Out of an abudnance of caution, implement the long loop too, and allowing for
it to be opted in to.
This is part of XSA-456 / CVE-2024-2201.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
(cherry picked from commit d5887c0dec)
In the absence of BHI_DIS_S, mitigating Native-BHI requires the use of a
software sequence.
Introduce a new bhb-seq= option to select between avaialble sequences and
bhb-entry= to control the per-PV/HVM actions like we have for other blocks.
Activate the short sequence by default for PV and HVM guests on affected
hardware if BHI_DIS_S isn't present.
This is part of XSA-456 / CVE-2024-2201.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
(cherry picked from commit 689ad48ce9)
Implement clear_bhb_{tsx,loops}() as per the BHI guidance. The loops variant
is set up as the "short" sequence.
Introduce SCF_entry_bhb and extend SPEC_CTRL_ENTRY_* with a conditional call
to selected clearing routine.
Note that due to a limitation in the ALTERNATIVE capability, the TEST/JZ can't
be included alongside a CALL in a single alternative block. This is going to
require further work to untangle.
The BHB sequences (if used) must be after the restoration of Xen's
MSR_SPEC_CTRL value, which must be accounted for when judging whether it is
safe to skip the safety LFENCEs.
This is part of XSA-456 / CVE-2024-2201.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
(cherry picked from commit 954c983abc)
Introduce a "bhi-dis-s" boolean to match the other options we have for
MSR_SPEC_CTRL values. Also introduce bhi_calculations().
Use BHI_DIS_S whenever possible.
Guests which are levelled to be migration compatible with older CPUs can't see
BHI_DIS_S, and Xen must fill in the difference to make the guest safe. Use
the virt MSR_SPEC_CTRL infrastructure to force BHI_DIS_S behind the guest's
back.
This is part of XSA-456 / CVE-2024-2201.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
(cherry picked from commit 62a1106415)
A TSX Abort is one option mitigate Native-BHI, but a guest kernel doesn't get
to see this if Xen has turned RTM off using MSR_TSX_{CTRL,FORCE_ABORT}.
Therefore, the meaning of RTM_ALWAYS_ABORT has been adjusted to "XBEGIN won't
fault", and it should be exposed to guests so they can make a better decision.
Expose it in the max policy for any RTM-capable system. Offer it by default
only if RTM has been disabled.
Update test-tsx to account for this new meaning. While adjusting the logic in
test_guest_policies(), take the opportunity to use feature names (now they're
available) to make the logic easier to follow.
This is part of XSA-456 / CVE-2024-2201.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit c94e210592)
Indirect JMPs which are not tailcalls can lead to an unwelcome form of
speculative type confusion, and we've removed the uses of INDIRECT_JMP to
compensate. Remove the temptation to reintroduce new instances.
This is part of XSA-456 / CVE-2024-2201.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 0b66d7ce3c)
Mixing up JMP and CALL indirect targets leads a very fun form of speculative
type confusion. A target which is expecting to be called CALLed needs a
return address on the stack, and an indirect JMP doesn't place one there.
An indirect JMP which predicts to a target intending to be CALLed can end up
with a RET speculatively executing with a value from the JMPers stack frame.
There are several ways get indirect JMPs in Xen.
* From tailcall optimisations. These are safe because the compiler has
arranged the stack to point at the callee's return address.
* From jump tables. These are unsafe, but Xen is built with -fno-jump-tables
to work around several compiler issues.
* From reset_stack_and_jump_ind(), which is particularly unsafe. Because of
the additional stack adjustment made, the value picked up off the stack is
regs->r15 of the next vCPU to run.
In order to mitigate this type confusion, we want to make all indirect targets
be CALL targets, and remove the use of indirect JMP except via tailcall
optimisation.
Luckily due to XSA-348, all C target functions of reset_stack_and_jump_ind()
are noreturn. {svm,vmx}_do_resume() exits via reset_stack_and_jump(); a
direct JMP with entirely different prediction properties. idle_loop() is an
infinite loop which eventually exits via reset_stack_and_jump_ind() from a new
schedule. i.e. These paths are all fine having one extra return address on
the stack.
This leaves continue_pv_domain(), which is expecting to be a JMP target.
Alter it to strip the return address off the stack, which is safe because
there isn't actually a RET expecting to return to its caller.
This allows us change reset_stack_and_jump_ind() to reset_stack_and_call_ind()
in order to mitigate the speculative type confusion.
This is part of XSA-456 / CVE-2024-2201.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 8e186f98ce)
Right now, they're all bytes, but MSR_SPEC_CTRL has been steadily gaining new
features.
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 45dac88e78)
With the prior refactoring, SPEC_CTRL_ENTRY_{PV,INTR} both load SCF into %ebx,
and handle the conditional safety including skipping if interrupting Xen.
Therefore, we can drop the maybexen parameter and the conditional safety.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
(cherry picked from commit 2378d16a93)
... as we do in the exit paths too. This will allow simplification to the
sub-blocks.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 9607aeb660)
Other SPEC_CTRL_* paths already use %r14 like this, and it will allow for
simplifications.
All instances of SPEC_CTRL_ENTRY_FROM_PV are followed by a GET_STACK_END()
invocation, so this change is only really logic and register shuffling.
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 22390697bf)
Right now, we have a mix of safety strategies in different blocks, making the
logic fragile and hard to follow.
Start addressing this by having a safety LFENCE at the end of the blocks,
which can be patched out if other safety criteria are met. This will allow us
to simplify the sub-blocks. For SPEC_CTRL_ENTRY_FROM_IST, simply leave an
LFENCE unconditionally at the end; the IST path is not a fast-path by any
stretch of the imagination.
For SPEC_CTRL_ENTRY_FROM_INTR, the existing description was incorrect. The
IRET #GP path is non-fatal but can occur with the guest's choice of
MSR_SPEC_CTRL. It is safe to skip the flush/barrier-like protections when
interrupting Xen, but we must run DO_SPEC_CTRL_ENTRY irrespective.
This will skip RSB stuffing which was previously unconditional even when
interrupting Xen.
AFAICT, this is a missing cleanup from commit 3fffaf9c13 ("x86/entry: Avoid
using alternatives in NMI/#MC paths") where we split the IST entry path out of
the main INTR entry path.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
(cherry picked from commit 94896de1a9)
XSA-455 was ultimately caused by having fields with too-similar names.
Both {xen,last}_spec_ctrl are fields containing an architectural MSR_SPEC_CTRL
value. The spec_ctrl_flags field contains Xen-internal flags.
To more-obviously distinguish the two, rename spec_ctrl_flags to scf, which is
also the prefix of the constants used by the fields.
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit c62673c433)
The logic was written this way out of an abundance of caution, but the reality
is that AMD parts don't currently have the RAS-flushing side effect, nor do
they intend to gain it.
This removes one WRMSR from the VMExit path by default on Zen2 systems.
Fixes: 614cec7d79 ("x86/svm: VMEntry/Exit logic for MSR_SPEC_CTRL")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit c16a9eda77)
All of these are prediction-mode (i.e. CPL) based. They don't operate as
advertised in PV context.
Fixes: 4dd6760706 ("x86/spec-ctrl: Expose IPRED_CTRL to guests")
Fixes: 478e4787fa ("x86/spec-ctrl: Expose RRSBA_CTRL to guests")
Fixes: 583f1d0950 ("x86/spec-ctrl: Expose BHI_CTRL to guests")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
(cherry picked from commit 4b3da946ad)
There is no need for this to be an indirect jump at all. Execution always
returns to a specific location, so use a direct jump instead.
Use a named label for the jump. As both 1 and 2 have disappeared as labels,
rename 3 to skip to better describe its purpose.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit f03567bd7e)
It turns out there is something wonky on some but not all CPUs with
MSR_TSX_FORCE_ABORT. The presence of RTM_ALWAYS_ABORT causes Xen to think
it's safe to offer HLE/RTM to guests, but in this case, XBEGIN instructions
genuinely #UD.
Spot this case and try to back out as cleanly as we can.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit b33f191e3c)
We were looking for SCF_entry_ibpb in the wrong variable in the top-of-stack
block, and xen_spec_ctrl won't have had bit 5 set because Xen doesn't
understand SPEC_CTRL_RRSBA_DIS_U yet.
This is XSA-455 / CVE-2024-31142.
Fixes: 53a570b285 ("x86/spec-ctrl: Support IBPB-on-entry")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Wherever possible, it is a good idea to NULL out the visible reference to an
object prior to freeing it. The FREE*() macros already collect together both
parts, making it easy to adjust.
This has a marginal code generation improvement, as some of the calls to the
free() function can be tailcall optimised.
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit c4f427ec87)
Nicola reports that the XSA-438 fix introduced new MISRA violations because of
some incidental tidying it tried to do. The parameter is useless, so resolve
the MISRA regression by removing it.
hap_update_cr3() discards the parameter entirely, while sh_update_cr3() uses
it to distinguish internal and external callers and therefore whether the
paging lock should be taken.
However, we have paging_lock_recursive() for this purpose, which also avoids
the ability for the shadow internal callers to accidentally not hold the lock.
Fixes: fb0ff49fe9 ("x86/shadow: defer releasing of PV's top-level shadow reference")
Reported-by: Nicola Vetrini <nicola.vetrini@bugseng.com>
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Release-acked-by: Henry Wang <Henry.Wang@arm.com>
(cherry picked from commit e71157d1ac)
RFDS affects Atom cores, also branded E-cores, between the Goldmont and
Gracemont microarchitectures. This includes Alder Lake and Raptor Lake hybrid
clien systems which have a mix of Gracemont and other types of cores.
Two new bits have been defined; RFDS_CLEAR to indicate VERW has more side
effets, and RFDS_NO to incidate that the system is unaffected. Plenty of
unaffected CPUs won't be getting RFDS_NO retrofitted in microcode, so we
synthesise it. Alder Lake and Raptor Lake Xeon-E's are unaffected due to
their platform configuration, and we must use the Hybrid CPUID bit to
distinguish them from their non-Xeon counterparts.
Like MD_CLEAR and FB_CLEAR, RFDS_CLEAR needs OR-ing across a resource pool, so
set it in the max policies and reflect the host setting in default.
This is part of XSA-452 / CVE-2023-28746.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit fb5b6f6744)
... before we add yet more complexity to this logic. Mostly expanded
comments, but with three minor changes.
1) Introduce cpu_has_useful_md_clear to simplify later logic in this patch and
future ones.
2) We only ever need SC_VERW_IDLE when SMT is active. If SMT isn't active,
then there's no re-partition of pipeline resources based on thread-idleness
to worry about.
3) The logic to adjust HVM VERW based on L1D_FLUSH is unmaintainable and, as
it turns out, wrong. SKIP_L1DFL is just a hint bit, whereas opt_l1d_flush
is the relevant decision of whether to use L1D_FLUSH based on
susceptibility and user preference.
Rewrite the logic so it can be followed, and incorporate the fact that when
FB_CLEAR is visible, L1D_FLUSH isn't a safe substitution.
This is part of XSA-452 / CVE-2023-28746.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 1eb91a8a06)
VERW is going to be used for a 3rd purpose, and the existing nomenclature
didn't survive the Stale MMIO issues terribly well.
Rename the command line option from `md-clear=` to `verw=`. This is more
consistent with other options which tend to be named based on what they're
doing, not which feature enumeration they use behind the scenes. Retain
`md-clear=` as a deprecated alias.
Rename opt_md_clear_{pv,hvm} and opt_fb_clear_mmio to opt_verw_{pv,hvm,mmio},
which has a side effect of making spec_ctrl_init_domain() rather clearer to
follow.
No functional change.
This is part of XSA-452 / CVE-2023-28746.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit f7603ca252)
On parts vulnerable to RFDS, VERW's side effects are extended to scrub all
non-architectural entries in various Physical Register Files. To remove all
of Xen's values, the VERW must be after popping the GPRs.
Rework SPEC_CTRL_COND_VERW to default to an CPUINFO_error_code %rsp position,
but with overrides for other contexts. Identify that it clobbers eflags; this
is particularly relevant for the SYSRET path.
For the IST exit return to Xen, have the main SPEC_CTRL_EXIT_TO_XEN put a
shadow copy of spec_ctrl_flags, as GPRs can't be used at the point we want to
issue the VERW.
This is part of XSA-452 / CVE-2023-28746.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 0a666cf2cd)
Broken out of the following patch because this change is subtle enough on its
own. See it for the rational of why we're moving VERW.
As for how, extend the trick already used to hold one condition in
flags (RESUME vs LAUNCH) through the POPing of GPRs.
Move the MOV CR earlier. Intel specify flags to be undefined across it.
Encode the two conditions we want using SF and PF. See the code comment for
exactly how.
Leave a comment to explain the lack of any content around
SPEC_CTRL_EXIT_TO_VMX, but leave the block in place. Sods law says if we
delete it, we'll need to reintroduce it.
This is part of XSA-452 / CVE-2023-28746.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 475fa20b73)
MD_CLEAR and FB_CLEAR need OR-ing across a migrate pool. Allow this, by
having them unconditinally set in max, with the host values reflected in
default. Annotate the bits as having special properies.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
(cherry picked from commit de17162caf)
restore_all_guest() does a lot of manipulation of the stack after popping the
GPRs, and uses raw %rsp displacements to do so. Also, almost all entrypaths
use raw %rsp displacements prior to pushing GPRs.
Provide better mnemonics, to aid readability and reduce the chance of errors
when editing.
No functional change. The resulting binary is identical.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 37541208f1)
Before speculation defences, some paths in Xen could genuinely get away with
being IRQs-on at entry. But XPTI invalidated this property on most paths, and
attempting to maintain it on the remaining paths was a mistake.
Fast forward, and DO_SPEC_CTRL_COND_IBPB (protection for AMD BTC/SRSO) is not
IRQ-safe, running with IRQs enabled in some cases. The other actions taken on
these paths happen to be IRQ-safe.
Make entry_int82() and int80_direct_trap() unconditionally Interrupt Gates
rather than Trap Gates. Remove the conditional re-adjustment of
int80_direct_trap() in smp_prepare_cpus(), and have entry_int82() explicitly
enable interrupts when safe to do so.
In smp_prepare_cpus(), with the conditional re-adjustment removed, the
clearing of pv_cr3 is the only remaining action gated on XPTI, and it is out
of place anyway, repeating work already done by smp_prepare_boot_cpu(). Drop
the entire if() condition to avoid leaving an incorrect vestigial remnant.
Also drop comments which make incorrect statements about when its safe to
enable interrupts.
This is XSA-446 / CVE-2023-46836
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
(cherry picked from commit a48bb129f1)
The use of access_ok() is buggy, because it permits access to the compat
translation area. 64bit PV guests don't use the XLAT area, but on AMD
hardware, the DBEXT feature allows a breakpoint to match up to a 4G aligned
region, allowing the breakpoint to reach outside of the XLAT area.
Prior to c/s cda16c1bb2 ("x86: mirror compat argument translation area for
32-bit PV"), the live GDT was within 4G of the XLAT area.
All together, this allowed a malicious 64bit PV guest on AMD hardware to place
a breakpoint over the live GDT, and trigger a #DB livelock (CVE-2015-8104).
Introduce breakpoint_addr_ok() and explain why __addr_ok() happens to be an
appropriate check in this case.
For Xen 4.14 and later, this is a latent bug because the XLAT area has moved
to be on its own with nothing interesting adjacent. For Xen 4.13 and older on
AMD hardware, this fixes a PV-trigger-able DoS.
This is part of XSA-444 / CVE-2023-34328.
Fixes: 65e3554908 ("x86/PV: support data breakpoint extension registers")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit dc9d9aa62d)
The handling of MSR_DR{0..3}_MASK is asymmetric between PV and HVM guests.
HVM guests context switch in based on the guest view of DBEXT, whereas PV
guest switch in base on the host capability. Both guest types leave the
context dirty for the next vCPU.
This leads to the following issue:
* PV or HVM vCPU has debugging active (%dr7 + mask)
* Switch out deactivates %dr7 but leaves other state stale in hardware
* HVM vCPU with debugging activate but can't see DBEXT is switched in
* Switch in loads %dr7 but leaves the mask MSRs alone
Now, the HVM vCPU is operating in the context of the prior vCPU's mask MSR,
and furthermore in a case where it genuinely expects there to be no masking
MSRs.
As a stopgap, adjust the HVM path to switch in/out the masks based on host
capabilities rather than guest visibility (i.e. like the PV path). Adjustment
of the of the intercepts still needs to be dependent on the guest visibility
of DBEXT.
This is part of XSA-444 / CVE-2023-34327
Fixes: c097f54912 ("x86/SVM: support data breakpoint extension registers")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
(cherry picked from commit 5d54282f98)
In the Zen1 microarchitecure, there is one divider in the pipeline which
services uops from both threads. In the case of #DE, the latched result from
the previous DIV to execute will be forwarded speculatively.
This is an interesting covert channel that allows two threads to communicate
without any system calls. In also allows userspace to obtain the result of
the most recent DIV instruction executed (even speculatively) in the core,
which can be from a higher privilege context.
Scrub the result from the divider by executing a non-faulting divide. This
needs performing on the exit-to-guest paths, and ist_exit-to-Xen.
Alternatives in IST context is believed safe now that it's done in NMI
context.
This is XSA-439 / CVE-2023-20588.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit b5926c6ecf)
We already have 3 cases using STIBP as a Zen1/2 heuristic, and are about to
introduce a 4th. Wrap the heuristic into a pair of predicates rather than
opencoding it, and the explanation of the heuristic, at each usage site.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit de1d265001)
There is a corner case where e.g. an NMI hitting an exit-to-guest path after
SPEC_CTRL_EXIT_TO_* would have run the entire NMI handler *after* the VERW
flush to scrub potentially sensitive data from uarch buffers.
In order to compensate, issue VERW when exiting to Xen from an IST entry.
SPEC_CTRL_EXIT_TO_XEN already has two reads of spec_ctrl_flags off the stack,
and we're about to add a third. Load the field into %ebx, and list the
register as clobbered.
%r12 has been arranged to be the ist_exit signal, so add this as an input
dependency and use it to identify when to issue a VERW.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 3ee6066bcd)
Use %r12 to hold an ist_exit boolean. This register is zero elsewhere in the
entry/exit asm, so it only needs setting in the IST path.
As this is subtle and fragile, add check_ist_exit() to be used in debugging
builds to cross-check that the ist_exit boolean matches the entry vector.
Write check_ist_exit() it in C, because it's debug only and the logic more
complicated than I care to maintain in asm.
For now, we only need to use this signal in the exit-to-Xen path, but some
exit-to-guest paths happen in IST context too. Check the correctness in all
exit paths to avoid the logic bit-rotting.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 21bdc25b05)
x86/entry: Partially revert IST-exit checks
The patch adding check_ist_exit() didn't account for the fact that
reset_stack_and_jump() is not an ABI-preserving boundary. The IST-ness in
%r12 doesn't survive into the next context, and is a stale value C.
This shows up in Gitlab CI for the Clang build:
https://gitlab.com/xen-project/people/andyhhp/xen/-/jobs/5112783827
and in OSSTest for GCC 8:
http://logs.test-lab.xenproject.org/osstest/logs/183045/test-amd64-amd64-xl-qemuu-debianhvm-amd64/serial-pinot0.log
There's no straightforward way to reconstruct the IST-exit-ness on the
exit-to-guest path after a context switch. For now, we only need IST-exit on
the return-to-Xen path.
Fixes: 21bdc25b05 ("x86/entry: Track the IST-ness of an entry for the exit paths")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 9b57c800b7)
All other SPEC_CTRL_{ENTRY,EXIT}_* helpers hold stack_end in %r14. Adjust it
for consistency.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 7aa28849a1)
... to better explain how they're used.
Doing so highlights that SPEC_CTRL_EXIT_TO_XEN is missing a VERW flush for the
corner case when e.g. an NMI hits late in an exit-to-guest path.
Leave a TODO, which will be addressed in subsequent patches which arrange for
VERW flushing to be safe within SPEC_CTRL_EXIT_TO_XEN.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 45f0055735)
These have grown more complex over time, with some already having been
converted.
Provide full Requires/Clobbers comments, otherwise missing at this level of
indirection.
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 7125429aaf)
With the SPEC_CTRL_EXIT_TO_XEN{,_IST} confusion fixed, it's now obvious that
there's only a single EXIT_TO_XEN path. Fold DO_SPEC_CTRL_EXIT_TO_XEN into
SPEC_CTRL_EXIT_TO_XEN to simplify further fixes.
When merging labels, switch the name to .L\@_skip_sc_msr as "skip" on its own
is going to be too generic shortly.
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 694bb0f280)
c/s 3fffaf9c13 ("x86/entry: Avoid using alternatives in NMI/#MC paths")
dropped the only user, leaving behind the (incorrect) implication that Xen had
split exit paths.
Delete the unused SPEC_CTRL_EXIT_TO_XEN and rename SPEC_CTRL_EXIT_TO_XEN_IST
to SPEC_CTRL_EXIT_TO_XEN for consistency.
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 1c18d73774)
GDS_CTRL is introduced by the August 2023 microcode. GDS_NO is for current
and future processors not susceptible to GDS.
This is part of XSA-435 / CVE-2022-40982
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 9f585f59d9)
The August 2023 microcode for GDS has an impact on the CLWB instruction. See
code comments for full details.
This is part of XSA-435 / CVE-2022-40982
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 2dd06b4ea1)
On native, synthesise the SRSO bits by probing various hardware properties as
given by AMD.
Extend the IBPB-on-entry mitigations to Zen3/4 CPUs. There is a microcode
prerequisite to make this an effective mitigation.
This is part of XSA-434 / CVE-2023-20569
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
(cherry picked from commit 220c06e6fe)
AMD have specified new CPUID bits relating to SRSO.
* SRSO_NO indicates that hardware is no longer vulnerable to SRSO.
* IBPB_BRTYPE indicates that IBPB flushes branch type information too.
* SBPB indicates support for a relaxed form of IBPB that does not flush
branch type information.
Current CPUs (Zen4 and older) are not expected to enumerate these bits.
Native software is expected to synthesise them for guests using model and
microcode revision checks.
Two are just status bits, and SBPB is trivial to support for guests by
tweaking the reserved bit calculation in guest_wrmsr() and feature
dependencies. Expose all by default to guests, so they start showing up when
Xen synthesises them.
While adding feature dependenies for IBPB, fix up an overlooked issue from
XSA-422. It's inappropriate to advertise that IBPB flushes RET predictions if
IBPB is unavailable itself.
This is part of XSA-434 / CVE-2023-20569
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
(cherry picked from commit 2280b0ee2a)
... in order to make the SRSO mitigations easier to integrate.
* Check for AMD/Hygon CPUs directly, rather than assuming based on IBPB.
In particular, Xen supports synthesising the IBPB bit to guests on Intel to
allow IBPB while dissuading the use of (legacy) IBRS.
* Collect def_ibpb_entry rather than opencoding the BTC_NO calculation for
both opt_ibpb_entry_{pv,hvm}.
No functional change.
This is part of XSA-434 / CVE-2023-20569
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
(cherry picked from commit 292f68fb77)
With xl/libxl now able to control the policy bits for MSR_ARCH_CAPS, it is
safe to advertise to guests by default. In turn, we don't need the special
case to expose details to dom0.
This advertises MSR_ARCH_CAPS to guests on *all* Intel hardware, even if the
register content ends up being empty.
- Advertising ARCH_CAPS and not RSBA signals "retpoline is safe here and
everywhere you might migrate to". This is important because it avoids the
guest kernel needing to rely on model checks.
- Alternatively, levelling for safety across the Broadwell/Skylake divide
requires advertising ARCH_CAPS and RSBA, meaning "retpoline not safe on
some hardware you might migrate to".
On Cascade Lake and later hardware, guests can now see RDCL_NO (not vulnerable
to Meltdown) amongst others. This causes substantial performance
improvements, as guests are no longer applying software mitigations in cases
where they don't need to.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 4b2cdbfe76)
The RSBA bit, "RSB Alternative", means that the RSB may use alternative
predictors when empty. From a practical point of view, this mean "Retpoline
not safe".
Enhanced IBRS (officially IBRS_ALL in Intel's docs, previously IBRS_ATT) is a
statement that IBRS is implemented in hardware (as opposed to the form
retrofitted to existing CPUs in microcode).
The RRSBA bit, "Restricted-RSBA", is a combination of RSBA, and the eIBRS
property that predictions are tagged with the mode in which they were learnt.
Therefore, it means "when eIBRS is active, the RSB may fall back to
alternative predictors but restricted to the current prediction mode". As
such, it's stronger statement than RSBA, but still means "Retpoline not safe".
CPUs are not expected to enumerate both RSBA and RRSBA.
Add feature dependencies for EIBRS and RRSBA. While technically they're not
linked, absolutely nothing good can come of letting the guest see RRSBA
without EIBRS. Nor a guest seeing EIBRS without IBRSB. Furthermore, we use
this dependency to simplify the max derivation logic.
The max policies gets RSBA and RRSBA unconditionally set (with the EIBRS
dependency maybe hiding RRSBA). We can run any VM, even if it has been told
"somewhere you might run, Retpoline isn't safe".
The default policies are more complicated. A guest shouldn't see both bits,
but it needs to see one if the current host suffers from any form of RSBA, and
which bit it needs to see depends on whether eIBRS is visible or not.
Therefore, the calculation must be performed after sanitise_featureset().
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit e0586a4ff5)
In order to level a VM safely for migration, the toolstack needs to know the
RSBA/RRSBA properties of the CPU, whether or not they happen to be enumerated.
See the code comment for details.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 36525a964f)
This is prep work, split out to simply the diff on the following change.
* Rename to retpoline_calculations(), and call unconditionally. It is
shortly going to synthesise missing enumerations required for guest safety.
* For the model check switch statement, store the result in a variable and
break rather than returning directly.
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 724c0d94ff)
Reword the comment for 'S' to include an incompatible set of features on the
same core.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 3f63f45104)
FB_CLEAR is a read-only status bit, not a read-write control. Move it from
"Hardware features" into "Hardware hints".
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 921afcbae8)
This is prep work, split out to simply the diff on the following change.
* Split the INTEL check out of the IvyBridge RDRAND check, as the former will
be reused.
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 064f572f96)
* Rename IBRS_ALL to EIBRS. EIBRS is the term that everyone knows, and this
makes ARCH_CAPS_EIBRS match the X86_FEATURE_EIBRS form.
* Print RRSBA too, which is also a hint about behaviour.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 94200e1bae)
MSR_ARCH_CAPS data is now included in featureset information. Replace
opencoded checks with regular feature ones.
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 511b9f286c)
The current cpu_has_tsx_ctrl tristate is serving double pupose; to signal the
first pass through tsx_init(), and the availability of MSR_TSX_CTRL.
Drop the variable, replacing it with a once boolean, and altering
cpu_has_tsx_ctrl to come out of the feature information.
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 205a9f9703)
We already have common and default feature adjustment helpers. Introduce one
for max featuresets too.
Offer MSR_ARCH_CAPS unconditionally in the max policy, and stop clobbering the
data inherited from the Host policy. This will be necessary to level a VM
safely for migration. Annotate the ARCH_CAPS CPUID bit as special. Note:
ARCH_CAPS is still max-only for now, so will not be inhereted by the default
policies.
With this done, the special case for dom0 can be shrunk to just resampling the
Host policy (as ARCH_CAPS isn't visible by default yet).
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit bbb289f3d5)
Extend x86_cpu_policy_fill_native() with a read of ARCH_CAPS based on the
CPUID information just read, removing the specially handling in
calculate_raw_cpu_policy().
Right now, the only use of x86_cpu_policy_fill_native() outside of Xen is the
unit tests. Getting MSR data in this context is left to whomever first
encounters a genuine need to have it.
Extend generic_identify() to read ARCH_CAPS into x86_capability[], which is
fed into the Host Policy. This in turn means there's no need to special case
arch_caps in calculate_host_policy().
No practical change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 70553000d6)
Seed the default visibility from the dom0 special case, which for the most
part just exposes the *_NO bits. EIBRS is the one non-*_NO bit, which is
"just" a status bit to the guest indicating a change in implemention of IBRS
which is already fully supported.
Insert a block dependency from the ARCH_CAPS CPUID bit to the entire content
of the MSR. This is because MSRs have no structure information similar to
CPUID, and used by x86_cpu_policy_clear_out_of_range_leaves(), in order to
bulk-clear inaccessable words.
The overall CPUID bit is still max-only, so all of MSR_ARCH_CAPS is hidden in
the default policies.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit ce8c930851)
Bits through 24 are already defined, meaning that we're not far off needing
the second word. Put both in right away.
As both halves are present now, the arch_caps field is full width. Adjust the
unit test, which notices.
The bool bitfield names in the arch_caps union are unused, and somewhat out of
date. They'll shortly be automatically generated.
Add CPUID and MSR prefixes to the ./xen-cpuid verbose output, now that there
are a mix of the two.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit d9fe459ffa)
We are about to move MSR_ARCH_CAPS into featureset, but the order of
operations (copy raw policy, then copy x86_capabilitiles[] in) will end up
clobbering the ARCH_CAPS value.
Some toolstacks use this information to handle TSX compatibility across the
CPUs and microcode versions where support was removed.
To avoid this transient breakage, read from raw_cpu_policy rather than
modifying it in place. This logic will be removed entirely in due course.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 43912f8dbb)
Right now, dom0's feature configuration is split between between the common
path and a dom0-specific one. This mostly is by accident, and causes some
very subtle bugs.
First, start by clearly defining init_dom0_cpuid_policy() to be the domain
that Xen builds automatically. The late hwdom case is still constructed in a
mostly normal way, with the control domain having full discretion over the CPU
policy.
Identifying this highlights a latent bug - the two halves of the MSR_ARCH_CAPS
bodge are asymmetric with respect to the hardware domain. This means that
shim, or a control-only dom0 sees the MSR_ARCH_CAPS CPUID bit but none of the
MSR content. This in turn declares the hardware to be retpoline-safe by
failing to advertise the {R,}RSBA bits appropriately. Restrict this logic to
the hardware domain, although the special case will cease to exist shortly.
For the CPUID Faulting adjustment, the comment in ctxt_switch_levelling()
isn't actually relevant. Provide a better explanation.
Move the recalculate_cpuid_policy() call outside of the dom0-cpuid= case.
This is no change for now, but will become necessary shortly.
Finally, place the second half of the MSR_ARCH_CAPS bodge after the
recalculate_cpuid_policy() call. This is necessary to avoid transiently
breaking the hardware domain's view while the handling is cleaned up. This
special case will cease to exist shortly.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit ef1987fcb0)
When adding new featureset words, it is convenient to split the work into
several patches. However, GCC 12 spotted that the way we prefer to split the
work results in a real (transient) breakage whereby the policy <-> featureset
helpers perform out-of-bounds accesses on the featureset array.
Fix this by having gen-cpuid.py calculate FEATURESET_NR_ENTRIES from the
comments describing the word blocks, rather than from the XEN_CPUFEATURE()
with the greatest value.
For simplicty, require that the word blocks appear in order. This can be
revisted if we find a good reason to have blocks out of order.
No functional change.
Reported-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 56e2c8e586)
With all code areas updated, drop the temporary defines and adjust all
remaining users.
No practical change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 994c1553a1)
Adjust the API and comments appropriately.
x86_cpu_policy_fill_native() will eventually contain MSR reads, but leave a
TODO in the short term.
No practical change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 1b67fccf3b)
tools/libs/guest: Fix build following libx86 changes
I appear to have lost this hunk somewhere...
Fixes: 1b67fccf3b ("libx86: Update library API for cpu_policy")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
(cherry picked from commit 48d76e6da9)
With cpuid_policy and msr_policy merged to form cpu_policy, merge the
respective fuzzing logic.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit a16dcd48c2)
As with struct domain, retain cpuid as a valid alias for local code clarity.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 441b1b2a50)
Switch to the newer cpu_policy nomenclature. Do some easy cleanup of
includes.
No practical change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 8eb56eb959)
These are already getting over-large for being inline functions, and are only
going to grow further over time. Out of line them, yielding the following net
delta from bloat-o-meter:
add/remove: 2/0 grow/shrink: 0/4 up/down: 276/-1877 (-1601)
Switch to the newer cpu_policy terminology while doing so.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 1027df4c00)
With all the complicated callers of x86_cpu_policies_are_compatible() updated
to use a single cpu_policy object, we can drop the final user of struct
old_cpu_policy.
Update x86_cpu_policies_are_compatible() to take (new) cpu_policy pointers,
reducing the amount of internal pointer chasing, and update all callers to
pass their cpu_policy objects directly.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 66c5c99656)
Right now, they're the same underlying type, containing disjoint information.
Use a single object instead. Also take the opportunity to rename 'entries' to
'msrs' which is more descriptive, and more in line with nr_msrs being the
count of MSR entries in the API.
test-tsx uses xg_private.h to access the internals of xc_cpu_policy, so needs
updating at the same time. Take the opportunity to improve the code clarity
by passing a cpu_policy rather than an xc_cpu_policy into some functions.
No practical change. This undoes the transient doubling of storage space from
earlier patches.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit c9985233ca)
Right now, they're the same underlying type, containing disjoint information.
Drop the d->arch.msr pointer, and union d->arch.cpuid to give it a second name
of cpu_policy in the interim.
Merge init_domain_{cpuid,msr}_policy() into a single init_domain_cpu_policy(),
moving the implementation into cpu-policy.c
No practical change. This undoes the transient doubling of storage space from
earlier patches.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit bd13dae348)
Right now, they're the same underlying type, containing disjoint information.
Introduce a new cpu-policy.{h,c} to be the new location for all policy
handling logic. Place the combined objects in __ro_after_init, which is new
since the original logic was written.
As we're trying to phase out the use of struct old_cpu_policy entirely, rework
update_domain_cpu_policy() to not pointer-chase through system_policies[].
This in turn allows system_policies[] in sysctl.c to become static and reduced
in scope to XEN_SYSCTL_get_cpu_policy.
No practical change. This undoes the transient doubling of storage space from
earlier patches.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 6bc3336679)
As with the cpuid side, use a temporary define to make struct msr_policy still
work.
Note, this means that domains now have two separate struct cpu_policy
allocations with disjoint information, and system policies are in a similar
position, as well as xc_cpu_policy objects in libxenguest. All of these
duplications will be addressed in the following patches.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 03812da375)
Also merge lib/x86/cpuid.h entirely into lib/x86/cpu-policy.h
Use a temporary define to make struct cpuid_policy still work.
There's one forward declaration of struct cpuid_policy in
tools/tests/x86_emulator/x86-emulate.h that isn't covered by the define, and
it's easier to rename that now than to rearrange the includes.
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 743e530380)
These weren't great names to begin with, and using {leaves,msrs} matches up
better with the existing nr_{leaves,msr} parameters anyway.
Furthermore, by renaming these fields we can get away with using some #define
trickery to avoid the struct {cpuid,msr}_policy merge needing to happen in a
single changeset.
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 21e3ef57e0)
xen: Correct comments after renaming xen_{dom,sys}ctl_cpu_policy fields
Fixes: 21e3ef57e0 ("x86: Rename {domctl,sysctl}.cpu_policy.{cpuid,msr}_policy fields")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
(cherry picked from commit 6e06d229d5)
We want to merge struct cpuid_policy and struct msr_policy together, and the
result wants to be called struct cpu_policy.
The current struct cpu_policy, being a pair of pointers, isn't terribly
useful. Rename the type to struct old_cpu_policy, but it will disappear
entirely once the merge is complete.
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit c2ec94c370)
Featuresets are supposed to be disappearing when the CPU policy infrastructure
is complete, but that has taken longer than expected, and isn't going to be
complete imminently either.
In the meantime, Xen does have proper default/max featuresets, and xen-cpuid
can even get them via the XEN_SYSCTL_cpu_policy_* interface, but only knows
now to render them nicely via the featureset interface.
Differences between default and max are a frequent source of errors,
frequently too in secret leading up to an embargo, so extend the featureset
sysctl to allow xen-cpuid to render them all nicely.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Christian Lindig <christian.lindig@cloud.com>
(cherry picked from commit 433d012c6c)
struct fsinfo is the vestigial remnant of an older internal design which
didn't survive very long.
Simplify things by inlining get_featureset() and having a single memory
allocation that gets reused. This in turn changes featuresets[] to be a
simple list of names, so rename it to fs_names[].
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit ec3474e1dd)
Specifically, this lets the user opt in to non-default features.
Collect all dom0 settings together in dom0_{en,dis}able_feat[], and apply it
to dom0's policy when other tweaks are being made.
As recalculate_cpuid_policy() is an expensive action, and dom0-cpuid= is
likely to only be used by the x86 maintainers for development purposes, forgo
the recalculation in the general case.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 5bd2b82df2)
dom0-cpuid= is going to want to reuse the common parsing loop, so factor it
out into parse_cpuid().
Irritatingly, despite being static const, the features[] array gets duplicated
each time parse_cpuid() is inlined. As it is a large (and ever growing with
new CPU features) datastructure, move it to being file scope so all inlines
use the same single object.
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 94c3df9188)
To implement dom0-cpuid= support, the special cases would need extending.
However there is already a problem with late hwdom where the special cases
override toolstack settings, which is unintended and poor behaviour.
Introduce a new init_dom0_cpuid_policy() for the purpose, moving the ITSC and
ARCH_CAPS logic. The is_hardware_domain() can be dropped, and for now there
is no need to rerun recalculate_cpuid_policy(); this is a relatively expensive
operation, and will become more-so over time.
Rearrange the logic in create_dom0() to make room for a call to
init_dom0_cpuid_policy(). The AMX plans for having variable sized XSAVE
states require that modifications to the policy happen before vCPUs are
created.
Additionally, factor out domid into a variable so we can be slightly more
correct in the case of a failure, and also print the error from
domain_create(). This will at least help distinguish -EINVAL from -ENOMEM.
No practical change in behaviour.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit c17072fc16)
Gitlab reports:
init.c:348:18: error: implicit truncation from 'int' to a one-bit wide bit-field changes value from 1 to -1 [-Werror,-Wsingle-bit-bitfield-constant-conversion]
ctrl->is_server = 1;
^ ~
1 error generated.
make[6]: *** [/builds/xen-project/people/andyhhp/xen/tools/libs/vchan/../../../tools/Rules.mk:188: init.o] Error 1
In Xen 4.18, this was fixed with c/s 99ab02f63e ("tools: convert bitfields
to unsigned type") but this is an ABI change which can't be backported.
Swich 1 for -1 to provide a minimally invasive way to fix the build.
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
The opensuse-tumbleweed build jobs currently fail with:
/builds/xen-project/xen/stubdom/tpm_emulator-x86_64/crypto/rsa.c: In function 'rsa_private':
/builds/xen-project/xen/stubdom/tpm_emulator-x86_64/crypto/rsa.c:56:7: error: the comparison will always evaluate as 'true' for the address of 'p' will never be NULL [-Werror=address]
56 | if (!key->p || !key->q || !key->u) {
| ^
In file included from /builds/xen-project/xen/stubdom/tpm_emulator-x86_64/crypto/rsa.c:17:
/builds/xen-project/xen/stubdom/tpm_emulator-x86_64/crypto/rsa.h:28:12: note: 'p' declared here
28 | tpm_bn_t p;
| ^
This is because all tpm_bn_t's are 1-element arrays (of either a GMP or
OpenSSL BIGNUM flavour).
Adjust it to compile. No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jason Andryuk <jandryuk@gmail.com>
(cherry picked from commit 46c5ef609b)
This line:
val &= ~chickenbit;
ends up truncating val to 32 bits, and turning off various errata workarounds
in Zen2 systems.
Fixes: f91c5ea970 ("x86/amd: Mitigations for Zenbleed")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit c0dd53b8cb)
Zenbleed is a malfunction on AMD Zen2 uarch parts which results in corruption
of the vector registers. An attacker can trigger this bug deliberately in
order to access stale data in the physical vector register file. This can
include data from sibling threads, or a higher-privilege context.
Microcode is the preferred mitigation but in the case that's not available use
the chickenbit as instructed by AMD. Re-evaluate the mitigation on late
microcode load too.
This is XSA-433 / CVE-2023-20593.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
(cherry picked from commit f91c5ea970)
Clang-15 (as seen in the FreeBSD 14 tests) complains:
xg_main.c:1248 error: a function declaration without a
prototype is deprecated in all versions of C [-Werror,-Wstrict-prototypes]
xg_init()
^
void
The error message is a bit confusing but appears to new as part of
-Wdeprecated-non-prototype which is part of supporting C2x which formally
removes K&R syntax.
Either way, fix the identified function.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
master commit: e2312e41f0
master date: 2023-02-17 11:01:54 +0000
Clang-15 (as seen in the FreeBSD 14 tests) complains:
arch/x86/time.c:1364:20: error: a function declaration without a
prototype is deprecated in all versions of C [-Werror,-Wstrict-prototypes]
s_time_t get_s_time()
^
void
The error message is a bit confusing but appears to new as part of
-Wdeprecated-non-prototype which is part of supporting C2x which formally
removes K&R syntax.
Either way, fix the identified functions.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Backport: Also deal with powernow_register_driver() and flush_all_cache().
master commit: 22b2fa4766
master date: 2023-02-17 11:01:54 +0000
It is rude to hide width formatting inside a PRI* macro, doubly so when it's
only in one bitness of the macro.
However its fully buggy when all the users use %#"PRI because then it expands
to the common trap of %#08x which does not do what the author intends.
Switch the 32bit ELF PRI formatters to use plain integer PRI's, just like on
the 64bit side already. No practical change.
Fixes: 7597fabca7 ("livepatch: Include sizes when an mismatch occurs")
Fixes: 380b229634 ("xsplice: Implement payload loading")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Ross Lagerwall <ross.lagerwall@citrix.com>
master commit: cfa2bb82c0
master date: 2023-04-19 15:55:29 +0100
Right now, trying to apply a livepatch on any system with CET shstk (AMD Zen3
or later, Intel Tiger Lake or Sapphire Rapids and later) fails as follows:
(XEN) livepatch: lp: Verifying enabled expectations for all functions
(XEN) common/livepatch.c:1591: livepatch: lp: timeout is 30000000ns
(XEN) common/livepatch.c:1703: livepatch: lp: CPU28 - IPIing the other 127 CPUs
(XEN) livepatch: lp: Applying 1 functions
(XEN) hi_func: Hi! (called 1 times)
(XEN) Hook executing.
(XEN) Assertion 'local_irq_is_enabled() || cpumask_subset(mask, cpumask_of(cpu))' failed at arch/x86/smp.c:265
(XEN) *** DOUBLE FAULT ***
<many double faults>
The assertion failure is from a global (system wide) TLB flush initiated by
modify_xen_mappings(). I'm not entirely sure when this broke, and I'm not
sure exactly what causes the #DF's, but it doesn't really matter either
because they highlight a latent bug that I'd overlooked with the CET-SS vs
patching work the first place.
While we're careful to arrange for the patching CPU to avoid encountering
non-shstk memory with transient shstk perms, other CPUs can pick these
mappings up too if they need to re-walk for uarch reasons.
Another bug is that for livepatching, we only disable CET if shadow stacks are
in use. Running on Intel CET systems when Xen is only using CET-IBT will
crash in arch_livepatch_quiesce() when trying to clear CR0.WP with CR4.CET
still active.
Also, we never went and cleared the dirty bits on .rodata. This would
matter (for the same reason it matters on .text - it becomes a valid target
for WRSS), but we never actually patch .rodata anyway.
Therefore rework how we do patching for both alternatives and livepatches.
Introduce modify_xen_mappings_lite() with a purpose similar to
modify_xen_mappings(), but stripped down to the bare minimum as it's used in
weird contexts. Leave all complexity to the caller to handle.
Instead of patching by clearing CR0.WP (and having to jump through some
fragile hoops to disable CET in order to do this), just transiently relax the
permissions on .text via l2_identmap[].
Note that neither alternatives nor livepatching edit .rodata, so we don't need
to relax those permissions at this juncture.
The perms are relaxed globally, but this is safe enough. Alternatives run
before we boot APs, and Livepatching runs in a quiesced state where the other
CPUs are not doing anything interesting.
This approach is far more robust.
Fixes: 48cdc15a42 ("x86/alternatives: Clear CR4.CET when clearing CR0.WP")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Ross Lagerwall <ross.lagerwall@citrix.com>
master commit: 8676092a0f
master date: 2023-04-18 20:20:26 +0100
The Long Mode consistency checks exist to "ensure that the processor does not
enter an undefined mode or state that results in unpredictable behavior". APM
Vol2 Table 14-5 "Long-Mode Consistency Checks" lists them, but there is no row
preventing the OS from trying to exit Long mode while in 64bit mode. This
could leave the CPU in Protected Mode with an %rip above the 4G boundary.
Experimentally, AMD CPUs really do permit this state transition. An OS which
tries it hits an instant SHUTDOWN, even in cases where the truncation I expect
to be going on behind the scenes ought to result in sane continued execution.
Furthermore, right from the very outset, the APM Vol2 14.7 "Leaving Long Mode"
section instructs peoples to switch to a compatibility mode segment first
before clearing CR0.PG, which does clear out the upper bits in %rip. This is
further backed up by Vol2 Figure 1-6 "Operating Modes of the AMD64
Architecture".
Either way, this appears to have been a genuine oversight in the AMD64 spec.
Intel, on the other hand, rejects this state transition with #GP.
Between revision 71 (Nov 2019) and 72 (May 2020) of SDM Vol3, a footnote to
4.1.2 "Paging-Mode Enable" was altered from
If CR4.PCIDE= 1, an attempt to clear CR0.PG causes a general-protection
exception (#GP); software should clear CR4.PCIDE before attempting to
disable paging.
to
If the logical processor is in 64-bit mode or if CR4.PCIDE= 1, an attempt to
clear CR0.PG causes a general-protection exception (#GP). Software should
transition to compatibility mode and clear CR4.PCIDE before attempting to
disable paging.
which acknowledges this corner case, but there doesn't appear to be any other
discussion even in the relevant Long Mode sections.
So it appears that Intel spotted and addressed the corner case in IA-32e mode,
but were 15 years late to document it.
Xen was written to the AMD spec, and misses the check. Follow the Intel
behaviour, because it is more sensible and avoids hitting a VMEntry failure.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
master commit: 18c128ba66
master date: 2023-04-14 18:18:20 +0100
For similar reasons to c/s a6b1e2b80f. While this container is still
build-able for now, all the other problems with explicitly-versioned compilers
remain.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
(cherry picked from commit 7a29837572)
Having 3 extra hypervisor builds on the end of a full build is deeply
confusing to debug if one of them fails, because the .config file presented in
the artefacts is not the one which caused a build failure. Also, the log
tends to be truncated in the UI.
PV-only is tested as part of PV-Shim in a full build anyway, so doesn't need
repeating. HVM-only and neither appear frequently in randconfig, so drop all
the logic here to simplify things.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
(cherry picked from commit 7b20009a81)
These two early exits skipped re-enabling the watchdog, restoring the NMI
callback, and clearing the nmi_patch global pointer. Always execute the tail
of the function on the way out.
Fixes: 8dd4dfa92d ("x86/microcode: Synchronize late microcode loading")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Sergey Dyasli <sergey.dyasli@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
master commit: fc2e1f3aad
master date: 2023-03-28 11:57:56 +0100
In VMX operation, the handling of INIT IPIs is changed. Instead of the CPU
resetting, the next VMEntry fails with EXIT_REASON_INIT. From the TXT spec,
the intent of this behaviour is so that an entity which cares can scrub
secrets from RAM before participating in an orderly shutdown.
Right now, Xen's behaviour is that when an INIT arrives, the HVM VM which
schedules next is killed (citing an unknown VMExit), *and* we ignore the INIT
and continue blindly onwards anyway.
This patch addresses only the first of these two problems by ignoring the INIT
and continuing without crashing the VM in question.
The second wants addressing too, just as soon as we've figured out something
better to do...
Discovered as collateral damage from when an AP triple faults on S3 resume on
Intel TigerLake platforms.
Link: https://github.com/QubesOS/qubes-issues/issues/7283
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
master commit: b1f11273d5
master date: 2023-03-24 22:49:58 +0000
Gitlab Randconfig found:
arch/x86/mm/shadow/common.c: In function 'shadow_prealloc':
arch/x86/mm/shadow/common.c:1023:18: error: implicit declaration of function
'paging_logdirty_levels'; did you mean 'paging_log_dirty_init'? [-Werror=implicit-function-declaration]
1023 | count += paging_logdirty_levels();
| ^~~~~~~~~~~~~~~~~~~~~~
| paging_log_dirty_init
arch/x86/mm/shadow/common.c:1023:18: error: nested extern declaration of 'paging_logdirty_levels' [-Werror=nested-externs]
The '#if PG_log_dirty' expression is currently SHADOW_PAGING && !HVM &&
PV_SHIM_EXCLUSIVE. Move the declaration outside.
Fixes: 33fb3a6612 ("x86/shadow: account for log-dirty mode when pre-allocating")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
master commit: 6d14cb105b
master date: 2023-03-24 12:16:31 +0000
Andrew Cooper