The include of asm/cpuid.h in spec_ctrl.c was an artefact of an older version
of c/s 3860d5534d, and is not used in its current incarnation.
Fix a typo in a comment.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
* Initialise all spinlock fields together
* No need for an atomic set_bit() to initialise domid_bitmap
* Avoid using partial-line printk()'s.
* Style fixes (too many, and too few spaces)
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
On Intel hardware there's currently no translation of already enabled
IO-APIC pins when interrupt remapping is enabled on the IOMMU, hence
introduce a logic similar to the one used in x2apic_bsp_setup in order
to save and mask all IO-APIC pins, and then translate and restore them
after interrupt remapping has been enabled.
With this change the AMD specific logic to deal with enabled pins
(amd_iommu_setup_ioapic_remapping) can be removed, thus unifying the
handling of IO-APIC when enabling interrupt remapping regardless of
the IOMMU vendor.
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
When interrupt remapping is enabled as part of enabling x2APIC the
IO-APIC entries also need to be translated to the new format and added
to the interrupt remapping table.
This prevents IOMMU interrupt remapping faults when booting on
hardware that has unmasked IO-APIC pins.
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
There's no need to save and restore the IO-APIC entries, the entries
prior to suspension have already been saved by ioapic_suspend, and
will be restored by ioapic_resume. Note that at the point where
resume_x2apic gets called the IO-APIC has not yet resumed, and hence
all entries should be masked.
Note this shouldn't introduce any functional change.
Suggested-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
__2M_rwdata_end marks the first byte after the Xen image, not its last
byte. Subtract 1 to obtain the upper bound to compare against. (Note
that instead switching from <= to < is less desirable, as in principle
__pa() might return rubbish for addresses outside of the Xen image.)
Since the & needs to be dropped from the line in question, also drop it
from the adjacent one.
Reported-by: Julien Grall <julien.grall@arm.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
LIBXL_PASSTHROUGH_UNKNOWN (aka "ENABLED" in an earlier uncommitted
version of this code) is doing double duty. We actually need all of
the following to be specifiable:
* "default": enable PT iff we have devices to
pass through specified in the initial config file.
* "enabled" (and fail if the platform doesn't support it).
* "disabled" (and reject future PT hotplug).
* "share_pt"/"sync_pt": enable PT and set a specific PT mode.
Defaulting and error checking should be done in libxl. So, we make
several changes here.
We introduce "enabled", and rename "unknown" to "default".
We move all of the error checking and defaulting code from xl into
libxl. Now, libxl__domain_config_setdefault has all of the necessary
information to get this right. So we can do it all there. Choosing
the specific mode is arch-specific.
We can also arrange to have only one place each which calculates
(i) whether passthrough needs to be enabled because pt devices were
specified (ii) whether pt_share can be used (for each arch).
xl now only has to parse the enum in the same way as it parses all
other enums.
This change fixes a regression from earlier 4.13-pre: until recent
changes, passthrough was only enabled by default if passthrough
devices were specified. We restore this behaviour.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
CC: Stefano Stabellini <sstabellini@kernel.org>
CC: Julien Grall <julien@xen.org>
CC: Volodymyr Babchuk <Volodymyr_Babchuk@epam.com>
CC: Andrew Cooper <Andrew.Cooper3@citrix.com>
CC: Paul Durrant <pdurrant@gmail.com>
CC: Jan Beulich <jbeulich@suse.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
We need this before we start to figure out the passthrough mode.
I have checked that nothing in libxl__domain_create_info_setdefault
nor the two implementations of ..._arch_... accesses anything else,
other than (i) the domain type (which this function is responsible for
setting and nothing before it looks at) (ii) c_info->ssidref (which is
defaulted by flask code near the top of
libxl__domain_config_setdefault and not accessed afterwards).
So no functional change.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
No functional change. This will let us refer to it in code we are
about to add to this function.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Wei Liu <wl@xen.org>
Release-acked-by: Juergen Gross <jgross@suse.com>
No functional change. This will let us make it into a pointer without
textual change other than to the definition.
While we are here, fix some style errors (missing { }).
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Wei Liu <wl@xen.org>
Release-acked-by: Juergen Gross <jgross@suse.com>
These are now redundant because shadow_memkb and iommu_memkb are now
defaulted automatically by libxl_domain_need_memory and
libxl_domain_create etc. Callers should not now call these; instead,
they should just let libxl take care of it.
libxl_get_required_shadow_memory was introduced in f89f555827
"remove late (on-demand) construction of IOMMU page tables"
We can freely remove it because it was never in any release.
libxl_get_required_shadow_memory has been in libxl approximately
forever. It should probably not have survived the creation of
libxl_domain_create, but it seems the API awkwardnesses we see in
recent commits prevented this. So we have to keep it. It remains
functional but we can deprecate it. Hopefully we can get rid of it
completely before we find the need to change the calculation to use
additional information which its arguments do not currently supply.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
Defaulting is supposed to be done by libxl. So these calculations
should be here in libxl. libxl__domain_config_setdefault has all the
necessary information including the values of max_memkb and max_vcpus.
The overall functional effect depends on the caller:
For xl, no change. The code moves from xl to libxl.
For callers who set one or both shadow_memkb and iommu_memkb (whether
from libxl_get_required_shadow_memory or otherwise) before calling
libxl_domain_need_memory (any version): the new code will leave their
setting(s) unchanged.
For callers who do not call libxl_domain_need_memory at all, and who
fail to set one of these memory values: now they are both are properly
set. The shadow and iommu memory to be properly accounted for as
intended.
For callers which call libxl_domain_need_memory and request the
current API (4.13) or which track libxl, the default values are also
now right and everything works as intended.
For callers which call libxl_domain_need_memory, and request an old
pre-4.13 libxl API, and which leave one of these memkb settings unset,
we take special measures to preserve the old behaviour.
This means that they don't get the additional iommu memory and are at
risk of the domain running out of memory as a result of f89f555827
"remove late (on-demand) construction of IOMMU page tables". But this
is no worse than the state just after f89f555827, which already
broke such callers in that way. This is perhaps justifiable because
of the API stability warning next to libxl_domain_need_memory.
An alternative would be to drop the special-casing of these callers.
That would cause a discrepancy between libxl_domain_need_memory and
libxl_domain_create: the former would not include the iommu memory and
the latter would. That seems worse, but it's debateable.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
This should calculate the extra memory needed for shadow and iommu,
the defaults for which depend on values in c_info. So we need this to
have the complete domain config available.
And the defaults should actually be updated and stored. So make it
non-const.
We provide the usual kind of compatibility function for callers
expecting 4.12 and earlier. This function becomes responsible for the
clone-and-modify of the b_info.
No overall functional change for external libxl callers which use the
API version system to request a particular API version.
Other external libxl callers will need to update their calling code,
and will then find that the new version of this function fills in most
of the defaults in d_config. Because libxl__domain_config_setdefault
doesn't quite do all of the defaults, that's only partial. For
present purposes that doesn't matter because none of the missing
settings are used by the memory calculations. It does mean we need to
document in the API spec that the defaulting is only partial.
This lack of functional change is despite the fact that
numa_place_domain now no longer calls
libxl__domain_build_info_setdefault (via libxl_domain_need_memory).
That is OK because it's idempotent and numa_place_domain's one call
site is libxl__build_pre which is called from libxl__domain_build
which is called from domcreate_bootloader_done, well after the
defaults are set by initiate_domain_create.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
Break out this into a new function. We are going to want to call it
from a new call site.
Unfortunately not all of the defaults can be moved into the new
function without changing the order in which things are done. That
does not seem wise at this stage of the release. The effect is that
additional calls to libxl__domain_config_setdefault (which are going
to be introduced) do not quite set everything. But they will do what
is needed. After Xen 4.13 is done, we should move those settings into
the right order.
No functional change.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
According to git log -G:
0x040700 was introduced in 304400459e (aka 4.7.0-rc1~481)
"tools/libxl: rename remus device to checkpoint device"
0x040800 was introduced in 57f8b13c72 (aka 4.8.0-rc1~437)
"libxl: memory size in kb requires 64 bit variable"
It is surprising that no-one noticed this.
Anyway, in the meantime, we should fix it. Backporting this is
probably a good idea: it won't change the behaviour for existing
callers but it will avoid errors for some older correct uses.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
We are now down to 0 SVM maintainers who are active and wish to hold the
position. In agreement with AMD, Jan and I will take over maintainership in
the short term.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
We always skip the IOMMU device when creating DT for hwdom if there is
an appropriate driver for it in Xen (device_get_class(iommu_node)
returns DEVICE_IOMMU). So, even if it is not used by Xen it will be skipped.
We should also skip the IOMMU specific properties of the master device
behind that IOMMU in order to avoid exposing an half complete IOMMU
bindings to hwdom.
According to the Linux's docs:
1. Documentation/devicetree/bindings/iommu/iommu.txt
2. Documentation/devicetree/bindings/pci/pci-iommu.txt
Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Acked-by: Julien Grall <julien.grall@arm.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
Current description of the file by `file`:
common/Kconfig: Non-ISO extended-ASCII text
Change that byte to an ascii quote so the file can become properly
encoded, and all ASCII.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
If a HVM/PVH guest writes to MSR_IA32_TSC{_ADJUST} and thus changes
the value of the time stamp counter the vcpu time info must also be
updated, or the time calculated by the guest using the Xen PV clock
interface will be skewed.
Update the vcpu time info when the guest writes to either MSR_IA32_TSC
or MSR_IA32_TSC_ADJUST. This fixes lockups seen when running the
pv-shim on AMD hardware, since the shim will aggressively try to keep
TSCs in sync by periodically writing to MSR_IA32_TSC if the TSC is not
reliable.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Wei Liu <wl@xen.org>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
Since commit 8d3c326f67 ("xen: let vcpu_create() select processor")
the initial processor for all pv-shim vcpus will be 0, as no other cpus
are online when the vcpus are created. Before that commit the vcpus
would have processors set not being online yet, which worked just by
chance.
When the pv-shim vcpu becomes active it will have a hard affinity
not matching its initial processor assignment leading to failing
ASSERT()s or other problems depending on the selected scheduler.
Fix that by doing the affinity setting after onlining the cpu but
before taking the vcpu up. For vcpu 0 this is still in
sched_setup_dom0_vcpus(), for the other vcpus setting the affinity
there can be dropped.
Fixes: 8d3c326f67 ("xen: let vcpu_create() select processor")
Reported-by: Sergey Dyasli <sergey.dyasli@citrix.com>
Tested-by: Sergey Dyasli <sergey.dyasli@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: George Dunlap <george.dunlap@citrix.com>
Linux has started using RDTSCP as of v5.1. This has highlighted a bug in Xen,
where virtual vmexit simply gives up.
(XEN) d1v1 Unhandled nested vmexit: reason 51
(XEN) domain_crash called from vvmx.c:2671
(XEN) Domain 1 (vcpu#1) crashed on cpu#2:
Handle RDTSCP in the virtual vmexit hander in the same was as RDTSC
intercepts.
Reported-by: Sarah Newman <srn@prgmr.com>
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Tested-by: Chris Brannon <cmb@prgmr.com>
Reviewed-by: Wei Liu <wl@xen.org>
Release-acked-by: Juergen Gross <jgross@suse.com>
The virtual address of the base of the IOMMU's regsters is not useful for
diagnostic purposes, and is quite voluminous. The PCI coordinates is by far
the most useful piece of identifying information.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
The xen-ucode utility is new with the late loading improvements in 4.13.
Update the documentation suitably.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
The current implementations of xen_{map, unmap}_table() expect
{map, unmap}_domain_page() to be usable. Those helpers are used to
map/unmap page tables while update Xen page-tables.
Since commit 022387ee1a "xen/arm: mm: Don't open-code Xen PT update in
{set, clear}_fixmap()", setup_fixmap() will make use of the helpers
mentioned above. When booting Xen using GRUB, setup_fixmap() may be used
before map_domain_page() can be called. This will result to data abort:
(XEN) Data Abort Trap. Syndrome=0x5
(XEN) CPU0: Unexpected Trap: Data Abort
[...]
(XEN) Xen call trace:
(XEN) [<000000000025ab6c>] mm.c#xen_pt_update+0x2b4/0x59c (PC)
(XEN) [<000000000025ab20>] mm.c#xen_pt_update+0x268/0x59c (LR)
(XEN) [<000000000025ae70>] set_fixmap+0x1c/0x2c
(XEN) [<00000000002a9c98>] copy_from_paddr+0x7c/0xdc
(XEN) [<00000000002a4ae0>] has_xsm_magic+0x18/0x34
(XEN) [<00000000002a5b5c>] bootfdt.c#early_scan_node+0x398/0x560
(XEN) [<00000000002a5de0>] device_tree_for_each_node+0xbc/0x144
(XEN) [<00000000002a5ed4>] boot_fdt_info+0x6c/0x260
(XEN) [<00000000002ac0d0>] start_xen+0x108/0xc74
(XEN) [<000000000020044c>] arm64/head.o#paging+0x60/0x88
During early boot, the page tables are either statically allocated in
Xen binary or allocated via alloc_boot_pages().
For statically allocated page-tables, they will already be mapped as
part of Xen binary. So we can easily find the virtual address.
For dynamically allocated page-tables, we need to rely
map_domain_page() to be functionally working.
For arm32, the call will be usable much before page can be dynamically
allocated (see setup_pagetables()). For arm64, the call will be usable
after setup_xenheap_mappings().
In both cases, memory are given to the boot allocator afterwards. So we
can rely on map_domain_page() for mapping page tables allocated
dynamically.
The helpers xen_{map, unmap}_table() are now updated to take into
account the case where page-tables are part of Xen binary.
Fixes: 022387ee1a ('xen/arm: mm: Don't open-code Xen PT update in {set, clear}_fixmap()')
Signed-off-by: Julien Grall <julien.grall@arm.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
The current size of Xen is computed using _end - _start + 1. However,
_end is pointing one past the end of Xen, so the size of Xen is
off-by-one.
Signed-off-by: Julien Grall <julien.grall@arm.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
virt_to_maddr() is using the hardware page-table walk instructions to
translate a virtual address to physical address. The function should
only be called on virtual address mapped.
_end points past the end of Xen binary and may not be mapped when the
binary size is page-aligned. This means virt_to_maddr() will not be able
to do the translation and therefore crash Xen.
Note there is also an off-by-one issue in this code, but the panic will
trump that.
Both issues can be fixed by using _end - 1 in the check.
Signed-off-by: Julien Grall <julien.grall@arm.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
These functions require a third argument of type const *libxl_asyncop_how.
Pass nil to fix compilation errors. This will have the effect of
performing these operations synchronously.
Signed-off-by: Nick Rosbrook <rosbrookn@ainfosec.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
Put together an introduction page for the Sphinx/RST docs, along with a
glossary which will accumulate over time.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Lars Kurth <lars.kurth@citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
At the moment, boot pagetables are only cleared once at boot. This means
when booting CPU2 (and onwards) then boot pagetables will not be
cleared.
To keep the interface exactly the same for all secondary CPU, the boot
pagetables are now cleared before bringing-up each secondary CPU.
Signed-off-by: Julien Grall <julien.grall@arm.com>
Reviewed-by: Volodymyr Babchuk <volodymyr_babchuk@epam.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Release-acked-by: Juergen Gross <jgross@suse.com>
The function read_vtpmblk uses printf(3), but stdio.h is not included
in this file. This results in a warning from gcc-7:
vtpmblk.c: In function 'read_vtpmblk':
vtpmblk.c:322:7: warning: implicit declaration of function 'printf' [-Wimplicit-function-declaration]
printf("Expected: ");
vtpmblk.c:322:7: warning: incompatible implicit declaration of built-in function 'printf'
vtpmblk.c:322:7: note: include '<stdio.h>' or provide a declaration of 'printf'
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Release-acked-by: Juergen Gross <jgross@suse.com>
Sphinx, its linters, and RST modes in common editors, expect 3 spaces of
indentation. Some bits already conform to this expectation. Update the
rest to match.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Lars Kurth <lars.kurth@citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
This has actually been present since c/s bd7c09c0 in 2008, and survived
through all of the recent microcode refactoring.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
make_cpus_node() is using a static buffer to generate the FDT node name.
While mpdir_aff is a 64-bit integer, we only ever use the bits [23:0] as
only AFF{0, 1, 2} are supported for now.
To avoid any potential issues in the future, check that mpdir_aff has
only bits [23:0] set.
Take the opportunity to reduce the size of the buffer. Indeed, only 8
characters are needed to print a 32-bit hexadecimal number. So
sizeof("cpu@") + 8 + 1 (for '\0') = 13 characters is sufficient.
Fixes: c81a791d34 (xen/arm: Set 'reg' of cpu node for dom0 to match MPIDR's affinity)
Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Reviewed-by: Julien Grall <julien.grall@arm.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
Now that xl.cfg has an option to explicitly enable IOMMU mappings for a
domain, migration may be needlessly vetoed due to the check of
is_iommu_enabled() in paging_log_dirty_enable().
There is actually no need to prevent logdirty from being enabled unless
devices are assigned to a domain.
NOTE: While in the neighbourhood, the bool_t parameter type in
paging_log_dirty_enable() is replaced with a bool and the format
of the comment in assign_device() is fixed.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
In some graphics modes firmware is allowed to return 0 in pixel reserved
bitmask which doesn't go against UEFI Spec 2.8 (12.9 Graphics Output Protocol).
Without this change non-TrueColor modes won't work which will cause
GOP init to fail - observed while trying to boot EFI Xen with Cirrus VGA.
Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
The binding for the dom0less module does not match Xen implementation.
Any module should contain the compatible "multiboot,module" to be
recognized.
This was clearly an oversight as other examples with Xen code base
provide the compatible "multiboot,module".
So fix the binding and the example associated to it.
Signed-off-by: Julien Grall <julien.grall@arm.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Release-acked-by: Juergen Gross <jgross@suse.com>
c/s c0902a9a14 refactored hvm_enable() a little, but dropped the logic which
cleared hap_supported in the case that the user had asked for it off.
This results in Xen booting up, claiming:
(XEN) HVM: Hardware Assisted Paging (HAP) detected but disabled
but with HAP advertised via sysctl, and XEN_DOMCTL_CDF_hap being accepted in
domain_create().
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Acked-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Wei Liu <wl@xen.org>
Release-acked-by: Juergen Gross <jgross@suse.com>
The current implementation of host_maskall makes it sticky across
assign and deassign calls, which means that once a guest forces Xen to
set host_maskall the maskall bit is not going to be cleared until a
call to PHYSDEVOP_prepare_msix is performed. Such call however
shouldn't be part of the normal flow when doing PCI passthrough, and
hence the flag needs to be cleared when assigning in order to prevent
host_maskall being carried over from previous assignations.
Note that the entry maskbit is reset when the msix capability is
initialized, and the guest_maskall field is also cleared so that the
hardware value matches Xen's internal state (hardware maskall =
host_maskall | guest_maskall).
Also note that doing the reset of host_maskall there would allow the
guest to reset such field by enabling and disabling MSIX, which is not
intended.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Tested-by: Chao Gao <chao.gao@intel.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
If a bootloader is using native driver instead of EFI GOP it might
reset graphics mode to be different from what has been originally set
by firmware. While booting through MB2 Xen either need to parse video
setting passed by MB2 and use them instead of what GOP reports or
reset the mode to synchronise it with firmware - prefer the latter.
Observed while booting Xen using MB2 with EFI GRUB2 compiled with
all possible video drivers where native drivers take priority over firmware.
Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
Make sure we don't leave any DTEs unexpected requests through which
would be passed through untranslated. Set V and IV right away (with
all other fields left as zero), relying on the V and/or IV bits
getting cleared only by amd_iommu_set_root_page_table() and
amd_iommu_set_intremap_table() under special pass-through circumstances.
Switch back to initial settings in amd_iommu_disable_domain_device().
Take the liberty and also make the latter function static, constifying
its first parameter at the same time, at this occasion.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
The command ring buffer doesn't need clearing up front in any event.
Subsequently we'll also want to avoid clearing the device tables.
While playing with functions signatures replace undue use of fixed width
types at the same time, and extend this to deallocate_buffer() as well.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
Andrew Cooper
Roger Pau Monné
Jan Beulich
Ian Jackson
Oleksandr Tyshchenko
Anthony PERARD
Juergen Gross
Julien Grall
Nick Rosbrook
Tim Deegan
Olaf Hering
Stefano Stabellini
Paul Durrant
Igor Druzhinin