specified
in the device tree
- platform_reset: reset the platform
- platform_poweroff: poweroff the platform
- platform_quirks: list of quirks for a specific board.
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
- gic_route_irq_to_guest takes a dt_irq instead of an IRQ number
- remove hardcoded address/IRQ
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Allow UART driver to retrieve all its information in the device tree.
It's possible to choose the pl011 driver via the Xen command line.
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
This generic UART will find the right UART via xen command line
with dtuart=myserial.
"myserial" is the alias of the UART in the device tree. Xen will retrieve
the information via the device tree and call the initialization function for
this specific UART thanks to the device API.
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Keir Fraser <keir@xen.org>
The existing function serial_irq doesn't allow to retrieve if the interrupt
is edge or level trigger.
Use this function to routes IRQs for all serial ports which Xen is using
to Xen.
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
- Define VGIC base address per domain. For the moment the base addresses
to dom0 base addresses.
- The number of interrupt lines (ie number of SPIs) is equal to:
* 0 for guests
* number of host SPIs for dom0
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
- Remove early parsing for GIC addresses
- Remove hard coded maintenance IRQ number
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
This function will replace request_irq in a later patch. It takes a dt_irq
as first argument instead of an unsigned int.
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
This function will replace setup_irq in later patch. It takes a dt_irq
as first argument instead of an unsigned int.
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
This function translates an interrupt specifier to an IRQ number and IRQ
type (ie: level trigger, edge trigger,...). It's GIC specific.
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
This function routes an IRQ to a specific cpu. The IRQ is retrieved via
the device tree.
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Add function to parse the device tree and create a hierarchical tree.
This code is based on drivers/of/base.c in linux source.
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Map physical range in virtual memory with a specific mapping attribute.
Also add new mapping attributes for ARM: PAGE_HYPERVISOR_NOCACHE
and PAGE_HYPERVISOR_WC.
This function replaces early_ioremap which is only able to deal with 2Mb
aligned mapping. Therefore, vmap initialization has been moved earlier.
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
ioremap function can unlikely return an unaligned virtual address if
the physical address itself is unaligned on a page size.
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Keir Fraser <keir@xen.org>
[ ijc -- include asm/page.h to fix build error on x86 ]
If there is a single colon for a given target and the target
is redefined in another place (e.g. in included file) then
make executes only new target and displays following warning:
Makefile:35: warning: overriding commands for target `clean'
tools/libfsimage/common/../../../tools/libfsimage/Rules.mk:25:
warning: ignoring old commands for target `clean'
To cope with that issue define all required targets as double-colon
rules. Additionally, remove some redundant stuff.
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
doc: buildsystem fixes
- use correct pathes (make gmake dist-docs from toplevel directory work)
- configure detects perl as tools/configure does
Signed-off-by: Christoph Egger <chegger@amazon.de>
Reviewed-by: Matthew Wilson <msw@amazon.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
[ ijc -- reran autogen.sh ]
gic_disable_cpu is only called with interrupt disabled.
Use spin_lock instead of spin_lock_irq and check the function is
called with interrupts disabled.
Signed-off-by: Julien Grall <julien.grall@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
On some setup, the first linux page table is at 0x40004000. Xen will load
dom0 device tree at 0x4000100. In case of the device tree is big, linux will
corrupt the device tree.
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
When debug is enabled in device tree code, some lines
are bigger than 80 characters.
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
As vpl011 UART is not initialized for dom 0, when the domain tries to access to
this range, a segfault will occur in Xen. The right behaviour should be a data
abort for the guest.
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Konrad Rzeszutek Wilk
Ian Campbell
Marek Marczykowski
Jan Beulich
Julien Grall
Anthony PERARD
Daniel Kiper
Christoph Egger
Julien Grall
George Dunlap