Enable build of generic functionality for working with device
tree for RISC-V.
Also, a collection of functions for parsing memory map and other
boot information from a device tree are available now.
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Enable GENERIC_BUG_FRAME to support BUG(), WARN(), ASSERT,
and run_in_exception_handler().
"UNIMP" is used for BUG_INSTR, which, when macros from <xen/bug.h>
are used, triggers an exception with the ILLEGAL_INSTRUCTION cause.
This instruction is encoded as a 2-byte instruction when
CONFIG_RISCV_ISA_C is enabled:
ffffffffc0046ba0: 0000 unimp
and is encoded as a 4-byte instruction when CONFIG_RISCV_ISA_C
ins't enabled:
ffffffffc005a460: c0001073 unimp
Using 'ebreak' as BUG_INSTR does not guarantee proper handling of macros
from <xen/bug.h>. If a debugger inserts a breakpoint (using the 'ebreak'
instruction) at a location where Xen already uses 'ebreak', it
creates ambiguity. Xen cannot distinguish whether the 'ebreak'
instruction is inserted by the debugger or is part of Xen's own code.
Remove BUG_INSN_32 and BUG_INSN_16 macros as they encode the ebreak
instruction, which is no longer used for BUG_INSN.
Update the comment above the definition of INS_LENGTH_MASK as instead of
'ebreak' instruction 'unimp' instruction is used.
<xen/lib.h> is included for the reason that panic() and printk() are
used in common/bug.c and RISC-V fails if it is not included.
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Use array_access_nospec() to prevent guest speculation.
Avoid double access of trap_causes[cause].
Suggested-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Note that trap_init() isn't declared with the __init attribute to
avoid removing __init when multi-CPU support for Xen is added.
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
As common code is available it is better to use printk() instead
of early_printk().
Also the printing of "Hello from RISC-V world" is dropped as
it is useless and "All set up is enough".
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Address compilation error on bullseye-riscv64 container:
undefined reference to `guest_physmap_remove_page`
Since there is no current implementation of `guest_physmap_remove_page()`,
a stub function has been added.
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
constant_test_bit() is functionally the same as generic_test_bit(),
so constant_test_bit() can be dropped and replaced with
generic_test_bit().
Requested-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Taken from Linux-6.4.0-rc1
Xen's bitops.h consists of several Linux's headers:
* linux/arch/include/asm/bitops.h:
* The following function were removed as they aren't used in Xen:
* test_and_set_bit_lock
* clear_bit_unlock
* __clear_bit_unlock
* The following functions were renamed in the way how they are
used by common code:
* __test_and_set_bit
* __test_and_clear_bit
* The declaration and implementation of the following functios
were updated to make Xen build happy:
* clear_bit
* set_bit
* __test_and_clear_bit
* __test_and_set_bit
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
The following generic functions were introduced:
* test_bit
* generic__test_and_set_bit
* generic__test_and_clear_bit
* generic__test_and_change_bit
These functions and macros can be useful for architectures
that don't have corresponding arch-specific instructions.
Also, the patch introduces the following generics which are
used by the functions mentioned above:
* BITOP_BITS_PER_WORD
* BITOP_MASK
* BITOP_WORD
* BITOP_TYPE
The following approach was chosen for generic*() and arch*() bit
operation functions:
If the bit operation function that is going to be generic starts
with the prefix "__", then the corresponding generic/arch function
will also contain the "__" prefix. For example:
* test_bit() will be defined using arch_test_bit() and
generic_test_bit().
* __test_and_set_bit() will be defined using
arch__test_and_set_bit() and generic__test_and_set_bit().
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Michal Orzel <michal.orzel@amd.com>
RISC-V does a conditional toolchain for the Zbb extension
(xen/arch/riscv/rules.mk), but unconditionally uses the
ANDN instruction in emulate_xchg_1_2().
Fixes: 51dabd6312 ("xen/riscv: introduce cmpxchg.h")
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Suggested-By: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Support for specifying "raw" insns was added only in 2.38.
To support older version it would be better switch to .insn
with operands.
The following compilation error occurs:
./arch/riscv/include/asm/processor.h: Assembler messages:
./arch/riscv/include/asm/processor.h:70: Error: unrecognized opcode `0x0100000F'
In case of the following Binutils:
$ riscv64-linux-gnu-as --version
GNU assembler (GNU Binutils for Debian) 2.35.2
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Suggested-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Release-Acked-By: Oleksii Kurochko <oleksii.kurochko@gmail.com>
This is most easily done together because of how arm32 is currently
structured, but it does just mirror the existing ffs()/ffsl() work.
Introduce compile and boot time testing.
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Release-acked-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Disable unnecessary configs for two cases:
1. By utilizing EXTRA_FIXED_RANDCONFIG for randconfig builds (GitLab CI jobs).
2. By using tiny64_defconfig for non-randconfig builds.
Only configs which lead to compilation issues were disabled.
Remove lines related to disablement of configs which aren't affected
compilation:
-# CONFIG_SCHED_CREDIT is not set
-# CONFIG_SCHED_RTDS is not set
-# CONFIG_SCHED_NULL is not set
-# CONFIG_SCHED_ARINC653 is not set
-# CONFIG_TRACEBUFFER is not set
-# CONFIG_HYPFS is not set
-# CONFIG_SPECULATIVE_HARDEN_ARRAY is not set
Update argo.c to include asm/p2m.h directly, rather than on a transitive
dependency through asm/domain.h Update asm/p2m.h to include xen/errno.h,
rather than rely on it having included already.
CONFIG_XSM=n as it requires an introduction of:
* boot_module_find_by_kind()
* BOOTMOD_XSM
* struct bootmodule
* copy_from_paddr()
The mentioned things aren't introduced now.
CONFIG_BOOT_TIME_CPUPOOLS requires an introduction of cpu_physical_id() and
acpi_disabled, so it is disabled for now.
PERF_COUNTERS requires asm/perf.h and asm/perfc-defn.h, so it is
also disabled for now, as RISC-V hasn't introduced this headers yet.
LIVEPATCH isn't ready for RISC-V too and it can be overriden by randconfig,
so to avoid compilation errors for randconfig it is disabled for now.
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
[Fix up common/argo.c rather than inserting a transitive dependency]
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Initially the patch was introduced by Bobby, who takes the header from
Linux kernel.
The following changes were done on top of Bobby's changes:
- atomic##prefix##_*xchg_*(atomic##prefix##_t *v, c_t n) were updated
to use__*xchg_generic()
- drop casts in write_atomic() as they are unnecessary
- drop introduction of WRITE_ONCE() and READ_ONCE().
Xen provides ACCESS_ONCE()
- remove zero-length array access in read_atomic()
- drop defines similar to pattern:
#define atomic_add_return_relaxed atomic_add_return_relaxed
- move not RISC-V specific functions to asm-generic/atomics-ops.h
- drop atomic##prefix##_{cmp}xchg_{release, aquire, release}() as they
are not used in Xen.
- update the defintion of atomic##prefix##_{cmp}xchg according to
{cmp}xchg() implementation in Xen.
- some ATOMIC_OP() macros were updated:
- drop size argument for ATOMIC_OP which defines atomic##prefix##_xchg()
and atomic##prefix##_cmpxchg().
- drop c_op argument for ATOMIC_OPS which defines ATOMIC_OPS(and, and),
ATOMIC_OPS( or, or), ATOMIC_OPS(xor, xor), ATOMIC_OPS(add, add, +),
ATOMIC_OPS(sub, add, -) as c_op is always "+" for them.
- drop "" from definition of __atomic_{acquire/release"}_fence.
The current implementation is the same with 8e86f0b409a4
("arm64: atomics: fix use of acquire + release for full barrier
semantics") [1].
RISC-V could combine acquire and release into the SC
instructions and it could reduce a fence instruction to gain better
performance. Here is related description from RISC-V ISA 10.2
Load-Reserved/Store-Conditional Instructions:
- .aq: The LR/SC sequence can be given acquire semantics by
setting the aq bit on the LR instruction.
- .rl: The LR/SC sequence can be given release semantics by
setting the rl bit on the SC instruction.
- .aqrl: Setting the aq bit on the LR instruction, and setting
both the aq and the rl bit on the SC instruction makes
the LR/SC sequence sequentially consistent, meaning that
it cannot be reordered with earlier or later memory
operations from the same hart.
Software should not set the rl bit on an LR instruction unless
the aq bit is also set, nor should software set the aq bit on an
SC instruction unless the rl bit is also set. LR.rl and SC.aq
instructions are not guaranteed to provide any stronger ordering
than those with both bits clear, but may result in lower
performance.
Also, I way of transforming ".rl + full barrier" to ".aqrl" was approved
by (the author of the RVWMO spec) [2]
[1] https://patchwork.kernel.org/project/linux-arm-kernel/patch/1391516953-14541-1-git-send-email-will.deacon@arm.com/
[2] https://lore.kernel.org/linux-riscv/41e01514-74ca-84f2-f5cc-2645c444fd8e@nvidia.com/
Signed-off-by: Bobby Eshleman <bobbyeshleman@gmail.com>
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
The header was taken from Linux kernl 6.4.0-rc1.
Addionally, were updated:
* add emulation of {cmp}xchg for 1/2 byte types using 32-bit atomic
access.
* replace tabs with spaces
* replace __* variale with *__
* introduce generic version of xchg_* and cmpxchg_*.
* drop {cmp}xchg{release,relaxed,acquire} as Xen doesn't use them
* drop barries and use instruction suffixices instead ( .aq, .rl, .aqrl )
Implementation of 4- and 8-byte cases were updated according to the spec:
```
....
Linux Construct RVWMO AMO Mapping
...
atomic <op> amo<op>.{w|d}.aqrl
Linux Construct RVWMO LR/SC Mapping
...
atomic <op> loop: lr.{w|d}.aq; <op>; sc.{w|d}.aqrl; bnez loop
Table A.5: Mappings from Linux memory primitives to RISC-V primitives
```
The current implementation is the same with 8e86f0b409a4
("arm64: atomics: fix use of acquire + release for full barrier
semantics") [1].
RISC-V could combine acquire and release into the SC
instructions and it could reduce a fence instruction to gain better
performance. Here is related description from RISC-V ISA 10.2
Load-Reserved/Store-Conditional Instructions:
- .aq: The LR/SC sequence can be given acquire semantics by
setting the aq bit on the LR instruction.
- .rl: The LR/SC sequence can be given release semantics by
setting the rl bit on the SC instruction.
- .aqrl: Setting the aq bit on the LR instruction, and setting
both the aq and the rl bit on the SC instruction makes
the LR/SC sequence sequentially consistent, meaning that
it cannot be reordered with earlier or later memory
operations from the same hart.
Software should not set the rl bit on an LR instruction unless
the aq bit is also set, nor should software set the aq bit on an
SC instruction unless the rl bit is also set. LR.rl and SC.aq
instructions are not guaranteed to provide any stronger ordering
than those with both bits clear, but may result in lower
performance.
Also, I way of transforming ".rl + full barrier" to ".aqrl" was approved
by (the author of the RVWMO spec) [2]
[1] https://patchwork.kernel.org/project/linux-arm-kernel/patch/1391516953-14541-1-git-send-email-will.deacon@arm.com/
[2] https://lore.kernel.org/linux-riscv/41e01514-74ca-84f2-f5cc-2645c444fd8e@nvidia.com/
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
The mentioned macros exist only because of Linux compatible purpose.
The patch defines __ffs() in terms of Xen bitops and it is safe
to define in this way ( as __ffs() - 1 ) as considering that __ffs()
was defined as __builtin_ctzl(x), which has undefined behavior when x=0,
so it is assumed that such cases are not encountered in the current code.
To not include <xen/linux-compat.h> to Xen library files __ffs() and __ffz()
were defined locally in find-next-bit.c.
Except __ffs() usage in find-next-bit.c only one usage of __ffs() leave
in smmu-v3.c. It seems that it __ffs can be changed to ffsl(x)-1 in
this file, but to keep smmu-v3.c looks close to linux it was deciced just
to define __ffs() in xen/linux-compat.h and include it in smmu-v3.c
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Acked-by: Shawn Anastasio <sanastasio@raptorengineering.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Michal Orzel <michal.orzel@amd.com>
Acked-by: Rahul Singh <rahul.singh@arm.com>
Now, the check-extension() macro has 1 argument instead of 2.
This change helps to reduce redundancy around usage of extensions
name (in the case of the zbb extension, the name was used 3 times).
To implement this, a new variable was introduced:
<extension name>-insn
which represents the instruction support that is being checked.
Additionally, zbb-insn is updated to use $(comma) instead of ",".
Suggested-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Update the argument of the as-insn for the Zbb case to verify that
Zbb is supported not only by a compiler, but also by an assembler.
Also, check-extenstion(ext_name, "insn") helper macro is introduced
to check whether extension is supported by a compiler and an assembler.
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
The header taken form Linux 6.4.0-rc1 and is based on
arch/riscv/include/asm/mmio.h with the following changes:
- drop forcing of endianess for read*(), write*() functions as
no matter what CPU endianness, what endianness a particular device
(and hence its MMIO region(s)) is using is entirely independent.
Hence conversion, where necessary, needs to occur at a layer up.
Another one reason to drop endianess conversion here is:
https://patchwork.kernel.org/project/linux-riscv/patch/20190411115623.5749-3-hch@lst.de/
One of the answers of the author of the commit:
And we don't know if Linux will be around if that ever changes.
The point is:
a) the current RISC-V spec is LE only
b) the current linux port is LE only except for this little bit
There is no point in leaving just this bitrotting code around. It
just confuses developers, (very very slightly) slows down compiles
and will bitrot. It also won't be any significant help to a future
developer down the road doing a hypothetical BE RISC-V Linux port.
- drop unused argument of __io_ar() macros.
- drop "#define _raw_{read,write}{b,w,l,d,q} _raw_{read,write}{b,w,l,d,q}"
as they are unnecessary.
- Adopt the Xen code style for this header, considering that significant changes
are not anticipated in the future.
In the event of any issues, adapting them to Xen style should be easily
manageable.
- drop unnecessary __r variables in macros read*_cpu()
- update inline assembler constraints for addr argument for
__raw_read{b,w,l,q} and __raw_write{b,w,l,q} to tell a compiler that
*addr will be accessed.
- add stubs for __raw_readq() and __raw_writeq() for RISCV_32
Addionally, to the header was added definions of ioremap_*().
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Currently, RISC-V requires two extensions: _zbb and _zihintpause.
This patch introduces a compiler check to check if these extensions
are supported.
Additionally, it introduces the riscv/booting.txt file, which contains
information about the extensions that should be supported by the platform.
In the future, a feature will be introduced to check whether an extension
is supported at runtime.
However, this feature requires functionality for parsing device tree
source (DTS), which is not yet available.
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
The cpu_relax() function, introduced in this commit, is anticipated to
support _zihintpause by the CPU.
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
ifdefing inclusion of <asm/mem_access.h> in <xen/mem_access.h>
allows to avoid generation of empty <asm/mem_access.h> header
for the case when !CONFIG_MEM_ACCESS.
For Arm it was explicitly added inclusion of <asm/mem_access.h> for p2m.c
and traps.c because they require some functions from <asm/mem_access.h> which
aren't available in case of !CONFIG_MEM_ACCESS.
Suggested-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Acked-by: Tamas K Lengyel <tamas@tklengyel.com>
Acked-by: Julien Grall <jgrall@amazon.com>
Acked-by: Shawn Anastasio <sanastasio@raptorengineering.com>
The header is shared between several archs so it is
moved to asm-generic.
Switch partly Arm and PPC to asm-generic/monitor.h and only
arch_monitor_get_capabilities() left in arch-specific/monitor.h.
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Tamas K Lengyel <tamas@tklengyel.com>
Acked-by: Julien Grall <jgrall@amazon.com>
Acked-by: Shawn Anastasio <sanastasio@raptorengineering.com>
From the unpriviliged doc:
No standard hints are presently defined.
We anticipate standard hints to eventually include memory-system spatial
and temporal locality hints, branch prediction hints, thread-scheduling
hints, security tags, and instrumentation flags for simulation/emulation.
Also, there are no speculation execution barriers.
Therefore, functions evaluate_nospec() and block_speculation() should
remain empty until a specific platform has an extension to deal with
speculation execution.
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
find-next-bit.c is common for Arm64, PPC and RISCV64,
so it is moved to xen/lib.
PPC has been transitioned to generic functions from find-next-bit.c
since it now shares the same implementation as the PPC-specific code.
The MISRA exclude list has been updated to verify
lib/find-next-bit.c instead of Arm's find_next_bit.c,
as Arm's find_next_bit.c has been relocated to xen/lib/.
Despite CONFIG_GENERIC_FIND_FIRST_BIT not currently being used in
Xen and being removed from the Linux kernel [1], it could theoretically
prove useful for Xen. This is because the Linux kernel transitioned
Arm to the generic version of find_first_bit() and
find_first_zero_bit() due to improvements [1] in both performance
and .text size.
It would be prudent to investigate whether [1] is applicable to Xen
as well and, if so, implement the necessary changes in a separate patch.
[1] https://lore.kernel.org/linux-arch/20211005054059.475634-5-yury.norov@gmail.com/
Suggested-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Shawn Anastasio <sanastasio@raptorengineering.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
Move the macros mentioned in the commit subject to their appropriate
locations.
Additionally, eliminate the dependency of xen/lib.h from xen/bug.h and
include "xen/bug.h" in files where xen/bug.h macros are utilized.
Most of the changes were made because a file requires macros from xen/bug.h,
except for some files for Arm which require definitions of BUG_OPCODE,
BUG_INSTR, BUG_FN_REG.
xen/lib.h was added to list-sort.c ( otherwise compilation errors related
to {d}printk occur during compilation of list-sort.c. ) as xen/lib.h was
removed from xen/list.h. Since nothing in xen/list.h depends on xen/lib.h
functionality and only xen/bug.h is needed.
cpufeature.h requires the inclusion of <xen/cache.h>;
otherwise, the following error will occur:
ld: common/monitor.o:/build/xen/./arch/x86/include/asm/cpufeature.h:41:
multiple definitions of `__cacheline_aligned';
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Julien Grall <jgrall@amazon.com>
Acked-by: Daniel P. Smith <dpsmith@apertussolutions.com>
Some headers are the same as asm-generic verions of them
so use them instead of arch-specific headers.
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
The 'struct dev_archdata' is exclusively used within 'struct device',
so it could be merged into 'struct device.'
After the merger, it is necessary to update the 'dev_archdata()'
macros and the comments above 'struct arm_smmu_xen_device' in
drivers/passthrough/arm/smmu.c.
Additionally, it is required to update instances of
"dev->archdata->iommu" to "dev->iommu".
Suggested-by: Julien Grall <julien@xen.org>
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
The following changes were done as a result of switching to
asm-generic/device.h:
* DEVICE_GIC was renamed to DEVICE_INTERRUPT_CONTROLLER according
to definition of enum device_class in asm-generic/device.h.
* acpi-related things in Arm code were guarded by #ifdef CONFIG_ACPI
as struct acpi_device_desc was guarded in asm-generic, also functions
acpi_device_init() was guarded too as they are using structure
acpi_device_desc inside.
* drop arm/include/asm/device.h and update arm/include/asm/Makefile
to use asm-generic/device.h instead.
As 'struct device_desc' is protected by CONFIG_HAS_DEVICE_TREE,
_sdevice, _edevice, device_init(), and device_get_class should also be
protected.
However, this protection was not implemented because Arm always has
CONFIG_HAS_DEVICE_TREE=y at the moment.
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
Arm, PPC and RISC-V introduce the same things in asm/device.h, so
generic device.h was introduced.
Arm's device.h was taken as a base with the following changes:
- #ifdef ACPI related things.
- Rename #ifdef guards.
- Add SPDX tag.
- #ifdef CONFIG_HAS_DEVICE_TREE related things.
- #ifdef-ing iommu related things with CONFIG_HAS_PASSTHROUGH.
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Julien Grall <jgrall@amazon.com>
Also, the patch adds some helpful macros that assist in avoiding
the redefinition of memory layout for each MMU mode.
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
asm/iommu.h shouldn't need to be included when CONFIG_HAS_PASSTHROUGH
isn't enabled.
As <asm/iommu.h> is ifdef-ed by CONFIG_HAS_PASSTHROUGH it should
be also ifdef-ed field "struct arch_iommu arch" in struct domain_iommu
as definition of arch_iommu is located in <asm/iommu.h>.
These amount of changes are just enough to avoid generation of empty
asm/iommu.h for now.
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
All necessary dummiy implementation of functions in this header
will be introduced in stubs.c
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Ifdef-ing inclusion of <asm/grant_table.h> allows to avoid
generation of empty <asm/grant_table.h> for cases when
CONFIG_GRANT_TABLE is not enabled.
The following changes were done for Arm:
<asm/grant_table.h> should be included directly because it contains
gnttab_dom0_frames() macros which is unique for Arm and is used in
arch/arm/domain_build.c.
<asm/grant_table.h> is #ifdef-ed with CONFIG_GRANT_TABLE in
<xen/grant_table.h> so in case of !CONFIG_GRANT_TABLE gnttab_dom0_frames
won't be available for use in arch/arm/domain_build.c.
Suggested-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Acked-by: Julien Grall <jgrall@amazon.com>
Acked-by: Shawn Anastasio <sanastasio@raptorengineering.com>
All archs have the do_div implementation for BITS_PER_LONG == 64
so do_div64.h is moved to asm-generic.
x86 and PPC were switched to asm-generic version of div64.h.
Arm was switched partly because Arm has different implementation
for 32-bits.
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Shawn Anastasio <sanastasio@raptorengineering.com>
Acked-by: Julien Grall <jgrall@amazon.com>
The following issue occurs on RISC-V platforms:
drivers/char/serial.c: In function 'serial_tx_interrupt':
drivers/char/serial.c:88:9: error: implicit declaration of function 'cpu_relax' [-Werror=implicit-function-declaration]
88 | cpu_relax();
cpu_relax() is defined in <asm/processor.h> so it was added
an inclusion of the header to serial.c.
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
The patch introduces generic percpu.h which was based on Arm's version
with the following changes:
* makes __per_cpu_data_end[] constant
* introduce get_per_cpu_offset() for macros this_cpu() and this_cpu_ptr()
* add inclustion of <asm/current.h> as get_per_cpu_offset() is located there.
Also it was changed a place where <asm/percpu.h> is included in <xen/percpu.h>
because asm-generic version of percpu.h started to include <asm/current.h> which
requires definition of DECLARE_PER_CPU.
As well the patch switches Arm, PPC and x86 architectures to use asm-generic
version of percpu.h.
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Acked-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Shawn Anastasio <sanastasio@raptorengineering.com>
iocap.h is common for Arm, PPC and RISC-V architectures thereby
it was moved to asm-generic.
Also Arm and PPC were switched to asm-generic version of iocap.h.
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Julien Grall <jgrall@amazon.com>
Acked-by: Shawn Anastasio <sanastasio@raptorengineering.com>
The patch introduces generic paging.h header for Arm, PPC and
RISC-V.
All mentioned above architectures use hardware virt extensions
and hardware pagetable extensions thereby it makes sense to set
paging_mode_translate and paging_mode_external by default.
Also in this patch Arm and PPC architectures are switched to
generic paging.h header.
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Julien Grall <jgrall@amazon.com>
Acked-by: Shawn Anastasio <sanastasio@raptorengineering.com>
<asm/delay.h> only declares udelay() function so udelay()
declaration was moved to xen/delay.h.
For x86, __udelay() was renamed to udelay() and removed
inclusion of <asm/delay.h> in x86 code.
For ppc, udelay() stub definition was moved to ppc/stubs.c.
Suggested-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Julien Grall <jgrall@amazon.com>
Acked-by: Shawn Anastasio <sanastasio@raptorengineering.com>
Platforms which doesn't have HAS_PCI enabled it is needed to
have <asm/pci.h>, which contains only an empty definition of
struct arch_pci_dev (except Arm, it introduces several Arm-specific
functions ).
Also, for architectures (such as PPC or RISC-V) on initial
stages of adding support, it is needed to generate <asm/pci.h>
for only define the mentioned above arch_pci_dev structure.
For the Arm-only stubs (mentioned in <asm/pci.h> for disabled
HAS_PCI and Arm-specific) will be needed
to add <asm/pci.h> directly alongside <xen/pci.h>. Only to
<arm/domain.c> <asm/pci.h> was added.
Suggested-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Julien Grall <jgrall@amazon.com>
The way how switch to virtual address was implemented in the
commit e66003e7be ("xen/riscv: introduce setup_initial_pages")
isn't safe enough as:
* enable_mmu() depends on hooking all exceptions
and pagefault.
* Any exception other than pagefault, or not taking a pagefault
causes it to malfunction, which means you will fail to boot
depending on where Xen was loaded into memory.
Instead of the proposed way of switching to virtual addresses was
decided to use identity mapping for area which constains needed code
to switch from identity mapping and after switching to virtual addresses,
identity mapping is removed from page-tables in the following way:
search for top-most page table entry and remove it.
Fixes: e66003e7be ("xen/riscv: introduce setup_initial_pages")
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
The function was introduced to calculate and save physical
offset before MMU is enabled because access to start() is
PC-relative and in case of linker_addr != load_addr it will
result in incorrect value in phys_offset.
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
asm/vm_event.h is common for ARM and RISC-V so it will be moved to
asm-generic dir.
Original asm/vm_event.h from ARM was updated:
* use SPDX-License-Identifier.
* update comment messages of stubs.
* update #ifdef
* instead of "include <public/domctl.h>" -> "public/vm_event.h"
As vm_event.h was moved to asm-generic then it is needed to create
Makefile in arm/include/asm/ and add generated-y += vm_event.h to
it.
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Acked-by: Tamas K Lengyel <tamas@tklengyel.com>
Some headers are shared between individual architectures or are empty.
To avoid duplication of these headers, asm-generic is introduced.
With the following patch, an architecture uses generic headers
mentioned in the file arch/$(ARCH)/include/asm/Makefile
To use a generic header is needed to add to
arch/$(ARCH)/include/asm/Makefile :
generic-y += <name-of-header-file.h>
For each mentioned header in arch/$(ARCH)/include/asm/Makefile,
the necessary wrapper in arch/$(ARCH)/include/generated/asm will be
generated.
As the base Makefile.asm-generic from Linux kernel was taken.
( 06c2afb862f9da8 "Linux 6.5-rc1" ).
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
The patch introdcuces printk related stuff which should be deleted
after Xen common code will be available.
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
The reason for reset_stack() introduction is that stack should be
reset twice:
1. Before jumping to C world at the start of _start() function.
2. After jumping from 1:1 mapping world.
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Sometimes variables are located in .sbss section but it won't
be mapped after MMU will be enabled.
To avoid MMU failures .sbss should be mapped
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
After introduction of initial pagetables there is no any sense
in dummy_bss variable as bss section will not be empty anymore.
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Acked-by: Bobby Eshleman <bobbyeshleman@gmail.com>
The patch does two thing:
1. Setup initial pagetables.
2. Enable MMU which end up with code in
cont_after_mmu_is_enabled()
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Acked-by: Bobby Eshleman <bobbyeshleman@gmail.com>
bss clear cycle requires proper alignment of __bss_start.
ALIGN(PAGE_SIZE) before "*(.bss.page_aligned)" in xen.lds.S
was removed as any contribution to "*(.bss.page_aligned)" have to
specify proper aligntment themselves.
Fixes: cfa0409f7c ("xen/riscv: initialize .bss section")
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Bobby Eshleman <bobbyeshleman@gmail.com>
The idea was taken from xvisor but the following changes
were done:
* Use only a minimal part of the code enough to enable MMU
* rename {_}setup_initial_pagetables functions
* add an argument for setup_initial_mapping to have
an opportunity to make set PTE flags.
* update setup_initial_pagetables function to map sections
with correct PTE flags.
* Rewrite enable_mmu() to C.
* map linker addresses range to load addresses range without
1:1 mapping. It will be 1:1 only in case when
load_start_addr is equal to linker_start_addr.
* add safety checks such as:
* Xen size is less than page size
* linker addresses range doesn't overlap load addresses
range
* Rework macros {THIRD,SECOND,FIRST,ZEROETH}_{SHIFT,MASK}
* change PTE_LEAF_DEFAULT to RW instead of RWX.
* Remove phys_offset as it is not used now
* Remove alignment of {map, pa}_start &= XEN_PT_LEVEL_MAP_MASK(0);
in setup_inital_mapping() as they should be already aligned.
Make a check that {map_pa}_start are aligned.
* Remove clear_pagetables() as initial pagetables will be
zeroed during bss initialization
* Remove __attribute__((section(".entry")) for setup_initial_pagetables()
as there is no such section in xen.lds.S
* Update the argument of pte_is_valid() to "const pte_t *p"
* Add check that Xen's load address is aligned at 4k boundary
* Refactor setup_initial_pagetables() so it is mapping linker
address range to load address range. After setup needed
permissions for specific section ( such as .text, .rodata, etc )
otherwise RW permission will be set by default.
* Add function to check that requested SATP_MODE is supported
Origin: git@github.com:xvisor/xvisor.git 9be2fdd7
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Bobby Eshleman <bobbyeshleman@gmail.com>
The GOT sections usage should be avoided in the hypervisor
so to catch such use cases earlier when GOT things are
produced the patch introduces .got and .got.plt sections
and adds asserts that they're empty.
The sections won't be created until they remain
empty otherwise the asserts would cause early failure.
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
The patch is needed to keep all address of cpu0_boot_stack
PC-relative.
Pseudoinstruction 'la' can be transformed to 'auipc/addi' or
'auipc/l{w|d}'. It depends on the .option directive: nopic and pic
or compiler flags.
Right now, 'la' transforms to 'auipc/l{w|d}', which in case of
cpu0_boot_stack[] will lead to the usage of _GLOBAL_OFFSET_TABLE_
where all addresses will be without counting that it might happen
that linker address != load address ( so addresses inside got
sections will be relative to linker time ).
It happens becuase the compiler from riscv64 docker compiled with
--enable-default-pie:
[user@49295ae49cbe build]$ riscv64-linux-gnu-gcc -v
Using built-in specs.
COLLECT_GCC=riscv64-linux-gnu-gcc
COLLECT_LTO_WRAPPER=/usr/lib/gcc/riscv64-linux-gnu/12.2.0/lto-wrapper
Target: riscv64-linux-gnu
Configured with: /build/riscv64-linux-gnu-gcc/src/gcc-12.2.0/configure
--prefix=/usr --program-prefix=riscv64-linux-gnu- --with-local-
prefix=/usr/riscv64-linux-gnu --with-sysroot=/usr/riscv64-linux-gnu --
with-build-sysroot=/usr/riscv64-linux-gnu --libdir=/usr/lib --
libexecdir=/usr/lib --target=riscv64-linux-gnu --host=x86_64-pc-linux-
gnu --build=x86_64-pc-linux-gnu --with-system-zlib --with-isl --with-
linker-hash-style=gnu --disable-nls --disable-libunwind-exceptions --
disable-libstdcxx-pch --disable-libssp --disable-multilib --disable-
werror --enable-languages=c,c++ --enable-shared --enable-threads=posix
--enable-__cxa_atexit --enable-clocale=gnu --enable-gnu-unique-object -
-enable-linker-build-id --enable-lto --enable-plugin --enable-install-
libiberty --enable-gnu-indirect-function --enable-default-pie --enable-
checking=release
Thread model: posix
Supported LTO compression algorithms: zlib zstd
gcc version 12.2.0 (GCC)
Looking at gcc spec file for the RISC-V architecture:
[user@49295ae49cbe build]$ riscv64-linux-gnu-gcc -dumpspecs | grep -i
pic
--traditional-format %(subtarget_asm_debugging_spec) %{fno-pie|fno-
PIE|fno-pic|fno-PIC:;:-fpic} %{march=*} %{mabi=*} %{mno-relax} %{mbig-
endian} %{mlittle-endian} %(subtarget_asm_spec)%{misa-spec=*}
which means that -fpic is enabled if none of the following options are
present on the command line:
-fno-pie
-fno-PIE
-fno-pic
-fno-PIC
That's the reasons why 'la' is transformed to 'aupic/l{w|d} GOT' and
not be dependent on the toolchain used.
Suggested-by: Jan Beulich <jbeulich@suse.com>
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
The following changes were made:
* Make GENERIC_BUG_FRAME mandatory for X86
* Update asm/bug.h using generic implementation in <xen/bug.h>
* Update do_invalid_op using generic do_bug_frame()
* Define BUG_DEBUGGER_TRAP_FATAL to debugger_trap_fatal(X86_EXC_GP,regs)
* type of eip variable was changed to 'const void *'
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
The idea of the patch is to change all <asm/bug.h> to <xen/bug.h> and
keep Xen compilable with adding only minimal amount of changes:
1. It was added "#include <xen/types.h>" to ARM's "<asm/bug.h>" as it
uses uint_{16,32}t in 'struct bug_frame'.
2. It was added '#define BUG_FRAME_STRUCT' which means that ARM hasn't
been switched to generic implementation yet.
3. It was added '#define BUG_FRAME_STRUCT' which means that x86 hasn't
been switched to generic implementation yet.
4. BUGFRAME_* and _start_bug_frame[], _stop_bug_frame_*[] were removed
for ARM & x86 to deal with compilation errors such as:
redundant redeclaration of ...
5. Remove BUG_DISP_WIDTH, BUG_LINE_LO_WIDTH, BUG_LINE_HI_WIDTH from
x86's <asm.bug.h> to not to produce #undef for them and #define again
with the same values as in <xen/bug.h>. These #undef and #define will
be anyway removed in the patch [2]
6. Remove <asm/bug.h> from <x86/acpi/cpufreq/cpufreq.c> and
<drivers/cpufreq/cpufreq.c> as nothing from <xen/bug.h> are used in
<*/cpufreq.c>
In the following two patches x86 and ARM archictectures will be
switched fully:
[1] xen/arm: switch ARM to use generic implementation of bug.h
[2] xen/x86: switch x86 to use generic implemetation of bug.h
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Julien Grall <jgrall@amazon.com>
The following defines BUG_DISP_WIDTH, BUG_LINE_LO_WIDTH,
BUG_LINE_HI_WIDTH aren't used in ARM so could be purged
as unused.
Requested-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Julien Grall <jgrall@amazon.com>
Oleksii Kurochko