The variable 'msec' declared in the macro shadows the local
variable in 'ehci_dbgp_bios_handoff', but to prevent any
future clashes with other functions the macro is converted to
a static inline function.
No functional change.
Signed-off-by: Nicola Vetrini <nicola.vetrini@bugseng.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
Common code references both, so the variables shouldn't need declaring
and defining by every arch. While moving the definitions, add
__read_mostly (__ro_after_init would only be appropriate when
!mem_hotplug).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Julien Grall <jgrall@amazon.com>
From briefly going over 9062553a0d it looks like the #include in what
was ac_timer.c was added there for no reason. It's unneeded now in any
event, and it is the sole reason for Arm to have that dummy header.
Purge that, thus avoiding PPC (and later RISC-V) to also gain one.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Julien Grall <jgrall@amazon.com>
With the last uses gone, move the type to linux-compat.h.
No functional change intended.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Have these in one place, for all architectures to use. Also use the C99
types as the "original" ones, and derive the Linux compatible ones
(which we're trying to phase out). For __s<N>, seeing that no uses exist
anymore, move them to a new Linux compatibility header (as an act of
precaution - as said, we don't have any uses of these types right now).
In some Flask sources inclusion of asm/byteorder.h needs moving later.
No functional change intended.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Julien Grall <jgrall@amazon.com>
Instead of repeating the same sequence of instructions to flush the TLBs
in various places, introduce a macro flush_xen_tlb_local and make use of
it. This is similar to what was done for arm32 by the commit:
dea9dddece
This is also making the flush sequence in enable_mmu more clear and
consistent.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Luca Fancellu <luca.fancellu@arm.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Julien Grall <jgrall@amazon.com>
In case Xen has been configured with "--disable-pygrub", don't accept
the domain config option "bootloader=pygrub".
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
The only in-tree user of libfsimage is pygrub. Now that it is possible
to disable the build of pygrub, the same should be possible for
libfsimage.
Add an option for controlling the build of libfsimage. The default is
on if pygrub is being built, and off if it isn't. Without pygrub the
build of libfsimage can be enabled via --enable-libfsimage.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Add a "--disable-pygrub" option for being able to disable the build
and installation of pygrub.
There are two main reasons to do so:
- A main reason to use pygrub is to allow a PV guest to choose its
bitness (32- or 64-bit). Pygrub allows that by looking into the boot
image and to start the guest in the correct mode depending on the
kernel selected. With 32-bit PV guests being deprecated and the
possibility to even build a hypervisor without 32-bit PV support,
this use case is gone for at least some configurations.
- Pygrub is running in dom0 with root privileges. As it is operating
on guest controlled data (the boot image) and taking decisions based
on this data, there is a higher security risk. Not being possible
to use pygrub is thus a step towards a reduction of attack surface.
Default is still to build and install pygrub.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
When CONFIG_ARM is defined, a `vuart` field is added to struct ns16550,
but accesses to this field in ns16550_uart_dt_init weren't correctly
guarded. Fix build on !ARM platforms that define CONFIG_HAS_DEVICE_TREE
by correctly guarding access to the vuart field in this function.
Signed-off-by: Shawn Anastasio <sanastasio@raptorengineering.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
While what "tmp" points to has been cleared at the end of the first
iteration of parseNetDevLine()'s main loop, this is too late for the
first iteration's invocation of strpbrk() (copying the interface name).
Properly nul-terminate the string at population time instead, removing
the late clearing.
While there also eliminate a confusing (because of being wrong) comment:
A regex parsing error would be handled one further scope outwards. Here
we're dealing with field 1 vs any of the later fields.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
It was observed that smoke.serial file (used to store boot logs) is
missing in artifacts of qemu based arm32 jobs. This is because the
artifacts:paths listing smoke.serial specifies paths relative to the
project directory but the qemu-smoke-dom0{less}-arm32.sh scripts create
this file under binaries/. Fix it so that smoke.serial gets created in
project directory just like for every other test job.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Luca Fancellu <luca.fancellu@arm.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
The parameters in the function declaration 'construct_dom0' violate
Rule 8.3:
"All declarations of an object or function shall use the same names
and type qualifiers", but also cause shadowing inside the declaration
scope with the variable "static struct file __initdata kernel;" in
'xen/common/efi/boot.c'. Renaming the parameters in the declaration
resolves both issues
The local variable 'mask' is removed because it shadows the homonymous
variable defined in an outer scope. There's no change to the semantics since
the last use of this variable is in the scope touched by this commit.
No functional changes.
Signed-off-by: Nicola Vetrini <nicola.vetrini@bugseng.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Jan Beulich <jbeulich@suse.com>
The macros defined 'xen/include/public/arch-x86/xen-mca.h' are revised
to address the following concerns:
- needless underscore prefixes for parameter names;
- the variable 'i' in function 'mce_action' that is shadowed
by the local variable in the macro.
Therefore, the refactoring aims to resolve present shadowing
issues, which violate MISRA C:2012 Rule 5.3, and lessen the
probability of future ones with some renames.
No functional change.
Signed-off-by: Nicola Vetrini <nicola.vetrini@bugseng.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Rename the local variables s/xsave/xstate/ to avoid clashing with
function 'xsave' declared in 'xen/arch/x86/include/asm/xstate.h'.
No functional changes.
Signed-off-by: Nicola Vetrini <nicola.vetrini@bugseng.com>
[stefano: defined/declared in commit message]
Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Variable 'mpc_default_type' in 'xen/arch/x86/include/asm/mpspec.h'
has no uses and causes shadowing with function parameter names
in 'mpparse.c'. Therefore, it is removed.
No functional changes.
Signed-off-by: Nicola Vetrini <nicola.vetrini@bugseng.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
GDS_CTRL is introduced by the August 2023 microcode. GDS_NO is for current
and future processors not susceptible to GDS.
This is part of XSA-435 / CVE-2022-40982
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
The August 2023 microcode for GDS has an impact on the CLWB instruction. See
code comments for full details.
This is part of XSA-435 / CVE-2022-40982
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
On native, synthesise the SRSO bits by probing various hardware properties as
given by AMD.
Extend the IBPB-on-entry mitigations to Zen3/4 CPUs. There is a microcode
prerequisite to make this an effective mitigation.
This is part of XSA-434 / CVE-2023-20569
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
AMD have specified new CPUID bits relating to SRSO.
* SRSO_NO indicates that hardware is no longer vulnerable to SRSO.
* IBPB_BRTYPE indicates that IBPB flushes branch type information too.
* SBPB indicates support for a relaxed form of IBPB that does not flush
branch type information.
Current CPUs (Zen4 and older) are not expected to enumerate these bits.
Native software is expected to synthesise them for guests using model and
microcode revision checks.
Two are just status bits, and SBPB is trivial to support for guests by
tweaking the reserved bit calculation in guest_wrmsr() and feature
dependencies. Expose all by default to guests, so they start showing up when
Xen synthesises them.
While adding feature dependenies for IBPB, fix up an overlooked issue from
XSA-422. It's inappropriate to advertise that IBPB flushes RET predictions if
IBPB is unavailable itself.
This is part of XSA-434 / CVE-2023-20569
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
... in order to make the SRSO mitigations easier to integrate.
* Check for AMD/Hygon CPUs directly, rather than assuming based on IBPB.
In particular, Xen supports synthesising the IBPB bit to guests on Intel to
allow IBPB while dissuading the use of (legacy) IBRS.
* Collect def_ibpb_entry rather than opencoding the BTC_NO calculation for
both opt_ibpb_entry_{pv,hvm}.
No functional change.
This is part of XSA-434 / CVE-2023-20569
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
The opensuse-tumbleweed build jobs currently fail with:
/builds/xen-project/xen/stubdom/tpm_emulator-x86_64/crypto/rsa.c: In function 'rsa_private':
/builds/xen-project/xen/stubdom/tpm_emulator-x86_64/crypto/rsa.c:56:7: error: the comparison will always evaluate as 'true' for the address of 'p' will never be NULL [-Werror=address]
56 | if (!key->p || !key->q || !key->u) {
| ^
In file included from /builds/xen-project/xen/stubdom/tpm_emulator-x86_64/crypto/rsa.c:17:
/builds/xen-project/xen/stubdom/tpm_emulator-x86_64/crypto/rsa.h:28:12: note: 'p' declared here
28 | tpm_bn_t p;
| ^
This is because all tpm_bn_t's are 1-element arrays (of either a GMP or
OpenSSL BIGNUM flavour).
Adjust it to compile. No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jason Andryuk <jandryuk@gmail.com>
Cortex-A77 cores (r0p0, r1p0) could deadlock on a sequence of a
store-exclusive or read of PAR_EL1 and a load with device or non-cacheable
memory attributes.
A workaround is available, but it depends on a firmware counterpart.
The proposed workaround from the errata document is to modify the software
running at EL1 and above to include a DMB SY before and after accessing
PAR_EL1.
In conjunction to the above, the firmware needs to use a specific write
sequence to several IMPLEMENTATION DEFINED registers to have the hardware
insert a DMB SY after all load-exclusive and store-exclusive instructions.
Apply the workaround to Xen where PAR_EL1 is read, implementing an helper
function to do that.
Since Xen can be interrupted by irqs in any moment, add a barrier on
entry/exit when we are running on the affected cores.
A guest without the workaround can deadlock the system, so warn the users
of Xen with the above type of cores to use only trusted guests, by
printing a message on Xen startup.
This is XSA-436 / CVE-2023-34320.
Signed-off-by: Luca Fancellu <luca.fancellu@arm.com>
Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
A missing change to the type in 'opt_arat' declaration introduced a new
violation of MISRA C:2012 Rule 8.3 ("All declarations of an object or
function shall use the same names and type qualifiers").
Change the type to restore the consistency between all declarations of
the object and drop a further usage of 'bool_t'.
Fixes: 202a341f ("x86: Address violations of MISRA C:2012 by replacing bool_t uses")
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Federico Serafini <federico.serafini@bugseng.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
In osstest, the jobs using pygrub on arm64 on the branch linux-linus
started to fails with:
[Errno 28] No space left on device
Error writing temporary copy of ramdisk
This is because /var/run is small when dom0 has only 512MB to work
with, /var/run is only 40MB. The size of both kernel and ramdisk on
this jobs is now about 42MB, so not enough space in /var/run.
So, to avoid writing a big binary in ramfs, we will use /var/lib
instead, like we already do when saving the device model state on
migration.
Reported-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Jason Andryuk <jandryuk@gmail.com>
Implement the OPAL firmware calls required to write to the serial
console on PowerNV systems. Unlike pseries/Open Firmware, the OPAL
firmware interface can be used past early boot and as such the relevant
functions are not marked as __init.
Signed-off-by: Shawn Anastasio <sanastasio@raptorengineering.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Communication with firmware boot services on PowerNV requires parsing
the fdt blob passed by the bootloader in order to obtain the firmware
entrypoint. Use Xen's libfdt to do this and store the information
required for firmware calls, to be implemented in a future patch.
The full xen/common build doesn't yet work, but libfdt and its xen/lib
dependency can be made to build by defining a few stub headers.
Signed-off-by: Shawn Anastasio <sanastasio@raptorengineering.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
OPAL (OpenPower Abstraction Layer) is the interface exposed by firmware
on PowerNV (bare metal) systems. Import Linux's header definining the
API and related information.
From Linux commit 5321d1b1afb9a17302c6cec79f0cbf823eb0d3fc
Signed-off-by: Shawn Anastasio <sanastasio@raptorengineering.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
The xen sources contain violations of MISRA C:2012 Rule 7.3 whose headline
states:
"The lowercase character 'l' shall not be used in a literal suffix".
Use the "L" suffix instead of the "l" suffix, to avoid potential ambiguity.
If the "u" suffix is used near "L", use the "U" suffix instead, for consistency.
The changes in this patch are mechanical.
Signed-off-by: Gianluca Luparini <gianluca.luparini@bugseng.com>
Signed-off-by: Simone Ballarin <simone.ballarin@bugseng.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Jan Beulich <jbeulich@suse.com>
The xen sources contain violations of MISRA C:2012 Rule 7.3 whose headline
states:
"The lowercase character 'l' shall not be used in a literal suffix".
Use the "L" suffix instead of the "l" suffix, to avoid potential ambiguity.
If the "u" suffix is used near "L", use the "U" suffix instead, for consistency.
The changes in this patch are mechanical.
Signed-off-by: Gianluca Luparini <gianluca.luparini@bugseng.com>
Signed-off-by: Simone Ballarin <simone.ballarin@bugseng.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Jan Beulich <jbeulich@suse.com>
The xen sources contain violations of MISRA C:2012 Rule 7.3 whose headline
states:
"The lowercase character 'l' shall not be used in a literal suffix".
Use the "L" suffix instead of the "l" suffix, to avoid potential ambiguity.
If the "u" suffix is used near "L", use the "U" suffix instead, for consistency.
The changes in this patch are mechanical.
Signed-off-by: Gianluca Luparini <gianluca.luparini@bugseng.com>
Signed-off-by: Simone Ballarin <simone.ballarin@bugseng.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Jan Beulich <jbeulich@suse.com>
The xen sources contain violations of MISRA C:2012 Rule 7.3 whose headline
states:
"The lowercase character 'l' shall not be used in a literal suffix".
Use the "L" suffix instead of the "l" suffix, to avoid potential ambiguity.
If the "u" suffix is used near "L", use the "U" suffix instead, for consistency.
The changes in this patch are mechanical.
Signed-off-by: Gianluca Luparini <gianluca.luparini@bugseng.com>
Signed-off-by: Simone Ballarin <simone.ballarin@bugseng.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Jan Beulich <jbeulich@suse.com>
The xen sources contain violations of MISRA C:2012 Rule 7.3 whose headline
states:
"The lowercase character 'l' shall not be used in a literal suffix".
Use the "L" suffix instead of the "l" suffix, to avoid potential ambiguity.
If the "u" suffix is used near "L", use the "U" suffix instead, for consistency.
The changes in this patch are mechanical.
Signed-off-by: Gianluca Luparini <gianluca.luparini@bugseng.com>
Signed-off-by: Simone Ballarin <simone.ballarin@bugseng.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Jan Beulich <jbeulich@suse.com>
While not required today (ECLAIR jobs come first), add "needs: []" for
future-proofing and consistency with other jobs in the pipeline.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Give a name to unnamed parameters to address violations of
MISRA C:2012 Rule 8.2 ("Function types shall be in prototype form with
named parameters").
Keep consistency between parameter types used in function
declarations and the ones used in the corresponding function
definitions, thus addressing violations of MISRA C:2012 Rule 8.3
("All declarations of an object or function shall use the same names
and type qualifiers").
No functional change.
Signed-off-by: Federico Serafini <federico.serafini@bugseng.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Rename variables to avoid shadowing and thus address
MISRA C:2012 Rule 5.3:
"An identifier declared in an inner scope shall not hide an
identifier declared in an outer scope".
The shadowing happens between the global variable 'mtrr_state' declared
in 'xen/arch/x86/include/asm/mtrr.h' and local variable names. The
latter are renamed to 'm', which is used elsewhere in
'xen/arch/x86/hvm/mtrr.c' for the same purpose.
No functional changes.
Signed-off-by: Nicola Vetrini <nicola.vetrini@bugseng.com>
[stefano: improve commit description]
Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Jan Beulich <jbeulich@suse.com>
Suitable mechanical renames are made to avoid shadowing
the function identifier 'wait' declared in 'xen/include/xen/wait.h',
thus addressing violations of MISRA C:2012 Rule 5.3:
"An identifier declared in an inner scope shall not hide an
identifier declared in an outer scope"
The parameter name 'bar' is added as well to comply with MISRA C:2012
Rules 8.2 and 8.3.
Signed-off-by: Nicola Vetrini <nicola.vetrini@bugseng.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Jan Beulich <jbeulich@suse.com>
Change parameter name in monitor_domctl() declaration for
consistency with the corresponding definition.
This addresses a violation of MISRA C:2012 Rule 8.3: "All declarations
of an object or function shall use the same names and type qualifiers".
No functional changes.
Signed-off-by: Federico Serafini <federico.serafini@bugseng.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Tamas K Lengyel <tamas@tklengyel.com>
This option is particularly dubious as Xen does not use Protection Keys, owing
to the sharing of pagetables with PV guests. All this option does is hide PKU
by default from HVM guests, and is therefore redundant with the more generic
cpuid=no-pku.
The variable ought to be in __initdata given it's single user, but deleting it
entirely looks to be a better course of action.
Visibility of PKU to guests should be handled via its vm.cfg file.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Henry Wang <Henry.Wang@arm.com>
arm32 merely covers the XENHEAP, whereas arm64 currently covers anything in
the frame table. These comments highlight why arm32 doesn't need to account for PDX
compression in its __va() implementation while arm64 does.
Signed-off-by: Alejandro Vallejo <alejandro.vallejo@cloud.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
The types u{8,16,32,64} defined in 'xen/arch/x86/include/asm/types.h'
shadow the variables in the modified function, hence violating Rule 5.3.
Therefore, the rename takes care of the shadowing.
No functional changes.
Signed-off-by: Nicola Vetrini <nicola.vetrini@bugseng.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Give a name to unnamed parameters to address violations of
MISRA C:2012 Rule 8.2 ("Function types shall be in prototype form with
named parameters").
Keep consistency between object and function declarations thus
addressing violations of MISRA C:2012 Rule 8.3 ("All declarations of an
object or function shall use the same names and type qualifiers").
Replace the occurrences of bool_t with bool.
No functional change.
Signed-off-by: Federico Serafini <federico.serafini@bugseng.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Jan Beulich <jbeulich@suse.com>
From: Gianluca Luparini <gianluca.luparini@bugseng.com>
The xen sources contain violations of MISRA C:2012 Rule 7.3 whose headline
states:
"The lowercase character 'l' shall not be used in a literal suffix".
Use the "L" suffix instead of the "l" suffix, to avoid potential ambiguity.
If the "u" suffix is used near "L", use the "U" suffix instead, for consistency.
The changes in this patch are mechanical.
Signed-off-by: Gianluca Luparini <gianluca.luparini@bugseng.com>
Signed-off-by: Simone Ballarin <simone.ballarin@bugseng.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
From: Gianluca Luparini <gianluca.luparini@bugseng.com>
The xen sources contain violations of MISRA C:2012 Rule 7.3 whose headline
states:
"The lowercase character 'l' shall not be used in a literal suffix".
Use the "L" suffix instead of the "l" suffix, to avoid potential ambiguity.
If the "u" suffix is used near "L", use the "U" suffix instead, for consistency.
The changes in this patch are mechanical.
Signed-off-by: Gianluca Luparini <gianluca.luparini@bugseng.com>
Signed-off-by: Simone Ballarin <simone.ballarin@bugseng.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
The xen sources contain violations of MISRA C:2012 Rule 7.3 whose headline
states:
"The lowercase character 'l' shall not be used in a literal suffix".
Use the "L" suffix instead of the "l" suffix, to avoid potential ambiguity.
If the "u" suffix is used near "L", use the "U" suffix instead, for consistency.
The changes in this patch are mechanical.
Signed-off-by: Gianluca Luparini <gianluca.luparini@bugseng.com>
Signed-off-by: Simone Ballarin <simone.ballarin@bugseng.com>
Reviewed-by: Luca Fancellu <luca.fancellu@arm.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Give a name to unnamed parameters to address violations of
MISRA C:2012 Rule 8.2 ("Function types shall be in prototype form with
named parameters").
Keep consistency between parameter names and types used in function
declarations and the ones used in the corresponding function
definitions, thus addressing violations of MISRA C:2012 Rule 8.3
("All declarations of an object or function shall use the same names
and type qualifiers").
No functional changes.
Signed-off-by: Federico Serafini <federico.serafini@bugseng.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Dario Faggioli <dfaggioli@suse.com>
Rule 5.3 has the following headline:
"An identifier declared in an inner scope shall not hide an
identifier declared in an outer scope"
The renaming s/sched_id/scheduler_id/ of the function defined in
'xen/common/sched/core.c' prevents any hiding of that function
by the instances of homonymous function parameters that
are defined in inner scopes.
Similarly, the renames
- s/ops/operations/ for the static variable in 'xen/common/sched/core.c'
- s/do_softirq/needs_softirq/
are introduced for variables, to avoid any conflict with homonymous
parameters or function identifiers.
Moreover, the variable 'loop' defined at 'xen/common/sched/credit2.c:3887'
has been dropped, in favour of the homonymous variable declared in the
outer scope. This in turn requires a modification of the printk call that
involves it.
Signed-off-by: Nicola Vetrini <nicola.vetrini@bugseng.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Dario Faggioli <dfaggioli@suse.com>
In the latter case the variable altogether is then unused and hence gets
dropped, eliminating a Misra Rule 5.3 violation. I'm afraid I mistakenly
introduced both assignments in 57a57465da ("x86/HVM: use available
linear->phys translations in REP MOVS/STOS handling"), likely as a
result of some re-work on the patch.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Paul Durrant <paul@xen.org>
The test artifacts export jobs don't need prerequisites, so we should
specify "needs" with an empty array for them. That way, they are not
going to fruitlessly wait for previous jobs (ECLAIR jobs) to complete
before continuing.
Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com>
Reviewed-by: Michal Orzel <michal.orzel@amd.com>
Nicola Vetrini